D-NWG-FN-23 Dell Networking Foundations 2023 Exam Dumps Questions

Text Material Preview

<p>D-NWG-FN-23 Dell Networking Foundations 2023 exam dumps questions are</p><p>the best material for you to test all the related DELL EMC exam topics. By using</p><p>the D-NWG-FN-23 exam dumps questions and practicing your skills, you can</p><p>increase your confidence and chances of passing the D-NWG-FN-23 exam.</p><p>Features of Dumpsinfo’s products</p><p>Instant Download</p><p>Free Update in 3 Months</p><p>Money back guarantee</p><p>PDF and Software</p><p>24/7 Customer Support</p><p>Besides, Dumpsinfo also provides unlimited access. You can get all</p><p>Dumpsinfo files at lowest price.</p><p>Dell Networking Foundations 2023 D-NWG-FN-23 exam free dumps</p><p>questions are available below for you to study.</p><p>Full version: D-NWG-FN-23 Exam Dumps Questions</p><p>1.A technician has one stack of three N3024. The technician removes the master unit without</p><p>powering off the stack. This unit is reconfigured with new IP address in the same Layer 2 network.</p><p>Which management issue is the result?</p><p>A. A duplicate MAC address</p><p>B. A duplicate IP address</p><p>C. Lost switch configuration</p><p>D. A switch that flashes red LED</p><p>Answer: C</p><p>2.What is a valid subnet mask?</p><p>A. 0.0.255.255</p><p>B. 255.255.0.128</p><p>1 / 13</p><p>https://www.dumpsinfo.com/unlimited-access/</p><p>https://www.dumpsinfo.com/exam/d-nwg-fn-23</p><p>C. 255.255.255.255</p><p>D. 255.256.255.0</p><p>Answer: C</p><p>3.Two hosts are able to ping each other when directly connected. When the hosts are connected to</p><p>ports Gi1/0/1 and Gi1/0/2 on a Dell EMC Networking N-Series switch, the process fails.</p><p>Based on the graphic, why does the ping fail?</p><p>A. LACP is not enabled on the switch</p><p>B. Ports are configured on different VLANs</p><p>C. Ports are configured on the same VLANs</p><p>D. Spanning Tree is blocking an interface</p><p>Answer: B</p><p>4.Which command is used to create a non-default VRF instance?</p><p>A. ip vrf</p><p>B. ip vrf forwarding new-vrf</p><p>C. ip vrf forwarding vrf-test</p><p>D. interface ethernet 1/1/1</p><p>Answer: A</p><p>5.Which IPv4 address is in the same network as the IP address 182.15.24.40/23 and assignable to a</p><p>host device?</p><p>A. 182.15.23.224</p><p>B. 182.15.25.0</p><p>C. 182.15.25.255</p><p>D. 182.15.26.10</p><p>2 / 13</p><p>https://www.dumpsinfo.com/</p><p>Answer: B</p><p>6.What are the default credentials for the Dell EMC OpenManage Network Manager?</p><p>A. Username = admin | Password = admin</p><p>B. Username = root | Password = root</p><p>C. Username = root | Password = calvin</p><p>D. Username = admin | Password = password</p><p>Answer: A</p><p>7.Which switching technology can help reduce the size of broadcast domains?</p><p>A. LAG</p><p>B. STP</p><p>C. ISL</p><p>D. VLANs</p><p>Answer: D</p><p>8. Which subnet mask provides only two valid IP addresses that can be assigned to hosts?</p><p>A. 255.255.255.248</p><p>B. 255.255.255.254</p><p>C. 255.255.255.252</p><p>D. 255.255.255.256</p><p>Answer: C</p><p>9.What is the aggregated lanes’ maximum speed rating for a QSFP28 transceiver?</p><p>A. 4 Gbps</p><p>B. 40 Gbps</p><p>C. 112 Gbps</p><p>D. 128 Gbps</p><p>Answer: C</p><p>10.Refer to the exhibit.</p><p>3 / 13</p><p>https://www.dumpsinfo.com/</p><p>No static routing has been configured.</p><p>For iBGP loopback-based peering, which statement is correct?</p><p>A. It is not necessary for the routing table on S1 to have an entry for the loopback network of S3.</p><p>B. S1 should have the Loopback network of S3 in its routing table for loopback-based peering.