Text Material Preview
Aruba Certified Campus Access Mobility Expert Written Exam Version: Demo [ Total Questions: 10]Web: www.certsout.com Email: support@certsout.com HP HPE7-A07 https://www.certsout.com https://www.certsout.com/HPE7-A07-test.html IMPORTANT NOTICE Feedback We have developed quality product and state-of-art service to ensure our customers interest. If you have any suggestions, please feel free to contact us at feedback@certsout.com Support If you have any questions about our product, please provide the following items: exam code screenshot of the question login id/email please contact us at and our technical experts will provide support within 24 hours.support@certsout.com Copyright The product of each order has its own encryption code, so you should use it independently. Any unauthorized changes will inflict legal punishment. We reserve the right of final explanation for this statement. HP - HPE7-A07Certs Exam 1 of 9Pass with Valid Exam Questions Pool A. B. C. D. A. B. C. D. E. Question #:1 You deployed UBT tosecurely tunnel traffic from user desktop PCs connected behind VOIP phones Ail other non-UBT dents are connected to a different network. After the deployment users reported interruptions lo their phone service The VLAN on which UBT clients are placed is not configured on the switch uplink and traffic from the VoIP phones is being dropped You tailed to correctly configure a user-defined VRF to support the UBT clients behind the VoIP phones, causing traffic to drop. Broadcast/multicast packets are copied to both the tunnel and locally, causing duplicate packets and network instability The UBT client broadcast/multicast packets returned to the same switch port and corrupted the phones IMC table Answer: A Explanation If users report interruptions to their phone service after the deployment of User-Based Tunneling (UBT), it can be due to the VLAN designated for UBT clients not being configured on the switch uplink. As a result, traffic from VoIP phones, which may be trying to use the same VLAN, could be dropped, leading to service interruptions. Ensuring that the VLAN is properly configured on the switch uplink is crucial for the seamless operation of UBT clients and VoIP services. Question #:2 Which statements accurately describe OSPF Graceful Restart (when the restarting router is able to Keep its forwarding tables across the restart)? (Select two.) The GR helper role is supported on AOX-CX 6100 switches. VSF Failover and Graceful-Restart require a VSF secondary member in the VSF stack Bidirectional Forwarding Detection for OSPF and GR are mutually exclusive features. OSPF Routers listen for Grace-LSAs on each network segment where there is an OSFP adjacency. You must ensure your VSF stack has a secondary member when acting as a GR helper Answer: A D Explanation Graceful Restart (GR) allows a router to continue forwarding packets while it restarts its OSPF process. The GR helper role on AOS-CX switches supports routers during this process. OSPFrouters listen for Grace-LSAs to identify neighbors undergoing a graceful restart, maintaining adjacencies with those routers to allow HP - HPE7-A07Certs Exam 2 of 9Pass with Valid Exam Questions Pool A. B. C. D. uninterrupted forwarding. Question #:3 Exhibit. An engineer has applied the above configuration to R1 and R2 However the routers OSPF adjacency never progresses past the "EXSTART-DR" slate as shown below. Which configuration action on either router will allow R1 and R2 to progress past the "EXSTART/DR" state? Change R1 and R2 to a network type of point-to-point. Remove the layer 3 MTU configuration. Ensure the OSPF process is not configured with passive-interface default. Change the IP address and mask applied to interface 1/1/1. Answer: A Explanation In OSPF, the "EXSTART/DR" state indicates that the routers are trying to establish an adjacency but are unable to progress. This can happen if the OSPF network type is incorrectly configured for the type of connection between the routers. Given that R1 and R2 are connected via a point-to-point link (as suggested by HP - HPE7-A07Certs Exam 3 of 9Pass with Valid Exam Questions Pool A. B. C. D. the /31 subnet), setting the network type to point-to-point on both routers will remove the need for DR/BDR election, which is unnecessary on a point-to-point link, and allow OSPF to progress past the "EXSTART" state and form a full adjacency. Question #:4 Your customer’s employees connected to a wired