Exercicio ESAMC - Total Peças Xadrez , Media e Maior Valor vetor, Ler Vetor

Programação I

•
UNOESTE

2
0
2
0
Joao Andre MArtins Dias
28/05/2016
Esta é uma pré-visualização de arquivo. Entre para ver o arquivo original
PD/.dep.inc
# This code depends on make tool being used
DEPFILES=$(wildcard $(addsuffix .d, ${OBJECTFILES}))
ifneq (${DEPFILES},)
include ${DEPFILES}
endif
PD/Makefile
#
# There exist several targets which are by default empty and which can be 
# used for execution of your targets. These targets are usually executed 
# before and after some main targets. They are: 
#
# .build-pre: called before 'build' target
# .build-post: called after 'build' target
# .clean-pre: called before 'clean' target
# .clean-post: called after 'clean' target
# .clobber-pre: called before 'clobber' target
# .clobber-post: called after 'clobber' target
# .all-pre: called before 'all' target
# .all-post: called after 'all' target
# .help-pre: called before 'help' target
# .help-post: called after 'help' target
#
# Targets beginning with '.' are not intended to be called on their own.
#
# Main targets can be executed directly, and they are:
# 
# build build a specific configuration
# clean remove built files from a configuration
# clobber remove all built files
# all build all configurations
# help print help mesage
# 
# Targets .build-impl, .clean-impl, .clobber-impl, .all-impl, and
# .help-impl are implemented in nbproject/makefile-impl.mk.
#
# Available make variables:
#
# CND_BASEDIR base directory for relative paths
# CND_DISTDIR default top distribution directory (build artifacts)
# CND_BUILDDIR default top build directory (object files, ...)
# CONF name of current configuration
# CND_PLATFORM_${CONF} platform name (current configuration)
# CND_ARTIFACT_DIR_${CONF} directory of build artifact (current configuration)
# CND_ARTIFACT_NAME_${CONF} name of build artifact (current configuration)
# CND_ARTIFACT_PATH_${CONF} path to build artifact (current configuration)
# CND_PACKAGE_DIR_${CONF} directory of package (current configuration)
# CND_PACKAGE_NAME_${CONF} name of package (current configuration)
# CND_PACKAGE_PATH_${CONF} path to package (current configuration)
#
# NOCDDL
# Environment 
MKDIR=mkdir
CP=cp
CCADMIN=CCadmin
# build
build: .build-post
.build-pre:
# Add your pre 'build' code here...
.build-post: .build-impl
# Add your post 'build' code here...
# clean
clean: .clean-post
.clean-pre:
# Add your pre 'clean' code here...
.clean-post: .clean-impl
# Add your post 'clean' code here...
# clobber
clobber: .clobber-post
.clobber-pre:
# Add your pre 'clobber' code here...
.clobber-post: .clobber-impl
# Add your post 'clobber' code here...
# all
all: .all-post
.all-pre:
# Add your pre 'all' code here...
.all-post: .all-impl
# Add your post 'all' code here...
# build tests
build-tests: .build-tests-post
.build-tests-pre:
# Add your pre 'build-tests' code here...
.build-tests-post: .build-tests-impl
# Add your post 'build-tests' code here...
# run tests
test: .test-post
.test-pre: build-tests
# Add your pre 'test' code here...
.test-post: .test-impl
# Add your post 'test' code here...
# help
help: .help-post
.help-pre:
# Add your pre 'help' code here...
.help-post: .help-impl
# Add your post 'help' code here...
# include project implementation makefile
include nbproject/Makefile-impl.mk
# include project make variables
include nbproject/Makefile-variables.mk
