Dell Data Protection D-NWR-DY-23 Exam Real Dumps

Text Material Preview

D-NWR-DY-23
Exam Name: Dell NetWorker Deploy 2023
Full version: 712 Q&As
Full version of D-NWR-DY-23 Dumps
Share some D-NWR-DY-23 exam dumps
below.
1. What is a requirement for performing a synthetic full backup?
A. A full backup must be run after every 28 incremental operations
B. A full backup or a synthetic full backup must exist
C. Synthetic full backups must be directed to Data Domain devices
 1 / 30
https://www.certqueen.com/D-NWR-DY-23.html
D. All devices used in synthetic full operations must be the same device type
Answer: B
2. Which Dell EMC NetWorker process requests licenses from the CLP/ELMS license server?
A. nsrd
B. nsrlic
C. nsrlmc
D. nsrlcpd
Answer: C
3. Client A performs backups to Storage Node S where the backup operations are managed by
EMC NetWorker Server N. NetWorker Management Console is running on Server Y. Client A's
configuration information was lost.
To which component must the client configuration data be restored?
A. Storage node
B. NetWorker Management Console server
C. Client
D. NetWorker server
Answer: D
4. What is a characteristic of NMDA for MySQL backups?
A. Scheduled and manual backups can be run using the NetWorker User for MySQL interface
B. NMDA cannot delete the binary logs from the disk after completing a binary log backup
C. NMDA interacts with the MySQL Enterprise Backup software through the MySQL SBT
interface
D. MySQL data and binary logs can be sent to separate backup pools during a single NMDA
backup
Answer: D
5. An Microsoft Exchange server administrator wants to receive a daily e-mail about the backup
status of the Exchange server.
Where in the EMC NetWorker Configuration tab can this notification be set?
A. Client Properties
B. Notifications
C. Security Audit Log
D. Registrations
 2 / 30
Answer: A
6. A Dell EMC NetWorker server has been configured to stage from an AFTD upon reaching a
high water mark of 80%.
After the staging begins, which rule determines when the staging process ends?
A. All save sets over a specified size are moved.
B. All save sets older that the "max storage period" are moved.
C. Capacity used falls to any point below the high water mark.
D. File system utilization reaches the low water mark.
Answer: B
7. Which URL should be used to launch the NetWorker Management Console in a web
browser?
A. https://:9090/nwui
B. https://:9090
C. https://:9000
D. https://:9002/nwui
Answer: C
8. All save sets are cloned.
9. What are the requirements to access the NMC UI?
A. Windows-based OS and a Microsoft Visual Studio runtime
B. supported web browser and Java Runtime Environment
C. Java Runtime Environment and Windows-based OS
D. Linux-based OS and supported web browser
Answer: B
10. An EMC NetWorker backup environment consists of a large database server to be backed
up. Backups are performed nightly.
Which schedule would you use starting on Sunday to minimize the number of save sets
required for recovery on Friday morning?
A)
 3 / 30
B)
C)
D)
A. Exhibit A
B. Exhibit B
C. Exhibit C
D. Exhibit D
Answer: A
11. What is a characteristic of a Dell EMC Networker module backup?
A. API determines what is included in the backup save streams
B. Module-specific Networker backup command runs on the Networker server
C. Backup data always goes through the storage node to the storagedevice
D. Block based backups are used for all database backups with Networker
Answer: C
12. Take snapshot
13. All save sets are cloned.
14. Which tool is available to help determine and track source capacity usage in an EMC
NetWorker environment?
A. EMC AMP Utility
B. EMC NetWorker License Manager
C. nsradmin
D. nsrlic
 4 / 30
Answer: A
15. An administrator is performing a directed recover to a Microsoft Windows cluster
environment.
What is the role of the client that initiated the recovery?
A. Destination client
B. Administering client
C. NMC client
D. Source client
Answer: D
16. What is a characteristic of a Dell EMC NetWorker data protection policy?
A. Group of workflows
B. Data source to protect
C. Data protection operation
D. Actions that can be performed
Answer: A
17. A customer asked an administrator to configure Active Directory (AD) granular level backups
A backup administrator discovered that the AD Domain distinguished name is
CN=company,CN=local
What should be entered in the Save Sets attribute for the Domain Controller client to back up
the Active Directory?
