Identify the vital, main, emergency, and power circuits in faults by nomenclature.
9.2-Identify the vital, main, emergency, and power circuits in f...
Identify the vital, main, emergency, and power circuits in faults by nomenclature. 9.2-Identify the vital, main, emergency, and power circuits in faults by nomenclature. 9.3-Maintain electrical circuits in good working and conservation conditions. 10-Operation of Energy Distribution Panels and power cables in faults 10.1-Perform safety procedures in the operation of Energy Distribution Panels. 10.2-Operate Energy Distribution Panel in combat condition. 10.3-Interpret indications of instruments of the panels of the Energy Distribution System. 10.4-Locate insulation drop, open circuit, and short circuit in Energy Distribution Panels. 10.5-Perform feeding/transfer maneuvers through panels, panels, control system consoles, and energy distribution. 10.6-Energize the main Distribution Panel bus, according to the standards and procedures recommended for the ship. 10.7-Perform load transfer and parallelism between generators. 10.8-Perform parallelism between generators and the earth energy source, in the shortest possible time for load transfer. 10.9-Manipulate the earth energy receiving cable, according to the procedures provided for the ship. 10.10-Energize the emergency distribution panel bus, according to the standards and procedures provided for the ship. 10.11-Perform safety procedures in the installation of power cables in faults. 10.12-Place power cables in faults in their respective sockets, according to the routes established in the CAV manual. 10.13-Energize vital equipment with power cables in faults, complying with onboard standards. 11-Maintenance of electric generators 11.1-Perform safety procedures for the operation of electric generators. 11.2-Operate electric generators, under normal or emergency conditions, according to the standards and procedures provided. 11.3-Perform preventive and corrective maintenance, 1st level, on electric generators. 12-Maintenance of electrical installations, equipment, and machines 12.1-Perform safety procedures for the maintenance of electrical installations, equipment, and machines. 12.2-Perform routine tests on electrical installations, equipment, and machines. 12.3-Assemble components of electrical equipment and machines, following the manufacturer's and/or Specialized Technical Directorate's guidelines and observing safety precautions. 12.4-Disassemble components of electrical equipment and machines in an orderly manner to facilitate reassembly work. 12.5-Manipulate electrical equipment and machines, according to their respective level, following the guidelines recommended by the manufacturer and/or Specialized Technical Directorate. 12.6-Validate acceptance tests for the installation of electrical equipment and machines, carried out by the manufacturer and/or Specialized Technical Directorate. 12.7-Follow safety procedures for UTR maintenance. 12.8-Perform preventive and corrective maintenance, 1st level, on UTR, coils, voltage regulators, contactor panels, and load resistance panels. 13-Maintenance of electric motors and protection and control devices 13.1-Perform safety procedures for the maintenance of electric motors and protection and control devices. 13.2-Operate electric motors, under normal or emergency conditions, according to technical standards and procedures. 13.3-Adjust brushes on collectors or collector rings of electric motors. 13.4-Clean contacts, insulating surfaces, and circuit breakers, according to the manufacturer's manuals. 13.5-Perform predictive, preventive, and corrective maintenance.
Based on the information provided, it seems like you are referring to a specific set of tasks or skills related to electrical circuits and maintenance. However, it is not clear what exactly you are asking for. Could you please provide a specific question or clarify your request?
0
0
✏️ Responder
Para escrever sua resposta aqui, entre ou crie uma conta
Compartilhar