PD/build/Debug/GNU-Linux-x86/main.o
PD/build/Debug/GNU-Linux-x86/main.o.d
build/Debug/GNU-Linux-x86/main.o: main.cpp
PD/dist/Debug/GNU-Linux-x86/pd
PD/main.cpp
/* 
 * File: main.cpp
 * Author: joao
 *
 * Created on 28 de Maio de 2016, 00:02
 */
#include <cstdlib>
#include<stdio.h>
#include<string.h>
#include<time.h>
using namespace std;
/*
 * 
 */
void bubbleSort(int vet[], int tl) {
 int i = 0, tl2 = tl - 1;
 int aux;
 while (tl2 > 0) {
 while (i + 1 < tl) {
 if (vet[i] > vet[i + 1]) {
 aux = vet[i];
 vet[i] = vet[i + 1];
 vet[i + 1] = aux;
 }
 i++;
 }
 i = 0;
 tl2--;
 }
}
//----------------------------------------
int maior(int vet[], int tl) {
 int maior = 0, cont = 0;
 while (cont < tl) {
 if (vet[cont] > maior)
 maior = vet[cont];
 cont++;
 }
 return maior;
}
//------------------------------------------------------------------------------
double media(int vet[], int tl) {
 int soma = 0, cont = 0;
 while (cont < tl) {
 soma += vet[cont++];
 }
 return soma / cont;
}
//------------------------------------------------------------------------------
void lerVetor(int vet[15]) {
 for (int i = 0; i < 15; i++) {
 printf("Digite o valor para pos[%d]\n", i);
 scanf("%d", &vet[i]);
 }
}
void carregaVetor(int vet[15]) {
 for (int i = 0; i < 15; i++) {
 vet[i] = rand() % 15;
 }
}
//------------------------------------------------------------------------------
void preencheTab(int vet[8][8]) {
 srand((unsigned) time(NULL));
 for (int i = 0; i < 8; i++) {
 for (int k = 0; k < 8; k++) {
 vet[i][k] = rand() % 7;
 }
 }
}
//------------------------------------------------------------------------------
int semPeca(int vet[8][8]) {
 int somaZero = 0;
 for (int i = 0; i < 8; i++) {
 for (int k = 0; k < 8; k++) {
 if (vet[i][k] == 0)
 somaZero++;
 }
 }
 return somaZero;
}
//------------------------------------------------------------------------------
int peaoOuBispo(int vet[8][8]) {
 int soma = 0;
 for (int i = 0; i < 8; i++) {
 for (int k = 0; k < 8; k++) {
 if (vet[i][k] == 1 || vet[i][k] == 4)
 soma++;
 }
 }
 return soma;
}
//------------------------------------------------------------------------------
int statusTab(int vet[8][8], int valor[6]) {
 for (int i = 0; i < 6; i++)
 valor[i] = 0;
 for (int i = 0; i < 8; i++) {
 for (int k = 0; k < 8; k++) {
 switch (vet[i][k]) {
 case 1:
 valor[0]++;
 break;
 case 2:
 valor[1]++;
 break;
 case 3:
 valor[2]++;
 break;
 case 4:
 valor[3]++;
 break;
 case 5:
 valor[4]++;
 break;
 case 6:
 valor[5]++;
 break;
 }
 }
 }
}
//------------------------------------------------------------------------------
void showTab(int vet[8][8]) {
 srand((unsigned) time(NULL));
 for (int i = 0; i < 8; i++) {
 printf("\n");
 for (int k = 0; k < 8; k++) {
 printf("[%d]", vet[i][k]);
 }
 }
}
//------------------------------------------------------------------------------
void exibe(int vet[], int tl) {
 printf("\n");
 for (int i = 0; i < tl; i++) {
 printf("%d-[%d], ", i, vet[i]);
 }
 printf("\n");
}
//----------------------------------------
int main(int argc, char** argv) {
 srand((unsigned) time(NULL));
 int Peoes = 0, Cavalos = 0, Torres = 0, Bispos = 0, Reis = 0, Rainhas = 0;
 int tl = 15, vetor[tl], xadrez[8][8], valorPecas[6];
 char strPecas[6][8];
 strcpy(strPecas[0], "Peoes");
 strcpy(strPecas[1],
"Cavalos");
 strcpy(strPecas[2], "Torres");
 strcpy(strPecas[3], "Bispos");
 strcpy(strPecas[4], "Reis");
 strcpy(strPecas[5], "Rainhas");
 
