Text Material Preview
1 / 4 Pass DELL EMC D-PDC-DY-23 Examwith Real Questions DELL EMC D-PDC-DY-23 Exam Dell PowerSwitch Data Center Deploy 2023 https://www.passquestion.com/D-PDC-DY-23.html 35% OFF on All, Including D-PDC-DY-23 Questions and Answers Pass DELL EMC D-PDC-DY-23 Examwith PassQuestion D-PDC-DY-23 questions and answers in the first attempt. https://www.passquestion.com/ https://www.passquestion.com/ 2 / 4 1.Refer to the exhibit. Which configuration will allow S1 to ping S2’s Lo0 address? A. S1(config-router)# ip route 144.254.32.1 192.168.32.2/32 B. S1(config-router)# ip route 192.168.32.2 144.254.32.1/32 C. S1(config)# ip route 144.254.32.1/32 192.168.32.2 D. S1(config)# ip route 192.168.32.2 144.254.32.1/32 Answer: C 2.When installing OS10 on a switch from a USB drive, what format is used for the file system? A. HFS+ B. FAT32 C. NTFS D. HFS Answer: B 3.What do bridge protocol data units provide? A. Special data frames to exchange STP information B. Metadata transferred connecting two network bridges C. Configuration data exchanged during a VLTi setup D. Bridge information part of the LLDP protocol Answer: A 4.A network administrator has to configure a virtual IP address using VRRP on interface VLAN 100 within OS10. What are the correct steps to accomplish this? A. OS10(config)# interface vlan 100 OS10(conf-if-vl-100)# ip address 10.0.100.2/24 OS10(conf-if-vl-100)# vrrp-group 256 OS10(conf-vlan100-vrid-256)# virtual-address 10.0.100.1 B. OS10(config)# interface vlan 100 OS10(conf-if-vl-100)# ip address 10.0.100.2/24 OS10(conf-if-vl-100)# standby-group 250 3 / 4 OS10(conf-vlan100-vrid-250)# virtual-address 10.0.100.1 C. OS10(config)# interface vlan 100 OS10(conf-if-vl-100)# ip address 10.0.100.1/24 OS10(conf-if-vl-100)# vrrp-group 250 OS10(conf-vlan100-vrid-250)# virtual-address 10.0.100.2 D. OS10(config)# interface vlan 100 OS10(conf-if-vl-100)# ip address 10.0.100.1/24 OS10(conf-if-vl-100)# standby-group 256 OS10(conf-vlan100-vrid-256)# standby-address 10.0.100.2 Answer: C 5.What are mandatory LLDPDU TLV's? A. 0123 B. 0124 C. 0456 D. 1234 Answer: A 6.What is the function of UFD? A. Detects the loss of downstream activity. B. Load balances upstream activity. C. Prevents the loss of upstream activity. D. Detects the loss of upstream activity. Answer: D 7.Using the MAC 8c-ec-4b-5b-61-9d, what is a valid EUI-64 link local address? A. 2001::a9:8eec:4bff:fc5b:619d B. fe80::a9:8cec:4bff:fe5b:619d C. ff80:a9:8eec:4bff:fe5b:619d D. fe80::a9:8eec:4bff:fe5b:619d Answer: D 8.In a PIM Sparse Mode (PIM-SM) based multicast topology, what function does the Rendezvous Point provide? A. The node is used to provide IGMP snooping across a layer 3 boundary. B. The root node of the source tree topology is used to provide routing between the source and receiver. C. The root node of the shared tree topology is used to provide routing between the source and receiver. D. The node is used to provide IGMP snooping on a layer 2 shared segment. Answer: C 9.What does the command aaa authentication login default group radius local do? A. First, a RADUIS server authenticates the users. If the credentials are incorrect, the local router database is used. B. First, a RADUIS server authenticates the users. 4 / 4 If the server fails to respond, a remote router database is used. C. First, a RADIUS server authenticates the users. If the server fails to respond, the local router database is used. D. First, the router local database authenticates the users. If it fails to respond, a RADUIS server authenticates the users. Answer: C 10.What is the default PIM-SSM IP range? A. 224.0.0.0/4 B. 224.0.0.0/24 C. 232.0.0.0/8 D. 232.0.0.0/4 Answer: C 11.A network administrator wants to limit the amount of bandwidth that video traffic can consume. Which type of policy map should be used? A. Queuing B. It is not possible to limit bandwidth using policy maps C. Control plane D. Application Answer: A 12.How are ACLs processed? A. LIFO B. FIFO C. Randomly D. Sequentially Answer: D 13.What is a benefit of multicast over unicast and broadcast communication A. Latency is mitigated B. Bandwidth equally distributed to all devices C. Minimum network bandwidth use D. Increase of the network load Answer: C 14.What must be done before configuring any routing protocol in a VRF instance? A. Assign an IP address to at least one of the interfaces assigned to the VRF instance B. Create a routing group for each VRF instance C. Assign each VRF instance to a routing group D. Nothing, VRF routing protocols are assigned automatically Answer: A Pass DELL EMC D-PDC-DY-23 Exam with Real Questions DELL EMC D-PDC-DY-23 Exam Dell PowerSwitch Data Center Deploy 2023 https://www.passquestion.com/D-PDC-DY-23.html Pass DELL EMC D-PDC-DY-23 Exam with PassQuestion D https
