Updated Dumps for D-PDC-DY-23 Dell PowerSwitch Data Center Deploy 2023 Exam

Text Material Preview

D-PDC-DY-23 Dell PowerSwitch Data Center Deploy 2023 exam dumps
questions are the best material for you to test all the related DELL EMC exam
topics. By using the D-PDC-DY-23 exam dumps questions and practicing your
skills, you can increase your confidence and chances of passing the D-PDC-
DY-23 exam.
Features of Dumpsinfo’s products
Instant Download
Free Update in 3 Months
Money back guarantee
PDF and Software
24/7 Customer Support
Besides, Dumpsinfo also provides unlimited access. You can get all
Dumpsinfo files at lowest price.
Dell PowerSwitch Data Center Deploy 2023 D-PDC-DY-23 exam free dumps
questions are available below for you to study. 
Full version: D-PDC-DY-23 Exam Dumps Questions
1.Which command mode allows configuration of switches L2 and L3 interfaces?
A. EXEC Mode
B. Interface
C. Configuration
D. Global
Answer: B
2.What is a valid RADIUS Authentication command?
A. OS10(config)# radius-server timeout never
B. OS10(config)# radius-server timeout 1500
C. OS10(config)# radius-server retransmit 10
 1 / 8
https://www.dumpsinfo.com/unlimited-access/
https://www.dumpsinfo.com/exam/d-pdc-dy-23
D. OS10(config)# radius-server retransmit 150
Answer: C
3.There is a spanning tree mismatch at the global level. PVST+ is configured on a VLT peer. All VLT
port channels go down on both VLT peers. A syslog error message is generated.
What is the correct action to resolve the issue?
A. Verify the VLT LAG ID is configured correctly on both VLT peers.
B. Enable RSTP on both VLT peers.
C. Use the show VLT detail and show VLT brief commands to view the VLT port channel status
information.
D. Perform a mismatch check after the VLT peer is established.
Answer: B
4. What is a feature of virtual routing and forwarding?
A. Allows multiple user groups to co-exist within the same router.
B. Allows for routing redundancy of virtual machine traffic.
C. Allows different switches to operate in a single VRF group.
D. Allows multiple instances of routing tables to co-exist with in the same router.
Answer: D
5.In a Layer 3 Leaf-Spine topology what can be used to move Layer 2 traffic between racks?
A. VXLAN
B. Trunks
C. Port channel
D. VLT
Answer: A
6. A network administrator is required to group the three upper COS values. The administrator
creates a trust map named dot1p-trust-map.
Which command groups the required packets in this trust map?
A. OS10 (config-tmap-dscp-map) # qos-group 5 dot1p 16-30
B. OS10 (config-tmap-dscp-map) # qos-group 5 dot1p 5-7
C. OS10 (config-tmag-dot1p-map) # qos-group 5 dot1p 5-7
D. OS10 (config-tmap-dot1p-map) # qos-group 3 dot1p 0-4
Answer: B
7.In a VRRP configured environment without VLT, how does the backup VRRP peer respond to ARP
requests?
A. Sends an ICMP redirect message
B. Responds to ARP requests with the MAC address of the master peer's IP
C. Does not respond to ARP requests
D. Responds to ARP requests with the MAC address of the virtual IP address
Answer: C
8. Refer to the exhibit:
 2 / 8
https://www.dumpsinfo.com/
A default route exists on OS10-C that points all Internet traffic towards 10.0.13.3 on OS10-B. A
network administrator must re-route Internet traffic that is only sourced from Host-1 to 10.0.12.2 on
OS10-A instead.
What feature can the administrator implement to accomplish this goal?
A. Source-Based Routing
B. OSPF Cost Manipulation
C. Policy-Based Routing
Answer: B
9. According to Dell best practices, what is the recommended role for Z-Series switches?
A. Leaf switches
B. Top-of-Rack switches
C. Spins switches
D. Access switches
Answer: B
10.How are ACLs processed?
A. LIFO
B. FIFO
C. Randomly
D. Sequentially
Answer: D
11.Which multicast address is used by all OSPF routers?
A. 239.0.0.4
B. 239.0.0.6
 3 / 8
https://www.dumpsinfo.com/
C. 224.0.0.5
D. 224.0.0.6
Answer: C
12.On what does PBR base routing decisions?
A. Dijkstra Algorithm
B. Batch traffic
C. Administrator-defined forwarding
D. Shortest path
Answer: C
13.Which command shows whether a LAG protocol is static or dynamic on a Dell EMC Networking
OS10 switch?
A. show lacp neighbor
B. show running-configuration lacp
C. show interface port-channel summary
D. show port-channel summary
Answer: D
14.When creating an alias in OS10 what is the maximum number of variable input parameters that
can be defined?
A. 6
B. 9
C. 3
D. 12
Answer: B
15.When using Policy Based Routing what is a valid matching criterion?
A. 802.1Q VLAN ID
B. Destination TCP port number
C. AAA security credentials
D. Source hostname
Answer: D
16.Which LSA types are used in a single area OSPF topology?
A. 4, 5 and 7
B. 1 and 7
C. 1, 2 and 5
D. 2, 3 and 5
Answer: C
17. Which field in an IP header is used for QoS marking?
A. Options Header
B. ToS
C. CoS
Answer: B
 4 / 8
https://www.dumpsinfo.com/
18.What must be done before configuring any routing protocol in a VRF instance?