</p><p>C. For iBGP peering, physical interface addresses must be used.</p><p>D. A static route on S1 to 144.254.32.1/32 will eliminate the need for loopback-based peering with S3.</p><p>Answer: B</p><p>11.A technician configures RIP on a new N-Series switch to connect to an existing switch that runs</p><p>RIP. The routing table is not populating even after the network statements are added.</p><p>What is a possible cause of this issue?</p><p>A. The existing switch has not been configured with the command “hostroutesaccept”.</p><p>B. The new switch’s interface is in the wrong subnet to form a RIP relationship.</p><p>C. The “ip helper-address” command has not been configured on the existing switch.</p><p>D. The other switch is not a root bridge and cannot form an RIP relationship.</p><p>Answer: B</p><p>4 / 13</p><p>https://www.dumpsinfo.com/</p><p>12.Which command is used to prevent STP learning on a port that is connected to a server?</p><p>A. #able spanning-tree</p><p>B. #spanning-tree security</p><p>C. #spanning-tree portfast</p><p>D. #spanning-tree off</p><p>Answer: C</p><p>13.On which OSI layers do standard ACL filters operate?</p><p>A. 2 and 3</p><p>B. 2 and 7</p><p>C. 3 and 4</p><p>D. 4 and 7</p><p>Answer: C</p><p>14.What is an advantage of using SmartFabric Services?</p><p>A. Manual configuration and administration</p><p>B. Resource intensive remediation</p><p>C. Automated deployment and management as a single fabric entity</p><p>D. Device level management and troubleshooting</p><p>Answer: C</p><p>15.Which command enables the read-write network monitoring community string?</p><p>A. #snmp-server community public ro</p><p>B. #snmp-server community netmon rw</p><p>C. #snmp-server community private wr</p><p>D. #snmp-server community public read</p><p>Answer: B</p><p>16.What is the dynamically assigned port range in the Transport layer?</p><p>A. 49150 - 65535</p><p>B. 49151 - 65535</p><p>C. 49152 - 65535</p><p>D. 49153 - 65535</p><p>Answer: C</p><p>17.Which operating system does an N-Series switch use?</p><p>A. OS 3</p><p>B. OS 6</p><p>C. OS 9</p><p>D. OS 10</p><p>Answer: B</p><p>18.Which message is sent by a router when TTL expires?</p><p>A. Echo request</p><p>B. Time exceeded</p><p>5 / 13</p><p>https://www.dumpsinfo.com/</p><p>C. Destination unreachable</p><p>D. Echo reply</p><p>Answer: B</p><p>19.A VLAN has been configured to have an IPv6 address and a stateless address autoconfiguration</p><p>for clients.</p><p>Which IPv6 address prefix will the default gateway have on a client?</p><p>A. fd01::/64</p><p>B. fe08::/64</p><p>C. fe80::/64</p><p>D. ff02::/8</p><p>Answer: C</p><p>20.Refer to the exhibit.</p><p>Switch A and Switch B are connected to each other. Both switches use interfaces Gi1/0/1 and</p><p>Gi1/0/2. Switch A has a Spanning Tree priority of 8192 and Switch B has the default priority.</p><p>Which interface becomes the root port?</p><p>A. Switch A Gi1/0/1</p><p>B. Switch A Gi1/0/2</p><p>C. Switch B Gi1/0/1</p><p>D. Switch B Gi1/0/2</p><p>Answer: C</p><p>6 / 13</p><p>https://www.dumpsinfo.com/</p><p>21.Refer to the output from a Dell N-Series switch:</p><p>A technician checks the connectivity to the default gateway from the switch and notices the ping fails.</p><p>At which layer does the problem exist?</p><p>A. Network</p><p>B. Application</p><p>C. Transport</p><p>D. Session</p><p>Answer: A</p><p>22.Which network device functions only at Layer 1 of the OSI model?</p><p>A. Switch</p><p>B. Bridge</p><p>C. Hub</p><p>D. Router</p><p>Answer: C</p><p>23.A cloud administrator is provisioning several user accounts that have administrator rights to assets</p><p>using JSON within an IaaS cloud platform. The administrator is required to configure "alternate”</p><p>settings using the API.