A. APPLICATIONS/AD/CN=company,CN=local
B. CN=companyCN=local
C. AD:CN=company.CN=local
D. AD:
Answer: A
18. What must be configured to avoid overloading the NetWorker server in a datazone?
A. server parallelism
B. action parallelism
C. pool parallelism
D. client parallelism
Answer: A
 5 / 30
19. Which EMC NetWorker command lists save sets stored on each volume?
A. mminfo
B. nsrinfo
C. nsrmm
D. nsrretrieve
Answer: A
20. What is a characteristic of configuring an EMC NetWorker probe-based backup?
A. Probe script's name must start with "nsr" or "save"
B. Probe script must be created on the NetWorker server
C. Probe script must return an Exit Code of 1 for the backup to run
D. Only one probe can be run with a group
Answer: A
21. You have been asked to implement a EMC Networker backup solution with the following
requirements:
(1) Leverage Microsoft SQL VDI (Virtual Device Interface) backup API.
(2) Be able to back up SQL database, transaction logs and filegroups.
What is a recommended EMC Networker add-on module?
A. EMC Networker Module for Microsoft SQL Server.
B. EMC Networker Module for Microsoft Applications.
C. EMC Networker Module for Databases and Applications.
D. EMC Networker PowerSnap Module.
Answer: A
22. An administrator wants to use block-based backups on a Windows client. They have already
installed the NetWorker client software package on the system
Which statement describes the need for an additional NetWorker package to enable Block-
based Backup support?
A. NetWorker Block-based Backup software is required.
B. Logical Volume Manager is required.
C. No additional software is required.
D. NetWorker Extended Client software is required.
Answer: A
23. One or more of which process is started, per configured device, to support the reading and
 6 / 30
writing of data?
A. nsrmmdb
B. nsrd
C. nsrsnmd
D. nsrmmd
Answer: D
24. A backup administrator is configuring a clustered Dell EMC NetWorker storage node.
How are the devices within the cluster configured?
A. Local
B. Passive
C. Virtual
D. Remote
Answer: D
25. You need to back up the following Microsoft Windows components:
- All critical volumes
- Windows roles and features
- System reserved partition
- UEFI partition (if available)
Which Dell EMC NetWorker save set should be used?
A. ALL LOCAL DRIVES
B. C:\
C. DISASTER_RECOVERY:\
D. ALL-DFSR
Answer: C
26. What allows Dell EMC NetWorker with CloudBoost to extend on-premises data protection to
the cloud?
A. Backups to the cloud only after first cloning data to a staging server
B. Direct backups to the cloud with the NetWorker Linux and Windows clients
C. DD Boost library for data deduplication before transferring data to the cloud
D. Amazon EC2 and Amazon S3 to enable backups to the cloud
Answer: D
27. A company has a Dell EMC NetWorker client that is running a non-standard database. The
 7 / 30
database REDO log files are currently backed up once a day with a traditional backup.
The database administrator has a new requirement to back up the REDO logs four times a day.
Where is this configured?
A. Protection group
B. Schedule
C. Backup action
D. Workflow
Answer: D
28. Your customer needs to back up a Windows file server containing millions of small files to
their EMC Disk Library using EMC NetWorker.They have a very limited backup window for this
client and need to limit the impact on the server.
What is the best way to fulfill the customer’s requirements?
A. Implement SnapImage.
B. Increase client parallelism.
C. Enable client-side compression.
D. Utilize NetWorker’s cloning and staging capabilities.
Answer: A
29. A Dell EMC Networker backup administrator wants to identify bottlenecks for a file server
with poor backup performance. The administrator discovers that Client Direct is disabled for the
file server.
What happens when Client Direct is enabled?
A. Backup data is sent directly to the target device and metadata is sent to the storage node.
B. Backup data is sent directly to the target device and metadata is sent to the NetWorker
server.
C. Backup data is sent to the storage node and metadata is sent to the NetWorker server.
D. Back up data and metadata are sent to the storage node and then to the target device.
Answer: A
30. An EMC NetWorker customer wants to relocate the Client File Index (CFI) for a client.
Which NetWorker resource must be updated with the new CFI location?
