ASM Metals HandBook Volume 12 - Fractography
DisciplinaMetalurgia Mecânica154 materiais • 1.992 seguidores
p 969 51. G. Henry and J. Plateau, La Microfractographie, Institute de Recherches de la Sidérurgie Francaise ; see translation by B. Thomas with Preface by C. Crussard, Éditions Métaux  52. C.F. Tipper and A.M Sullivan, Fracturing of Silicon-Ferrite Crystals, Trans. ASM, Vol 43,1951, p 906- 928; discussion, p 929-934 53. E.P. Klier, A Study of Cleavage Surfaces in Ferrite, Trans. ASM, Vol 43, 1951, p 1935-953; discussion p 953-957 54. The Transmission Electron and Microscope and Its Application to Fractography, in Fractography and Atlas of Fractographs, Vol 9, 8th ed., Metals Handbook, American Society of Metals, 1974, p 54-63 55. V.K. Zworykin and J. Hillier, Microscopy: Electron, Medical Physics, Vol II, 1950, p 511-529 56. J. Hiller, Electron Microscope, in Encyclopedia Britannica, 1960 57. V.E. Cosslett, Practical Electron Microscopy, Academic Press, 1951, p 41-46 58. H. Busch, Calculation of Trajectory of Cathode Rays in Electromagnetic Fields of Axial Symmetry, Ann. d. Physik, Vol 81, 1926, p 59. E. Ruska and M. Knoll, The Electron Microscope, Ztschr. f. Physik, Vol 78, 1932, p 318 60. E. Ruska, Advance in Building and Performing of Magnetic Electron Microscope, Ztschr. f. Physik, Vol, 87, 1934, p 580 61. E. Driest and H.O. Müller, Electron Micrographs of Chitin Substances, Ztschr. f. wissensch. Mikr., Vol 52, 1935, p 53 62. B. von Borries and E. Ruska, Development and Present Efficiency of the Electron Microscope, Wissensch. Veröfent. Siemens-Werke, Vol 17, 1938, p 99 63. A. Prebus and J. Hillier, Construction of Magnetic Electron Microscope of High Resolving Power, Can. J. Res., Vol A17, 1939, p 49 64. A.D. Romig, Jr. et al., Analytical Transmission Electron Microscopy, in Materials Characterization, Vol 10, 9th ed., Metals Handbook, American Society for Metals, 1986, p 429-489 65. L. Robert. J. Bussot, and J. Buzon, First International Congress for Electron Microscopy, Rev. d' Optique, 1953, p 528 66. D.E. Bradley, Br. J. Appl. Phys., Vol 5, 1954, p 96 67. E. Smith and J. Nutting, Br, J. Appl. Phys., Vol 7, 1956, p 214 68. A. Phillips, V. Kerlins, R.A. Rawe and B.V. Whiteson, Ed., Electron Fractography Handbook, sponsored by Air Force Materials Laboratory, Air Force Wright Aeronautical Laboratories, Air Force Systems Command, published by Metals and Ceramics Information Center, Battelle Columbus Laboratories, March 1968 (limited quantities), June 1976 (unlimited distribution) 69. C. Crussard, R. Borione, J. Plateau, Y. Morillon, and F. Maratray, A Study of Impact Test and the Mechanism of Brittle Fracture, J. Iron Steel Inst., Vol 183, June 1956, p 146 70. C. Crussard and R. Tamhankar, High Temperature Deformation of Steels: A Study of Equicohesion, Activation Energies and Structural Modifications, Trans. AIME, Vol 212, 1958, p 718 71. C. Crussard, J. Plateau, R. Tamhankar, and D. Lajeunesse, A Comparison of Ductile and Fatigue Fractures, (Swampscott Conference, 1959), John Wiley & Sons, 1959 72. J. Plateau, G. Henry, and C. Crussard, Quelque Nouvelles Applications de la Microfractographie, Rev. Metall., Vol 54 (No. 3), 1957 73. C.D. Beachem, "Characterizing Fractures by Electron Fractography, Part IV, The Slow Growth and Rapid Propagation of a Crack Through a Notched Type 410 Stainless Steel Wire Specimen," NRL Memorandum Report 1297, Naval Research Laboratory, April 1962 74. C.D. Beachem, "Gases in Steel (Electron Fractograhic Examination of Ductile Rupture Tearing in a Notched Wire Specimen)," NRL Problem Report, Naval Research Laboratory, Aug 1962 75. C.D. Beachem, "An Electron Fractographic Study of the Mechanism of Ductile Rupture in Metals," NRL Report 5871, Naval Research Laboratory, 31 Dec 1962 76. C.D. Beachem, "Effect of Test Temperature Upon the Topography of Fracture Surfaces of AMS 6434 Sheet Steel Specimens," NRL