New Updated Questions for Cisco 300-810 Exam

Prévia do material em texto

Itfreedumps provides the latest online questions for all IT certifications,
such as IBM, Microsoft, CompTIA, Huawei, and so on. 
Hot exams are available below. 
AZ-204 Developing Solutions for Microsoft Azure 
820-605 Cisco Customer Success Manager 
MS-203 Microsoft 365 Messaging 
HPE2-T37 Using HPE OneView 
300-415 Implementing Cisco SD-WAN Solutions (ENSDWI) 
DP-203 Data Engineering on Microsoft Azure 
500-220 Engineering Cisco Meraki Solutions v1.0 
NACE-CIP1-001 Coating Inspector Level 1 
NACE-CIP2-001 Coating Inspector Level 2 
200-301 Implementing and Administering Cisco Solutions 
Share some 300-810 exam online questions below. 
1.Refer to the exhibit.
 1 / 10
https://www.itfreedumps.com/exam/real-microsoft-az-204-dumps/
https://www.itfreedumps.com/exam/real-cisco-820-605-dumps/
https://www.itfreedumps.com/exam/real-microsoft-ms-203-dumps/
https://www.itfreedumps.com/exam/real-hp-hpe2-t37-dumps/
https://www.itfreedumps.com/exam/real-cisco-300-415-dumps/
https://www.itfreedumps.com/exam/real-microsoft-dp-203-dumps/
https://www.itfreedumps.com/exam/real-cisco-500-220-dumps/
https://www.itfreedumps.com/exam/real-nace-nace-cip1-001-dumps/
https://www.itfreedumps.com/exam/real-nace-nace-cip2-001-dumps/
https://www.itfreedumps.com/exam/real-cisco-200-301-dumps/
An engineer must configure Cisco IM and Presence server high availability so that the publisher node
fails over to the subscriber node if the publisher node becomes unavailable On the Presence
Redundancy Group Configuration page the engineer receives this message ‘High availability is not
enabled for this cluster ".
Which two actions must the engineer perform to resolve the issue? (Choose two.)
A. Add IMPSub as a secondary presence server in the redundancy group
B. Click Save and restart the Cisco Presence Engine.
C. Replace iMPPub with IMPSub m the redundancy group.
D. Add a new presence redundancy group and click Save
E. Select Enable High Availability and dick Save.
Answer: A,E
2.Which CLI command is used to collect traces from the Cisco Presence engine for seven days?
A. file build log cisco_presence_engine 7
B. file build log cisco_presence 168
C. file build log presence_engine 7
D. file build log presence_engine 168
Answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/configAdminG
uide/12_0_1/cup0_b_config-admin-guide-imp-1201/cup0_b_config-admin-guide-imp-
1201_chapter_010101.html
3.A jabber user reports that they receive pop-up windows warring about untrusted certificates when
they attempt to log in to jabber without receiving the certificate warnings.
Which two actions resolve this issue? (Choose two.)
A. Add the certificates to the client machine’s local certificate store or keychain
B. Reinstall the Jabber client using the /quiet option
C. Configure Jabber with the INVALID_CERTIFICATE_BEHAVIOR option set to “RejectAndNotify.”
D. Replace self-signed certificates with certificates signed by a CA
E. Move the user to a different Presence Redundancy Group
 2 / 10
Answer: A,D
4.Which SIP request type is used by Cisco Unity Connection to inform Cisco Unified Communications
manager that the Message Waiting Indicator must be turned on or off for a specific line?
A. NOTIFY
B. UPDATE
C. SUBSCRIBE
D. PUBLISH
Answer: A
5.Which two protocols does the Cisco IM Presence service use to federate with external domains?
(Choose two.)
A. XMPP
B. SNMP
C. SIP
D. SCCP
E. SMPP
Answer: A,C
Explanation:
Reference: https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cucm/im_presence/interdoma
in_federation/11_5_1/cup0_b_interdomain-federation-guide-imp-115.pdf
6.Refer to the exhibit.
 3 / 10
 4 / 10
Users connected to the internal network report a “Cannot communicate with the server” error while
trying to log in to Cisco Jabber using auto service discovery. The Jabber diagnostics and the SRV
record configuration are as shown in the exhibit. The host cucm1.ccnp.cisco.com is correctly resolved
by the user desktops with the Cisco Unified Communications Manager IP address.
Why is the user not able to log in?
A. SRV protocol is not set up correctly. It should be _tls instead of _tcp.
B. Marking weight as 0 on the SRV record makes it inactive, so Jabber cannot discover the Cisco
Unified CM.
