H19-301_V3 0 HCSA-Presales-IP Network Certification V3 0 Real Dumps

Text Material Preview

H19-301_V3.0
Real Dumps
https://www.certspots.com/exam/h19-301_v3-0/
Huawei H19-301_V3.0 Real Dumps
1. Which of the following statements is false about the technologies used on an 
IP WAN transport network?
A. FlexE interfaces can be completely isolated from each other. Specifically, 
traffic is isolated at the physical layer, and network slicing is performed for 
services on the same physical network.
B. SRv6 is a protocol designed to forward IPv6 data packets on a network using 
the source routing model. SRv6 deployment depends on MPLS networks.
C. IFIT integrates coloring and in-band flow measurement technologies to 
directly measure service packets. It works with telemetry and NCE to 
implement real-time visualization of network quality and traffic SLA, proactive 
monitoring, as well as fast fault demarcation and locating.
D. MACsec protects transmitted Ethernet data frames to reduce information 
leakage and mitigate malicious network attacks.
Answer: B
Huawei H19-301_V3.0 Real Dumps
2. Which of the following functions is not supported by NetEngine 
routers?
A. Stateful firewall
B. BRAS
C. NetStream
D. Telemetry
Answer: A
Huawei H19-301_V3.0 Real Dumps
3. A customer's equipment room has limited space and their services 
are fixed and do not need to be expanded in the future. As the 
network to be constructed is small, the customer wants to use 
standard networking. Which of the following CloudFabric solutions is 
recommended for this customer?
A. Multi-PoD solution.
B. Multi-Site solution
C. MDC solution
D. CloudFabric Easy solution
Answer: D
Huawei H19-301_V3.0 Real Dumps
4. Which of the following technologies is used to connect one device 
to another two devices through inter-device link aggregation to 
improve link reliability from the card level to the device level and form 
an active-active system?
A. M-LAG
B. CSS
C. iStack
D. VRRP
Answer: A
Huawei H19-301_V3.0 Real Dumps
5. It supports unified management of various security devices, 
including firewalls, IPS devices, and anti-DDoS devices, and allows 
automatic deployment of security services as well as centralized 
management of network-wide security policies. Which of the 
following is it?
A. USG
B. SecoManager
C. eSight 
D. iMaster NCE
Answer: B
Huawei H19-301_V3.0 Real Dumps
6. Which of the following statements is false about telemetry?
A. Telemetry is a technology that remotely collects data from physical or 
virtual devices at a high speed.
B. Huawei CloudCampus Intelligent O&M Solution uses the telemetry 
technology to collect network device KPIs, implementing collection of user 
experience indicators within seconds.
C. Similar to SNMP, telemetry uses the quick Q&A mechanism between the 
management and analysis system and devices, allowing the management and 
analysis system to obtain network data in real time for intelligent analysis.
D. Telemetry packs the data to be sent, improving transmission efficiency.
Answer: C
Huawei H19-301_V3.0 Real Dumps
7. A security zone (zone for short) is a security concept introduced by a device. 
Most security policies are implemented based on security zones. Which of the 
following statements are true about security zones?
A. All interfaces of a firewall are added to the Trust zone by default.
B. Each security zone has a security level, which is also called priority. The 
priority value ranges from 1 to 100. A larger value indicates a higher security 
level
C. The following security zones are preconfigured in the system by default: 
Trust, DMZ, and Untrust.
D. Users can also customize new security zones as required.
Answer: BCD
Huawei H19-301_V3.0 Real Dumps
8. Basic WLAN network architectures include Fat AP and WAC+Fit AP. Which 
of the following statements are true about the two architectures?
A. Fat APs are usually used on large-scale networks to provide coverage in 
high-density communication scenarios. 
B. Although Fat APs work independently, they can detect each other and 
automatically adjust radio parameters. 
C. When an AP works in Fit AP mode, it is managed by a WAC and its 
configuration is also delivered by the WAC. 
D. When APs work in Fat AP mode, they need to be configured separately and 
each AP works independently.
Answer: CD
Huawei H19-301_V3.0 Real Dumps
9. What are the capabilities of iMaster NCE-IP in the network slicing 
solution?
A. SRv6-based one-hop cloud access
B. One-fiber multipurpose transport based on network slicing
C. Integrated security based on in-depth traffic identification
D. Al-based one-click O&M
Answer: ABD
Huawei H19-301_V3.0 Real Dumps
10. Which of the following statements are highlights of SRv6?
A. Application-level SLA assurance
B. Network-oriented programming
C. Seamless cross-domain interconnection
D. MPLS not required, simplifying network deployment
Answer: ABCD