 lerVetor(vetor);
 exibe(vetor, tl);
 printf("Maior valor:[%d]\n", maior(vetor, tl));
 printf("Media dos valores:[%.2f]", media(vetor, tl));
 bubbleSort(vetor, tl);
 exibe(vetor, tl);
 preencheTab(xadrez);
 statusTab(xadrez, valorPecas);
 showTab(xadrez);
 printf("\nNumero de posicoes vazias:[%d]\n", semPeca(xadrez));
 printf("\nSoma de peoes ou bispos:[%d]\n", peaoOuBispo(xadrez));
 for (int i = 0; i < 6; i++) {
 printf("Numero de :<%s> , [%d]\n", strPecas[i], valorPecas[i]);
 }
 return 0;
}
PD/nbproject/Makefile-Debug.mk
#
# Generated Makefile - do not edit!
#
# Edit the Makefile in the project folder instead (../Makefile). Each target
# has a -pre and a -post target defined where you can add customized code.
#
# This makefile implements configuration specific macros and targets.
# Environment
MKDIR=mkdir
CP=cp
GREP=grep
NM=nm
CCADMIN=CCadmin
RANLIB=ranlib
CC=gcc
CCC=g++
CXX=g++
FC=gfortran
AS=as
# Macros
CND_PLATFORM=GNU-Linux-x86
CND_DLIB_EXT=so
CND_CONF=Debug
CND_DISTDIR=dist
CND_BUILDDIR=build
# Include project Makefile
include Makefile
# Object Directory
OBJECTDIR=${CND_BUILDDIR}/${CND_CONF}/${CND_PLATFORM}
# Object Files
OBJECTFILES= \
	${OBJECTDIR}/main.o
# C Compiler Flags
CFLAGS=
# CC Compiler Flags
CCFLAGS=
CXXFLAGS=
# Fortran Compiler Flags
FFLAGS=
# Assembler Flags
ASFLAGS=
# Link Libraries and Options
LDLIBSOPTIONS=
# Build Targets
.build-conf: ${BUILD_SUBPROJECTS}
	"${MAKE}" -f nbproject/Makefile-${CND_CONF}.mk ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/pd
${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/pd: ${OBJECTFILES}
	${MKDIR} -p ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}
	${LINK.cc} -o ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/pd ${OBJECTFILES} ${LDLIBSOPTIONS}
${OBJECTDIR}/main.o: main.cpp 
	${MKDIR} -p ${OBJECTDIR}
	${RM} "$@.d"
	$(COMPILE.cc) -g -MMD -MP -MF "$@.d" -o ${OBJECTDIR}/main.o main.cpp
# Subprojects
.build-subprojects:
# Clean Targets
.clean-conf: ${CLEAN_SUBPROJECTS}
	${RM} -r ${CND_BUILDDIR}/${CND_CONF}
	${RM} ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/pd
# Subprojects
.clean-subprojects:
# Enable dependency checking
.dep.inc: .depcheck-impl
include .dep.inc
PD/nbproject/Makefile-Release.mk
#
# Generated Makefile - do not edit!
#
# Edit the Makefile in the project folder instead (../Makefile). Each target
# has a -pre and a -post target defined where you can add customized code.
#
# This makefile implements configuration specific macros and targets.
# Environment
MKDIR=mkdir
CP=cp
GREP=grep
NM=nm
CCADMIN=CCadmin
RANLIB=ranlib
CC=gcc
CCC=g++
CXX=g++
FC=gfortran
AS=as
# Macros
CND_PLATFORM=GNU-Linux-x86
CND_DLIB_EXT=so
CND_CONF=Release
CND_DISTDIR=dist
CND_BUILDDIR=build
# Include project Makefile
include Makefile
# Object Directory
OBJECTDIR=${CND_BUILDDIR}/${CND_CONF}/${CND_PLATFORM}
# Object Files
OBJECTFILES= \
	${OBJECTDIR}/main.o
# C Compiler Flags
CFLAGS=
# CC Compiler Flags
CCFLAGS=
CXXFLAGS=
# Fortran Compiler Flags
FFLAGS=
# Assembler Flags
ASFLAGS=
