Grátis: An administrator wants to validate the BGP connection status between the Tier-0 Gateway and the upstream physical router. What sequence of commands...

Português

Outros

An administrator wants to validate the BGP connection status between the Tier-0 Gateway and the upstream physical router. What sequence of commands could be used to check this status on NSX Edge node?
A. - enable - get vrf - show bgp neighbor
B. - get gateways - vrf - get bgp neighbor
C. - set vrf - show logical-routers - show bgp
D. - show logical-routers - get vrf - show ip route bgp

Portuguesando

há 5 meses

Portuguesando

há 5 meses

6 pág.

VMware NSX 4 X Professional V2 2V0-41 24 Questions and Answers

Respostas

há 5 meses

Para validar o status da conexão BGP entre o Tier-0 Gateway e o roteador físico upstream em um nó NSX Edge, precisamos considerar os comandos que são utilizados para verificar as informações de BGP. Vamos analisar as opções: A. - enable - get vrf - show bgp neighbor - Esta opção parece incluir comandos que podem ser relevantes, mas a sequência não é a mais comum para verificar o status do BGP. B. - get gateways - vrf - get bgp neighbor - Esta opção não parece ser a sequência correta, pois não é uma forma típica de verificar o status do BGP. C. - set vrf - show logical-routers - show bgp - Esta opção parece incluir comandos que podem ser utilizados, mas "set vrf" não é um comando típico para verificar o status. D. - show logical-routers - get vrf - show ip route bgp - Esta opção parece ser a mais adequada, pois "show logical-routers" e "show ip route bgp" são comandos que podem ser usados para verificar o status do BGP. Após analisar as opções, a resposta correta é: D. - show logical-routers - get vrf - show ip route bgp.

Essa resposta te ajudou?

Ainda com dúvidas?

Envie uma pergunta e tenha sua dúvida de estudo respondida!

Essa pergunta também está no material:

6 pág.

VMware NSX 4 X Professional V2 2V0-41 24 Questions and Answers

Mais perguntas desse material

Which three selections are capabilities of Network Topology? (Choose three.)
A. Display how the different NSX components are interconnected.
B. Display the VMs connected to Segments.
C. Display how the Physical components are interconnected.
D. Display the uplinks configured on the Tier-1 Gateways.
E. Display the uplinks configured on the Tier-0 Gateways.

An NSX administrator has deployed a single NSX Manager node and will be adding two additional nodes to form a 3-node NSX Management Cluster for a production environment. The administrator will deploy these two additional nodes and Cluster VIP using the NSX UI. What two are the prerequisites for this configuration? (Choose two.)
A. The cluster configuration must be completed using API.
B. All nodes must be in the same subnet.
C. All nodes must be in separate subnets.
D. A compute manager must be configured.
E. NSX Manager must reside on a Windows Server.

Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the Geneve protocol on the ESXi transport node? (Choose two.)
A. net-dvs
B. esxcfg-nics -I
C. esxcli network ip interface ipv4 get
D. esxcfg-vmknic -I
E. esxcli network nic list

In an NSX environment, an administrator is observing low throughput and congestion between the Tier-0 Gateway and the upstream physical routers. Which two actions could address low throughput and congestion? (Choose two.)
A. Configure ECMP on the Tier-0 gateway.
B. Configure a Tier-1 gateway and connect it directly to the physical routers.
C. Deploy Large size Edge node/s.
D. Configure NAT on the Tier-0 gateway.
E. Add an additional vNIC to the NSX Edge node.

An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events. Which message ID (msgid) should be used in the syslog export configuration command as a filter?
A. FABRIC
B. SYSTEM
C. GROUPING
D. MONITORING

Português

VMware NSX 4 X Professional V2 2V0-41 24 Questions and Answers

Respostas

Ainda com dúvidas?

Essa pergunta também está no material:

VMware NSX 4 X Professional V2 2V0-41 24 Questions and Answers

Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the Geneve protocol on the ESXi transport node? (Choose two.)A. net-dvsB. esxcfg-nics -IC. esxcli network ip interface ipv4 getD. esxcfg-vmknic -IE. esxcli network nic list

An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events. Which message ID (msgid) should be used in the syslog export configuration command as a filter?A. FABRICB. SYSTEMC. GROUPINGD. MONITORING

Mais conteúdos dessa disciplina

Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the Geneve protocol on the ESXi transport node? (Choose two.)
A. net-dvs
B. esxcfg-nics -I
C. esxcli network ip interface ipv4 get
D. esxcfg-vmknic -I
E. esxcli network nic list

An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events. Which message ID (msgid) should be used in the syslog export configuration command as a filter?
A. FABRIC
B. SYSTEM
C. GROUPING
D. MONITORING