Manual de Instalação de Leitores de Proximidade Wiegand

Prévia do material em texto

www.cdvgroup.com
All the specifications on this document (photos, drawing, features and dimensions) could be changed without prior notice.
Printed in Canada - Ref: CDVI_DGLP_DGLI_Readers_IE
Manufacturing Access Control since 1985
CDVI (Headquarters/Siège social)
FRANCE
Tel: +33 (0)1 48 91 01 02
Fax: +33 (0)1 48 91 21 21
CDV AMERICAS
CANADA
Tel: +1 (450) 682 7945
Fax: +1 (450) 682 9590
 
CDV BENELUX
BELGIUM
Tel: +32 (0)5 662 02 50
Fax: +32 (0)5 662 02 55
CDV CH
SWITZERLAND
Tel: +41 (0)21 882 18 41
Fax : +41 (0)21 882 18 42
CDV CHINA
CHINA 
Tel: +86 (0)10 87664065
Fax: +86 (0)10 87664165
CDV IBÉRICA
SPAIN
Tel: +34 936 916 551
Fax: +34 935 801 278
 
CDV ITALIA
ITALIA
Tel: +39 0331 97 38 08 
Fax: +39 0331 97 39 70
CDV MAROC
MOROCCO
Tel : +212 (0)22 48 09 40
Fax : +212 (0)22 48 34 69
CDV SWEDEN
SWEDEN
Tel: +46 (0)33 20 55 50
Fax: +46 (0)33 20 55 51
CDV UK Ltd
UNITED KINGDOM
Tel: +44 (0)1628 531300 
Fax : +44 (0)1628 531003 
DIGIT
FRANCE
Tel : +33 (0)1 41 71 06 85
Fax : +33 (0)1 41 71 06 86
LA GACHE ELECTRIQUE
FRANCE
Tel: +33 (0)3 88 77 32 82 
Fax: +33 (0)3 88 77 85 02
PROCOFI
FRANCE
Tel: +33 (0)1 41 83 04 90
Fax: +33 (0)1 41 83 04 91
TECHNO EM
FRANCE
Tel: +33 (0)4 42 96 58 73 
Fax: +33 (0)4 42 96 45 77
INSTALLATION MANUAL
Indoor/Outdoor
Wiegand Proximity Readers
DGLP WLC DGLP FN WLC DGLI WLC DGLI F WLC
w w w. c d v g r o u p . c o m
Installation Manual
w w w. c d v g r o u p . c o m
Wiegand Proximity Readers
98 mm (3.9")
77
 m
m
 (
3"
)
19,5 mm 
(.75")
14
0 
m
m
 (
5.
5"
)
35 mm 
(1.4")
21,5 mm 
(.8")
104 mm (4.1")
8
0
.5
 m
m
 (
3
.5
")
23 mm 
(.9")
1
4
0
 m
m
 (
5
.5
")
42 mm 
(1.7")
23 mm 
(.9")
PRODUCT OVERVIEW:
The DGLP WLC and DGLI WLC are two Wiegand Proximity readers, availa-
ble as standard size and narrow style (DGLP FN WLC et DGLI F WLC). Both 
readers are sealed with epoxy, therefore they are suitable for external use 
and have high resistance to vandalism.
DGLl WLC
DGLP FN WLCDGLP WLC
DGLI F WLC
53
-25°C to +70°C
Measure and mark the center lines to 
determine the reader position. Drill the 
fixing screw holes (Diametre: 4MM for the 
mounting plate and 6MM for the reader). 
Drill the wiring access area.
DGLI F WLC
Insert the brass anchors in the mounting 
holes, connect the cable to the connectors, 
then fasten the reader with the DIAX® 
screws using the DIAX® spanner. Make 
sure that the varistor is connected on the 
lock (refer to page 2 «Recommendations»).
DGLP FN WLC
Insert the plastic anchors in the mounting 
holes, connect the cable to the terminal 
block, then fasten the reader with the 
wooden screws. Put the covers on top of 
the reader. Make sure that the varistor 
is connected on the lock (refer to page 2 
«Recommendations»).
Optional (MPLATE)
Single gang box mounting plate for the 
DGLP FN WLC mullion polycarbonate 
proximity reader.
Ref : DGLP FN WLC and DGLI F WLC
4
1
2
3
w w w. c d v g r o u p . c o m
Installation Manual
w w w. c d v g r o u p . c o m
Wiegand Proximity Readers
• Indoor / outdoor application
• Selectable Wiegand output, 26, 30 or 44-bits 
• LED and built-in buzzer (internal or external mode)
• Potted electronics
• Input voltage: 12V DC
• Consumption: 100mA 
RECOMMENDATIONS:
CONTENTS:
Recommended cables
4 twisted pairs 0.6 MM.