Memorandum Report 1293, Naval Research Laboratory, March 1962 77. C.D. Beachem, "Characterizing Fractures by Electron Fractography, Part V, Several Fracture Modes and Failure Conditions in Four Steel Specimens," NRL Memorandum Report 1352, Naval Research Laboratory, Aug 1962 78. C.D. Beachem, Electron Fractographic studies of Mechanical Fracture Processes in Metals, J. Basic Eng. (Trans. ASME), 1964 79. C.D. Beachem and D.A. Meyn, "Illustrated Glossary of Fractographic Terms," NRL Memorandum Report 1547, Naval Research Laboratory, June 1964 80. C.D. Beachem, B.F. Brown, and A.J. Edwards, "Characterizing Fractures by Electron Fractography, Part XII, Illustrated Glossary, Section 1, Quasi-Cleavage," NRL Memorandum Report 1432, Naval Research Laboratory, June 1963 81. C.D. Beachem, An Electron Fractographic Study of the Influence of Plastic Strain Conditions Upon Ductile Rupture Processes in Metals, Trans. ASM, Vol 56 (No. 3), Sept 1963, p 318 82. C.D. Beachem, "The Interpretation of Electron Microscope Fractographs," NRL Report 6360, Naval Research Laboratory, 21 Jan 1966 83. C.D. Beachem, Electron Fractographic Studies of Mechanical Processes in Metals, Trans. ASME, Series D, Vol 87, 1965 84. C.D. Beachem and D.A Meyn, "Fracture by Microscope Plastic Deformation Process," Paper 41, presented at the Seventieth Annual Meeting of ASTM, Boston, MA, American Society for Testing and Materials, 25-30 June 1967 85. C.D. Beachem, "The Formation of Cleavage Tongues in Iron," NRL Report, Naval Research Laboratory, Feb 1966 86. C.D. Beachem, "The Interpretation of Electron Microscope Fractographs," NRL Report No. 6360, Naval Research Laboratory, 21 Jan 1966 87. C.D. Beachem, Microscopic Fatigue Fracture Surface Features in 2024-T3 Aluminum and the Influence of Crack Propagation Angle Upon Their Formation, Trans. ASM, Vol 60, 1967, p, 324 88. C.D. Beachem, "The Origin of Tire Tracks," NRL Progress Report, Naval Research Laboratory, May 1966 89. C.D. Beachem, "The Usefulness of Fractography," Paper 46, presented at the Seventieth Annual Meeting of ASTM, Boston, MA, American Society for Testing and Materials, 25-30 June, 1967 90. C.D. Beachem, "The Crystallographic of Herringbone Fractures in an Iron-Chromium-Aluminum Alloy," NRL Report, Naval Research Laboratory, Jan 1967 91. C.D. Beachem and R.M.N. Pelloux, Electron Fractography--A Tool for the Study of Micromechanisms of Fracturing Processes, in Fracture Toughness Testing and Its Applications, STP 381, American Society for Testing and Materials, 1964 p 210-245 92. R.M.N. Pelloux, "Influence of Constituent Particles on Fatigue Crack Propagation in Aluminum Alloys," DI-82-0297, Boeing Scientific Research Laboratories, Sept 1963 93. R.M.N. Pelloux, "The Analysis of Fracture Surfaces by Electron Microscopy," DI-82-0169-RI, Boeing Scientific Research Laboratories, Dec 1963 94. R.M.N. Pelloux and J.C. McMillan, The Analysis of Fracture Surfaces by Electron Microscopy, in Proceeding of the First International Conference of Fracture, Vol 2, Japanese Society for Strength and Fracture of Materials, 1966 95. R.M.N. Pelloux, The Analysis of Fracture Surfaces by Electron Microscopy, Met., Eng. Quart., Nov 1965, p 26-37 96. O.C. Wells, A. Boyde, E. Lifshin, and A. Rezanowich, Scanning Electron Microscopy, McGraw-Hill, 1974 97. M. Knoll, Static Potential and Secondary Emission of Bodies Under Electron Irradiation, Z. Tech. Phys., Vol 11, 1935, p 467-475 (in German) 98. M. von Ardenne, The Scanning Electron Microscope: Practical Construction, Z. Tech. Phys., Vol 19, 1938, p 407-416 (in German) 99. M. von Ardenne, The Scanning Electron Microscope: Theoretical Fundamentals, Z. Tech. Phys., Vol 109, 1938, p 553-572 100. V.K. Zworykin, J. Hillier, and R.L. Snyder, A Scanning Electron Microscope, ASTM Bull., No. 117, 1942, p 14-23 101. C. Brachet, Note on the Resolution of the Scanning Electron Microscope, Bull. L'Assoc. Tech. Mar.