What is the purpose of the modifications shown in Figure 29? I - Reduce shunt and A1 losses. II - Increase circuit efficiency by 2%. III - Permit ...
What is the purpose of the modifications shown in Figure 29?
I - Reduce shunt and A1 losses.
II - Increase circuit efficiency by 2%.
III - Permit A1 to function when its inputs reside at the V+ rail.
IV - Bias A1's inputs within the amplifier's common mode range.
a) I and II are correct.
b) I, III, and IV are correct.
c) II, III, and IV are correct.
d) I, II, III, and IV are correct.
I - Reduce shunt and A1 losses.
II - Increase circuit efficiency by 2%.
III - Permit A1 to function when its inputs reside at the V+ rail.
IV - Bias A1's inputs within the amplifier's common mode range.
a) I and II are correct.
b) I, III, and IV are correct.
c) II, III, and IV are correct.
d) I, II, III, and IV are correct.
Essa pergunta também está no material:
💡 1 Resposta
Ed 
A figura 29 não foi fornecida na pergunta, portanto, não é possível responder à pergunta. Por favor, forneça mais informações ou uma nova pergunta.
✏️ Responder
Para escrever sua resposta aqui, entre ou crie uma conta
Outros materiais
Compartilhar