Suggested power supplies
These power supplies are 
recommended with these Wiegand
readers:
- ARD12
- BS60
Optional
Single gang box mounting plate
for the DGLP FN WLC reader
(Ref: MPLATE).
Important 
To protect the device from back - emf 
do not forget to mount the varistor on 
the lock in parallel.
Environment
If the readers are mounted in a 
humid area or close to a sea shore, 
we recommend applying a varnish 
on the connections of the cable to 
avoid oxidation.
Varistor
Diax® 
security
tool
Diax® 
security
screw
Brass
anchor
Right 
cover
Left 
cover
Plastic
anchor
Wood 
screw
3 x 40 
mm
DGLI WLC &
DGLI F WLC 1 1 2 2 - - - -
DGLP WLC &
DGLP F WLC 1 - - - 2 2 2 2
FEATURES:
Measure and mark the center lines to 
determine the reader position. Drill the fixing 
screw holes (Diametre: 4MM for the mounting 
plate and 6MM for the reader). Drill the wiring 
access area.
DGLI WLC
Insert the brass anchors in the mounting 
holes, connect the cable to the terminal block, 
then fasten the reader with the DIAX® screws 
using the DIAX® spanner. Make sure that the 
varistor is connected on the lock (refer to page 
2 «Recommendations»).
DGLP WLC
Insert the plastic anchors in the mounting 
holes, connect the cable to the terminal block, 
Then fasten the reader with the wooden 
screws Leave an area to access the cable 
to make the wiring). Put the covers on top 
of the reader. Make sure that the varistor 
is connected on the lock (refer to page 2 
«Recommendations»).
MOUNTING INSTRUCTIONS:
1
2
3
Ref : DGLP WLC and DGLI WLC
w w w. c d v g r o u p . c o m
Installation Manual
w w w. c d v g r o u p . c o m
Wiegand Proximity Readers
• Indoor / outdoor application
• Selectable Wiegand output, 26, 30 or 44-bits 
• LED and built-in buzzer (internal or external mode)
• Potted electronics
• Input voltage: 12V DC
• Consumption: 100mA 
RECOMMENDATIONS:
CONTENTS:
Recommended cables
4 twisted pairs 0.6 MM.
Suggested power supplies
These power supplies are 
recommended with these Wiegand
readers:
- ARD12
- BS60
Optional
Single gang box mounting plate
for the DGLP FN WLC reader
(Ref: MPLATE).
Important 
To protect the device from back - emf 
do not forget to mount the varistor on 
the lock in parallel.
Environment
If the readers are mounted in a 
humid area or close to a sea shore, 
we recommend applying a varnish 
on the connections of the cable to 
avoid oxidation.
Varistor
Diax® 
security
tool
Diax® 
security
screw
Brass
anchor
Right 
cover
Left 
cover
Plastic
anchor
Wood 
screw
3 x 40 
mm
DGLI WLC &
DGLI F WLC 1 1 2 2 - - - -
DGLP WLC &
DGLP F WLC 1 - - - 2 2 2 2
FEATURES:
Measure and mark the center lines to 
determine the reader position. Drill the fixing 
screw holes (Diametre: 4MM for the mounting 
plate and 6MM for the reader). Drill the wiring 
access area.
DGLI WLC
Insert the brass anchors in the mounting 
holes, connect the cable to the terminal block, 
then fasten the reader with the DIAX® screws 
using the DIAX® spanner. Make sure that the 
varistor is connected on the lock (refer to page 
2 «Recommendations»).
DGLP WLC
Insert the plastic anchors in the mounting 
holes, connect the cable to the terminal block, 
Then fasten the reader with the wooden 
screws Leave an area to access the cable 
to make the wiring). Put the covers on top 
of the reader. Make sure that the varistor 
is connected on the lock (refer to page 2 
«Recommendations»).
MOUNTING INSTRUCTIONS:
1
2
3
Ref : DGLP WLC and DGLI WLC
w w w. c d v g r o u p . c o m
Installation Manual
w w w. c d v g r o u p . c o m
Wiegand Proximity Readers
98 mm (3.9")
77
 m
m
 (
3"
)
19,5 mm 
(.75")
14
0 
m
m
 (
5.
