Realize the drawing of a wrench according to the instructions given, including the use of specific scales and geometric problems. The evaluation wi...

Realize the drawing of a wrench according to the instructions given, including the use of specific scales and geometric problems. The evaluation will consider aspects such as organization, technical lettering, line quality, and accuracy of the final piece.
Use a 2H pencil to start the drawing.
Draw two vertical axis lines separated by the indicated distance, considering a 2:1 scale.
Draw the circle of the wrench with the indicated diameter.
Draw the axis line located 70mm from the second axis line, considering a 2:1 scale.
Draw the parallel lines that make up the wrench handle, calculating the separation distances to match the drawing.
Close the wrench handle using semicircles.
Connect the wrench handle to the central circle using geometric problem number 16.
Draw the hexagon inside the central circle with a diameter of 35mm, using geometric problem number 9.
Outline the wrench with an HB pencil to make it stand out from the other lines.
Include technical lettering for the measurements and reference box.
Evaluation criteria: organization, technical lettering, line quality, use of geometric problems, and accuracy of the final piece.