Baixe o app para aproveitar ainda mais
Prévia do material em texto
NW (LH) BOX FOR INSTALLATION OF TOP MOUNT SWIVEL WATER/AIR COURSE THROUGH THE SPINDLE LOCK BOLTS TO SECURE AUGER SPINDLE ATTACHMENTS B-58/59 ROTARY BOX NWJ PIN DOWN 4-1/4 (108MM) I.D. HOLLOW STEM AUGER BOX 4-1/4 (108MM) I.D. HOLLOW STEM AUGER PIN WITH MOUNTING FLANGE GIMBAL COUPLING FLANGE MOUNTED HOLLOW STEM AUGER BOX SAFETY STYLE AUGER DRIVE COUPLING MANUAL ROD CHUCK Auger Drive Components HD GIMBAL COUPLING MOUNTING FLANGE LOCKING WEDGE POCKET 3-3/8“ (86mm) THREADED HSA BOX FLANGE MOUNTED Auger Drive Components Gimbal Coupling Description Part # lb./kg. ADAPTER: 3-Key AUGER (3-Key) 3-1⁄4″ HSA (83mm) 213296 19(8.6) 4-1⁄4″ HSA (108mm) 150480 27 (12.2) 6-5⁄8″ HSA (168mm) 150453 35 (15.9) 8-1⁄4″HSA (210mm) 216561 40 (18.1) 10-1⁄4″HSA (261mm) 150619 63 (28.6) 12-1⁄4″HSA (311mm) 217486 86 (39.1) BLANK FLANGE 217013 24 (10.9) ADAPTER: 2-KEY HEAVY DUTY 4-1⁄4″ HSA (108mm) 150694 27 (12.2) 6-1⁄4″ HSA (159mm) 217904 33 (15.0) Gimbal Coupling is an open center auger coupling that can be used with the in-hole sampling hammer. The coupling connects hollow stem augers to drill rigs with open spindles and permits continuous access through the spindle and augers to the bottom of the hole. Component Parts Ref Description Part No. lb./kg. Gimbal Coupling 61012-01 75 (34) 1 Hex Bolt (8 req’d for B-47HD,B-53 & B-80) 3100-0067 1 Hex Bolt (8 req’d for B-57, B-59 & B-61HDX) 3100-0037 2 Hex Nut (8 req’d for B-47HD, B-53 & B-80) 3122-0008 3 Lock Washer (8 req’d) 3126-0008 4 Top Yoke 052644 20 (9.1) 5 Cross 140632 16 (7.3) 6 Retainer Cap (4 req’d) 140630 7 Lock Washer (8 req’d) 3126-0005 8 Hex Bolt (8 req’d) 3100-0008 9 Pin (4 req’d) 140633 1 (.5) 10 Bearing (4 req’d) 140634 1 (.5) 11 Hex Jam Nut (4 req’d) 3204-0005 12 Set Screw (4 req’d) 3142-0081 13 Bottom Yoke 140631 22 (10) 14 Grease Fitting (4 req’d) 3129-0001 15 Lock Washer (10 req’d) 3126-0005 16 Hex Bolt (10 req’d 3100-0008 Heavy Duty Gimbal Coupling is a heavy duty, open center auger coupling that can be used within-hole sampling hammers. The coupling connects hollow stem augers to drill rigs with open spindles and permits continuous access through the spindle and augers to the bottom of the hole. Auger sizes are identified by auger I.D. Auger Drive Components Heavy Duty Gimbal Coupling Component Parts Ref Description Part No. Gimbal Coupling 61041-01 1 Top Yoke 217792-01 2 Cross 217793 3 Pin 217794 4 Cap, Retainer 217795 5 Lockwasher, 5/16 3129-0005 6 Bearing 217796 7 Bolt, Hex 5/16-18 UNC X 3/4” Lg 3100-0008 8 Nut, Hex Jam 5/16-18 UNC 3204-0005 9 Setscrew, Hex Socket Head 3142-0091 10 Yoke, Bottom 217792-02 11 Lockwasher, 1/2” 3126-0008 12 Bolt, Hex 1/2-13 UNC x 1-1/2” Lg 3100-0037 13 Auger Connector (4-1/4 HSA) 217797 Auger Connector (6-1/4 HSA) 217798 Auger Connector (8-1/4 HSA) 217799 Auger Connector (10-1/4 HSA) 217800 Auger Connector (12-1/4 HSA) 217801 14 Fitting Grease 3129-0001 Gimbal to Hex Adapter Description Part # lb./kg. HEX ADAPTER: 3-Key AUGER 3-1⁄4″ (83mm) Pin to 1-5⁄8″ Hex Box 150344-02 11 (5) 3-1⁄4″ (83mm) Pin to 2″ (51mm) Hex Box 150344-01 12 (5.4) 4-1⁄4″ (108mm) Pin to 1-5⁄8″ (41mm) Hex Box 150496-01 15 (6.8) 4-1⁄4″ (108mm) Pin to 2″ (51mm) Hex Box 150496-02 16 (7.3) 6-5⁄8″ (168mm) Pin to 1-5⁄8″ (41mm) Hex Box 150456-01 18 (8.2) 6-5⁄8″ (168mm) Pin to 2″ (51mm) Hex Box 150456-02 18 (8.2) Heavy Duty Gimbal Coupling is a heavy duty, open center auger coupling that can be used within-hole sampling hammers. The coupling connects hollow stem augers to drill rigs with open spindles and permits continuous access through the spindle and augers to the bottom of the hole. Auger sizes are identified by auger I.D. Gimbal to hex adapters allow using a gimbal coupling set upfor Hollow Stem augers to be used to turn tools with hex drives. It consists of an auger pin up and a hex socket down. Sizes are identified by hollow stem auger I.D. and hex size. Auger Drive Components Adapter: Hollow Stem Auger Pin Up to Hollow Stem Auger Down Description Part # lb./kg. SIZE ADAPTER: 3-Key TO 3-Key 4-1⁄4″ (108mm) Pin to 6-5⁄8″ (168mm) Box 150547-02 45 (20.4) 6-5⁄8″ (168mm) Pin to 3-1⁄4″ (83mm) Box 150456-03 24 (10.9) 6-5⁄8″ (168mm) Pin to 4-1⁄4″ (108mm) Box 150456-05 30 (13.6) 6-5⁄8″ (168mm) Pin to 8-1⁄4″ (210mm) Box 150456-07 40 (18.1) 6-5⁄8″ (168mm) Pin to 10-1⁄4″ (260mm) Box 150645-04 68 (30.8) 8-1⁄4″ (210mm) Pin to 4-1⁄4″ (108mm) Box 150539-04 38 (17.2) 8-1⁄4″ (210mm) Pin to 6-5⁄8″ (168mm) Box 150539-05 40 (18.1) Auger Coupling Assemblies Description Part No. 1-1⁄8″ (29mm) Hex w/fabricated collar (B-24, B-31) 71109-15 1-5⁄8″ (41mm) Hex w/fabricated collar (B-24, B-31) 71109-14 1-5⁄8″ (41mm) Hex Heavy Duty w/safety collar (B-47HD, B-53, B-57, B-59, B-61HDX) 71109-11 2″ (51mm) Hex Heavy Duty w/safety collar (B-47HD, B-53, B-57, B-59, B-61HDX) 71109-10 Component Parts Ref Description Part No. 1 Journal & bearing kit (B-24, B-31) 210146-06 1 Journal & bearing kit (B-47HD, B-53, B-57, B-59, B-61HDX) 214541 2 Threaded bushing 150308 3 Lockbolt (for 1-1⁄8″ (29mm) Hex 216808-10 3 Lockbolt 216808-02 4 Lower yoke for Heavy Duty 1-5⁄8″ (41mm) Hex for 71109-11 217279-02 4 Lower yoke 2″ 51mm) Hex for 71109-10 217279-01 * Neoprene boot (Use with P/Ns 71109-14, -15) 217299 * Neoprene boot (Use with P/Ns 71109-10, -11) 217298 5 Flanged yoke (Use with P/Ns 71109-14, -15) 217714 5 Flanged yoke (Use with P/Ns 71109-10, -11) 214542 Coupling is connected to drill spindle through a multi-bolt flange. A universal joint is connected to the hex socket to lessen bearing wear on mis-aligned holes. A rubber sheath completely covers the countersunk connecting bolts to provide a smooth surface and enhance operator safety.
Compartilhar