5"
)
35 mm 
(1.4")
21,5 mm 
(.8")
104 mm (4.1")
8
0
.5
 m
m
 (
3
.5
")
23 mm 
(.9")
1
4
0
 m
m
 (
5
.5
")
42 mm 
(1.7")
23 mm 
(.9")
PRODUCT OVERVIEW:
The DGLP WLC and DGLI WLC are two Wiegand Proximity readers, availa-
ble as standard size and narrow style (DGLP FN WLC et DGLI F WLC). Both 
readers are sealed with epoxy, therefore they are suitable for external use 
and have high resistance to vandalism.
DGLP WLC
DGLP FN WLCDGLI WLC
DGLI F WLC
53
-25°C to +70°C
Measure and mark the center lines to 
determine the reader position. Drill the 
fixing screw holes (Diametre: 4MM for the 
mounting plate and 6MM for the reader). 
Drill the wiring access area.
DGLI F WLC
Insert the brass anchors in the mounting 
holes, connect the cable to the connectors, 
then fasten the reader with the DIAX® 
screws using the DIAX® spanner. Make 
sure that the varistor is connected on the 
lock (refer to page 2 «Recommendations»).
DGLP FN WLC
Insert the plastic anchors in the mounting 
holes, connect the cable to the terminal 
block, thenfasten the reader with the 
wooden screws. Put the covers on top of 
the reader. Make sure that the varistor 
is connected on the lock (refer to page 2 
«Recommendations»).
Optional (MPLATE)
Single gang box mounting plate for the 
DGLP FN WLC mullion polycarbonate 
proximity reader.
Ref : DGLP FN WLC and DGLI F WLC
4
1
2
3
w w w. c d v g r o u p . c o m
Installation Manual
w w w. c d v g r o u p . c o m
Wiegand Proximity Readers
JUMPER SETTING AND WIRING DIAGRAM:
26-bit Wiegand ouput (Default)
+5V (Default)
+12V
30-bit Wiegand ouput
44-bit Wiegand ouput
1 = ON: External Buzzer Activation
2 = ON: External LED Activation
1 = OFF: Internal Buzzer Activation (Default)
2 = OFF: Internal LED Activation (Default)
BUZZER AND LED DIPSWITCH SETTINGS
ON
1 2
ON
1 2
DIPSWITCH setting will take effect at power up only
DGLI F WLC DGLP FN WLC
ON
1 2
ON
1 2
PULL UPS JUMPER SETTING
WIEGAND OUTPUT JUMPER SETTING
CT-V900-A
2-Door Controller
DO
GND
D1
12V
OUT1
OUT2
OUT5
GREEN
BLACK
WHITE
RED
YELLOW (green LED)
ORANGE (red LED)
BROWN (buzzer)
Blue (Clock)
Not applicable with 
Centaur System
Reader wiring is shown with a 2-door 
controller CT-V900-A and default jumper 
setting of the reader (see above). It may differ 
from other controllers. Please consult the 
manufacturer for details.
DGLP FN 
WLC
DGLI F 
WLC
CAT5 CABLE
(unshield 4 twisted paire cable)
ON
1 2
H D0 D1 B- RV+
26-bit Wiegand ouput (Default)
+5V (Default)
+12V
30-bit Wiegand ouput
44-bit Wiegand ouput
1 = ON: External Buzzer Activation
2 = ON: External LED Activation
1 = OFF: Internal Buzzer Activation (Default)
2 = OFF: Internal LED Activation (Default)
ON
1 2
ON
1 2
DIPSWITCH setting will take effect at power up only
ON
1 2
H D0 D1 B- RV+
DGLP WLC
or
DGLI WLC
BUZZER AND LED DIPSWITCH SETTINGS
PULL UPS JUMPER SETTING
WIEGAND OUTPUT JUMPER SETTING
CT-V900-A
2-Door Controller
CAT5 CABLE
(unshield 4 twisted paire cable)
DO
GND
D1
12V
OUT1
OUT2
OUT5
DO
-
D1
+
V (green LED)
R (red LED)
B (buzzer)
H (Clock)
Not applicable with 
Centaur System
Reader wiring is shown with a 
2-door controller CT-V900-A 
and default jumper setting of 
the reader (see above). It 
may differ from other 
controllers. Please consult 
the manufacturer for details.
