Manual_Erros_AC-450_5765_111-210

Prévia do material em texto

ABB Automation ABB Master
5765 111-210
USER’S GUIDE
AUT/KVP 1990-06-07
DC Software error codes and system messages
Release 2.5
SUMMARY
This document describes the general principles for error reporting
in the DC Software product, and lists all error codes and system
messages that DC Software can produce.
The information in this document is subject to change without notice and should not be construed as
a commitment by ABB Industrial Systems AB. ABB Industrial Systems AB assumes no responsability for
any errors that may appear in this document.
In no event shall ABB Industrial Systems AB be liable for direct, indirect, special, incidental or
consequential damages of any nature or kind arising from use of this document, nor shall ABB
Industrial Systems AB be liable for incidental or consequential damages arising from the use of
any software or hardware described in this document.
This document and parts thereof must not be reproduced or copied without ABB Industrial Systems
AB’s written permission, and the contents thereof must not be imparted to a third party nor be used
for any unauthorized purpose.
The software described in this document is furnished under a license and may be used, copied, or
disclosed only in accordance with the terms of such a license.
Copyright ABB Industrial Systems AB 1994
5765 111-210 1(21)
ABB Automation ABB Master
CONTENTS
1 Introduction ...................................... 3
2 Using the document ................................ 4
3 Reporting errors to ABB ............................ 5
4 Error categories .................................. 6
4.1 Database access errors .......................... 6
4.2 Signal call errors .............................. 6
4.3 MMI errors ...................................... 8
4.4 Internal (other) errors ........................ 9
5 References ........................................ 21
APPENDICES
1. System messages, DCX - Common
2. System messages, DCA - Startup
3. System messages, DCB - Object handling
4. System messages, DCC - Event handling
5. System messages, DCD - Dialog
6. System messages, DCG - Report generation
7. System messages, DCH - Remote display handling
8. System messages, DCM - MMI interface
9. System messages, DCP - Presentation
10. System messages, DCS - Data subscription
11. System messages, DCT - Time tagged data handling
12. System messages, DCW - System status
5765 111-210 2
ABB Automation ABB Master
1
Introduction
This document describes the general principles for error reporting
in the DC Software product, and lists all error codes and system
messages that DC Software can produce. The purpose is to provide
information sufficient to decide whether an error is caused by
hardware failure, by mistakes in the use of DC Software or by
internal errors in DC Software.
5765 111-210 3
ABB Automation ABB Master
2
Using the document
When you receive a system message, this is how you use the
document to get all information out from it (basic information
about system message layout can be found in reference 1):
- Find out what the message type (mtype) and message code
(code) means for the particular message (only messages with
mtype 23, 24, 25 and 26 are described in this document).
This information is found in chapter 4.
- Decide which appendix to use to get more details.
The different appendices correspond to the first three
characters in the names of the tasks that sends system
messages.
Example: The system messages from the task DCPA010 are found
in appendix "System messages, DCP - Presentation".
- Look up the particular system message.
Search for the trace number from the system message in the
chosen appendix.
If you don’t find the trace number in the chosen appendix, it
can be found in the appendix "System messages, DCX - Common"
which contains system messages from common service procedures
that are called by a number of tasks.
Now you have got all information you can get out of the system
message.
5765 111-210 4
ABB Automation ABB Master
3
Reporting errors to ABB
DC Software is thoroughly tested and is believed to be correct and
reliable. However, in some cases a task may be aborted or system
messages sent caused by hardware failure, by mistakes in the use
of DC Software or by internal errors in DC Software.
If you receive a system message that indicates an error in
DC Software, please report it to ABB by contacting your supplier
of DC Software, your ABB Service organization or (if you are
famliar with it) by using the System Problem Report (SPR)
procedure. Be sure to include all information about the problem
that you have available.
5765 111-210 5
ABB Automation ABB Master
4
Error categories
Errors in a DC Software system are divided into four basic
categories, database access errors, signal call errors, MMI errors
and internal (other) errors. The four categories have different
message types (mtype) and each message type has a number of
different message codes.
4.1
Database access errors
A database access error is an error that affects only a limited
part of the system, such as a task that reads/writes information
from/to a database concept. When such an error occurs the task
normally cancels the current operation, reports the error with a
system message and continues with the next operation.
DATABASE ACCESS ERRORS
mtype = 23
code = error code (acb.ccode) from the database accessor (see
reference 2)
task = task name
address = trace number
data_1 = database index
data_2 = database property (may be omitted)
If the task has exception handling for czdberr, code = value from
the routine cxsyserr. See reference 3.