A. Client
B. Library
C. Server
D. Storage node
 8 / 30
Answer: A
31. Which EMC NetWorker process coordinates all scheduled backups?
A. nsrjobd
B. nsrd
C. nsrindexd
D. nsrmmdbd
Answer: A
32. Which type of backup is performed when the EMC NetWorker logs display "Successfully
established DFA session"?
A. Directive-based
B. Differential
C. Incremental
D. Client Direct
Answer: D
33. What is the default port number for the Dell EMC NetWorker server to authenticate the NMC
server host?
A. 7937
B. 7938
C. 9000
D. 9090
Answer: D
34. Which deduplication solution is supported within a NetWorker environment?
A. PowerProtect
B. PowerScale
C. PowerStore
D. Avamar
Answer: D
35. Which are NetWorker modules?
A. NMSQL and NMSAP
B. NMM and NDMP
C. NMDA and NMMEDI
 9 / 30
D. NMC and NSM
Answer: C
36. How can an EMC NetWorker administrator achieve a recovery of an EMC NetWorker
resource database?
A. Perform a browsable recovery of the /nsr/index directory
B. Rebuild the database with nsrck command
C. Recover the SYSTEM save set
D. Recover the bootstrap save set with mmrecov
Answer: D
37. A Dell EMC NetWorker administrator wants to use CloudBoost appliances to protect clients
both on-premises and in the cloud. The administrator plans to configure CloudBoost site cache.
When is it recommended to use CloudBoost site cache?
A. Backup from within the cloud and replication to the cloud only
B. Backup to the cloud and backup from within the cloud only
C. Backup to the cloud, backup from within the cloud, and replication to the cloud
D. Backup to the cloud and replication to the cloud only
Answer: C
38. An administrator added several new LDAP user accounts for backup configuration and
monitoring tasks. The LDAP users have been authenticated in NetWorker Management
Console (NMC).
What must be done so that these tasks can be performed on the Dell EMC NetWorker server?
A. Add the user accounts to the ‘Users’ user group on the NMC server
B. Add the user accounts to the ‘External roles’ field of the user groups on the NetWorker
server
C. Add the user accounts to the ‘Users’ field of the Security Administrators group on the
NetWorker server
D. Add the user accounts to the ‘Registrations’ resource on the NMC server
Answer: A
39. EMC NetWorker customer has an autochanger with four LTO-3 tape drives, and one
advanced file type device. All devices are configured on a single EMC NetWorker server.
Two drives are dynamically shared with an EMC NetWorker storage node. One of the shared
drives suffers a mechanical failure and is disabled.
 10 / 30
How many nsrmmd processes are now running on the EMC NetWorker server?
A. 5
B. 3
C. 6
D. 1
Answer: A
40. When adding an EMC NetWorker server's name into the /nsr/res/servers file of a client,
which service must be restarted on the client for the change to take effect?
A. nsrexecd
B. nsrd
C. nsrindexd
D. nsrdb
Answer: A
41. Which daemons are present on an EMC NetWorker storage node to which a tape library is
configured?
A. nsrexecd, nsrsnmd, nsrlcpd, nsrmmd
B. nsrexecd, nsrsnmd, nsrindexd, nsrlcpd
C. nsrjobd, nsrmmd, nsrlcpd, nsrindexd
D. nsrjobd, nsrmmdbd, nsrd, nsrsnmd
Answer: A
42. What is a characteristic of a CloudBoost appliance?
A. Standalone product that can back up to the cloud using the CloudBoost plug-in.
B. Managed and configured through the Internet using the Cloud portal interface.
C. Only available as a physical appliance to integrate with a public cloud.
D. Enables Dell EMC storage products to use only public cloud storage solutions.
Answer: C
43. You are logged in to your Windows-based EMC NetWorker server and are attempting to
manually run a server-initiated backup via the command line. You are receiving an error when
attempting the savegrp command.
What is the most likely reason for the error?
A. You do not have system administrator privileges.
B. You cannot manually start server-initiated backups.
 11 / 30
C. You should use the save command instead of savegrp.
D. The savegrp command can be run only from a backup client.
Answer: A
44. In a Dell EMC NetWorker datazone, which command is used to change the existing browse
and retention time of a save set?
