Contributors_2024_Advances-in-Biofuels-Production--Optimization-and-Applicat

Prévia do material em texto

Contributors
Ramez Abdallah Mechanical & Mechatronics Engineering
Department—Faculty of Engineering & Information Tech-
nology, An-Najah National University, Nablus, Palestine
Jose M. Abelleira-Pereira Department of Chemical Engineer-
ing and Food Technology, Faculty of Sciences, University of
Cádiz, Puerto Real, Cádiz, Spain
Aiman Albatayneh School of Natural Resources Engineering
and Management, German Jordanian University, Amman,
Jordan
Humira Assad Department of Chemistry, Faculty of Technol-
ogy and Science, Lovely Professional University, Phagwara,
Punjab, India
Rahul Baidya Centre for Research and Innovation (CRI),
Department of Mechanical Engineering, Institute of Engi-
neering & Management, Kolkata, India
Hakan Caliskan Department of Mechanical Engineering, Fac-
ulty of Engineering, Usak University, Usak, Turkey
Fabiane Fernanda de Barros Ranke Biotecnology Department,
Faculty of Science and Letters, São Paulo State University,
UNESP, Assis, SP, Brazil
Pedro de Oliva Neto Biotecnology Department, Faculty of
Science and Letters, São Paulo State University, UNESP,
Assis, SP, Brazil
Hong Du Dalian National Laboratory for Clean Energy,
Dalian Institute of Chemical Physics, Chinese Academy of
Sciences, Dalian, China
Flora N. Ezugworie Department of Microbiology, Faculty of
Biological Sciences; Bioconversion and Renewable Energy
Research Unit, University of Nigeria, Nsukka; Department of
Applied Sciences, Faculty of Pure and Applied Sciences,
Federal College of Dental Technology and Therapy, Enugu,
Enugu State, Nigeria
Bel�en Garcı́a-Jarana Department of Chemical Engineering
and Food Technology, Faculty of Sciences, University of
Cádiz, Puerto Real, Cádiz, Spain
Sadhan Kumar Ghosh Sustainable Development & Circular
Economy Research Centre, International Society of Waste
Management, Air and Water (ISWMAW), Kolkata, India
Dovil _e Gimžauskait _e Lithuanian Energy Institute, Plasma
Processing Laboratory, Kaunas, Lithuania
Janani Gurumurthy School of Biosciences and Technology,
Vellore Institute of Technology, Vellore, Tamil Nadu, India
Pedro Haro Chemical and Environmental Engineering
Department, Escuela T�ecnica Superior de Ingeniería,
Universidad de Sevilla, Camino de los Descubrimientos,
Seville, Spain
vii
Muna Hindiyeh School of Natural Resources Engineering
and Management, German Jordanian University, Amman,
Jordan
Bin Hu National Engineering Research Center of New Energy
Power Generation, Beijing, P.R. China
Victor C. Igbokwe Bioconversion and Renewable Energy
Research Unit, University of Nigeria, Nsukka, Enugu State,
Nigeria; Bio-InspiredMaterials, Universite de Pau et des Pays
de l’Adour, Pau, France
Mejdi Jeguirim The Institute of Materials Science of Mulhouse
(IS2M), University of Haute Alsace, University of Strasbourg,
Mulhouse, France
Salah Jellali PEIE Research Chair for the Development of
Industrial Estates and Free Zones, Center for Environmental
Studies and Research, Sultan Qaboos University, Muscat,
Oman
Adel Juaidi Mechanical & Mechatronics Engineering
Department—Faculty of Engineering & Information Tech-
nology, An-Najah National University, Nablus, Palestine
Christian Kennes University of La Coruña, Chemical
Engineering Laboratory, Faculty of Sciences and Center for
Advanced Scientific Research/Centro de Investigaciones
Científicas Avanzadas (CICA), La Coruña, Spain
David M. Kennes-Veiga CRETUS, Department of Chemical
Engineering, University of Santiago de Compostela, Santiago
de Compostela, Spain
Besma Khiari Wastewaters and Environment Laboratory,
Water Research and Technologies Center (CERTE),
Technopark Borj Cedria, University of Carthage, Soliman,
Tunisia
