GL5555 Version Notes Sep 14

Prévia do material em texto

Training Courses 
 
 
 
 
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved GL5555 Sep 2014 
 
 
GL5555 Self Paced Training Webcast 
version notes: 
 
 
Course Version: September 2014 
Note: Its VERY Important you read through these – before continuing with your course, 
especially the Lesson 25 Note. 
 
Explanation: 
These Webcast version notes are made available to ensure that feedback or changes can be 
immediately provided in support of the Webcast. The Webcast will be updated at regular 
intervals and version actions will have been included in the new cast. 
 
Important Note: There are four assessments for this course and each of them cover a group 
of lessons. 
Assessment One:- Lessons 1 to 6. Assessment Two:- Lessons 7 to 10. 
Assessment Three:- Lessons 11 to 17. Assessment Four:- Lessons 18 to 25. 
 
Lesson 0: 
No additional comments 
 
Lesson 1: 
No additional comments 
 
Lesson 2: 
No additional comments 
 
Lesson 3: 
The download “ImVision User Guide” has been updated on-line from Oct 1st 2013 due to an 
erroneous graphic error indicating that the maximum number of racks was 99 when it is actually 
50. The corrected download version of this document has an ‘a’ after the original file date in the 
title. 
 
Lesson 4: 
The download “ImVision Controller Installation Instructions” has been updated on-line from Oct 
1st 2013 due to an erroneous graphic error indicating that the maximum number of racks was 
99 when it is actually 50. The corrected download version of this document has an ‘a’ after the 
original file date in the title. 
 
Lesson 5: 
No additional comments 
 
Lesson 6: 
No additional comments 
 
Lesson 7: 
No additional comments 
 
Lesson 8: 
No additional comments 
 
Lesson 9: 
No additional comments 
Training Courses 
 
 
 
 
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved GL5555 Sep 2014 
 
 
 
Lesson 10: 
No additional comments 
 
Lesson 11: 
On Slide 5 a red box is supposed to highlight ‘Generic Panel’ but in fact it highlights ‘Blade 
Enclosure’. This animation will be corrected in the next update. 
 
Lesson 12: 
No additional comments 
 
Lesson 13: 
No additional comments 
 
Lesson 14: 
No additional comments 
 
Lesson 15: 
No additional comments 
 
Lesson 16: 
No additional comments 
 
Lesson 17: 
No additional comments 
 
Lesson 18: 
No additional comments 
 
Lesson 19: 
No additional comments 
 
Lesson 20: 
No additional comments 
 
Lesson 21: 
No additional comments 
 
Lesson 22: 
No additional comments 
 
Lesson 23: 
No additional comments 
 
Lesson 24: 
No additional comments 
 
Lesson 25: 
NOTE: Its VERY IMPORTANT that you complete your Workshop and upload it through your 
assessment area NOW before continuing with Lesson 26 otherwise it could become over 
written. 
 
Lesson 26 is from GL5555R1 Lesson 1 - iPatch Hardware Update 
Training Courses 
 
 
 
 
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved GL5555 Sep 2014 
 
 
Make sure you have submitted your L1 to L25 workshops through the assessment system 
before proceeding with this lesson. 
 
Lesson 26 is GL5555R1 Lesson 2 - iPatch Hardware Installation Update: 
No additional comments 
 
Lesson 28 is GL5555R1 Lesson 3 - imVision SMv7.1 Software Update 
The workshops for L26 and L28 DO NOT need to be submitted through the assessment area 
and do not form part of the assessment. 
 
 
Other: 
 
 
 
Training Courses 
 
 
 
 
Copyright 2014 CommScope, Inc. & Cabling Science Ltd. All rights reserved GL5555 Sep 2014 
 
 
 
 
 
INTELLECTUAL PROPERTY and DISCLAIMERS 
 
 
NOTICE FOR PUBLICATIONS: 
 
Intellectual Property: 
 
COPYRIGHT© 2014 CommScope, Inc. ALL RIGHTS RESERVED 
COPYRIGHT© 2014 Cabling Science Ltd ALL RIGHTS RESERVED 
 
This material is protected by National and International copyright laws. No part of this material may be 
reproduced, distributed, stored in a retrieval system, transmitted or altered in any fashion by an entity, 
including other (CommScope, Inc. or Cabling Science Ltd. Business units or divisions), without the 
express written consent of the copyright holders, application of which should be addressed to [Both 
Cabling Science Ltd.] and [Commscope, Inc.] at the address [below]. 
 
DISCLAIMERS: 
 
Disclaimer: The course material is for education only and is not intended to modify or supplement any 
specifications or warranties relating to CommScope Solutions products or services. CommScope or 
Cabling Science Ltd. makes no representations or warranties with respect to the contents of the course 
material, and specifically disclaims any implied warranties of merchantability or fitness for any particular 
purpose. The contents provide engineering training for educational, planning and estimating purposes, 
and are given AS IS. CommScope and Cabling Science ltd. will in no event be liable for direct, indirect, 
incidental, or consequential damages resulting from any defect, error, or failure to perform. 
 
Developed for CommScope, Inc. by Cabling Science Ltd. 
 
Cabling Science Ltd. 13 Northern Way, Crewkerne, Somerset TA18 7HJ 
Registered in England No. 3453396 44 (0) 1460 279927