Text Material Preview
D-NWG-FN-23 Dell Networking Foundations 2023 exam dumps questions are the best material for you to test all the related DELL EMC exam topics. By using the D-NWG-FN-23 exam dumps questions and practicing your skills, you can increase your confidence and chances of passing the D-NWG-FN-23 exam. Features of Dumpsinfo’s products Instant Download Free Update in 3 Months Money back guarantee PDF and Software 24/7 Customer Support Besides, Dumpsinfo also provides unlimited access. You can get all Dumpsinfo files at lowest price. Dell Networking Foundations 2023 D-NWG-FN-23 exam free dumps questions are available below for you to study. Full version: D-NWG-FN-23 Exam Dumps Questions 1.What is the network address for the IP address 10.5.6.73 with subnet mask 255.255.255.192? A. 10.5.6.0 B. 10.5.6.73 C. 10.5.6.64 D. 10.0.0.0 Answer: C 2.What are the default credentials for the Dell EMC OpenManage Network Manager? A. Username = admin | Password = admin B. Username = root | Password = root C. Username = root | Password = calvin D. Username = admin | Password = password 1 / 10 https://www.dumpsinfo.com/unlimited-access/ https://www.dumpsinfo.com/exam/d-nwg-fn-23 Answer: A 3.Refer to the output: A network outage occurs. A technician tries to log in to a switch by Telnet using the correct local username and password. What is causing the login failure? A. Authentication is not enabled on Telnet. B. Local accounts are not allowed. 2 / 10 https://www.dumpsinfo.com/ C. TACACS credentials are not being used. D. A Telnet approved account must be used. Answer: B 4.Which option is used to configure Network Address Translation (NAT) so that a large number of private IP addresses can be mapped to a few public addresses? A. Outside B. PAT C. Overload D. Inside Answer: C 5.Which statement is true about the following command? smartfabric l3fabric enable role LEAF vlti ethernet 1/1/4? A. One of the switches within the fabric will be chosen as the Spine. B. The port ethernet 1/1/4 must connect to a server. C. The command must be run in only one switch. D. The port ethernet 1/1/4 will be used as a VLTi interface. Answer: D 6.What is the default route preference value for OSPF? A. 1 B. 110 C. 120 D. 200 Answer: B 7.Which Dell EMC Networking N-Series model has 4 x integrated 10GbE SFP+ ports? A. N1524P B. N1548 C. N3048EP-ON D. N3132PX-ON Answer: D 8.What is the default OSPF “hello interval”? A. 5 seconds B. 10 seconds C. 15 seconds D. 30 seconds Answer: B 9.Which sequence represents a TCP half closed session? A. SYN, ACK, and SYN B. FIN, ACK, and SYN C. SYN, ACK, and FIN D. FIN, ACK, and FIN 3 / 10 https://www.dumpsinfo.com/ Answer: D 10.Which of the following is an IPv4 address? A. 224.0.0.3/8 B. 172.16.225.0/23 C. 10.0.0.255/16 D. 192.168.0.3/30 Answer: C 11.Refer to the output shown: console (config-if-Tel/0/1) #switchport general allowed vlan add 2-6 console (config-if-Tel/0/1) #show interfaces switchport tengigabitethernet 1/0/1 Port: Tel/0/1 VLAN Membership Mode: General Mode Access Mode VLAN: 1 (default) General Mode PVID: 1 (default) General Mode Ingress Filtering: Enabled General Mode Acceptable Frame Type: Admit All General Mode Dynamically Added VLANs: General Mode Untagged VLANs: 1-6 General Mode Tagged VLANs: General Mode Forbidden VLANs: Trunking Mode Native VLAN: 1 (default) Trunking Mode Native VLAN Tagging: Disabled Trunking Mode VLANs Enabled: All Private VLAN Host Association: none Private VLAN Mapping: Private VLAN Operational Bindings: Default Priority: 0 Protected: Disabled Te1/01 interface must allow VLANs 2-6 and follow the 802.1Q standard. Which change should be made to meet the requirements? A. Add “tagged” command before VLAN ID B. Add “tagged” at the end of the command C. Add “trunk” at the end of the command D. Add “802.1Q” at the end of the command Answer: B 12.A technician configures RIP on a new N-Series switch to connect to an existing switch that runs RIP. The routing table is not populating even after the network statements are added. What is a possible cause of this issue? A. The existing switch has not been configured with the command “hostroutesaccept”. B. The new switch’s interface is in the wrong subnet to form a RIP relationship. C. The “ip helper-address” command has not been configured on the existing switch. D. The other switch is not a root bridge and cannot form an RIP relationship. Answer: B 13.In IPv6 addressing, what refers to four binary characters? A. Byte B. Bit C. Nibble D. Block Answer: C 14.What accurately describes an ICMP error message? 