or
DGLP WLC
DGLI WLC
w w w. c d v g r o u p . c o m
Installation Manual
w w w. c d v g r o u p . c o m
Wiegand Proximity Readers
JUMPER SETTING AND WIRING DIAGRAM:
26-bit Wiegand ouput (Default)
+5V (Default)
+12V
30-bit Wiegand ouput
44-bit Wiegand ouput
1 = ON: External Buzzer Activation
2 = ON: External LED Activation
1 = OFF: Internal Buzzer Activation (Default)
2 = OFF: Internal LED Activation (Default)
BUZZER AND LED DIPSWITCH SETTINGS
ON
1 2
ON
1 2
DIPSWITCH setting will take effect at power up only
DGLI F WLC DGLP FN WLC
ON
1 2
ON
1 2
PULL UPS JUMPER SETTING
WIEGAND OUTPUT JUMPER SETTING
CT-V900-A
2-Door Controller
DO
GND
D1
12V
OUT1
OUT2
OUT5
GREEN
BLACK
WHITE
RED
YELLOW (green LED)
ORANGE (red LED)
BROWN (buzzer)
Blue (Clock)
Not applicable with 
Centaur System
Reader wiring is shown with a 2-door 
controller CT-V900-A and default jumper 
setting of the reader (see above). It may differ 
from other controllers. Please consult the 
manufacturer for details.
DGLP FN 
WLC
DGLI F 
WLC
CAT5 CABLE
(unshield 4 twisted paire cable)
ON
1 2
H D0 D1 B- RV+
26-bit Wiegand ouput (Default)
+5V (Default)
+12V
30-bit Wiegand ouput
44-bit Wiegand ouput
1 = ON: External Buzzer Activation
2 = ON: External LED Activation
1 = OFF: Internal Buzzer Activation (Default)
2 = OFF: Internal LED Activation (Default)
ON
1 2
ON
1 2
DIPSWITCH setting will take effect at power up only
ON
1 2
H D0 D1 B- RV+
DGLP WLC
or
DGLI WLC
BUZZER AND LED DIPSWITCH SETTINGS
PULL UPS JUMPER SETTING
WIEGAND OUTPUT JUMPER SETTING
CT-V900-A
2-Door Controller
CAT5 CABLE
(unshield 4 twisted paire cable)
DO
GND
D1
12V
OUT1
OUT2
OUT5
DO
-
D1
+
V (green LED)
R (red LED)
B (buzzer)
H (Clock)
Not applicable with 
Centaur System
Reader wiring is shown with a 
2-door controller CT-V900-A 
and default jumper setting of 
the reader (see above). It 
may differ from other 
controllers. Please consult 
the manufacturer for details.
or
DGLP WLC
DGLI WLC
www.cdvgroup.com
All the specifications on this document (photos, drawing, features and dimensions) could be changed without prior notice.
Printed in Canada - Ref: CDVI_DGLP_DGLI_Readers_IE
Manufacturing Access Control since 1985
CDVI (Headquarters/Siège social)
FRANCE
Tel: +33 (0)1 48 91 01 02
Fax: +33 (0)1 48 91 21 21
CDV AMERICAS
CANADA
Tel: +1 (450) 682 7945
Fax: +1 (450) 682 9590
 
CDV BENELUX
BELGIUM
Tel: +32 (0)5 662 02 50
Fax: +32 (0)5 662 02 55
CDV CH
SWITZERLAND
Tel: +41 (0)21 882 18 41
Fax : +41 (0)21 882 18 42
CDV CHINA
CHINA 
Tel: +86 (0)10 87664065
Fax: +86 (0)10 87664165
CDV IBÉRICA
SPAIN
Tel: +34 936 916 551
Fax: +34 935 801 278
 
CDV ITALIA
ITALIA
Tel: +39 0331 97 38 08 
Fax: +39 0331 97 39 70
CDV MAROC
MOROCCO
Tel : +212 (0)22 48 09 40
Fax : +212 (0)22 48 34 69
CDV SWEDEN
SWEDEN
Tel: +46 (0)33 20 55 50
Fax: +46 (0)33 20 55 51
CDV UK Ltd
UNITED KINGDOM
Tel: +44 (0)1628 531300 
Fax : +44 (0)1628 531003 
DIGIT
FRANCE
Tel : +33 (0)1 41 71 06 85
Fax : +33 (0)1 41 71 06 86
LA GACHE ELECTRIQUE
FRANCE
Tel: +33 (0)3 88 77 32 82 
Fax: +33 (0)3 88 77 85 02
PROCOFI
FRANCE
Tel: +33 (0)1 41 83 04 90
Fax: +33 (0)1 41 83 04 91
TECHNO EM
FRANCE
Tel: +33 (0)4 42 96 58 73 
Fax: +33 (0)4 42 96 45 77
INSTALLATION MANUAL
Indoor/Outdoor
Wiegand Proximity Readers
DGLP WLC DGLP FN WLC DGLI WLC DGLI F WLC