BACK UP E RESTORE CF e

Esta é uma pré-visualização de arquivo. Entre para ver o arquivo original

SITRAIN NC-84SL-EXP / Exercises - Commissioning 840D sl	Slide *
Automation and Drives
01/2006 © Siemens AG 2006 - Subject to change without prior notice
Checking the CF Card
Titel der Präsentation
SITRAIN NC-84SL-EXP / Exercises - Commissioning 840D sl	Slide *
Automation and Drives
01/2006 © Siemens AG 2006 - Subject to change without prior notice
Backing up the CF Card
Titel der Präsentation
SITRAIN NC-84SL-EXP / Exercises - Commissioning 840D sl	Slide *
Automation and Drives
01/2006 © Siemens AG 2006 - Subject to change without prior notice
Restoring the CF Card
Titel der Präsentation
SITRAIN NC-84SL-EXP / Exercises - Commissioning 840D sl	Slide *
Automation and Drives
01/2006 © Siemens AG 2006 - Subject to change without prior notice
Saving the Update on USB Stick during Operation
Titel der Präsentation
Application	This application checks whether the system CF Card is properly functioning. You can, for example, perform a differential diagnosis checking whether the Card or NC is defective.
Command	Name of the command: "sc check-cf“. Please note: No blanks are allowed between "check“ and "-cf“
Application	After having completed the commissioning procedure, you should save the contents of the card.
	You can either remove the card from the controller and perform a backup on the PG via Installdisk or using this Service Command (we recommend that you use this method). 
How to proceed	1. Boot the NCU from boot-capable stick (linuxbase-512M.img)
	2. login with WinSCP as "admin“, PW "SUNRISE“ (see WinSCP description)
	3. Service command "sc backup /data/{filename}.tgz
	 This initiates the backup, the backup file is stored on the stick in the root directory under the {filename}.tgz indicated.
Notice	After the message "done“, it takes approx. 1 min until the data have been stored on the stick.	
Application	This application is used to rewrite a CF Card including the license key, the user directory and the boot files. 
How to proceed	1. Boot the NCU from boot-capable stick (linuxbase-512M.img). The map file must be located on the stick.
	2. login with WinSCP as "admin“, PW "SUNRISE“ (see WinSCP description)
	3. Service command "sc restore -full /data/{filename}.tgz
	 The "-full“ option allows to format the target card as well. 
	
Notice	Linux is case-sensitive.
Application	Create an image during operation. In this example, this requires an USB stick with a FAT-formatted partition, e.g. after using installdisk with linux.img. 
How to proceed	1. Insert USB stick in NCU (X125/X135)
	2. Start WinSCP
	3. Open a console
	4. Change to the root via cd / (insert a blank between cd and /)
	5. Create a new directory, in this case stick with mkdir /stick 
	6. Mount (connect) the directory with mount –t vfat /dev/sda1 /stick
	7. Save data with sc backup –force /stick/datei.tgz or via any other action with target or source /stick
	8. Log off USB stick via umount /stick 
	 This step is very important !
	9. Remove the directory /stick with rmdir /stick
	
Notice	Linux is case-sensitive.
	Please correctly position the blanks !