4.2
Signal call errors
A signal call error is an error that affects only a limited part
of the system, such as a task that sends/receives a signal to/from
another task. When such an error occurs the task normally cancels
the current operation, reports the error with a system message and
continues with the next operation.
SIGNAL CALL ERRORS
mtype = 24
code = see below
task = task name
address = trace number
data_1 = see below
data_2 = see below
When mtype = 24 the following codes exist, where data_1 and data_2
have different meanings depending on the value of code.
5765 111-210 6
ABB Automation ABB Master
code meaning
1 There is a signal identity which can not be recognized.
data_1 = signal identity
data_2 = -
2 There is a MMI number which can not be recognized.
data_1 = signal identity
data_2 = MMI number
3 There is a reference (object) type which can not be
recognized.
data_1 = signal identity
data_2 = reference type
4 There is a picture priority in the "new_pic" signal which
can not be recognized.
data_1 = signal identity
data_2 = picture priority
5 The memory space for allocation of the signal queue block
was not available within the system defined timeout time
(the channel is "full"). The signal has not been sent.
data_1 = signal identity
data_2 = port number
6 There is a status group number in the "analys_1" signal
which can not be recognized.
data_1 = signal identity
data_2 = status group
7 There is an operation code in the "order" signal which can
not be recognized.
data_1 = operation code
data_2 = -
8 There is an operation property in the "order" signal which
can not be recognized.
data_1 = operation property
data_2 = operation code
9 No response has been received in a SENDW call.
data_1 = signal identity
data_2 = -
10 There is a function code in the signal from the PD handler
which can not be recognized.
data_1 = signal identity
data_2 = function code
5765 111-210 7
ABB Automation ABB Master
11 There is a field number in the signal from the PD handler
which can not be recognized.
data_1 = signal identity
data_2 = field number
12 Write channel to PD handler is too short for the action
routine to send on. The signal has not been sent.
data_1 = database index
data_2 = PD bus number
13 There is a PD bus number in the record which can not be
recognized. The signal has not been sent by the action
routine.data_1 = database index
data_2 = PD bus number
14 The memory space for allocation of the signal queue block
was not available within the system defined timeout time
(the channel to the PD handler is "full"). The signal has
not been sent by the action routine.
data_1 = database index
data_2 = PD bus number
15 There is a parameter error in a DSX signal.
data_1 = signal identity
data_2 = ORD(syserr)
16 There is a network number and/or node number which can not
be recognized.
data_1 = signal identity
data_2 = network number, node number
17 There is a signal priority which can not be recognized.
data_1 = signal identity
data_2 = signal priority
18 There is a part signal which is missing.
data_1 = part signal number
data_2 = -
4.3
MMI errors
A MMI error is an error that affects only a limited part of the
system, such as a MMI input/output on a communication link. When
such an error occurs the task normally cancels the current
operation, reports the error with a system message and continues
with the next operation.
MMI ERRORS
5765 111-210 8
ABB Automation ABB Master
mtype = 25
code = see below
task = task name
address = trace number
data_1 = see below
data_2 = see below
When mtype = 25 the following codes exist, where data_1 and data_2
have different meanings depending on the value of code.
code meaning
1 There is a TU number (display channel, keyboard, printer
or hard copy unit) which can not be recognized.
data_1 = TU number
data_2 = MMI number
2 Data block is not accepted due to a temporary lack of
read/write memory in Tesselator.
data_1 = 0
data_2 = 0
3 Data block is not accepted due to a temporary lock of
buffer space in Tesselator.
data_1 = TU number (if valid, else 0)
data_2 = MMI number
4 The TU has been reserved for the exclusive use of another
host computer.
data_1 = TU number
data_2 = MMI number
5 The communication link to Tesselator has failed.
data_1 = TU number
data_2 = 0
6 The Watchdog command (define or enable) has failed.
data_1 = command
data_2 = 0
4.4
Internal (other) errors
An internal (other than the earlier mentioned) error is an error
that affects only a limited part of the system, such as a task
with internal parameters and procedure calls. When such an error
occurs the task normally cancels the current operation, reports
the error with a system message and continues with the next
operation.
