desenho técnico vaso e presao Sample3 Drawing(1)

Prévia do material em texto

1'-478"
1'-778"
2'-634"
1'-41316"
2'-978"
4'-2"
5'-10"
0°
90°
BACK
270°
FRONT
TYP
1/4"
5'-6"
10' 2'-2" TYP
2'-7"
LEFT RIGHT
Ø8'
180°
RIGHT END
2'-7"
8'
8'-6"
1' 1'
2'-7"
TYP5/16"
FRONT VIEW
1112"
5 516"
2'-1012"
14'-4" (REF.)
5'
GRIND CIRC. WELD
FLUSH UNDER
REPAD
PVEng Pressure Vessel Engineering120 Randall Drive, Suite B, Waterloo, Ontario, N2V 1C6P: 519.880.9808 F: 519.880.9810
http://www.pveng.com info@pveng.com
SIZE JOB ID REV
SHEETSCALE
TITLE
DRAWING NO
SAMPLE 3 SAMPLE 3 1
HORIZONTAL RETENTION TANK
1 of 2
B
1:30
Design Code: ASME Code Section VIII Division 1, 2007 Edition
Design Pressure Internal: 75 psi @ 150°F
Design Data
Flange
Nozzle Schedule
Nozzle
Mark Size Qty Service Leg41
Leg
42
Leg
43
Welds
0 RELEASE 05/23/02 LB
REVISION HISTORY
REV DESCRIPTION DATE INITIALS
Bill of Materials
Item Qty MaterialDescription
1 1 SHELL: 5/16" ROLLED PLATE SA-516 70
4 2 PIPE: 6" SCH80 SA-106B
8 1 HALF CPLG: 3/4" 3000# NPT SA-105
16 4 BAFFLE: 1/4" THICK SA-516 70
18 1 CODE NAMEPLATE STAINLESS
3 3 MANWAY:12" x 16" c/w 3/4" x 4" RING SA-106B/SA-516 GR.70
7 1 HALF COUPLING:1 1/2" 3000# NPT SA-105
17 1 CODE NAMEPLATE BRACKET SA-516 70
2 2 HEAD: 2:1 SE, 96"OD, 5/16" THK, .282" MTAF, 1.5" SF SA-516 70
5 2 FLANGE: 6" 150# RFSO SA-105
Type
75 psi MAWP:
N/ADesign Pressure External:
-20°F @ 75 psiMDMT:
98 psi @ 55°F for 1/2 HourHydro Test Pressure:
NonePWHT:
NoneRadiography:
0"Corrosion Allowance:
Exempt per UG-20(f)Impact Test:
1 REVISED 10/20/08 ART
SB
1. All welds shall be neat in appearance, free of slag and other defects.
2. Vessel to be cleaned of scale, oil, weld splatter and all foreign
 material prior to hydrostatic test. 
3. Remove all sharp edges on nozzles (1/8" minimum radius)
4. All Nozzles to support nominal loads only.
5. Vessel weight ( approx. dry ) 6,600 lbs
 Vessel weight ( approx. test ) 47,000 lbs
6. Capacity 640 cu.ft.
8. Manway - Clark Kennedy Co. CRN: 0H7379.5C
NOTES:
Weld
(w)
Flange
CRN
XYZ Vessel Corp.
75
N-0000
-
150
-
-20 75
2007
W
~
Minimum Design Metal Temperature (MDMT)
Max. allowable working pressure (MAWP)
psi (kPa)
°F (°C)
Max. allowable external working pressure
Manufacturer's serial number
Year built
°F (°C)
(Name of Manufacturer)
Certified by
psi (kPa) at
°F (°C) at
psi (kPa) at
9 2 WEAR PLATE: 12" WIDE x 3/8" THICK SA-36
10 2 SADDLE PLATE: 3/8" THICK SA-36
11 2 BASEPLATE: 70" x 12" x 3/4" SA-36
14 4 SADDLE RIB: 16.88" x 5" x 1/2" SA-36
13 8 SADDLE RIB: 19.9" x 5" x 1/2" SA-36
12 8 SADDLE RIB: 30.72" x 5" x 1/2" SA-36
15 2 LIFT LUGS: 3/4" THICK SA-516 70
6 1 REINFORCING PAD: 12" OD x 5/16" THICK SA-516 70
A 3/4" 1 VENT I 1/4" - - - - -
B 6" 1 INLET II 5/16" - 5/16" 5/8" t 1"
C 6" 1 OUTLET V 5/16" 1/4" - 5/8" t -
D 12x16" 1 MANWAY II 5/16" - 5/16" - - 1"
G 1 1/2" 1 DRAIN I 5/16" - - - - -
E 12x16" 1 MANWAY II 5/16" - 5/16" - - 1"
F 12x16" 1 MANWAY II 5/16" - 5/16" - - 1"
9. Repad to have min. 1/8" telltale hole
7. Fluid: Water
Proj.
6'-10 716"
5'-111116"
TYP
SEAL WELD ALL AROUND
TO VESSEL SHELL
R2"
RAT HOLE
R3'-111116"
ADJUST RADIUS
TO FIT ID OF SHELL
BAFFLE
ITEM# 16
174°
3" CORNER RADIUS (TYP)
R4'
WEAR PLATE
ITEM# 9
150°
R4'-038"
7'-10 316"
3
8"
4'-458"
5'-514"
5'-914"
OPTIONAL SEAM
NO NDE
SADDLE PLATE
ITEM# 10
R1" HOLES FOR 1"
ANCHOR BOLTS
9"
1'
4'-2"
5'-10"
BASEPLATE
 ITEM# 11
Ø3"R5"
5"
1'-4"
1/4"
CONTOUR TO FIT HEAD
LIFTING LUG DETAIL
SCALE 1:4
3/4" THICK PLATE
Ø114"
10"
SIZE JOB ID REV
SHEETSCALE
DRAWING NO
PVEng
Pressure Vessel Engineering
120 Randall Drive, Suite B, Waterloo, Ontario, N2V 1C6
P: 519.880.9808 F: 519.880.9810
http://www.pveng.com info@pveng.com
SAMPLE 3 SAMPLE 3 0
2 of 2
B
1:30