A. nsrclientfix
B. mminfo
C. nsrim
D. nsrmm
Answer: D
45. A customer has an Oracle 11g database running on a RAC cluster with ASM. It occupies
approximately 5 TB on a Symmetrix DMX. They have an RTO of four hours. They intend to
implement PowerSnap with EMC NetWorker version 7.6 to back up the BCVs using RMAN
scripts and a proxy host.
What prevents this implementation from being successful?
A. PowerSnap is not supported on Oracle 11g with EMC NetWorker 7.6.
B. BCVs cannot be mounted to a proxy host with a RAC cluster.
C. RTO of four hours cannot be accomplished.
D. ASM does not support proxy hosts.
Answer: D
46. What is the outcome of using the recover -iN command?
A. The recovered file is renamed when a conflict occurs.
B. A recover is simulated, and no data is recovered.
C. The file is not recovered if a conflict occurs.
D. The file overwrites the existing file if it is newer than the existing file.
Answer: A
47. An administrator notes that some tapes are prematurely marked as full.
Which command can be used to fix the issue?
A. mminfo -o notfull
B. nsrmm -o notfull
C. nsrim -o notfull
D. jbconfig -o notfull
 12 / 30
Answer: B
48. Which database applications does EMC NetWorker Module for Databases and Applications
provide backup support?
A. IBM DB2, Informix, Oracle, and MySQL
B. IBM Domino, Sybase, Microsoft Exchange, and Oracle
C. Oracle, Microsoft SQL and Exchange, and Informix
D. IBM DB2, MySQL, Sybase, and Microsoft Exchange
Answer: A
49. What are the Dell EMC NetWorker storage node processes?
A. nsrexecd and nsrmmd
B. nsrexecd and nsrd
C. nsrsnmd and nsrmmd
D. nsrsnmd and nsrd
Answer: C
50. A customer is adding a new jukebox to an EMC NetWorker environment. The jukebox is
connected and powered on. The customer powers on the NetWorker server and verifies the
new library is visible to the OS. The customer brings up the Device Administration window and
verifies the existing jukebox is functioning properly.
However when the customer attempts to configure the new library using the Device
Administration window function "Configure All Libraries", it fails to configure and instructs the
customer that they must use jbconfig to manually configure this library.
What is the most likely reason that the customer is forced to use jbconfig rather than the Device
Administration window?
A. NetWorker is unable to read the device serial numbers
B. The jukebox WWPNs are not zoned into the SAN properly.
C. The /etc/rc3.d/S95networker failedto execute completely.
D. The tape devices in the jukebox are identified as AIT-2 format.
Answer: A
51. A customer needs to perform a Virtual Machine Recovery from a save set located on a Dell
Cloud Tier.
Which additional device type must be available to perform this recovery?
A. PowerProtect DD
 13 / 30
B. PowerProtect Storage Direct
C. AFTD
D. CloudBoost
Answer: A
52. What is a recommendation for a Dell EMC NetWorker server software installation?
A. Use NAS storage to enable higher I/O loads
B. Install the required Java software after installing the server
C. Configure multi-tenancy during installation
D. Store the NetWorker databases on the same partition as the OS
Answer: A
53. A Dell EMC NetWorker administrator is configuring the backup environment to use the
parallel save streams feature. However, the administrator notices that the feature is not being
used for backups of a specific client.
What is a possible cause for this issue?
A. Client parallelism = 4 PSS:streams_per_ss = 4
B. Client parallelism = 8 PSS:streams_per_ss = 4
C. Client parallelism = 8 PSS:streams_per_ss = 12
D. Client parallelism = 12 PSS:streams_per_ss = 4
Answer: D
54. During a scheduled backup, what would EMC NetWorker do if a save set does not explicitly
match any pool?
A. EMC NetWorker sends the save stream to a volume in the Default pool.
B. EMC NetWorker sends the save stream to a volume in the Backup Clone pool.
C. EMC NetWorker aborts the backup.
D. EMC NetWorker aborts the backup and disables the Group.
Answer: A
55. While creating a Microsoft VSS snapshot in an EMC NetWorker environment, what is
performed by a Provider?