4 / 10 https://www.dumpsinfo.com/ A. ICMP error message will be generated for a datagram having a multicast address B. ICMP error message will not be generated for a datagram having an address of 127.0.0.0 C. ICMP error message will be generated for a fragmented datagram that is not the first fragment D. ICMP error message will be generated in response to a datagram carrying an ICMP error message Answer: B 15.Several PCs are connected together using an Ethernet hub. How does an Ethernet network interface card recognize that a collision has occurred? A. Frame is larger than the maximum transfer unit B. Transmitted frame contains two destination addresses C. Abnormal voltage due to the overlapping of the two signals D. Transmitting stations send collision warnings Answer: C 16.Which BASE-T Ethernet standard specifies a CAT6 cable type? A. 2.5GBASE-T B. 5GBASE-T C. 10BASE-T D. 10GBASE-T Answer: D 17.Which type of domains are connected by a Layer 2 switch? A. Single collision domain and a single broadcast domain B. Multiple broadcast domains and multiple collision domains C. Multiple collision domains and a single broadcast domain D. Single collision domain and multiple broadcast domains Answer: C 18.Which network device functions only at Layer 1 of the OSI model? A. Switch B. Bridge C. Hub D. Router Answer: C 19.How many layers are in the TCP/IP model? A. 4 B. 5 C. 6 D. 8 Answer: A 20.Which of the following is an optional LLDP TLV? A. Chassis ID B. System Name C. Port ID 5 / 10 https://www.dumpsinfo.com/ D. Time-to-live Answer: B 21.Refer to the exhibit. A technician is troubleshooting IP connectivity between two servers connected to the same N3024 switch. Server 1 is configured with a gateway of 192.168.1.1 and can ping its gateway. Server 2 is configured with gateway of 192.168.2.1 and can ping its gateway. Both servers are pingable by the N3024. The servers cannot ping each other. What is causing this issue? A. Network MTU needs to be increased B. "ip routing" is disabled on the N3024 C. Server firewall is not allowing ICMP traffic to be passed D. Server subnets overlap but are in different VLANs Answer: B 22.Which command shows active telnet sessions on Dell N-Series switches? A. Show hosts B. Show sessions C. Show users accounts D. Show line telnet Answer: B 6 / 10 https://www.dumpsinfo.com/ 23.A network administrator wants to use a subnet that will only have two host addresses. Which subnet mask meets this requirement? A. 255.255.255.248 B. 255.255.255.252 C. 255.255.255.254 D. 255.255.255.256 Answer: B 24.Two hosts are able to ping each other when directly connected. When the hosts are connected to ports Gi1/0/1 and Gi1/0/2 on a Dell EMC Networking N-Series switch, the process fails. Based on the graphic, why does the ping fail? A. LACP is not enabled on the switch B. Ports are configured on different VLANs C. Ports are configured on the same VLANs D. Spanning Tree is blocking an interface Answer: B 25.Which command sequence leads to the successful creation of a Layer 3 port channel on an OS10 switch? A. 1(config-if-po-2)# ip address 192.168.0.0/31 S1(config-if-po-2)# no switchport B. S1(config-if-po-2)# ip address 192.168.0.0/31 S1(config-if-po-2)# no switchport C. S1(config-if-po-2)# ip address 192.168.0.0/31S1(config-if-po-2)# switchport mode IPv4 7 / 10 https://www.dumpsinfo.com/ D. S1(config-if-po-2)# no switchport S1(config-if-po-2)# ip address 192.168.0.0/31 Answer: D 26. Which subnet mask provides only two valid IP addresses that can be assigned to hosts? A. 255.255.255.248 B. 255.255.255.254 C. 255.255.255.252 D. 255.255.255.256 Answer: C 27.A network administrator needs to identify which MAC addresses are static. Under which column in the output of the show mac-address-table command is this information displayed? A. Interface B. Type C. MAC address D. State Answer: B 28.What is the FCS field used for in an Ethernet frame? A. Redirect ICMP messages back to the originator B. Ensure the frame was not corrupted during transmission C. Resolve ARP requests D. Look up the destination address Answer: B 29.Which command enables the read-write network monitoring community string? A. #snmp-server community public ro B. #snmp-server community netmon rw C. #snmp-server community private wr D. #snmp-server community public read Answer: B 30.A service technician is deploying four Dell N-Series switches in a company's network. The technician has enabled the spanning tree protocol on the switches. Which switch would the spanning tree protocol select as a root bridge? A. 22-33-44-55-66-77 : 32768 B. 11-22-33-44-55-66 : 36864 C. 22-33-44-55-66-78 : 32768 D. 11-22-33-44-55-65 : 32768 Answer: D 31.A Dell Networking N3024 has a link aggregation configured as shown: interface Gi1/0/1 channel-group 1 mode active 8 / 10 https://www.dumpsinfo.com/ exit ! interface Gi1/0/2 channel-group 1 mode active exit ! interface port-channel 1 switchport access vlan 10 exit After connecting all cables, the port-channel does NOT work as expected. As part of the troubleshooting process, the technician examines the “show lldp” displayed: What is the most likely cause for the issue on the port-channel? A. The interface port-channel is not using 10Gbps interfaces. B. The interfaces on the N2024 switches are running LACP. C. The interface port-channel is not configured in trunk mode. D. The interfaces are connected to different switches. Answer: D 32.What is the decimal equivalent of the binary number 10101010 in IPv4? A. 162 B. 170 C. 192 D. 244 Answer: B 33.Which type of account would provide access to view the switch configuration without allowing the user to configure the switch? A. secadmin B. netoperator C. netadmin D. sysadmin Answer: B 34.What information is used to define an extended MAC ACL filter? A. Ethernet frame type and frame size B. Destination TCP port number and source MAC address C. Destination MAC address and Ethernet frame type D. Source and destination MAC addresses Answer: D 9 / 10 https://www.dumpsinfo.com/ Powered by TCPDF (www.tcpdf.org) 10 / 10 https://www.dumpsinfo.com/ http://www.tcpdf.org