A. Assign an IP address to at least one of the interfaces assigned to the VRF instance
B. Create a routing group for each VRF instance
C. Assign each VRF instance to a routing group
D. Nothing, VRF routing protocols are assigned automatically
Answer: A
19.Which configuration supports tagged frames on VLAN 20 and untagged frames on VLAN 5?
A. interface ethernet 1/1/9 switchport trunk mode allowed vlan 20 switchport access mode vlan 5 no
shutdown
B. interface ethernet 1/1/9 switchport trunk allowed vlan 20 switchport access vlan 5 switchport mode
trunk
C. interface ethernet 1/1/9 switchport trunk mode allowed vlan 20 switchport access vlan 5 no
shutdown
D. interface ethernet 1/1/9 switchport mode trunk switchport trunk allowed vlan 20 switchport access
vlan 5
Answer: D
20. Which statement about the VRRP secondary role is true?
A. Load balances traffic with the VRRP primary.
B. Responds lo ARP requests for the virtual router.
C. Receives packets with the virtual MAC address as the destination.
D. Forwards packets to the primary destined for the virtual IP address.
Answer: C
21.What are mandatory LLDPDU TLV's?
A. 0123
B. 0124
C. 0456
D. 1234
Answer: A
22.Refer to the exhibit:
 5 / 8
https://www.dumpsinfo.com/
From S1, a ping to the host address of 192.168.37.3 is not successful. The routing table on S1 shows
three directly connected networks (including the Lo0 network of S1). Network 192.168.34.0/24 and
the Lo0 networks of S2 and S3 are the only OSPF-learned networks in the routing table. The system
on the 192.168.37.0/24 network can ping S3.
Which command offers a solution to the inability to ping the host address from S1?
A. S1(config-router-ospf-1)# ip route 192.168.37.0/24 interface null 0
B. S3(config-router-ospf-1)# update-source loopback 0
C. S3(config-router-ospf-1)# redistribute connected
 6 / 8
https://www.dumpsinfo.com/
D. S1(config-router-ospf-1)# network 192.168.37.0/24
Answer: C
23.Three switches are inter-connected via trunk ports. Assuming the default OS10 switch
configuration.
Which switch is elected as the root bridge for the spanning-tree instance of VLAN 1?
A. The one with the lowest MAC address
B. The one with the lowest IP address
C. The one with the highest MAC address
D. The one with the highest IP address
Answer: A
24.Using the MAC 8c-ec-4b-5b-61-9d, what is a valid EUI-64 link local address?
A. 2001::a9:8eec:4bff:fc5b:619d
B. fe80::a9:8cec:4bff:fe5b:619d
C. ff80:a9:8eec:4bff:fe5b:619d
D. fe80::a9:8eec:4bff:fe5b:619d
Answer: D
25.A network administrator must configure a virtual IP address using VRRP on interface VLAN 100
within OS10.
What are the correct steps to accomplish this?
A. OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip address 10.0.100.1/24
OS10(conf-if-vl-100)# standby-group 256
OS10(conf-vlan100-vrid-256)# standby-address 10.0.100.2
B. OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip address 10.0.100.2/24
OS10(conf-if-vl-100)# standby-group 250
OS10(conf-vlan100-vrid-250)# virtual-address 10.0.100.1
C.OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip address 10.0.100.2/24
OS10(conf-if-vl-100)# vrrp-group 256
OS10(conf-vlan100-vrid-256)# virtual-address 10.0.100.1
D. OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# ip address 10.0.100.1/24
OS10(conf-if-vl-100)# vrrp-group 250
OS10(conf-vlan100-vrid-250)# virtual-address 10.0.100.2
Answer: D
26.Which switch mode is used to manage files and display switch information?
A. Interface
B. Network
C. Exec
D. Configuration
Answer: C
 7 / 8
https://www.dumpsinfo.com/
27. What is the security impact of enabling LLDP?
A. Switch information is advertised.
B. Broadcasts toms are possible.
C. Login over telnet is permitted.
D. SNMP data is broadcasted on all ports
Answer: A
28.The network administrator wants to configure RADIUS authentication for VTY access, and for
console access to use the local configuration.
Which two commands should be used to achieve this goal?
A. aaa authentication login vty group radius aaa authentication login console local
B. aaa authentication login default group radius aaa authentication login console local
C. aaa authentication login vty radiusaaa authentication login console group local
D. aaa authentication login default group radius aaa authentication login console group local
Answer: B
29.What is required to enable ECMP in BGP?
A. OSPF must install equal cost paths in the routing table for BGP use ECMP.
B. Maximum-paths and multipath-relax commands.
C. Sub-interfaces must be configured on the physical interface running BGP.
D. ECMP is not possible in BGP.
Answer: B
30.In an NSSA, which type of LSA is used for redistribution?
A. 3
B. 4
C. 5
D. 7
Answer: D
31.Multicast flood restrict is a feature enabled by default on OS10 switches to ensure that no traffic
drop occurs.
What is a recommended configuration step for its implementation?
A. Configure the interface between the PIM routers as a dynamic multicast router port
B. Enable IGMP snooping on the VLAN interfaces between two PIM routers with no IGMP receivers
C. Disable IGMP snooping on the VLAN between two PIM routers with no IGMP receivers on that
VLAN
D. Configure the interface between the PIM routers and the rendezvous point as a static multicast
router port
Answer: C
Powered by TCPDF (www.tcpdf.org)
 8 / 8
https://www.dumpsinfo.com/
http://www.tcpdf.org