# Link Libraries and Options
LDLIBSOPTIONS=
# Build Targets
.build-conf: ${BUILD_SUBPROJECTS}
	"${MAKE}" -f nbproject/Makefile-${CND_CONF}.mk ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/pd
${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/pd: ${OBJECTFILES}
	${MKDIR} -p ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}
	${LINK.cc} -o ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/pd ${OBJECTFILES} ${LDLIBSOPTIONS}
${OBJECTDIR}/main.o: main.cpp 
	${MKDIR} -p ${OBJECTDIR}
	${RM} "$@.d"
	$(COMPILE.cc) -O2 -MMD -MP -MF "$@.d" -o ${OBJECTDIR}/main.o main.cpp
# Subprojects
.build-subprojects:
# Clean Targets
.clean-conf: ${CLEAN_SUBPROJECTS}
	${RM} -r ${CND_BUILDDIR}/${CND_CONF}
	${RM} ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/pd
# Subprojects
.clean-subprojects:
# Enable dependency checking
.dep.inc: .depcheck-impl
include .dep.inc
PD/nbproject/Makefile-impl.mk
# 
# Generated Makefile - do not edit! 
# 
# Edit the Makefile in the project folder instead (../Makefile). Each target
# has a pre- and a post- target defined where you can add customization code.
#
# This makefile implements macros and targets common to all configurations.
#
# NOCDDL
# Building and Cleaning subprojects are done by default, but can be controlled with the SUB
# macro. If SUB=no, subprojects will not be built or cleaned. The following macro
# statements set BUILD_SUB-CONF and CLEAN_SUB-CONF to .build-reqprojects-conf
# and .clean-reqprojects-conf unless SUB has the value 'no'
SUB_no=NO
SUBPROJECTS=${SUB_${SUB}}
BUILD_SUBPROJECTS_=.build-subprojects
BUILD_SUBPROJECTS_NO=
BUILD_SUBPROJECTS=${BUILD_SUBPROJECTS_${SUBPROJECTS}}
CLEAN_SUBPROJECTS_=.clean-subprojects
CLEAN_SUBPROJECTS_NO=
CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}}
# Project Name
PROJECTNAME=PD
# Active Configuration
DEFAULTCONF=Debug
CONF=${DEFAULTCONF}
# All Configurations
ALLCONFS=Debug Release 
# build
.build-impl: .build-pre .validate-impl .depcheck-impl
	@#echo "=> Running $@... Configuration=$(CONF)"
	"${MAKE}" -f nbproject/Makefile-${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .build-conf
# clean
.clean-impl: .clean-pre .validate-impl .depcheck-impl
	@#echo "=> Running $@... Configuration=$(CONF)"
	"${MAKE}" -f nbproject/Makefile-${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .clean-conf
# clobber 
.clobber-impl: .clobber-pre .depcheck-impl
	@#echo "=> Running $@..."
	for CONF in ${ALLCONFS}; \
	do \
	 "${MAKE}" -f nbproject/Makefile-$${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .clean-conf; \
	done
# all 
.all-impl: .all-pre .depcheck-impl
	@#echo "=> Running $@..."
	for CONF in ${ALLCONFS}; \
	do \
	 "${MAKE}" -f nbproject/Makefile-$${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .build-conf; \
	done
# build tests
.build-tests-impl: .build-impl .build-tests-pre
	@#echo "=> Running $@... Configuration=$(CONF)"
	"${MAKE}" -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .build-tests-conf
# run tests
.test-impl: .build-tests-impl .test-pre