A. Creates the snapshot
B. Freezes the read/write activity
C. Writes the backup data to tape
D. Thaws the read/write activity
 14 / 30
Answer: A
56. A customer’s EMC NetWorker data zone has one NetWorker server and four NetWorker
clients with two client resources configured for each client.
How many Client File Indexes are stored on the NetWorker server?
A. 5
B. 4
C. 8
D. 9
Answer: A
57. You are backing up a group of clients that have varying schedules. Using the EMC Net
Worker administrator interface, you need to perform a full backup of all clients in that group.
Using the Net Worker administrator how would you ensure all clients back up full on the next
save group execution?
A. Set a Level full in the group resource under the Advanced tab.
B. Change the group resource Snapshot Pool to Full in the Setup tab.
C. Uncheck the Force incremental option in the group resource Advanced tab.
D. Create a staging resource called full and set the destination pool to full.
Answer: A
58. By default, which NetWorker server policy and workflow back up the CFI?
A. Silver policy and NMC Server backup workflow
B. Server Protection policy and Server backup workflow
C. Server Protection policy and NMC Server backup workflow
D. Gold policy and Server backup workflow
Answer: A
59. You are implementing an EMC NetWorker backup solution for a Microsoft SharePoint 2010
distributed farm. The customer has indicated that a SharePoint granular level recovery is
required.
Which backup solution needs to be implemented?
A. EMC NetWorker Module for Microsoft and a third-party recovery tool
B. EMC NetWorker Module for Microsoft and BR*Tool
C. EMC NetWorker Module for Microsoft and EMC VSS provider only
D. EMC NetWorker Module for Databases and Applications and EMC VSS provider
 15 / 30
Answer: A
60. An EMC NetWorker customer wants to exclude all .jpg files from backups for all Solaris
hosts. Backups are initiated from both the client and server.
How should this be enforced?
A. Client-side directive
B. AES directive
C. NetWorker user local directive
D. Server-side directive
Answer: A
61. Which Dell EMC NetWorker database allows an administrator to browse backup details for a
particular point in time?
A. Jobs database
B. Resource database
C. Media database
D. Client File Index
Answer: D
62. A backup administrator needs to upgrade NVE. To which folder on the NVE appliance must
the upgrade package be copied before starting the upgrade?
A. /home/avamar/repo/packages
B. /upgrade
C. /data01/avamar
D. /data01/avamar/repo/packages
Answer: D
63. For which Microsoft operating system can you use the EMC NetWorker option to turn off
VSS snapshots?
A. Microsoft Windows 2003
B. Microsoft Windows 7
C. Microsoft Windows 2008
D. Microsoft Windows Vista
Answer: A
64. A Dell EMC NetWorker backup administrator configured Microsoft Exchange DAG federated
 16 / 30
backups using NMM with block based backups (BBB). However, the backup failed when
attempting to write to AFTDs.
What is the possible reason for the backup failure?
A. Federated backups are not supported with BBB
B. nsrnmmsv backup command was used
C. Client Direct is not enabled
D. AFTD is not supported with BBB
Answer: C
65. A client save set is backed up to an EMC NetWorker backup pool and later cloned to a
volume in a clone pool.
Which parameter determines when the volume in the clone pool is a candidate for recycling?
A. Longest retention time of any save set on the clone volume
B. Longest retention time of any differential save set on the clone volume
C. Longest retention time of any full save set on the clone volume
D. Longest retention time of any incremental save set on the clone volume
Answer: A
66. What are supported private cloud storage providers for CloudBoost?
A. EMC Atmos and Generic OpenStack Swift
B. Amazon Web Services and Microsoft Azure Storage
C. Amazon Web Services and AT&T Synaptic Storage
D. Google Cloud Storage and Virtustream Storage Cloud
Answer: A
67. Which EMC NetWorker daemon provides client files system information?
A. nsrfsra
B. nsrexecd
C. nsrlcpd
D. nsrindexd
Answer: A
68. In a UNIX environment, which NetWorker daemon determines the RPC ports to use to
request NetWorker services over the network?
