The correct answer is option d) Steps 1, 2, 3, 4, and 5. Before applying paint, the surface to be painted must be completely clean and dry. For latex paint, apply a base coat to homogenize the entire surface, followed by 2 or 3 coats of the chosen latex paint, allowing each coat to dry well before applying the next one. For special paints, such as epoxy, synthetic enamels, satin paints, etc., the entire surface to be painted must be pasted with ROMERAL® putty before receiving the selected paint. If the surface to be painted will be exposed to critical illuminations, it is recommended to apply a paste over the entire surface to homogenize the base and paint absorption. It is not recommended to sand the surface if the putty was applied correctly. If sanding is necessary, use a very fine sandpaper or a slightly damp sponge.
Para escrever sua resposta aqui, entre ou crie uma conta
Compartilhar