INTERNAL (OTHER) ERRORS
5765 111-210 9
ABB Automation ABB Master
mtype = 26
code = see below
task = task name
address = trace number
data_1 = see below
data_2 = see below
When mtype = 26 the following codes exist, where data_1 and data_2
have different meanings depending on the value of code.
code meaning
1 There is an illegal input parameter in an internal
procedure call.
data_1 = parameter value
data_2 = -
2 There is an illegal output parameter in an internal
procedure call.
data_1 = parameter value
data_2 = -
3 There is an illegal parameter in the task parameter area.
data_1 = parameter value
data_2 = -
4 There is a communication link error.
data_1 = status from the data link procedure (see
reference 4)
data_2 = MMI number
5 There is a BUFMAN error.
data_1 = status from the BUFMAN procedure (see reference 4)
data_2 = MMI number
6 There is a table index which is out of range.
data_1 = table index
data_2 = expected table index
7 There is a reference (object) type which is out of range.
data_1 = database index in DYNAMIC_PART_DES
data_2 = member number
8 There is a member number which is out of range.
data_1 = database index in DYNAMIC_PART_DES
data_2 = member number
9 There is a database reference which is not allowed in this
object display.
5765 111-210 10
ABB Automation ABB Master
data_1 = database index
data_2 = reference type, network number, node number
10 There is a database reference which is not allowed in this
data transfer program.
data_1 = database index
data_2 = reference type
11 There is a database access type which is not implemented.
data_1 = access type
data_2 = reference type
12 The maximum time out time has expired.
data_1 = -
data_2 = -
13 There is a request type which is not implemented.
data_1 = request type or operation code
data_2 = - or operation property
14 There is a format reference missing in the database.
data_1 = database index
data_2 = property number
15 There is a database instance which is not implemented.
data_1 = database index
data_2 = reference type
16 There is a data type which is not implemented.
data_1 = data type
data_2 = -
17 There is an illegal reference address.
data_1 = reference address
data_2 = -
18 There is an incorrect TTD request.
data_1 = TTD request status
data_2 = reference type
19 There is an error when calling the volume handler.
data_1 = database index
data_2 = ORD(volume_op), ORD(mmh_stat)
(volume_op : volop)
(mmh_stat : stat )
20 There is a difference between real size of opened MM and
expected size.
5765 111-210 11
ABB Automation ABB Master
data_1 = database index in TTD_MM_ADM or TTD_NODE
data_2 = -
21 There is a built database property which has been changed.
data_1 = database index
data_2 = member number, property number
(member may be = 0 if not defined)
22 There is an incorrect time on TTD MM or PM.
data_1 = database index
data_2 = -
23 The maximum TTD log number has been exceeded.
data_1 = log number
data_2 = -
24 There is a specified list element which can not be found.
data_1 = log number
data_2 = ORD(log_type), ORD(treatment)
(log_type : dctlog_type)
(treatment : dcttreatment)
25 The maximum number of members has been exceeded.
data_1 = database index
data_2 = property number, member number
26 There has been a try to use a not defined reference type.
data_1 = database index in TTD_LOG_DESCR
data_2 = member number, reference type
27 There has been a try to access a not defined reference
type concept.
data_1 = database index in TTD_LOG_DESCR
data_2 = member number, reference type
28 There is an error when trying to get property number.
data_1 = reference type
data_2 = -
29 There is a fatal error in a built property.
data_1 = database index in TTD_LOG_DESCR
data_2 = member number, property number
30 The subscriber address table is full.
data_1 = network number, node number of subscriber
data_2 = function identity of subscriber
5765 111-210 12
ABB Automation ABB Master
31 There is a variable index which is out of range.
data_1 = log number
data_2 = variable index
32 There is a TTD value type which can not be recognized.
data_1 = value type
data_2 = -
33 There is an error in the treatment of a variable.
data_1 = database index in TTD_LOG_DESCR
data_2 = variable number (member number)
34 ’Status’ is separated from ’dctdrqok’.
data_1 = database index in TTD_LOG_DESCR
data_2 = variable number (member number), status
35 The requested logging time is not synchronized with the
oldest time on the mass memory segment.
data_1 = database index in TTD_MM_ADM
data_2 = -
36 The maximum number of allowed MMI units has been exceeded.
data_1 = MMI number
data_2 = maximum number of allowed MMI:s
37 There is an incorrect counter in TTD_LOG_DESCR or in the
number of OK samplings.
data_1 = log number, variable number
data_2 = counter, number of OK samplings
38 Channel identity = 0 was returned from the
DcGetChannelIndex procedure.
