The pre-dimensioning of the beams is made from the structural conception elaborated by the engineer based on the architectural project. In general,...
The pre-dimensioning of the beams is made from the structural conception elaborated by the engineer based on the architectural project. In general, the width of the beam is defined as a function of the thickness of the finished walls. Considering this information and the content studied about pre-dimensioning, what are the correct relationships for the pre-dimensioning of double-supported beams, being H = height of the beam and L = span of the analyzed beam section?
a) L/10 and L/14.
b) L/5 and L/6.
c) L/8 and L/10.
d) L/8 and L/12.
e) L/10 and L/12.
a) L/10 and L/14.
b) L/5 and L/6.
c) L/8 and L/10.
d) L/8 and L/12.
e) L/10 and L/12.
💡 1 Resposta
Ed 
A resposta correta para o pré-dimensionamento de vigas duplamente apoiadas, considerando H como a altura da viga e L como o vão da seção da viga analisada, é a alternativa c) L/8 e L/10.
✏️ Responder
Para escrever sua resposta aqui, entre ou crie uma conta
Outros materiais
Perguntas relacionadas
Compartilhar