Baixe o app para aproveitar ainda mais
Prévia do material em texto
SL150 (Answer all questions in this section) 1. Which version of the SNMP standard are supported by the SL150 library? Mark for Review (1) Points Version 2c only Only version 2c plus backward compatibility to previous versions Version 3 only Both version 2c and 3 (*) Correct Correct! 2. What features does the new library GUI in the Remote Bro wser Interface include in the SL150? Mark for Review (1) Points (Choose all correct answers) Manage settings (*) Monitor library health (*) Perform library operations (*) Organize magazines Correct Correct! 3. Which of these statements about SL150 licensing is true? Mark for Review (1) Points The SL150 license is generated at time of order The SL150 license is generated at time of installataion The SL150 licenses are downloaded from the edelivery site The SL150 does not have a license (*) Correct Correct! 4. Which of these elements cannot be proactively monitored with the SL150 Mark for Review (1) Points CRU replacement indication Location and health properties of drives Status of server system (*) Location, module, generation, and SCSI address of cartridges Correct Correct! 5. To increase customer ease of use, all but which of the f ollowing are Customer Replaceable Units of the SL150? Mark for Review (1) Points Backplane Card (*) Power Supplies Operator Panel LTO Tape Drives Robot Module Incorrect Sorry, that is not correct. Please review the course con tent and try again. SL150 (Answer all questions in this section) 6. Which of these statement about encryption in the SL150 i s correct? Mark for Review (1) Points OKM encryption with the SL150 became available with the LTO6 The SL150 supports encryption with OKM 3 only The SL150 supports encryption with OKM 2.5 and 3 (*) The SL150 does not currently support encryption Correct Correct! 7. The base model of the SL-150 features how many USB ports ? Mark for Review (1) Points seven six eight nine (*) Correct Correct! 8. The SL150 supports the following drives: Mark fo r Review (1) Points T10KD LTO5 and LTO6 (*) LTO4 and LTO5 LTO4, LTO5 and LTO6 Correct Correct! 9. Basic library initialization performed from the touch sc reen of the SL150 front control panel involves the following tasks: Mark fo r Review (1) Points (Choose all correct answers) Changing the default administrator password (*) Configuring the library network interface (*) Setting the date and time for the library (*) Creating a partition Correct Correct! 10. The initial SL150 touch screen default password is: Mark for Review (1) Points passw0rd (*) password null changeme Correct Correct! 11. The SL150 remote browser graphical user interface can be used to configure the following tasks: Mark for Review (1) Points Creating Additional User Accounts Partitioning and Configuring Tape Drives Configuring Drive Cleaning Operations Options 1 and 2 only All of the above (*) Correct Correct! 12. Which of the following are hot-swappable components for the SL150? Mark for Review (1) Points LTO Drives and Operator Panel Expansion Unit and Magazines LTO Drives and Power Supplies (*) LTO Drives and Magazines Correct Correct! 13. The SL150 library can be divided into a maximum of how m any partitions with each having at least one tape drive and one magazine? Mark for Review (1) Points 4 2 12 8 (*) Correct Correct! 14. The main approaches to monitoring the health and operati ons of the StorageTek SL150 Modular Tape Library System are: Mark for Review (1) Points (Choose all correct answers) Reading the event log Monitoring the Library from the User Interface (*) Reviewing SL150healthstatus.log All of the above Using Simple Network Management Protocol (SNMP) (*) Incorrect Sorry, that is not correct. Please review the course con tent and try again. 15. The SL150 is being released as a replacement for which l ibrary(ies)? Mark for Review (1) Points SL700, SL500 SL24/48, SL700, SL500 SL500, SL3000 SL500, SL24, SL48 (*) Correct Correct! 16. What will be the indication when the drive is performing an Initial Program Load (IPL) or initialization? Mark for Review (1) Points The LED will flash green until the load is complete The LED will have a fast amber flash until the load is complete The LED will have a solid red light until the load is complete The LED will flash red slowly for about two minutes (*) Incorrect Incorrect. Refer to Introduction to Oracle StorageTek Ta pe Drive Technology for more information. 17. Which statistical information is NOT included in the Med ia Information Region (MIR)? Mark for Review (1) Points Last 5 mounts statistics The physical address of the last mounted tape drives (*) Total bytes read and written to the cartridge and number of files on tap e End of Data block number and position Total number of months (used to determine expiration) Incorrect Incorrect. Refer to Introduction to Oracle StorageTek Ta pe Drive Technology for more information. 18. The MIR or media information region is a directory, that is written to the back of the tape as a result of an unload command. Mark fo r Review (1) Points 1 0 (*) Incorrect Incorrect. Refer to Introduction to Oracle StorageTek Ta pe Drive Technology for more information. Fibre Channel Fundamentals (Answer all questions in this section) 19. Fibre-optic cables transmit what type of signals ? Mark for Review (1) Points Analogue Optical (*) Power Electrical Correct Correct 20. If a tape drive experiences a problem during a read oper ation it will do which of the following first ? Mark for Review (1) Points Execute the next command Report the problem to the host by sending sense data (*) Read to the end of the tape Eject the cartridge Incorrect Incorrect. Please refer to the �StorageTek StorageTek Fibre Channel Fundamentals for Tape Drives� course for more information. 