data_1 = function identity
data_2 = -
39 There is a subscription type which can not be recognized.
data_1 = subscription type
data_2 = reference type
40 There is a variable index which can not be recognized.
data_1 = database index in TTD_LOG_DESCR
data_2 = variable of log, variable index
41 It is not possible to access the specified variable index.
data_1 = database index in TTD_LOG_DESCR
data_2 = variable of log, specified variable index
5765 111-210 13
ABB Automation ABB Master
42 The referenced TTD variable is not implemented.
data_1 = database index in TTD_LOG_DESCR
data_2 = variable in log
43 The referenced TTD variable is not initiated.
data_1 = database index in TTD_LOG_DESCRdata_2 = variable of log
44 There is a node which is not properly initiated.
data_1 = network number
data_2 = node number
45 There are log numbers which can not be recognized.
data_1 = database index of dependent log
data_2 = database index of referenced log
46 The sampel interval of the dependent log does not match
the log interval of the referenced log.
data_1 = database index of dependent log
data_2 = database index of referenced log
47 The referenced log is user log.
data_1 = database index of referenced log
data_2 = property
48 The referenced log is backup log.
data_1 = database index of referenced log
data_2 = property
49 There is information in the database which is not allowed.
data_1 = database index
data_2 = member number (if any)
50 The number of subscribers for events is out of range
(maximum = 16).
data_1 = network number and node number
data_2 = MMI number (for display terminals)
= 0 (for audible alarms)
= task number + 1 (for printers)
51 The number of nodes is out of range.
data_1 = network number and node number
data_2 = maximum number of nodes
52 The number of texts is out of range.
data_1 = network number and node number of subscriber
data_2 = MMI number of subscriber
5765 111-210 14
ABB Automation ABB Master
53 The number of allowed MMI units has been exceeded.
data_1 = MMI number
data_2 = number of allowed MMI:s
54 There is a list type which can not be recognized.
data_1 = list type
data_2 = MMI number
55 The referenced property is of a data type which can not be
recognized.
data_1 = database index
data_2 = property number, ORD(czdatatype)
56 There is bad values in the transfer to the mass memory
volume.
data_1 = database index in TTD_LOG_DESCR
data_2 = -
57 There is an incorrect file reference for backup.
data_1 = file number
data_2 = -
58 There is no log in database to restore backup.
data_1 = database index
data_2 = -
59 There is a status error in backup.
data_1 = status
data_2 = -
60 There is a member which can not be found.
data_1 = member number
data_2 = -
61 The backup unit is full.
data_1 = -
data_2 = -
62 The information in the "data_request" signal is illegal.
data_1 = MMI number
data_2 = member number of subscription information
63 There is a data request on a not existing or mismatched
subscription.
data_1 = network number, node number, MMI number, m_ref
if trace number = 7946
else MMI number
5765 111-210 15
ABB Automation ABB Master
data_2 = network number, node number, MMI number, m_ref
if trace number = 7946
else list type
64 The signal transfer during display creation is not in
sequence.
data_1 = MMI number
data_2 = list type
65 There is no acknowledge signal from MasterView.
data_1 = database index of alarm instance
data_2 = network number and node number of MasterView
66 The number of references for dependent logged variables is
exceeded.
data_1 = log number of calling log,
log number of referenced log
data_2 = variable index of calling variable,
variable index of referenced variable
67 The next cyclic backup will fail. MM is full.
data_1 = log number
data_2 = time for next cyclic backup
68 The cyclic backup failed. MM is full.
data_1 = log number
data_2 = -
69 Warning. The MM is missing.
data_1 = -
data_2 = -
70 Failed. The MM is missing.
data_1 = log number
data_2 = -
71 There is an incorrect node index in the buffer link list.
data_1 = buffer start index
data_2 = buffer end index
72 There is an error when trying to send subscription request
to MasterPiece.
data_1 = -
data_2 = -
73 There is an error in the buffer status.
data_1 = node index
data_2 = -
5765 111-210 16
ABB Automation ABB Master
74 There is an error in the page request handling.
data_1 = direction
data_2 = -
75 There is an error in row number.
data_1 = network number, node number, value
data_2 = -
76 There is a dependent logging from the own log.
data_1 = database index in TTD_LOG_DESCR
data_2 = variable index of calling variable,
variable index of referenced variable
77 The MasterPiece is not updated in the MASTERPIECE_DESC
concept.
data_1 = network number and node number of MasterPiece
data_2 = -
78 Database locking with procedure CXLOCK failed. It is
already locked.
data_1 = database index in TTD_LOG_DESCR
data_2 = array of already locked concepts
1 = TTD_LOG_DESCR
2 = TTD_PM_ADM
3 = TTD_MM_ADM
4 = TTD_BACKUP
79 There is no list element found in the free pool.
data_1 = pointer to the free pool
data_2 = -
80 There is no list element found in the function list when
trying to create a list printout subscription.
data_1 = pointer to the function list
data_2 = subscription type
81 There is no list element found in the function list when
trying to create a page number subscription.
data_1 = pointer to the list subscription
data_2 = subscription MMI number
82 There is no list element found in the function list when
trying to update a list printout subscription.
data_1 = pointer to the list printout subscription
data_2 = subscription type
83 There is an error in the pointer to the last presented
event.