C. The port specified on the SRV record is wrong.
D. The domain ccnp.cisco.com does not exist on the DNS server.
Answer: C
Explanation:
Reference:
https://community.cisco.com/t5/collaboration-voice-and-video/jabber-client-login-and-login-issues/ta-
p/3143446
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/CJAB_BK_C606D8A9_0
0_cisco-jabber-dns-configuration-guide/CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-
guide_chapter_010.html
7.DRAG DROP
Drag and drop the SAML components from the left onto the descriptions on the right.
Answer:
Explanation:
Graphical user interface
 5 / 10
Description automatically generated with medium confidence
8.Which Cisco Unified Connections Manager service is required for users to control their desk phones
using Cisco Jabber?
A. Cisco CTIManager
B. Cisco CTL Provider
C. Cisco Presence Engine
D. Cisco Serviceability Reporter
Answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/11_5/CJAB_BK_D00D8CB
D_00_deployment-installation-guide-cisco-jabber115/CJAB_BK_D00D8CBD_00_deployment-
installation-guide-cisco-jabber115_chapter_0111.html
9.1.An end user opened a ticket, stating that before logging in to Jabber for Windows, a warning is
displayed that a server certificate has expired.
Which two certificates must be verified on the Cisco Unified Communications Manager and IM&P
deployment? (Choose two.)
A. capf on Cisco Unified CM
B. cup-xmpp on IM&P
C. callmanager on Cisco Unified CM
D. tomcat on Cisco Unified CM
E. cup on IM&P
Answer: B,D
Explanation:
https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-
presence/116917-technote-certificate-00.html
10.Fraudulent calls are being made from Cisco Unity Connection.
Which action prevents the calls from reaching the PSTN using SCCP integration?
A. Change the configuration of the routing rule.
B. Change the CSS of the voicemail port.
C. Change the Rerouting CSS on the trunk to Cisco Unity Connection.
D. Remove values from restriction table.
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/unified-communications/unity-
connection/119337-technote-cuc-00.html
11.When Cisco IM and Presence is configured to use automatic fallback, how long does the Server
Recovery Manager service wait for a failed service/server to remain active before an automatic
fallback is initiated?
A. 10 minutes
B. 20 minutes
C. 30 minutes
D. 1 hour
Answer: C
Explanation:
 6 / 10
Reference: https://www.cisco.com/c/en/us/support/docs/unified-communications/unified-communicati
ons-manager-im-presence-service/200958-IM-and-Presence-Server-High-Availability.html
Automatic Fallback
Automatic fallback takes place when the server monitors the services and the Server Recovery
Manager (SRM) service will automatically fallback users to their homed nodes. The key in this
configuration is that the Server Recovery Manager (SRM) service will wait 30 minutes for a failed
service/server to remain active before an automatic fallback is initiated. Once this 30 minute up time
is established, user sessions are moved back to their homed nodes. The Jabber client will apply the
re-log in upper and lower limits for the fallback. Automatic fallback is not the default configuration, but
it can be enabled. To enable automatic fallback, change the Enable Automatic Fallback parameter in
the Server Recovery Manager Service Parameters to value True.
12.Secure XMPP communication is required for XMPP federation with external domains and the
Cisco IM and Presence.
Which certificate is used forXMPP interdomain federation when connecting to an externally federated
domain?
A. cup
B. cup-xmpp
C. cup-xmpp-s2s
D. Tomcat
Answer: C
Explanation:
CUP-XMPP-S2S (Cisco Unified Presence - Extensible Messaging and Presence Protocol - Server to
Server) Certificate • Used to validate secure connection for XMPP interdomain federation with
externally federated XMPP system.
13.An engineer is configuring XMPP federation on the Cisco IM and Presence server and has
changed the security settings to TLS Optional on one node in the cluster.
What is the next step in the configuration process?
A. Start the Cisco DB Replicator
B. Start the Cisco Replication Watcher.
C. Restart the Cisco XCP Router.
D. Restart the Cisco Presence Engine
Answer: C
14.An engineer Is troubleshooting an MWI Issue between Unity Express and CallManager Express. In
the debug SIP logs, the engineer can see CallManager Express responding to Unity Express with a
488 Not Acceptable Media message.
Which action resolves the issue?