	@#echo "=> Running $@... Configuration=$(CONF)"
	"${MAKE}" -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .test-conf
# dependency checking support
.depcheck-impl:
	@echo "# This code depends on make tool being used" >.dep.inc
	@if [ -n "${MAKE_VERSION}" ]; then \
	 echo "DEPFILES=\$$(wildcard \$$(addsuffix .d, \$${OBJECTFILES}))" >>.dep.inc; \
	 echo "ifneq (\$${DEPFILES},)" >>.dep.inc; \
	 echo "include \$${DEPFILES}" >>.dep.inc; \
	 echo "endif" >>.dep.inc; \
	else \
	 echo ".KEEP_STATE:" >>.dep.inc; \
	 echo ".KEEP_STATE_FILE:.make.state.\$${CONF}" >>.dep.inc; \
	fi
# configuration validation
.validate-impl:
	@if [ ! -f nbproject/Makefile-${CONF}.mk ]; \
	then \
	 echo ""; \
	 echo "Error: can not find the makefile for configuration '${CONF}' in project ${PROJECTNAME}"; \
	 echo "See 'make help' for details."; \
	 echo "Current directory: " `pwd`; \
	 echo ""; \
	fi
	@if [ ! -f nbproject/Makefile-${CONF}.mk ]; \
	then \
	 exit 1; \
	fi
# help
.help-impl: .help-pre
	@echo "This makefile supports the following configurations:"
	@echo " ${ALLCONFS}"
	@echo ""
	@echo "and the following targets:"
	@echo " build (default target)"
	@echo " clean"
	@echo " clobber"
	@echo " all"
	@echo " help"
	@echo ""
	@echo "Makefile Usage:"
	@echo " make [CONF=<CONFIGURATION>] [SUB=no] build"
	@echo " make [CONF=<CONFIGURATION>] [SUB=no] clean"
	@echo " make [SUB=no] clobber"
	@echo " make [SUB=no] all"
	@echo " make help"
	@echo ""
	@echo "Target
'build' will build a specific configuration and, unless 'SUB=no',"
	@echo " also build subprojects."
	@echo "Target 'clean' will clean a specific configuration and, unless 'SUB=no',"
	@echo " also clean subprojects."
	@echo "Target 'clobber' will remove all built files from all configurations and,"
	@echo " unless 'SUB=no', also from subprojects."
	@echo "Target 'all' will will build all configurations and, unless 'SUB=no',"
	@echo " also build subprojects."
	@echo "Target 'help' prints this message."
	@echo ""
PD/nbproject/Makefile-variables.mk
#
# Generated - do not edit!
#
# NOCDDL
#
CND_BASEDIR=`pwd`
CND_BUILDDIR=build
CND_DISTDIR=dist
# Debug configuration
CND_PLATFORM_Debug=GNU-Linux-x86
CND_ARTIFACT_DIR_Debug=dist/Debug/GNU-Linux-x86
CND_ARTIFACT_NAME_Debug=pd
CND_ARTIFACT_PATH_Debug=dist/Debug/GNU-Linux-x86/pd
CND_PACKAGE_DIR_Debug=dist/Debug/GNU-Linux-x86/package
CND_PACKAGE_NAME_Debug=pd.tar
CND_PACKAGE_PATH_Debug=dist/Debug/GNU-Linux-x86/package/pd.tar
# Release configuration
CND_PLATFORM_Release=GNU-Linux-x86
CND_ARTIFACT_DIR_Release=dist/Release/GNU-Linux-x86
CND_ARTIFACT_NAME_Release=pd
CND_ARTIFACT_PATH_Release=dist/Release/GNU-Linux-x86/pd
CND_PACKAGE_DIR_Release=dist/Release/GNU-Linux-x86/package
CND_PACKAGE_NAME_Release=pd.tar
CND_PACKAGE_PATH_Release=dist/Release/GNU-Linux-x86/package/pd.tar
#
# include compiler specific variables
#
# dmake command
ROOT:sh = test -f nbproject/private/Makefile-variables.mk || \
	(mkdir -p nbproject/private && touch nbproject/private/Makefile-variables.mk)