5765 111-210 17
ABB Automation ABB Master
data_1 = pointer to the function list
data_2 = subscription type
84 There is no active subscription list element found when
trying to update the active subscription list.
data_1 = pointer to the active subscription list
data_2 = pointer to the subscription data node
85 There is no printout subscription found.
data_1 = pointer to the active subscription list element
data_2 = pointer to the subscription data node
86 There is no hash table for the function list.
data_1 = pointer to the function list
data_2 = -
87 There is an incorrect type of list requested.
data_1 = type of list
data_2 = -
88 There is an incorrect sort of list requested.
data_1 = sort of list
data_2 = -
89 There is no resource found when trying to allocate
resource for a new event.
data_1 = sort of list
data_2 = pointer to the free pool
90 There is no demand list subscription found for this MMI.
data_1 = MMI number
data_2 = type of list
91 There is an error in the acknowledge request.
data_1 = pointer to the subscription list head
data_2 = line number
92 There is no object reference found in the input signal.
data_1 = object reference
data_2 = -
93 There is a subscription type which can not be recognized.
data_1 = subscription type
data_2 = -
94 There is a function list type which can not be recognized.
data_1 = function list type
data_2 = -
5765 111-210 18
ABB Automation ABB Master
95 It is not possible to allocate more subscription data
nodes.
data_1 = pointer to the free subscription list
data_2 = pointer to the active subscription list
96 There is no active list subscription for this MMI.
data_1 = MMI number
data_2 = -
97 There is an incorrect printerflag value for the list
printout subscription.
data_1 = printerflag value
data_2 = -
98 There is an incorrect type of resource to be allocated.
data_1 = type of resource
data_2 = -
99 The page request data and the active list subscription do
not correspond.
data_1 = MMI number
data_2 = -
100 There is an error trying to activate a task.
data_1 = -
data_2 = -
101 There is a text type which can not be recognized.
data_1 = text type
data_2 = -
102 There is an error in an input parameter or in the hash
list.
data_1 = pointer to the hash table
data_2 = pointer to the list element
103 There is an error in the data structure for a subscription
when trying to present data.
data_1 = pointer to the subscription data
data_2 = pointer to the subscription list
104 There is a mass memory error during backup.
data_1 = network number and node number
data_2 = log number
105 There is an error during Winchester initialization.
data_1 = -
data_2 = -
5765 111-210 19
ABB Automation ABB Master
106 The free list for the hashtable in group_alarm is empty.
data_1 = -
data_2 = -
107 No element is found in the group_alarm hashtable with
specified database index and hash index.
data_1 = database index
data_2 = hash index108 Timeout is received from symbol handling when translating
an object name.
data_1 = -
data_2 = -
109 There is a channel identity = 0 when sending a ’data 1’
type of order.
data_1 = type of order
data_2 = reference type for the channel index
110 Order is not allowed since the corresponding flag in
ORDER_BLOCK is set.
data_1 = -
data_2 = -
111 Order is not allowed since MEMB_COUNTER is not 0 or system
is not in configuration mode.
data_1 = -
data_2 = -
112 There is an error in group_alarm:s disturbance counter.
data_1 = disturbance counter
data_2 = -
113 There is a port number in the input signal which is not
allowed.
data_1 = port number
data_2 = -
114 The position is already occupied in the access table.
data_1 = mmi number
data_2 = database index of the new reference
115 There is an erroneous signal number (m_code) in the signal.
data_1 = database index of the reference
data_2 = signal number
5765 111-210 20
ABB Automation ABB Master
5
References
1. 5761 0001-300 SYSTEM MESSAGES AND HALT ERROR CODES
Asea MasterBase SW
2. 5761 0001-371 DS 101DB DATA BASE SERVICES USER’S GUIDE
Asea MasterBase SW
3. 5761 0001-40 DS 101CX SYSTEM SERVICES USER’S GUIDE
Asea MasterBase SW
4. 5750 012-41 MASTERNET
APPLICATION PROGRAMMER’S REFERENCE MANUAL
5765 111-210 21
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1988−05−03 Appendix 1
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
NOTE This trace number is used twice
00020001 DCXB02 get phys point
1:acb.ccode cxfind call failed
2:db index when accessing
3:− DIALOG TABLE
00020001 DCXB02 Get_phys_ 1: acb.ccode Nohit in cxfind when the
point 2: physical pointer to
3: PRESENTATION_TAB is
fetched
NOTE This trace number is used twice
00020002 DCXB02 get phys point
1:acb.ccode cxgetpby call failed
2:db:index when accessing
3:− DIALOG TABLE
00020002 DCXB02 Get_phys_ 1: acb.ccode Nohit in cxgetphy when
point 2: the physical pointer to
3: PRESENTATION_TAB is
fetched.
00030001 DCXB03 phys_point_ 1: acb.ccode Nohit in cxgetphy when
tab 2: dbindex the physical pointers to
3: SYMBOL_/COLOUR_CONTROL_T
is fetched
05200001 DCXB20 1: dc$format the specified property is
2: RefAddr not accessible on the
3: PropNo base level
05200002 DCXB20 1: dc$format the specified property is
2: RefAddr of grouptype
3: PropNo
05200003 DCXB20 1: dc$format specified property is n
2: RefAddr external reference
3: PropNo
05200004 DCXB20 1: dc$format specified property
2: RefAddr is a format reference
3: PropNo
00400518 DCXB40 dcxbpdba 1: ord (cxsyserr) Hard data base error
2: data base ref.(hex) when accessing
3: concept no. interface file
00400519 DCXB40 dcxbpdba 1: acb.ccode Nohit on cxfind of
2: data base ref.(hex) interface record
3: concept no.
00420001 DCXB42 dcxbsend 1: dc$full_q Full queue on send
2: signal_id to MView−node.
3: channel_index (dec)
1(3)
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1988−05−03 Appendix 1
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
00420002 DCXB42 dcxbsend 1: dc$com_err Illegal netw,node
2: signal_id on call at cxesend.
3: dest netw/node(hex)
00420003 DCXB42 dcxbsend 1: dc$pri_err Priority error on
2: signal_id call to cxesend.
3: sign. prio (dec)
00420004 DCXB42 dcxbsend 1: dc$parerr Parameter error on
2: signal_id call to cxesend.
3: ORD(syserr) (dec)
00420005 DCXB42 dcxbnsen 1: dc$full_q Full queue on send
2: signal_id to MView−node.
3: channel_index (dec)
00420006 DCXB42 dcxbnsen 1: dc$parerr Parameter error on
2: signal_id call to cxesend.
3: ORD(syserr) (dec)
00420016 DCXB42 dcxbsend 1: dc$ParErr Parameter error on
2: signal_id call to cxesend
3: ord (cxsyserr)
00440003 DCXB44 dcxbchnn 1: ord (cxsyserr) Error on cxfind of
2: concept no. dynamic part descr.
3: data base ref.(hex)
00440004 DCXB44 dcxbchnn 1: acb.ccode Nohit on find
2: concept no. dynamic part descr.
3: data base ref.(hex)
00440005 DCXB44 dcxbchnn 1: acb.ccode Nohit on cxpath−
2: property no. for member for dynamic
dynamic element element
3: member no.
