11 pág.


DisciplinaLingotamento Contínuo de Aços30 materiais72 seguidores
Pré-visualização5 páginas
fluid density
volume fraction than a BT or a tundish using two pairs st turbulent Schmidt number
of dams and a waved impact pad. s« constant in the k-« model
2. The combination of a TI and a pair of dams yields very
similar RTD curves for the four strands of this tundish.
REFERENCESAside, in principle, from the thermal effects, this would
lead to a homogeneous steel cleanliness and output tem- 1. A. McLean, L.J. Heaslip, and I.D. Sommerville: Continuous Casting,
peratures in the four strands in the prototype tundish. ISS, Warrendale, PA, 1983, vol. 1, pp. 67-84.
2. S. Tanaka, M. Lye, M. Salcudean, and R.I.L. Guthrie: 24th Ann. Conf.3. A turbulence inhibitor, combined with a pair of dams,
of Metallurgists, CIM, Montreal, 1985, pp. 142-61.decreases considerably transverse and axial mixing of
3. Y. Sahai and R. Ahuja: Ironmaking and Steelmaking, 1986, vol. 13,the fluid, yielding lower values of back mixing flow as pp. 241-47.
compared with a BT and a tundish with two pairs of 4. C.S. Damle and Y. Sahai: Iron Steel Inst. Jpn. Int., 1995, vol. 35, (5)
pp. 163-69.dams and a waved impact pad.
5. J.J. Chen: Proc. Steelmaking Conf., 1995, vol. 78, pp. 593-98. Iron Steel Inst. Jpn. Int., 1999, vol. 5 (5), pp. 455-62.
17. S. Lo´pez-Ram\u131´rez, R.D. Morales, and J.A. Romero-Serrano: Num.6. Y. Sahai and T. Emi: Iron Steel Inst. Jpn. Int. 1996, vol. 36 (9), pp.
1166-73. Heat Transfer, Part A, 2000 vol. 37 (1), pp. 68-86.
18. P. Rasmussen: Proc. Steelmaking Conf., 1994, vol. 77, pp. 219-24.7. A.K. Sinha and Vassilicos: Ironmaking and Steelmaking, 1998, vol.
25 (5), pp. 387-92. 19. D. Bolger and K. Saylor: Proc. Steelmaking Conf., 1994, vol. 77, pp.
225-33.8. L.J. Heaslip and J. Schade: Iron Steelmaker, 1999, vol. 26 (1), pp.
33-41. 20. R.D. Morales, J. Palafox-Ramos, S. Lo´pez-Ram\u131´rez, M.A. Dominguez-
Crespo, C. Rinco´n, D. Salazar, and A. Dainton: Proc. Steelmaking9. J. Knoepke and J. Mastervich: Proc. Steelmaking Conf., 1986, vol.
69, pp. 777-88. Conf., 1998, vol. 81, pp. 325-33.
21. Y. Sahai and T. Emi: Iron Steel Inst. Jpn. Int., 1996, vol. 36 (6), pp.10. M.L. Lowry and Y. Sahai: Proc. Steelmaking Conf., 1989, vol. 72,
pp. 71-79. 667-73.
22. D. Mazumdar and R.I.L. Guthrie: Iron Steel Inst. Jpn. Int., 1999, vol.11. K.M. Godiwala, S.K. Sinha, and C.S. Sivaramkrishnan: Proc.
Steelmaking Conf., 1994, vol. 77, pp. 703-11. 39 (6), pp. 524-47.
23. D. B. Spalding: Int. J. Num. Math. Eng., 1972, No. 4, pp. 551-61.12. M.L. Lowry and Y. Sahai: Iron Steelmaker, 1992, vol. 19 (3), pp. 81-86.
13. S. Joo, J.W. Han, and R.I.L. Guthrie: Metall. Trans. B., 1993, vol. 24. B.E. Launder and D.B. Spalding: Mathematical Models of Turbulence,
Academic Press, New York, NY, 1972.24B, pp. 779-88.
14. D. Mazumdar, G. Yamanoglu, and R.I.L. Guthrie: Steel Res., 1997, 25. W. Shyy, S.S. Thakur, H. Ouyang, J. Liu, and E. Blosh: Computational
Techniques for Complex Transport Phenomena, Cambridge Universityvol. 68, pp. 293-99
15. S. Lo´pez-Ram\u131´rez, J. Palafox-Ramos, R.D. Morales, M.A. Barro´n- Press Network, Cambridge, United Kingdom, 1997.
26. R.I. Issa: J. Comput. Phys., 1985, vol. 62, pp. 40-65.Meza, and M. Vela´zquez Toledo: Steel Res., 1998, vol. 69 (10\u201311),
pp. 423-28. 27. R.I. Issa, A. Brefrui, K.R. Beshay, and A.D. Gosman: J. Comput.
Phys., 1991, vol. 93, pp. 388-410.16. R.D. Morales, S. Lo´pez-Ram\u131´rez, J. Palafox-Ramos, and D. Zacharias: