Identify the interfaces of the LAN and WAN networks of a Cisco router. Identify the available administration ports. Identify the LAN and WAN networ...

Identify the interfaces of the LAN and WAN networks of a Cisco router.
Identify the available administration ports.
Identify the LAN and WAN network interfaces of the East router.
Identify the expansion slots.
Select the correct modules for connectivity.
Add the correct modules and turn on the devices.
The East router has 2 WAN interfaces and 2 Gigabit interfaces.
There are 4 physical interfaces indicated.
The default bandwidth of the interface is 1544 Kbits.
There is 1 expansion slot available for adding more modules to the East router.
Switch2 has 5 expansion slots available.
The HWIC-4ESW module can be used to connect PCs 1, 2, and 3 to the East router.
The HWIC-4ESW module can connect up to 4 hosts.
The PT-SWITCH-NM-1FGE module can be inserted to provide a Gigabit optical connection to Switch3.
The interfaces for this router model are not interchangeable with the active system.
The device must be turned off before adding or removing modules.