An engineer must connect a Cisco UCS B-Series based system to an existing large storage area network fabric. The deployment must support hardware-b...

An engineer must connect a Cisco UCS B-Series based system to an existing large storage area network fabric. The deployment must support hardware-based load balancing, prevent Fibre Channel domain ID exhaustion, and enable all blade servers to be in the same VSAN. Which set of actions meets the requirements?

A. Configure the UCS to use a single Fibre Channel uplink to the existing fabric. Configure the uplink to use a port channel with the existing fabric switch.
B. Configure the UCS to use two Fibre Channel uplinks to the existing fabric. Configure the uplinks to use a port channel with the existing fabric switch.
C. Configure the UCS to use two Fibre Channel uplinks to the existing fabric. Configure the uplinks to use separate VSANs with the existing fabric switch.
D. Configure the UCS to use a single Fibre Channel uplink to the existing fabric. Configure the uplink to use a separate VSAN with the existing fabric switch.

Ensino Médio

•

Colégio Objetivo

0

1

Estudando com Questões

15/06/2023

Essa pergunta também está no material:

14 pág.

300-610 Designing Cisco Data Center Infrastructure (DCID) Updated Material

Ensino Médio • LaSalle TechLaSalle Tech

Zabrocki Archie

💡 1 Resposta

Ed

15.06.2023

A resposta correta é a opção B. Configurar o UCS para usar dois uplinks de Fibre Channel para o tecido existente e configurar os uplinks para usar um port channel com o switch de tecido existente. Isso permitirá o balanceamento de carga baseado em hardware, evitará a exaustão do ID do domínio Fibre Channel e permitirá que todos os servidores blade estejam no mesmo VSAN.

0