Nutanix NCP-MCI-6.5 Exam Dumps

Text Material Preview

Dumpsinfo is a good website providing the latest exams information and dumps
questions for all hot IT certification exams, such as Microsoft, Cisco, Huawei, 
IBM, VMware, Fortinet, and so on.
Features of Dumpsinfo’s products
Instant Download
Free Update in 3 Months
Money back guarantee
PDF and Software
24/7 Customer Support
Besides, Dumpsinfo also provides unlimited access. You can get all Dumpsinfo
files at lowest price.
Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) v6.5 exam
NCP-MCI-6.5 exam free dumps questions are available below for you to study. 
Full version: NCP-MCI-6.5 Exam Dumps Questions
1.An administrator has created a Nutanix managed it a VLAN ID of 512.
Several VMs have been created, and the administrator notices that the can successfully communicate
with other VMs on that VLAN.
Provided they are on the host, but cannot communicate with VMs that reside on different hosts in the
cluster.
What is most likely thee cause of this issue?
A. There is a firewall rule blockingVLAN512 traffic.
B. VLAN512 is a reserved VLAN ID, and not usable for guest VMs.
C. The VLAN was not created on the upstream switches.
Answer: C
2.HOTSPOT
Async DR is configured between two sites. A network outage occurs at the primary site.
 1 / 11
https://www.dumpsinfo.com/vendors/microsoft/
https://www.dumpsinfo.com/vendors/cisco/
https://www.dumpsinfo.com/vendors/huawei/
https://www.dumpsinfo.com/vendors/ibm/
https://www.dumpsinfo.com/vendors/vmware/
https://www.dumpsinfo.com/vendors/fortinet/
https://www.dumpsinfo.com/unlimited-access/
https://www.dumpsinfo.com/exam/ncp-mci-6-5
Which steps must the administrator perform to bring the VMs back into service at the backup site?
Item instructions: For each procedure, indicate the order in which that procedure must take place to
meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the
drop-down option.
 2 / 11
 3 / 11
Answer:
Explanation:
3.A system administrator needs to add more VMs to their Nutanix cluster.
Which two actions should the administrator perform to determine if the current cluster can
accommodate the new VMs? (Choose two)
A. Enable Deduplication and Ensure Coding
B. Utilize Optimize Resources for VM efficiency
C. Determine utilization with Cluster Runway
D. Perform an inventory with Life Cycle Management
Answer: BC
4.An administrator has a Custom backup application that requires a 2TB disk and runs m Windows.
Throughput is considerably lower than expected.
The application was installed on a VM with the following configuration:
• FOU vCPUs with one core/vCPU
• 4GB of Memory
• One 50GB vDisk for the Windows installation
• One 2TB vDisk for the application
What is the recommended configuration change to improve throughput?
A. Add 4GB of memory to the VM
B. Increase the vCPUs assigned to the VM
 4 / 11
C. Span the 2TB disk across four vDisks
D. Increase the number of cores per vCPU
Answer: D
5.What is the default network bond setting for an AHV host configuration?
A. active-backup
B. active-active
C. balance-slb
D. balance-tcp
Answer: A
Explanation:
https://next.nutanix.com/blog-40/network-load-balancing-with-acropolis-hypervisor-6463
6.Upon logging into Prism Central, an administrator notices high cluster latency.
How can the administrator analyze data with the least number of steps or actions?
A. Modify Data Density in the main Prism Central dashboard.
B. Click on the chart in the widget to expand the data elements.
C. Take note of the duster name and create a new Analysis chart.
D. Click the cluster name in the cluster quick access widget.
Answer: B
7.An administrator needs to deploy an application with a large amount of data connected via Nutanix
volumes.
Which two actions should the administrator take when designing the Volume Group? (Choose two.)
A. Distribute workload across multiple virtual disks
B. Enable RSS (Receive Side Scaling)
C. Use multiple subnets for iSCSI traffic
D. Enable thick provisioning on the Volume Group(s)
Answer: AB
8.The administrator recently had a node fail in an AHV Nutanix cluster. All of the VMs restarted on
other nodes in the cluster, but they discovered that the VMs that make up a SQL cluster were running
on the failed host. The administrator has been asked to take measures to prevent a SQL outage in
the future.
What affinity option will prevent the SQL VMs from running on the same hos?
A. VM-VM anti-Affinity policy
B. Create Affinity Category
C. VM-Most Affinity policy
D. Create Affinity Project
Answer: A
9.An administrator has received reports of users being disconnected from remote desktop sessions to
a specific VM.
Which VM metric is most useful isolating the cause of the issue?
A. Storage Controller Bandwidth
B. Swap-Out Rate
C. Hypervisor CPU Ready time (%)
 5 / 11
D. Virtual NIC receive packet dropped
Answer: D
10. Where can an administrator change a CVM password?
A. KMS Server Terminal
B. CVM setting in Prism Element
C. CVM setting in Prism Central
D. Prism CVM VM Console
Answer: D
Explanation:
Reference: https://next.nutanix.com/installation-configuration-23/modifying-passwords-in-nutanix-
environment-33538
11.A customer has a newly-deployed AHV cluster with nodes that have 2.x 10 GBE and 2.x interface.
The customer wants to use all available network interfaces to provide connectivity to the VMs.
Which option should the administrator use to achieve this while remaining consistent with Nutanix
recommendations?
A. Create separate VLANs that map 10GbE and 1GbE interfaces.
B. Createbond1 on virbr0 and add the 1GbE interfaces to it for VM use.
C. Create a second bond on br0 on each host and assign the 1 GbE interfaces to it.
D. Create a second bridge on each host and assign the 1GbE interfaces to it.
Answer: D
12.When creating a VM on an AHV cluster, how is the initial placement of the VM determined?
