The procedure to adjust the compass variation is as follows: 1. Locate your geographic location on the variation adjustment map and note the zone number. 2. Place the ignition switch in the N (Neutral) position. 3. Press the RESET button and hold it until 'VARIANCE = XX' is displayed on the compass. 4. Press the STEP button to advance through the zone numbers until the number corresponding to your geographic zone is displayed. 5. Press the RESET button again to enter the displayed zone number into the EVIC (Electronic Vehicle Information Center) module memory. 6. Confirm that the compass is now indicating the correct directions. Remember to follow the specific instructions provided by your vehicle's manufacturer, as the procedure may vary slightly depending on the make and model of your car.
Para escrever sua resposta aqui, entre ou crie uma conta
Compartilhar