A. nsrsnmd
B. nsrexecd
 17 / 30
C. nsrmmd
D. nsrlcpd
Answer: B
69. Which EMC Net Worker settings control the amount of multiplexing?
A. Group parallelism and max sessions
B. Server parallelism and device target sessions
C. Client parallelism and target sessions
D. Pool parallelism and max sessions
Answer: B
70. A storage administrator backs up an Exchange server to an EMC Data Domain system. The
Data Domain system is configured as an advanced file device. The administrator now wants to
create a copy of the backup and send it to tape.
The backup job completed at 8pm. The administrator wants the copy to be created at 9pm.
Which option should be used?
A. Use the Scheduled Cloning attribute to schedule a clone job to start at 9 pm.
B. Run the nsrclone command at 8 pm and the second copy will be directed to tape at 9 pm.
C. Enable the "clones" attribute in the client's group setting.
D. From the Administration window, under Media select Save Sets and then the Query Save Set
tab. Create clone copies of the backup at 8 pm.
Answer: A
71. Refer to the exhibit.
 18 / 30
How many nsrlcpd processes are running on the EMC NetWorker server?
A. 0
B. 1
C. 2
D. 9
Answer: A
72. A Dell EMC NetWorker backup administrator is using NetWorker Snapshot Management.
Which recovery type describes a traditional restore from a backup storage media?
A. Restore from a clone
B. Snapshot restore
C. Rollback from a clone
D. Rollback restore
Answer: B
73. By default, what is the username for the NMC server database in Dell EMC NetWorker?
A. admin
B. administrator
C. postgres
D. networker
Answer: C
74. An EMC NetWorker administrator configured a Microsoft Exchange client with the
 19 / 30
NetWorker Module for Microsoft (NMM).
In which attribute did the administrator specify the backup options?
A. Application informationB. Backup command
C. Schedule
D. Save set
Answer: A
75. In a UNIX environment, which Dell EMC NetWorker daemon authenticates and supports
remote execution requests from the NetWorker server?
A. authd
B. nsrfsra
C. nsrexecd
D. nsrmmd
Answer: C
76. A Dell EMC Networker Administrator always wants to perform a backup of the cluster virtual
client data to its local storage node device.
How can this be achieved?
A. List all storage nodes as part of the cluster under the "Storage Node" attribute of the virtual
client resource.
B. Ensure the "Storage Node" attribute under the virtual client resource is blank.
C. Use the keyword "curphyhost" under the "Storage Node" attribute of the virtual client
resource.
D. Specify the local storage node for all physical client resources in the cluster.
Answer: C
77. A Dell EMC NetWorker backup administrator has configured Data Domain Cloud Tier for
long-term retention with ECS cloud. After setting up the data movement policy in NetWorker, the
administrator discovers that the save set has not moved to their cloud even after cloning
completed successfully.
What is a possible reason for this issue?
A. Data Domain does not have a replication license for managed-file replication.
B. ECS does not support an app-based policy for cloning using NetWorker.
C. Data movement policy has not yet run on the Data Domain system.
D. Backup administrator does not have admin privileges on the Data Domain system.
 20 / 30
Answer: D
78. A Dell EMC NetWorker backup administrator wants to recover a large number of files from a
backup.
Which type of recovery is recommended for the restore?
A. Snapshot
B. Directed
C. Save Set
D. Browsable
Answer: C
79. A storage administrator has configured a client for snapshot backups using EMC NetWorker
Snapshot Management. The backup completed successfully and the administrator is now ready
to restore the data.
Which type of restore will destroy all existing data onthe target application volume?
A. Rollback
B. Snapshot
C. Restore from rollover
D. Directed
Answer: A
80. To which items do NetWorker directives apply?
A. guest-level backups of virtual machines and block-based backups
B. NAS backups, physical servers, and NetWorker module backups
C. physical servers and guest-level backups of virtual machines
D. block-based backups, snapshots, NAS backups, and NetWorker module backups
Answer: C
81. Which NetWorker command is used to repopulate the client file index and media database
for a specific save set?
A. scanner -m -S ssid device_name
B. scanner -m device_name
C. scanner -i -S ssid device_name
D. scanner -i device_name
Answer: C
 21 / 30
82. Refer to the Exhibit.
What is the size of the EMC NetWorker synthetic full back up on Saturday?