A. AHV uses a round robin algorithm, placing new VMs onto hosts based on the numerical order of
their UUID
B. The administrator right clicks on the desired host and selects Power on VM from the dropdown
menu
C. The Acropolis Dynamic Scheduler selects a host which provides adequate resources for the VMs
configuration
D. Placement is determined by the host that holds the new_VM token at the time of VM creation
Answer: C
13.An administrator logs into the Nutanix Support Portal and notices there is a new version of the
LCM Framework available. In an effort ensure LCM is providing the latest features, the administrator
would like to upgrade LCM.
How can the LCM Framework be upgraded?
A. Perform an LCM inventory
B. Upload the latest LCM Framework as an image in the image Configuration in Prism
C. Upload the latest LCM Framework bundle via Upgrade Software in Prism
D. Upgrade AOS
Answer: A
14.While installing Windows 2019 on a new VM on an AHV cluster, an administrator notices there
aren’t any drives listed for the install.
What might the problem be?
A. VirtIO drivers have not yet been installed and the disks are IDE disks.
 6 / 11
B. VirtIO drivers have not yet been installed and the disks are SCSI disks.
C. VirtIO drivers must be installed on AHV for installations of Windows.
D. VirtIO drivers aren’t supported on this version of Windows 2019.
Answer: B
15.What Nutanix feature provides effective caching optimization In VDI environments?
A. Remote Protection Group
B. Local Protection Group
C. Snap Clones
D. Shadow Clones
Answer: D
16.HOTSPOT
What is the proper sequence to perform a one-click upgrade to a Nutanix cluster?
Item instructions: For each procedure, indicate the order in which that procedure must take place to
meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the
drop-down option.7 / 11
 8 / 11
Answer:
Explanation:
Step 1 ---> Login into Prism Element.
Step 2 ---> Select the Gear Icon at top right of the page.
Step 3 ---> Click Upgrade Software.
Step 4 ---> Select the component to upgrade.
Step 5 ---> Click download.
Step 6 ---> Once the download completes, select upgrade.
Invalid:
1 - Select Prism Central.
2 - Select user login.
3 - On left select upgrade Prism Central.
17.On a Nutanix cluster, what does Network Segmentation refer to?
A. A distributed firewall for security VM to VM traffic.
B. Physically separating management traffic from guest VM traffic.
C. Isolating intra-cluster traffic from guest VM traffic.
D. Isolating management traffic from storage replication traffic.
Answer: D
18.Which capability refers to the storage of VM data on the node where the VM is running and ensure
that the read I/O does not have to traverse the network?
A. Intelligent Locally
B. Data Locality
C. Intelligent Tiering
D. Data Tiering
Answer: B
19.1.An administrator wants to receive an environment summary report when a host failure occurs.
Which action would address the administrator’s need?
A. Enable App Discovery
B. Edit report schedule
C. Configure an alert policy
D. Create a playbook
Answer: C
Explanation:
An alert policy can be configured to send out an environment summary report when a host failure
occurs. This can be done by creating a policy that triggers an alert whenever a host fails and then
configuring the policy to send out a report that provides a summary of the environment in which the
failure occurred. This will allow the administrator to quickly get a view of the environment after a
failure occurs, allowing them to take the necessary steps to address the issue.
20.An administrator notices that most of the VMs in the cluster are on one host. Users report that an
application seems to respond slowly. The application server VM has significantly more memory
assigned to it than other VMs.
How should the administrator fix this issue?
 9 / 11
A. Reduce the amount of memory assigned to the VM.
B. Migrate the VM to a different host.
C. Add more memory to the VM.
D. Increase the memory on the CVM.
Answer: B
21.In which two scenarios is an automated live migration likely to occur? (Choose two)
A. Cluster resource hotspot
B. AOS upgrade
C. Network upgrade
D. Hypervisor upgrade
Answer: A, D
22.An administrator logs in to Prism Element goes to the Network view, and sees the output shown in
the exhibit.
Which three steps must the administrator take to increase throughput to the host? (Choose three.)
A. Connect the 10Gb interfaces to the physical switch.
B. Change the bond mode to balance-slb or balance―tcp.
C. Remove any 1Gb interfaces still connected from the default bond.
D. Add a new switch to the network and connect 1Gb interfaces to it.
E. Change the VLAN ID to a higher priority ID.
Answer: A, B, E
23.After configuring modules for a Remote Syslog Server, the settings are as shown. The
administrator notices that even though the level parameter is set to EMERGENCY, that all monitor
logs are being sent.
What is the likely cause of this issue?
A. A second rsyslog server is configured to send all monitor logs.
B. Having the Module Name set to STARGATE sends all monitor logs regardless of the level.
C. A Log Level of EMERGENCY includes all monitor logs.
D. The true setting for Include Monitor Logs sends all monitor logs regardless of the level.
Answer: C
24.Which two permission assignment tasks can be accomplished via Prism Element? (Choose two.)
A. Grant a user permission to create VMs on a specific storage container
 10 / 11
B. Grant a user permission to view details of all VMs on a specific cluster
C. Grant an active directory group permission to perform back operations
D. Grant a user permission to create and delete snapshots on a specific VM
Answer: AD
Explanation:
The two permission assignment tasks that can be accomplished via Prism Element are
A. Grant a user permission to create VMs on a specific storage container and
D. Grant a user permission to create and delete snapshots on a specific VM. With Prism Element,
administrators can assign permissions to users and groups on a per-cluster, per-VM, or per-storage
container basis. This allows them to control who can access which resources and perform which
operations.
 11 / 11