</p><p>Given this scenario, which of the following elements would allow the administrator to meet these</p><p>requirements in the JSON file?</p><p>A. Statement</p><p>B. Effect</p><p>C. Resource</p><p>D. Condition</p><p>Answer: A</p><p>24.Refer to the output.</p><p>A technician implements a new N-Series switch and connects it to another N-Series switch with</p><p>OSPF already configured. The OSPF neighbor does not show up after 5 minutes of waiting.</p><p>What is causing the issue?</p><p>A. A different configured routing protocol is preventing the neighbor relationship.</p><p>B. A hello interval mismatch is occurring.</p><p>C. A Layer 2 VPN service is running on the other switch.</p><p>7 / 13</p><p>https://www.dumpsinfo.com/</p><p>D. A virtual link for RIP has been configured on the other switch.</p><p>Answer: B</p><p>25.Which two methods will create a VLAN on N-Series switches? (Choose two.)</p><p>A. console(config)#interface gi1/0/1</p><p>console(config-if-Gi1/0/1)#switchport access vlan 10</p><p>B. console#vlan 11</p><p>C. console(config)#interface gi1/0/1</p><p>console(config-if-Gi1/0/1)# vlan 10</p><p>D. console(config)#vlan 11</p><p>E. console(config)#interface vlan 11</p><p>Answer: AD</p><p>26.What are two commonly deployed PoE powered devices? (Choose two.)</p><p>A. Wireless access point</p><p>B. VoIP phone</p><p>C. A Workstation</p><p>D. Managed Ethernet router</p><p>E. A printer</p><p>Answer: AB</p><p>27.Which three services use UDP for data segment transportation? (Choose three.)</p><p>A. DHCP</p><p>B. TFTP</p><p>C. SMTP</p><p>D. HTTP</p><p>E. RIP</p><p>F. FTP</p><p>Answer: ABE</p><p>28.What is administrative distance value for default static routes?</p><p>A. 0</p><p>B. 1</p><p>C. 10</p><p>D. 20</p><p>Answer: B</p><p>29.What is the correct sequence of steps that occur in the communications</p><p>between the client and</p><p>server to obtain an IP address from a DHCP server?</p><p>8 / 13</p><p>https://www.dumpsinfo.com/</p><p>Answer:</p><p>30.Refer to the exhibit and output.</p><p>9 / 13</p><p>https://www.dumpsinfo.com/</p><p>Which change should be made to meet this requirement?</p><p>10 / 13</p><p>https://www.dumpsinfo.com/</p><p>A. On switch 1 add a static route to 192.168.50.0/24 with a next hop of 192.168.10.1.</p><p>On switch 3 add a static route to 192.168.50.0/24 with a next hop of 192.168.12.254.</p><p>B. On switch 1 add a static route to 192.168.50.0/24 with a next hop of 192.168.12.1.</p><p>C. On switch 3 add a static route to 192.168.50.0/24 with a next hop of 192.168.12.254.</p><p>D. On switch 2 add a static route to 192.168.50.0/24 with a next hop of 192.168.10.254.</p><p>On switch 3 add a static route to 192.168.50.0/24 with a next hop of 192.168.12.254.</p><p>Answer: B</p><p>31.A client must connect a printer located on a public area on an X1000. The client is concerned</p><p>someone will use the printer Ethernet cable to gain unauthorized network access.</p><p>Which configuration will help prevent unauthorized accesses?</p><p>A. Enable Port Security with Classic Lock mode</p><p>B. Enable Protected Port on the port connected to the printer</p><p>C. Enable Port Security with Dynamic Lock mode</p><p>D. Enable DHCP Snooping on the printer VLAN</p><p>Answer: B</p><p>32.If a packet is sent to an IPv6 address and many devices receive the packet, what is this type of</p><p>traffic?