#
# gmake command
.PHONY: $(shell test -f nbproject/private/Makefile-variables.mk || (mkdir -p nbproject/private && touch nbproject/private/Makefile-variables.mk))
#
include nbproject/private/Makefile-variables.mk
PD/nbproject/Package-Debug.bash
#!/bin/bash -x
#
# Generated - do not edit!
#
# Macros
TOP=`pwd`
CND_PLATFORM=GNU-Linux-x86
CND_CONF=Debug
CND_DISTDIR=dist
CND_BUILDDIR=build
CND_DLIB_EXT=so
NBTMPDIR=${CND_BUILDDIR}/${CND_CONF}/${CND_PLATFORM}/tmp-packaging
TMPDIRNAME=tmp-packaging
OUTPUT_PATH=${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/pd
OUTPUT_BASENAME=pd
PACKAGE_TOP_DIR=pd/
# Functions
function checkReturnCode
{
 rc=$?
 if [ $rc != 0 ]
 then
 exit $rc
 fi
}
function makeDirectory
# $1 directory path
# $2 permission (optional)
{
 mkdir -p "$1"
 checkReturnCode
 if [ "$2" != "" ]
 then
 chmod $2 "$1"
 checkReturnCode
 fi
}
function copyFileToTmpDir
# $1 from-file path
# $2 to-file path
# $3 permission
{
 cp "$1" "$2"
 checkReturnCode
 if [ "$3" != "" ]
 then
 chmod $3 "$2"
 checkReturnCode
 fi
}
# Setup
cd "${TOP}"
mkdir -p ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package
rm -rf ${NBTMPDIR}
mkdir -p ${NBTMPDIR}
# Copy files and create directories and links
cd "${TOP}"
makeDirectory "${NBTMPDIR}/pd/bin"
copyFileToTmpDir "${OUTPUT_PATH}" "${NBTMPDIR}/${PACKAGE_TOP_DIR}bin/${OUTPUT_BASENAME}" 0755
# Generate tar file
cd "${TOP}"
rm -f ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package/pd.tar
cd ${NBTMPDIR}
tar -vcf ../../../../${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package/pd.tar *
checkReturnCode
# Cleanup
cd "${TOP}"
rm -rf ${NBTMPDIR}
PD/nbproject/Package-Release.bash
#!/bin/bash -x
#
# Generated - do not edit!
#
# Macros
TOP=`pwd`
CND_PLATFORM=GNU-Linux-x86
CND_CONF=Release
CND_DISTDIR=dist
CND_BUILDDIR=build
CND_DLIB_EXT=so
NBTMPDIR=${CND_BUILDDIR}/${CND_CONF}/${CND_PLATFORM}/tmp-packaging
TMPDIRNAME=tmp-packaging
OUTPUT_PATH=${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/pd
OUTPUT_BASENAME=pd
PACKAGE_TOP_DIR=pd/
# Functions
function checkReturnCode
{
 rc=$?
 if [ $rc != 0 ]
 then
 exit $rc
 fi
}
function makeDirectory
# $1 directory path
# $2 permission (optional)
{
 mkdir -p "$1"
 checkReturnCode
 if [ "$2" != "" ]
 then
 chmod $2 "$1"
 checkReturnCode
 fi
}
function copyFileToTmpDir
# $1 from-file path
# $2 to-file path
# $3 permission
{
 cp "$1" "$2"
 checkReturnCode
 if [ "$3" != "" ]
 then
 chmod $3 "$2"
 checkReturnCode
 fi
}
# Setup
cd "${TOP}"
mkdir -p ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package
rm -rf ${NBTMPDIR}
mkdir -p ${NBTMPDIR}
# Copy files and create directories and links
cd "${TOP}"
makeDirectory "${NBTMPDIR}/pd/bin"
copyFileToTmpDir "${OUTPUT_PATH}" "${NBTMPDIR}/${PACKAGE_TOP_DIR}bin/${OUTPUT_BASENAME}" 0755
# Generate tar file
cd "${TOP}"
rm -f ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package/pd.tar
cd ${NBTMPDIR}
tar -vcf ../../../../${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package/pd.tar *
checkReturnCode
# Cleanup
cd "${TOP}"
rm -rf ${NBTMPDIR}
PD/nbproject/configurations.xml
 
