D-VXR-DY-23 Dell VxRail Deploy 2023 Exam Dumps

Text Material Preview

Download the latest D-VXR-DY-23 Exam Dumps For Best Preparation
1 / 9
Exam : D-VXR-DY-23
Title :
https://www.passcert.com/D-VXR-DY-23.html
Dell Technologies VxRail
Deploy 2023
Download the latest D-VXR-DY-23 Exam Dumps For Best Preparation
2 / 9
1.Which two files are used to automate VxRail deployment and validate the network configuration?
A. Appliance JSON file
PEQ data file
B. Appliance JSON file
SPEQ
C. VxRail Test Plan
SPEQ
D. VxRail Configuration Portal
PEQ data file
Answer: A
2.An implementation engineer is tasked with setting up RecoverPoint for VMs on a 5-node V570F cluster.
How many VMs are licensed to be protected on the cluster?
A. 5
B. 15
C. 25
D. 30
Answer: C
3.What is a consideration when using ToR switches with VxRail?
A. IPv6 Multicast must be disabled in this environment.
B. Link aggregation must be enabled on VxRail switch ports.
C. VxRail iDRAC Management ports require 10 GbE ports.
D. All-Flash models must use 10 GbE or faster ports.
Answer: D
4.When using VxRail Manager, what is the source of information that can help validate good VxRail
system post-deployment status?
A. Last Heartbeat, Last Configuration Sent, Network Environment Settings, Cluster Monitor
B. System Diagnostic, Events, Health Logical View, Health Physical View, Log Bundle
C. MARVIN-Virtual-SAN-Cluster > Manage > Health and Performance
D. MARVIN-Virtual-SAN-Cluster > Monitor > Virtual SAN > Health
Answer: D
5.An implementation engineer is configuring the network firewall to support a VxRail installation.
Where can they find the necessary firewall rules?
A. Network Validation Tool
B. VxRail Configuration Portal
C. As-Built Configuration Report
D. Rack worksheet of the Network PEQ
Answer: C
6.What is the default network traffic configuration for a VxRail node with 2 x 10 GbE ports?
A. Management and vMotion on Uplink1 vSAN and Virtual Machines on Uplink2
Download the latest D-VXR-DY-23 Exam Dumps For Best Preparation
3 / 9
B. Management, Virtual Machines, and vSAN on Uplink1 vMotion on Uplink2
C. Management, vMotion, and Virtual Machines on Uplink1 vSAN on Uplink2
D. Management and Virtual Machines on Uplink1 vSAN and vMotion on Uplink2
Answer: C
7.What is a characteristic of the VxRail S Series node?
A. Large form factor drives
B. Dense Flash disks
C. Form factor of 2U4N
D. Form factor of 1U1N
Answer: D
8.After finishing the rack and stack of a VxRail Model G410 cluster, in which sequence should the nodes
be powered on?
A. All four at the same time
B. Any order possible
C. Forward order (1 - 4)
D. Reverse order (4 - 1)
Answer: B
9.Which VxRail Series is designed to support a VDI environment and requires a GPU card in each host?
A. S Series
B. V Series
C. G Series
D. P Series
Answer: B
10.According to the VxRail PEQ Engagement Details worksheet, links to what resources should the SE
send to the customer?
A. VxRail vCenter Server Planning Guide
Network Validation Tool
B. VxRail QuickStart Guide
Network Validation Tool
C. VxRail vCenter Server Planning Guide
VxRail Network Planning Guide
D. VxRail QuickStart Guide
VxRail Network Planning Guide
Answer: B
11.Refer to the Exhibit which shows a red box around a node PSNT.
Download the latest D-VXR-DY-23 Exam Dumps For Best Preparation
4 / 9
What is a characteristic of the node marked by the red box?
A. VxRail Primary node hosting the VxRail Manager VM.
B. VxRail Primary node hosting the NTP and DNS servers.
C. VxRail node hosting the DNS server.
D. VxRail node that can be excluded from the initial VxRail build.
Answer: A
12.Match each component of the VxRail HCI System Software to its description.
Answer:
Download the latest D-VXR-DY-23 Exam Dumps For Best Preparation
5 / 9
13.During the activation of Internal SRS, the implementation engineer receives a message that the
deployment has failed What is a possible cause?
A. Site ID mismatch between the IB database and the SRS Wizard
B. VxRail status already set to installed' in IB database
C. SRS VE Gateway on the same subnet as the VxRail Manager
D. Witness Gateway not configured following Dell best practices
Answer: A
14.What must be enabled on ToR switch ports connected to VxRail nodes to support multiple VLANs?
A. Access Mode
B. Link Aggregation
C. Trunk Mode
D. Rapid Spanning Tree
Answer: C
15.Which two vSAN licenses include entitlement for VMware HCI Mesh? (Select 2)
A. Standard
B. Enterprise
C. Enterprise Plus
D. Advanced
Answer: BC
16.Which URL is used to enter the planning information for a new VxRail Cluster deployment?
A. https://dl.dell.com/downloads/DL90235_Network-Validation-Tool-for-VxRail...
B. https://www.dell.com/support/home/en-us/product-support/product/vxrail-s...
C. https://etools-acg.dell.com/vxrail
D. https://vxrailconfiguration.dellemc.com
Answer: D
Download the latest D-VXR-DY-23 Exam Dumps For Best Preparation
6 / 9
17.A VxRail Cluster has just been deployed. Use the VxRail simulator to determine the Service Tag,
Model, and ESXJ IP Address of the first node - vcluster730.esx01.edu.local. Note: It is necessary to dose
(x) the simulator window before you can select a response to this question.
Download the latest D-VXR-DY-23 Exam Dumps For Best Preparation
7 / 9
Download the latest D-VXR-DY-23 Exam Dumps For Best Preparation
8 / 9
A. Option C
B. Option A
C. Option D
D. Option B
Answer: C
18.You are attempting to reset a single G Series node running 4.0.x code to the factory default. You
discover that the configbundle.tgz file is corrupt.
What is the recommended method to recover the node?
Download the latest D-VXR-DY-23 Exam Dumps For Best Preparation
9 / 9
A. Rapid Appliance Self Recovery
B. Node Replacement
C. Mobile Build Server
D. Reset Script
Answer: C
19.According to Dell best practices, which VxRail series can be deployed in either datacenters or remote
locations?
A. G Series
B. E Series
C. V Series
D. D Series
Answer: B
20.An existing Dell EMC customer wants to deploy a new VxRail cluster on premise. Each node of the
new cluster will be configured with a single disk group containing one 1.6 TB Flash drive for the capacity
tier. The customer plans on using mirroring and needs to have at least 2 TB of usable capacity in the
vSAN datastore.
What is the minimum number of VxRail nodes required?
A. 2
B. 3
C. 4
D. 5
Answer: A
21.Which items are validated during the NVT test?
A. Bandwidth and STP
B. DNS and NTP
C. Latency and NTP
D. DNS and WINS
Answer: B
22.An implementation engineer has just completed the deployment of a new VxRail cluster. They are
unable to connect to the vCenter Server.
What can they use to confirm the physical health of the VxRail nodes?
A. vSphere Client
B. SRS
C. VxRail Manager
D. iDRAC
Answer: D