Instruções de Instalação do Autodesk PowerMill 2018 Ultimate

Esta é uma pré-visualização de arquivo. Entre para ver o arquivo original

0.Unzip/Unrar Start sfx installer and wait for the installation to start
 or mount ISO
1.Install Autodesk PowerMill 2018 Ultimate
2.Use as Serial 666-69696969, 667-98989898, 400-45454545 066-66666666 .. 
 or anything matching those templates
3.Use as Product Key A9PJ1
4.Finish the installation & restart Autodesk Product
 Choose Enter a Serial
ACTIVATION : We suggest blocking outgoing traffic (faster and easier to activate)
5.Before clicking on Activate
 You have 2 options :
 - a) Disable Your network Card, pull the network cable out or block with firewall
 (this is just to disable online checks) it will tell you that an internet Connection is Required
 simply click on close and click on activate again
 
OR 
 - b) Click on Activate and it will do an online check, simply click
 on close and click on activate again.
Choose option a or b.
6. Select I have an activation code from Autodesk
 
7.Once at the activation screen: 
 start XFORCE Keygen 32bits version or 64bits version
 
8.Click on Mem Patch (you should see successfully patched)
9.Copy the request code into the keygen and press generate
10.Now copy the activation code back to the activation screen and click Next
 You have a fully registered autodesk product
 
 You may get this message while your outgoing traffic is blocked, or you are off internet
 Your online activation request has returned an error (800c0005) which is not allowing your request to be processed using our automated systems.
 just Click Close
NB: Make sure you are running the Keygen as administrator from your HDD and with UAC off on Windows 7/8/10