 
 
 
 
 main.cpp
 
 
 
 
 
 
 Makefile
 
 
 Makefile
 
 
 
 default
 true
 false
 
 
 
 
 
 
 
 
 default
 true
 false
 
 
 
 5
 
 
 5
 
 
 5
 
 
 5
 
 
 
 
 
 
PD/nbproject/private/Makefile-variables.mk
#
# Generated - do not edit!
#
# NOCDDL
#
# Debug configuration
# Release configuration
PD/nbproject/private/configurations.xml
 
 Makefile
 
 
 
 localhost
 2
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 gdb
 
 
 
 "${OUTPUT_PATH}"
 
 "${OUTPUT_PATH}"
 
 true
 0
 0
 
 
 
 
 
 
 localhost
 2
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 gdb
 
 
 
 "${OUTPUT_PATH}"
 
 "${OUTPUT_PATH}"
 
 true
 0
 0
 
 
 
 
 
PD/nbproject/private/launcher.properties
# Launchers File syntax:
#
# [Must-have property line] 
# launcher1.runCommand=<Run Command>
# [Optional extra properties] 
# launcher1.displayName=<Display Name, runCommand by default>
# launcher1.buildCommand=<Build Command, Build Command specified in project properties by default>
# launcher1.runDir=<Run Directory, ${PROJECT_DIR} by default>
# launcher1.symbolFiles=<Symbol Files loaded by debugger, ${OUTPUT_PATH} by default>
# launcher1.env.<Environment variable KEY>=<Environment variable VALUE>
# (If this value is quoted with ` it is handled as a native command which execution result will become the value)
# [Common launcher properties]
# common.runDir=<Run Directory>
# (This value is overwritten by a launcher specific runDir value if the latter exists)
# common.env.<Environment variable KEY>=<Environment variable VALUE>
# (Environment variables from common launcher are merged with launcher specific variables)
# common.symbolFiles=<Symbol Files loaded by debugger>
# (This value is overwritten by a launcher specific symbolFiles value if the latter exists)
#
# In runDir, symbolFiles and env fields you can use these macroses:
# ${PROJECT_DIR} - project directory absolute path
# ${OUTPUT_PATH} - linker output path (relative to project directory path)
# ${OUTPUT_BASENAME}- linker output filename
# ${TESTDIR} - test files directory (relative to project directory path)
# ${OBJECTDIR} - object files directory (relative to project directory path)
# ${CND_DISTDIR} - distribution directory (relative to project
directory path)
# ${CND_BUILDDIR} - build directory (relative to project directory path)
# ${CND_PLATFORM} - platform name
# ${CND_CONF} - configuration name
# ${CND_DLIB_EXT} - dynamic library extension
#
# All the project launchers must be listed in the file!
#
# launcher1.runCommand=...
# launcher2.runCommand=...
# ...
# common.runDir=...
# common.env.KEY=VALUE
# launcher1.runCommand=<type your run command here>
PD/nbproject/private/private.xml
 
 
 1
 0
 
PD/nbproject/project.xml
 
 org.netbeans.modules.cnd.makeproject
 
 
 PD
 
 cpp
 
 UTF-8
 
 
 
 
 Debug
 1
 
 
 Release
 1
 
 
 
 false