GPS03-Router6675_ConnectivityDigitalCable

Prévia do material em texto

Carlos Renato Rodrigues | carlos.r.rodrigues@ericsson.cm | PA1 | 2019-06-19 | Ericsson Confidential | Page 1 (5)
GPS03 –Router 6675
Connectivity diagram and Digital Cable
Carlos Renato Rodrigues | carlos.r.rodrigues@ericsson.cm | PA1 | 2019-06-19 | Ericsson Confidential | Page 2 (5)
GPS-Router connectivity diagram
GPS Active Antenna
GPS 03 01; GPS Receiver Unit
Indoor
Outdoor
Digital Cable
Router 6675
Carlos Renato Rodrigues | carlos.r.rodrigues@ericsson.cm | PA1 | 2019-06-19 | Ericsson Confidential | Page 3 (5)
The 1PPS+TOD port can also be used to connect
Ericsson GPS 03. When the device is connected to
Ericsson GPS 03 through the 1PPS+TOD port, a
special digital cable must be used due to the
different pin-out of the Ericsson GPS 03 ToD port.
However, Ericsson does not provide the digital
cable for the device. You can make the cable as
required.
Digital Cable
Router 6675
ToD Port
GPS 03
Port 1
Carlos Renato Rodrigues | carlos.r.rodrigues@ericsson.cm | PA1 | 2019-06-19 | Ericsson Confidential | Page 4 (5)
After installation, fill in the blue 
boxes with the length (meters) of 
each cable used in the 
installation
Cable-Delay
_______meters
Antenna Unit
Module GPS
_______meters
_______meters
Router 6675
___________________________Site name