</p><p>A. Multicast</p><p>B. Broadcast</p><p>C. Anycast</p><p>D. Unicast</p><p>Answer: A</p><p>33.A Dell N2024 switch receives a frame from a directly connected host. The switch learns that the</p><p>source MAC address is NOT present in the MAC address table. The destination address is present in</p><p>the MAC address table.</p><p>What does the switch do with the frame?</p><p>A. Floods the frame to all ports except for the port the frame originated from to find the source MAC</p><p>address.</p><p>B. Flushes the destination MAC address and updates the MAC address table in the switch.</p><p>C. Discards the frame on all ports and sends an error message back to the host.</p><p>D. Adds the source MAC address and port to the MAC address table and forwards the frame.</p><p>Answer: D</p><p>34.Which Dell EMC Networking M-Series 10 GbE switch model supports a VLT?</p><p>A. MXL</p><p>B. M6220</p><p>C. M6348</p><p>D. M8024-K</p><p>Answer: A</p><p>35.How many discrete LAN networks are shown in the graphic?</p><p>11 / 13</p><p>https://www.dumpsinfo.com/</p><p>A. 2</p><p>B. 4</p><p>C. 6</p><p>D. 9</p><p>Answer: B</p><p>36.What accurately describes stacking of Dell EMC Networking S4800 Series switches?</p><p>A. Data ports are used for stacking.</p><p>Ports are associated with specific pre-defined stack groups.</p><p>B. Ports not used for stacking in a stack group can still be used as data ports.</p><p>C. Dedicated modules and cabling can be used as an alternative to stacking using data ports.</p><p>D. 1G and 10G ports can be used for stacking.</p><p>40G ports are only reserved for uplinks.</p><p>Answer: A</p><p>37.Which Dell EMC Networking operating system does an N-Series switch use?</p><p>A. OS 3</p><p>B. OS 6</p><p>C. OS 9</p><p>D. OS 10</p><p>Answer: B</p><p>38.Which is the slowest standard that a CAT6 cable supports?</p><p>A. 100BASE-FX</p><p>B. 10GBASE-T</p><p>C. 10BASE5</p><p>D. 1000BASE-T</p><p>Answer: D</p><p>12 / 13</p><p>https://www.dumpsinfo.com/</p><p>39.A technician is applying a switch configuration to an N-Series switch to provide Internet access to</p><p>all connected subnets. The technician has connected a computer and assigned it an IP address,</p><p>subnet mask, DNS, and gateway address. The technician is unable to browse the Internet from that</p><p>computer.</p><p>What is causing the issue?</p><p>A. DHCP Snooping has blocked the host.</p><p>B. The static routes in the configuration file are incorrect.</p><p>C. The “ip helper-address” command is configured on the switch.</p><p>D. Spanning Tree blocked the port going to the PC.</p><p>Answer: B</p><p>40.What is required for a LAG to be configured?</p><p>A. Flow control must be enabled on the port channel interface.</p><p>B. Interface numbers must match between devices.</p><p>C. The member ports must have default parameters.</p><p>D. The interfaces must have different speeds.</p><p>Answer: C</p><p>41.Which of the following is the starting prefix to denote a link local address?</p><p>A. ff0x::</p><p>B. 2001::</p><p>C. fe80::</p><p>D. fc00::</p><p>Answer: C</p><p>42.A network administrator is designing a Layer 2 topology and requires separate spanning-tree roots</p><p>to avoid having a given port blocked for all instances.</p><p>Which spanning-tree protocols will meet this need?</p><p>A. STP & RSTP</p><p>B. RSTP-PV & MSTP</p><p>C. STP & RSTP-PV</p><p>D. RSTP & MSTP</p><p>Answer: B</p><p>43.On Switch A, a static route has been redistributed into OSPF.</p><p>Which type of OSPF router will this process make Switch A?</p><p>A. Autonomous System Boundary Router (ASBR)</p><p>B. Designated router (DR)</p><p>C. Area Border Router (ABR)</p><p>D. Backbone Router (BR)</p><p>Answer: A</p><p>Powered by TCPDF (www.tcpdf.org)</p><p>13 / 13</p><p>https://www.dumpsinfo.com/</p><p>http://www.tcpdf.org</p>