network are complaining about a poor user experience. The customer has UXI sensors deployed on their premises. These sensors nave been running for multiple months. They are testing both the wired network (using the wired Interface of each sensor) and the wireless networks. Your customer used the UXI dashboard to find the reason for the poor userexperience to find more details, the customer asked you to check the packet captures that have been downloaded from the sensors using the UXI dashboard. From the zip file downloaded from the UXI sensors, you checked the "datagrams" .pcap file, but you were not able to find any issues How can you explain this? The "datagrams- pcap file only contains me successful tests Failed tests are contained in the "datagrams-failed" .pcap file The UXI sensor could not upload the latest test results to the cloud, so the packet capture is outdated The datagrams captured on the physical Ethernet interface are in a different .pcap file. The default filers of the packet captures do not allow tailed tests to be captured by the sensor Answer: A Explanation It is a common practice to separate successful and failed test results into different files for ease of troubleshooting. If the "datagrams.pcap" file shows no issues, it's likely because it only contains successful test data, and the failed tests that could explain the poor user experience would be in a different file, such as "datagrams-failed.pcap." Question #:5 Your customer is requesting a4-ciass LAN queuing model tor QoS. Following best practices, match the PHB/DSCP values to the application types. HP - HPE7-A07Certs Exam 4 of 9Pass with Valid Exam Questions Pool Answer: Explanation Best Effort and Scavenger =DF (0)Bulk and Transactional Data =AF21 (18)Multimedia Streaming =AF31 (26)Real-Time Interactive =EF (46) Question #:6 Exhibit. HP - HPE7-A07Certs Exam 5 of 9Pass with Valid Exam Questions Pool HP - HPE7-A07Certs Exam 6 of 9Pass with Valid Exam Questions Pool A. B. C. D. Which statement is true given the following CLI output from a CX 6300? There are no active fabric clients on the CX switch with RD 172.16.10.1 A wired client with IP address 10.203 1.100 is on a remote CX 6300 in the fabric with loopback IP address 172.21.11.2. A wired client with IP address 10 203 1 100 has a host route that is not being properly advertised The overlay loopbacK addresses are advertised in the faerie with 2d-bit subnet masks Answer: B Explanation The CLI output provided shows routing information from a CX 6300 switch. The output under "VRF: default" shows various IP routes, including a route for 10.203.1.100/32 with a next hop of 172.21.11.2. This indicates that the route to the client with IP address 10.203.1.100 is known in the network and is reachable via another device in the fabric, which has the loopback IP address 172.21.11.2. Since the route is present in the routing table, it means that the client is known and active within the fabric network. Question #:7 Exhibit. HP - HPE7-A07Certs Exam 7 of 9Pass with Valid Exam Questions Pool A. B. C. D. A. Which user role will be assigned when a voice client tries to connect for the first time, but the RADIUS server is unavailable? CRITICAl_AUTH DEFAULT_AUTH CRIT1CAL_V0ICE PRE_AUTH Answer: C Explanation In the provided configuration for interface 1/1/7, there are roles specified for different scenarios concerning authentication.When a voice client attempts to connect and the RADIUS server is unreachable, the role that is assigned is the one specified as the "critical-voice-role". In this case, the "CRITICAL_VOICE" role is configured to be assigned under such circumstances, ensuring that voice clients receive appropriate network access permissions even when the RADIUS server is not available to authenticate them. Question #:8 A network administrator wants to configure an 802 1X supplicant for a wireless network that includes the following: 1. AES encryption 2. EAP-MSCHAPv2-based user and machine authentication 3. validation of server certificate in Microsoft Windows 10 The network administrator creates a WLAN profile and selects the change connection settings option Then the network administrator changes the security type to Microsoft Protected EAP (PEAP) and enables user and machine authentication under Additional Settings. What must the network administrator do next to accomplish the task? Enable user authentication HP - HPE7-A07Certs Exam 8 of 9Pass with Valid Exam Questions Pool