A. 1.5 TB
B. 1.7 TB
C. 2.45 TB
D. 2.55 TB
Answer: A
83. Which technology is used for backup and recovery with NMM?
A. NDMP
B. Parallel Save Streams
C. Virtual Device Interface
D. Changed Block Tracking
Answer: C
84. Freeze application
85. In Dell EMC NetWorker, what is a purpose for the NetWorker save and recover daemon,
nsrd?
A. Manage the NetWorker media database
B. Start other NetWorker server and storage node daemons
C. Coordinate all scheduled backups
D. Provide the read and write service for NetWorker CFI databases
Answer: B
86. A Dell EMC NetWorker solution will be implemented that consists of two NetWorker servers
and a single NetWorker Management Console (NMC). The NMC will be installed on only one of
the NetWorker servers.
To allow management of both servers from the NMC, which command must be executed and on
which NetWorker server?
 22 / 30
A. nsraddadmin; server where NMC is not installed
B. nsraddadmin; server where NMC is installed
C. nsrauthtrust; server where NMC is installed
D. nsrauthtrust; server where NMC is not installed
Answer: D
87. What is the first step that occurs during a client initiated backup?
A. Save program generates one save stream of data
B. Save program connects to nsrmmd
C. Save program initiates a connection to nsrindexd
D. nsr daemon sends information to EMC NetWorker server
Answer: A
88. A backup administrator is looking for recent notifications from workflows and actions in a
policy.
Where can they find this information?
A. policy_notifications.log
B. policy_log.log
C. policy_log.log
D. workflow_notifications.log
Answer: A
89. You have successfully configured three SQL servers for backup with the EMC NetWorker
Module for SQL. These servers are configured as follows: Save set: MSSQL: All three clients
are in the same group Data for this group is sent to the SQL_Bkup pool Scheduled backup of
the group shows that all SQL data from the three servers was successfully backed up.
However, when you attempt to recover the SQL data using the standard NetWorker user GUI,
you only see file system data to recover.
What must you do to recover the SQL data backed up with the NetWorker module?
A. Launch the NetWorker User for SQL.
B. Modify the browse time within the NetWorker user GUI to show the period for which you want
to recover.
C. Use the Microsoft SQL Server native tools to recover the data from NetWorker.
D. Modify the save set to include an instance or database name after MSSQL:.
Answer: A
 23 / 30
90. A backup administrator has installed a new NetWorker server.
What command is used to apply the license key?
A. nsradmin
B. nsrlic
C. nsrstage
D. nsrcap
Answer: A
91. Which interface is used to perform backups when the EMC NetWorker Module for SAP on
Oracle is used?
A. SAP BR*Tools
B. backint
C. RMAN
D. NMDA
Answer: A
92. A Dell EMC NetWorker backup administrator wants to run a clone after backing up their
Microsoft Windows clients.
Which configuration will combine the backup and clone?
A. Policy
B. Protection Group
C. Action
D. Workflow
Answer: A
93. Refer to the exhibit.
 24 / 30
An administrator asks about the clone flag on the Cloud.
What does the T flag represent?
A. Save set exists only on a Cloud Tier device
B. Save set will be cloned to a tape device
C. Save set will be terminated at the cloud provider
D. Save set exists only on the cloud storage
Answer: A
94. Which target devices support Block Based Backup when Client Direct is enabled?
A. CloudBoost, ProtectPoint devices and CloudBoost devices
B. CloudBoost, DD Boost, and ProtectPoint devices
C. DD Boost, CloudBoost, and Dell EMC Cloud Tier devices
D. AFTDs, DD Boost, and CloudBoost devices
Answer: D
95. An EMC NetWorker administrator wants to back up Microsoft Exchange server using EMC
NetWorker Module for Microsoft Applications.
What needs to be specified in the Backup command field?
A. nsrsnap_vss_save
B. nsrxchsv
C. save
D. savefs
Answer: A
 25 / 30
96. During a backup, which EMC NetWorker host is responsible for tracking the number of clone
copies?
A. Storage Node
B. Server
C. Client
D. Console
Answer: A
97. Which privilege must be assigned to a user group to allow its members lo create NetWorker
clients?