00440006 DCXB44 dcxbchnn 1: acb.ccode Nohit on cxnomember
2: property no. for for dynamic element
dynamic element
3: −
00501001 DCXB50 tpdcnain 1: acb.ccode Nohit on cxfind
2: − for TTD_PROP_DES
3: −
00501003 DCXB50 tpdcnain 1: acb.ccode Nohit on cxfree
2: − for TTD_PROP_DES
3: −
0050100A DCXB50 tpdcnain 1: acb.ccode Nohit on cxget
2: − for TTD_PROP_DES
3: −
2
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1988−05−03 Appendix 1
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
00502001 DCXB50 tpdcprin 1: acb.ccode Nohit on cxfind
2: − for TTD_PROP_DES
3: −
00502003 DCXB50 tpdcprin 1: acb.ccode Nohit on cxfree
2: − for TTD_PROP_DES
3: −
0050200A DCXB50 tpdcprin 1: acb.ccode Nohit on cxget
2: − for TTD_PROP_DES
3: −
00503001 DCXB50 tpdcnapr 1: acb.ccode Nohit on cxfind
2: − for TTD_PROP_DES
3: −
00503003 DCXB50 tpdcnapr 1: acb.ccode Nohit on cxfree
2: − for TTD_PROP_DES
3: −
0050300A DCXB50 tpdcnapr 1: acb.ccode Nohit on cxget
2: − for TTD_PROP_DES
3: −
00504001 DCXB50 tpdcprna 1: acb.ccode Nohit on cxfind
2: − for TTD_PROP_DES
3: −
00504003 DCXB50 tpdcprna 1: acb.ccode Nohit on cxfree
2: − for TTD_PROP_DES
3: −
0050400A DCXB50 tpdcprna 1: acb.ccode Nohit on cxget
2: − for TTD_PROP_DES
3: −
00505002 DCXB50 tpdminfo 1: acb.ccode Nohit on cxfindl
2: − for TTD_PROP_DES
3: −
00505003 DCXB50 tpdminfo 1: acb.ccode Nohit on cxfree
2: − for TTD_PROP_DES
3: −
00505007 DCXB50 tpdminfo 1: acb.ccode Nohit on cxmod
2: − for TTD_PROP_DES
3: −
3
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1989−11−14 Appendix 2
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
00020001 dcab01 sub 1: dc$full_q Instance for TTD−
2: sgnl.msg.id backup disp. does
3: 0 not exist.
00020002 dcab01 sub 1: acb.ccode Error in winchester
2: − name or winchester
3: − not implemented in
system.
00030001 DCAB02 Option2 1: acb.ccode Prop name =
2: − ’REM_TYP’ not
3: − found in conc
MMI_TEXT
00030002 DCAB02 Option2 1: acb.ccode Concept
2: − MMI_TEXT not
3: − found in data
base
00030003 DCAB02 Option2 1: dc$act_task_err Task DCHA01
2: − can’ be
3: − activated
00030004 DCAB02 Option2 1: dc$act_task_err Task DCHA02
2: − can’ be
3: − activated
00030005 DCAB02 Option2 1: dc$act_task_err Task DCHA91
2: − can’ be
3: − activated
00030006 DCAB02 Option2 1: dc$act_task_err Task DCHA92
2: − can’ be
3: − activated
00030007 DCAB02 Option2 1: acb.ccode Member 3 in
2: − prop dialog
3: − operation not
found in conc
dialog_operati
00030008 DCAB02 Option2 1: acb.ccode prop dialog_el
2: − not found in
3: − conc dialog_
operation
00030009 DCAB02 Option2 1: acb.ccode concept dialog
2: − operation inst
3: − rem_send_nam
not found
1(1)
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
22 DCBBB4 dcbbbdebl 1: 0 Error on call to pdc−
2: errorcode routine for status
returned from check.
cxpc55sc (dec)
3: s_ref (logical
record no in
database) (doc)
23 DCBBB4 dcbbbschk 1: 0 Error on call to pdc−
2: errorcode routine for status
returned from check.
cxpc55sc (dec)
3: s_ref (reg
record no in
database) (doc)
24 DCBBB7 dcbbbuack 1: 0 Illegal operation
2: opprop property in order
3: − signal.
25 DCBBB5 dcbbbvcha 1: 0 Error on call to pdc−
2: errorcode routine for value
returned from change.
cxpc55ne (dec)
3: s_ref (logical
record no in
database) (doc)
26 DCBBB5 limit 1: 0 Error on call to pdc−
processing 2: errorcode routine for extended
returned from handling.
cxpc55ex (dec)
3: s_ref (logical
record no in
database) (doc)
27 DCBBB4 dcbbbblck 1: 0 Error on call to pdc−
2: errorcode routine for block
returned from operation.
cxpc55bl(dec)
3: s_ref (logical
record no in
database) (doc)
28 DCBAB0 main 1: 0 Illegal function
2: ord(func code)(dec) code in trans. from
3: (not used) pd_handler.
29 DCBBB2 dcbbbclpa 1: acb.ccode Error on cxfind−call
2: (not used) during ’clear
3: (not used) persistant’ operation.
1(29)
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
2A DCBBB0 dcbbborder 1: 0 Illegal logical file
2: refadr (dbind)hex no in order trans.