B. C. D. A. B. C. D. Change the security type to Microsoft: Smart Card or other certificate. Change default RC4 encryption for AES Enable server certificate validation Answer: D Explanation When configuring an 802.1X supplicant for wireless network access with Microsoft Windows 10, enabling server certificate validation is a critical step to ensure the security of the authentication process. Server certificate validation helps prevent man-in-the-middle attacks by ensuring the RADIUS server presenting the certificate is the correct server that the client expects to communicate with. Question #:9 You configured a WPA3-SAE with the following MAC Authentication Role Mapping inCloud Authentication and Policy: With further default settings assume a new Android phone is connected to the network. Which role will the client be assigned after connecting forthe first time? byod client will be rejected network access lot-local unmatched-device Answer: D Explanation The configuration shown in the third exhibit details a client role mapping that associates different client profile tags with specific client roles. When a new device, such as an Android phone, connects to the network, it will HP - HPE7-A07Certs Exam 9 of 9Pass with Valid Exam Questions Pool A. B. C. D. E. be profiled and assigned a role based on the mappings defined. If the device does not match any predefined profiles, it would be assigned the "unmatched-device" role. This is under the assumption that default settings are in place and the client does not match the criteria for any of the specific roles like "byod", "iot-internet", or "iot-local". Therefore, an Android phone connecting for the first time and not matching any specific profile tag would be assigned to the "unmatched-device" role. Question #:10 An ACME company employee complained about a recent poor-quality VoIP call while moving aroundtheir office environment HPE Aruba Networking Central reported a fair UCC score for this callwhile your VoIP engineer reported that their systems reported a MOS of 2,3. The VoIP devices are operatingover the 5GHz frequency band. What are the possible contributing factors? (Select two.) Coverage AP deployment plans generally don't support enough cell overlap for VoIP. 802.tr is enabled in the WLAN Security settings. There was localized interference at the caller’s location 802.1K is disabled in the WLAN Security settings The client roamed into an area that continuously operates Zigbee. Answer: A E Explanation VoIP quality can be negatively impacted by insufficient cell overlap in AP deployment plans, which can cause poor handoffs between APs as a user moves around. This results in a degraded VoIP experience. Additionally, roaming into an area with continuous Zigbee operation can cause interference with the 5GHz frequency band, further contributing to poor VoIP call quality. The Zigbee communication protocol operates on the same frequency band as Wi-Fi and can introduce noise and interference, which leads to a reduced MOS score, as reported by the VoIP engineer. About certsout.com certsout.com was founded in 2007. We provide latest & high quality IT / Business Certification Training Exam Questions, Study Guides, Practice Tests. We help you pass any IT / Business Certification Exams with 100% Pass Guaranteed or Full Refund. Especially Cisco, CompTIA, Citrix, EMC, HP, Oracle, VMware, Juniper, Check Point, LPI, Nortel, EXIN and so on. View list of all certification exams: All vendors We prepare state-of-the art practice tests for certification exams. You can reach us at any of the email addresses listed below. Sales: sales@certsout.com Feedback: feedback@certsout.com Support: support@certsout.com Any problems about IT certification or our products, You can write us back and we will get back to you within 24 hours. https://www.certsout.com https://www.certsout.com/vendors.html https://www.certsout.com/Apple-Practice-Test.html https://www.certsout.com/Cisco-Practice-Test.html https://www.certsout.com/Citrix-Practice-Test.html https://www.certsout.com/CompTIA-Practice-Test.html https://www.certsout.com/EMC-Practice-Test.html https://www.certsout.com/ISC-Practice-Test.html https://www.certsout.com/IBM-Practice-Test.html https://www.certsout.com/Juniper-Practice-Test.html https://www.certsout.com/Microsoft-Practice-Test.html https://www.certsout.com/Oracle-Practice-Test.html https://www.certsout.com/Symantec-Practice-Test.html https://www.certsout.com/VMware-Practice-Test.html