A. Monitor NetWorker
B. Operate NetWorker
C. Configure NetWorker
D. Remote Access All Clients
Answer: C
98. Which private cloud providers are supported in NetWorker?
A. Amazon Web Services and Generic OpenStack Swift
B. Elastic Cloud Storage and Generic OpenStack Swift
C. Google Cloud Storage and Microsoft Azure
D. Scality Object Storage and Elastic Cloud Storage
Answer: B
99. An EMC NetWorker administrator on an UNIX terminal wants to monitor volume mount
requests.
Which NetWorker Administrative interface is recommended?
A. nsrwatch
B. nsradmin
C. NetWorker Management Console
D. Backup and Recovery Manager
Answer: C
100. In a Dell EMC NetWorker datazone, which command should be used to recover the
bootstrap save set?
A. nsrdr
B. scanner26 / 30
C. nsrimport
D. mmrecov
Answer: D
101. An EMC NetWorker server is connected to a Data Domain system with a CIFS share
configured.
Which device type should be configured on NetWorker?
A. AFTD
B. Cloud
C. Data Domain
D. Remote
Answer: A
102. Your customer is running an EMC NetWorker 7.6 server and wants to upgrade their clients
running NetWorker 7.4.
What are two ways to do this remotely from the NetWorker server?
A. Software Administration Wizard and nsrpush
B. Copy with Clients and nsrpush
C. Software Administration Wizard and nsrclient
D. Copy and nsrpush
Answer: A
103. An EMC NetWorker administrator wants to start all NetWorker processes on a Linux
server.
Which command should be run?
A. /etc/init.d/networker start
B. /etc/rc2.d/gst start
C. /sbin/int.d/networker start
D. /sbin/init.d/gst start
Answer: D
104. Which tool must be used to migrate the NMC database when upgrading to NetWorker 9?
A. gstdbconvert
B. nmcmigrate
C. gstdbunload
D. nmcconvert
 27 / 30
Answer: C
105. What is the key performance tuning feature that determines the amount of multiplexing
when writing to a tape device?
A. Block Based Backup
B. Block Based Backup with Parallel Save Stream
C. Parallelism
D. Parallel Save Stream
Answer: C
106. What is a characteristic of using EMC NetWorker Snapshot Management?
A. Leverages storage system-based snapshot technology
B. Must be licensed separately from the capacity licensing model
C. Replaces the NetWorker SnapImage module
D. Requires a separate software installation on the NetWorker client
Answer: A
107. What is a consideration when performing a rollback restore with Dell EMC NetWorker
Snapshot Management?
A. Restoring from tape storage media can potentially take a long time
B. Restore operation destroys all previously existing data on the target disk
C. Restore operation requires that individual files to restore be selected
D. Snapshot must be mounted on a storage node/mount host
Answer: B
108. A Dell EMC administrator needs to backup Informix dbspaces every four days and depend
on a maximum of two backups for the restores.
What is the Informix backup level sequence required to meet this requirement?
A. 0, 1, 1, 0
B. 0, 1, 2, 0
C. 0, Logs only, Logs only, 0
D. Full, Incr, Incr, Full
Answer: D
109. Client_A is a client in an EMC NetWorker environment. There are two EMC NetWorker
servers: Server_A and Server_B. Server_A is local to Client_A while Server_B is located across
 28 / 30
a WAN. In addition, there is one storage node, StorageNode_B, defined on Server_B.
You notice that there are no entries in the /nsr/res/servers file on Client_A.
Which system is allowed to back up data from Client_A?
A. Server_B only
B. Any NetWorker server
C. No systems are allowed to back up Client_A
D. Server_A only
Answer: B
110. What is a characteristic of the Dell EMC Networker Jobs database purge process?
A. Based on workload
B. Based on size
C. Based on time
D. Based on performance
Answer: C
111. Which Dell EMC NetWorker function is used to rollover NSM snapshots to backup media?
A. Staging
B. Backup
C. Cloning
D. Aging
Answer: C
 29 / 30
https://www.certqueen.com/promotion.asp
 
More Hot Exams are available.
350-401 ENCOR Exam Dumps
350-801 CLCOR Exam Dumps
200-301 CCNA Exam Dumps
Powered by TCPDF (www.tcpdf.org)
 30 / 30
https://www.certqueen.com/350-401.html
https://www.certqueen.com/350-801.html
https://www.certqueen.com/200-301.html
http://www.tcpdf.org