Ashish Kumar NCE, Bihar Engineering University, Depart-
ment of Science and Technology, Government of Bihar, Bihar,
India
Yang Li National Engineering Research Center of New Energy
Power Generation, Beijing, P.R. China
Dan Liu Dalian National Laboratory for Clean Energy, Dalian
Institute of Chemical Physics, Chinese Academy of Sciences,
Dalian, China
Ji Liu National Engineering Research Center of New Energy
Power Generation, Beijing, P.R. China
Qiang Lu National Engineering Research Center of New
Energy Power Generation, Beijing, P.R. China
Juan J. Mascarell Department of Chemical Engineering and
Food Technology, Faculty of Sciences, University of Cádiz,
Puerto Real, Cádiz, Spain
viii Contributors
Kazutoshi Mori Faculty & Graduate School of Science and
Engineering, Teikyo University, Toyosatodai, Utsunomiya,
Tochigi, Japan
Cecilia Naveira-Pazos University of La Coruña, Chemical
Engineering Laboratory, Faculty of Sciences and Center for
Advanced Scientific Research/Centro de Investigaciones
Científicas Avanzadas (CICA), La Coruña, Spain
Chukwudi O. Onwosi Department of Microbiology, Faculty of
Biological Sciences, University of Nigeria, Nsukka, Enugu
State, Nigeria; Karen M. Swindler Department of Chemical
and Biological Engineering, South Dakota School of Mines
and Technology, Rapid City, South Dakota, United States;
Bioconversion and Renewable Energy Research Unit,
University of Nigeria, Nsukka, Enugu State, Nigeria
Chioma L. Onyishi Department of Microbiology, Faculty of
Biological Sciences; Bioconversion and Renewable Energy
Research Unit, University of Nigeria, Nsukka, Enugu State,
Nigeria
Iliana Papamichael Laboratory of Chemical Engineering and
Engineering Sustainability, Faculty of Pure and Applied
Sciences, Open University of Cyprus, Nicosia, Cyprus
Ulhas V. Parlikar Global Consultant, Bangalore, India
Juan R. Portela Department of Chemical Engineering and
Food Technology, Faculty of Sciences, University of Cádiz,
Puerto Real, Cádiz, Spain
Mythili Sathiavelu School of Biosciences and Technology,
Vellore Institute of Technology, Vellore, Tamil Nadu,
India
Gayathri Segaran School of Biosciences and Technology,
Vellore Institute of Technology, Vellore, Tamil Nadu, India
Pearl Shah School of Biosciences and Technology, Vellore
Institute of Technology, Vellore, Tamil Nadu, India
Constantine Spandagos Department of Natural Resources and
the Environment, University of New Hampshire, Durham,
NH, United States; Economic and Social Research Institute,
Dublin, Ireland; Department of Economics, Trinity College
Dublin, Dublin, Ireland
Marinos Stylianou Laboratory of Chemical Engineering and
Engineering Sustainability, Faculty of Pure and Applied
Sciences, Open University of Cyprus, Nicosia, Cyprus
Andrius Tamoši�unas Lithuanian Energy Institute, Plasma
Processing Laboratory, Kaunas, Lithuania
Marı́a C. Veiga University of La Coruña, Chemical Engineer-
ing Laboratory, Faculty of Sciences and Center for Advanced
Scientific Research/Centro de Investigaciones Científicas
Avanzadas (CICA), La Coruña, Spain
Ángel L. Villanueva-Perales Chemical and Environmental
Engineering Department, Escuela T�ecnica Superior de Inge-
niería, Universidad de Sevilla, Camino de los Descubri-
mientos, Seville, Spain
Irene Voukkali Laboratory of Chemical Engineering and
Engineering Sustainability, Faculty of Pure and Applied
Sciences, Open University of Cyprus, Nicosia, Cyprus
Wen-luan Xie National Engineering Research Center of New
Energy Power Generation, Beijing, P.R. China
Ibrahim Yildiz Department of Mechanical Engineering, Grad-
uate Education Institute, Usak University, Usak, Turkey
Antonis A. Zorpas Laboratory of Chemical Engineering and
Engineering Sustainability, Faculty of Pure and Applied
Sciences, Open University of Cyprus, Nicosia, Cyprus
	Contributors