21. In a fabric topology, tape drives use how many bits for addressing ? Mark for Review (1) Points 8 16 24 (*) 36 Correct Correct 22. A fabric topology includes which of the following ? Mark for Review (1) Points Point-to-point connections Ethernet cables Switches and / or directors (*) Only hubs Correct Correct 23. When a tape drive in a fabric network is powered on, wha t is the next step in the sequence required for it to be able to operate as part of the network ? Mark for Review (1) Points Port Login (PLOGI) Process Login (PRLI) Fabric Login (FLOGI) (*) Fabric registration Correct Correct 24. Architectural layer FC-0 describes which of the followin g ? Mark for Review (1) Points The protocol The flow control The upper level mapping The hardware (*) Correct Correct 25. A World Wide Port Name is assigned to what ? Mark fo r Review (1) Points The ESCON Director All Nodes The hub Each port of an HBA and each port of a tape drive (*) Correct Correct 26. What is a possible source of light in a Fibre Channel ne twork ? Mark for Review (1) Points Glass fiber Laser (*) Electrical impulse Fluorescent light Correct Correct 27. How many layers are defined in the Fibre Channel archite cture ? Mark for Review (1) Points 8 16 4 (*) 1 Correct Correct Ethernet Fundamentals (Answer all questions in this section) 28. What is needed to run the diagnostics from the VOP ? Mark for Review (1) Points A remote connection A Fibre Channel network connection A site server with STDS installed A laptop with the service VOP installed (*) Incorrect Incorrect. Please refer to the �StorageTek StorageTek Ethern et Fundamentals for T-Series Tape Drives� course for more information. 29. What type of physical connector is used for Ethernet cab les ? Mark for Review (1) Points D Style RS-422 N_Port RJ45 (*) Correct Correct 30. Why does Oracle recommend connecting the drives Ethernet port to a dedicated service network? Mark for Review (1) Points To simplify network administration Privatenetworks have less traffic contention (*) To minimize security risk To increase switch sales Correct Correct 31. Using this Oracle System Handbook link - https://mosemp.us.oracle.com/ha ndbook_internal/Systems/SL150/components.html, what is true about the part numbe r 7057001? Mark for Review (1) Points It is a FRU for a HP LTO6 SAS Half Height Drive Tray It is an older part number for a HP LTO5 FC Half Height Drive Tray, 12V Fan It is a CRU for a 3Gb PCI-X SAS 8-Port Host Adapter It is a CRU for a HP LTO6 SAS Half Height Drive Tray (*) It is a CRU fr a 4GB Long Wave SFP Transceiver Correct Correct 32. You have an SL150 that took a 9006 fault code. Based on the FSC code listing at https://tapesupport.us.oracle.com/Products/FSC/Data/150_ fault.php, what three actions could you take? Mark for Review (1) Points Reseat power supply, reseat controller, replace motherboard Check ambient temperature, check the power supply fan, replace power sup ply (*) Reinsert power supply, reseat controller, replace motherboard Check power supply fan for obstruction, reseat drive, reseat motherboard Correct Correct 33. When interpreting a Fault Symptom Code for a customer, i t is a good practice to always share the Engineering text with them. True or Fal se? Mark for Review (1) Points True False (*) Incorrect Incorrect. Please refer to the Tape Automation Troublesh ooting and Repair course for more information. 34. Which section of the tape support web site (https://tape support.us.oracle.com)contains a list of the available tape library and drive to ols? Mark for Review (1) Points Tape Product Tools Reference (*) Code and Drivers FABs and Tech Tips Drive FSC Lookup Tool Troubleshooting Incorrect Incorrect. Please refer to the Tape Automation Troublesh ooting and Repair course for more information. 35. You have an SL150 that took a 9006 fault code. Based on the FSC code listing at https://tapesupport.us.oracle.com/Products/FSC/Data/150_ fault.php, what three actions could you take? Mark for Review (1) Points Check ambient temperature, check the power supply fan, replace power sup ply (*) Reseat power supply, reseat controller, replace motherboard Reinsert power supply, reseat controller, replace motherboard Check power supply fan for obstruction, reseat drive, reseat motherboard Correct Correct 36. In a library with LTO Cartridge Slots, the base unit has up to how many cartridge slots, assuming the upgrade conversion bill has been i nstalled, one or two tape drives, and a 5-slot cartridge access port (CAP). Mark for Review (1) Points 30 50 (*) 42 40 Incorrect Incorrect. Please refer to the SL500 Service and Support ourse for more information. 37. True or False: The expansion module installation differs greatly since the cartridge expansion module installation requires special tool s. Mark for Review (1) Points True False (*) Incorrect Incorrect. Please refer to the SL500 Service and Support ourse for more information. 38. During installation of the Robotics Unit, make sure the shipping straps are removed; failure to remove them will result in what kind of failure? Mark for Review (1) Points Initialization (*) Drive Communication Audit Mount Correct Correct 39. How does the library start an Initialization Sequence? Mark for Review (1) Points Initialization occurs when the library is powered-on or when the front d oor is opened and closed (*) Initialization only occurs when the front door is opened and closed Initialization occurs when the library is directed by the user using the backup software interfacing with the library Initialization requires a technical support Initialization Password purc hased by the customer Initialization occurs when the robot is fully seated Incorrect Incorrect. Please refer to the SL500 Service and Support ourse for more information. 40. What is required to activate the library? Mark fo r Review (1) Points Nothing, it ships fully activated The firmware installation A One-Time Activation Password (*) A card key Incorrect Incorrect. Please refer to the SL500 Service and Support ourse for more information. 41. Which of the following components make up the Robotics U nit? Mark for Review (1) Points X and Y drive and hand assemblies X and Y drive assemblies X, Y and Z drive assemblies X table, Z drive and Hand assemblies (*) Correct Correct 42. What type of information is stored on the RLC Card? Mark for Review (1) Points All security information Capacity information, VOLIDs and VOLANS VOLANS and security passwords Llibrary capacity information and VOLIDs (*) Correct Correct
Compartilhar