A. Ensure that codec G.722 Is configured In the dial peer.
B. Ensure that codec G.711ulaw is configured in the dial peer.
C. Ensure that codec G.711alaw is configured In the dial peer.
D. Ensure that codec G.729 is configured In the dial peer.
Answer: B
15.What is the primary mechanism in Cisco Unity Connection that is used for toll fraud prevention?
A. restriction tables
B. fraud tables
 7 / 10
C. transfer rules
D. calling search spaces
Answer: A
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/10x/security/guide/10x
cucsecx/10xcucsec020.pdf
16.Which step is the first for web-based single sign-on login?
A. Authenticate.
B. Redirect to IdP to get authenticated.
C. Present authentication assertion.
D. Request access to protected service.
Answer: D
17.What are two characteristics of HTTPS networking for Cisco Unity Connection? (Choose two)
A. HTTPS single-site networks are joined via an intersite link
B. HTTPS networking uses a ring topology
C. HTTPS networking supports a maximum of 25 locations
D. HTTPS networking uses the SMTP protocol
E. HTTPS networking supports multisite networks
Answer: C,D
18.Users on Cisco.com experience issues while using Cisco Jabber, and the error 'Cannot
communicate with the server" appears. An engineer checks the logs for the Jabber client and
discovers the error "LERR_JABBER_AUTH <17>: Authentication error with server e.g. resource bind,
TLS, create a session or SASL error.
What should be checked to resolve this issue?
A. if the LDAP server Is reachable and if port 443 Is open
B. if cup-xmpp certificates are valid and if port 8443 is open
C. if the cup-xmpp certificates are valid and if port 5222 is open
D. if the LDAP server Is reachable and If port 5222 Is open
Answer: C
19.What are two characteristics of Smart Card Authentication for Cisco UC Applications? (Choose
two.)
A. requires a PIN password or passphrase
B. requires a card reader
C. is supported on all devices and operating systems
D. uses single-factor authentication
E. is less secure than form-based authentication
Answer: A,B
20.An administrator is configuring call handlers in Cisco Unity Connection. The administrator must
ensure that internal extensions are restricted so that callers must go through the company operator to
reach employees, and so that callers hear an error message if they attempt to dial extensions directly.
Which setting is configured to accomplish this task?
A. Transfer Rules
 8 / 10
B. Caller Input
C. Greetings
D. Message Settings
Answer: B
21.An administrator is troubleshooting a Cisco Jabber Deskphone Control Issue.
Which CTI event from the logs denotes that the request from Jabber to CTl Manager must the
administrator check?
A. CTI ProviderOpenRequest
B. CTI ProviderRequest
C. CTI OpenRequest
D. CTI AvailableRequest
Answer: A
22.Which two steps are needed to configure high availability in Cisco IM and presence? (choose two.)
A. Enable the Failover Check box
B. Configure CUP administrator
C. Assign the subscriber to the redundancy group
D. Select the enable high availability checkbox and save the configuration change
E. Configure the CUP AXL user.
Answer: C,D
23.When implementing dialing behavior in Cisco Unity Connection, which feature prevents calls to
long-distance or international phone numbers?
A. restriction tables
B. calling search spaces
C. inbox profiles
D. partitions
Answer: A
24.Refer to the exhibit.
An administrator is troubleshooting an issue with XMPP Federation between two. eight-node IM and
Presence clusters. After looking at the logs, the administrator finds this message and must publish
one or more DNS SRV records containing one or more addresses of the IM and Presence node(s).
How many nodes must be selected to publish?
A. 1
B. 5
C. 10
D. 20
Answer: A
25.Refer to the exhibit.
 9 / 10
Which statement is true?
A. If the IM&P node in sub-cluster-1 goes down, then users assigned to it are randomly split between
the two remaining subclusters.
B. The administrator must add one node to each subcluster for high availability.
C. IM&P nodes in each subscluster must be configured from the same OVA template.
D. Each Cisco IM&P subcluster must have the same number of nodes.
Answer: B
26.An engineer Is assisting a user who Is reporting Jabber Presence Issues. Whenever the user Is on
an active call, Cisco Jabber does not show the user as active when on a call. However, the user can
set the presence status manually, and that status shows correctly.
Which action resolves the issue?
A. Assign the user to a different Presence Redundancy Group.
B. Restart the XCP Router service.
C. Set the Owner ID on the users desk phone.
D. Associate the user to the line on the Directory Number Configuration page.
Answer: D
Get 300-810 exam dumps full version.
Powered by TCPDF (www.tcpdf.org)
 10 / 10
https://www.itfreedumps.com/exam/real-cisco-300-810-dumps/
http://www.tcpdf.org