Chegg Solutions for Microelectronic Circuits (Adel S Sedra, Kenneth C Smith) (Z-Library)_parte_574

Prévia do material em texto

Step of 5 5.006P The drain current is, iD = Here, is transconductance parameter W is the width to length ratio of the channel L is the gate-to-source voltage V, is the threshold voltage The MOSFET transconductance parameter is, W Substitute for V for Step of 5 Enter the following code in MATLAB to plot versus for different values of on xlabel vDsylabel iD Step of 5 The set of versus for different values of is shown in Figure 1. 6 VGS=0.5 VGS=1 5 VGS=1.5 VGS=2.5 4 2 1 0 0 0.005 0.01 0.015 0.02 0.025 0.03 0.035 0.04 0.045 0.05 vDs Figure 1 Write the formula for drain-to-source resistance, for small 1 The MOSFET transconductance parameter is, W The linear resistance is, Substitute for Step of 5 Determine for 1 = Thus, the value of for = 0.5 is 8 Determine for V I Thus, the value of for = V IS Determine for 1 = Thus, the value of for = 1.5 is 200 Ω Step of 5 Determine for =2V Thus, the value of for = 2 V is . Determine for I Thus, the value of for = is