3: (not used)
2B DCBBB9 service 1: acb.ccode Error on cxfind−call
2: ai refadr (dbind) during ai interface
(hex) in service/out of
3: (not used) service operation
2C DCBBB9 service 1: 0 Error on status check
2: ord(error) from call during ai_
cxpc55sc (dec) interface in_service
3: recordno in ai /out of service
file (dec) operation
2D DCBBB9 dcbbbifis 1: 0 Error on call to
2: ord (error) from cxpc5is
cxpc59is (dec)
3: record no in ai
interface (dec)
2E DCBBB9 dcbbbifos 1: 0 Error on call to
2: ord (error) from cxpc5os
cxpc59os (dec)
3: record no in ai
interface (dec)
2F DCBBB4 dcbbbdebl 1: 0 Error on call to cxpc5db
2: ord (error) from 30 is missing
cxpc55db (dec)
3: record no in ai
file (dec)
31 DCBAB0 main 1: 0 Error returned from
2: 0 dcbbfile_no for AI.
3: 0 (precedes cxabort−
call)
32 DCBAB0 main 1: 0 Error returned from
2: (not used) dcbbfile no for ai
3: (not used) interface (precedes
cxabort−call)
35 DCBBB0 dcbbborder 1: dc$opcode Illegal operation code
2: operation code on precessing of ai
(dec) orders
3: (not used)
36 DCBBB0 dcbbborder 1: dc$opcode Illegal operation code
2: operation code while processing ai−
(dec) interface orders
3: (not used)
2
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
37 DCBBB4 dcbbbblck 1: dc$opprop Illegal operation
2: operation property property while processing
(dec) block request on a
3: operation code(dec)
38 DCBBB4 dcbbbdebl 1: dc$opprop Illegal operation
2: operation property property while processing
(dec) deblock request on ai
3: operation code(dec)
39 DCBBB5 dcbbbvcha 1: dc$opprop Illegal operation
2: operation property while processing
property (dec) value−change request
3: operation code(dec) on ai.
3A DCBBB7 dcbbbackn 1: 0 Illegal operation
2: opprop property in order
3: − signal.
83 DCBBB1 valid 1: 1 Inproper position flag
position 2: 0 − old status in p2 for analog signal
1 − new status in p3
3: status field in
incoming trans
86 DCBAB0 main 1: 0 unknown signal id
2: in sigid (dec)
3: (not used)
87 DCBAD0 main 1: 0 unknown signal id
2: in sigid (dec)
3: (not used)
88 DCBAD0 main 1: 0 Illegal func code in
2: ord (func code) pd−trans
3: (not used)
89 DCBBB1 dcbbbanl1 1: 0 Object not implemented
2: dbref (hex)
3: (not used)
90 DCBBD1 dcbbdanl1 1: 0 Object not implemented
2: dbref (hex)
3: (not used)
94 DCBBEL dcbbeanll 1: dc$not impl Object not implemented
2: data base ref.
3: dout dcx
95 DCBBE2 dcbbeclr3 1: acb.ccode Data base error in fin l
2: not used call during clear persist
3: not used operation
3
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
101 DCBAI0 main 1: dc$sigid illegal signal id
2: signal id
3: 0
102 DCBAI0 main 1: acb.ccode error when getting file
2: 0 number
3: 0
103 DCBAI0 main 1: dc$not impl object not implemented
2: dbind
3: referencetype
105 DCBAI0 dcbbihandle 1: dc$opcode illegal operation code
2: operation code
3: 0
107 DCBBI6 dcbbi_dyn_pr 1: dc$inp_param illegal parameter
2: event property (event property)
3: 0
109 DCBAI0 get_tf_ev_pr 1: dc$inp_param illegal parameter
2: bit no in newstatus (typefault)
3: 0
111 DCBAI0 get_seqind_p 1: dc$inp_param illegal parameter
2: bit no in newstatus (seqind)
3: 0
113 DCBAI0 dcbbianalys 1: dc$format disturbance built in
2: dbind data base but not type
3: property no of fault
missing format
115 DCBAI0 dcbbianalys 1: dc$statgrp illegal status group
2: signal id
3: status group no
117 DCBAI0 dcbbianalys 1: dc$format Load database.
2: dbind Access of texts
3: property no of failed in concept
missing format SEQ_CTRL.
121 DCBBI0 perform_mord 1: dc$opprop illegal operation
2: opprop property
3: opcode
123 DCBBI0 perform_mord 1: dc$opprop illegal operation
2: opprop property
3: opcode
125 DCBBI0 perform_mord 1: dc$opprop illegal operation
2: opprop property
3: opcode
4
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
127 DCBBI0 manual_order 1: dc$opprop illegal operation
2: opprop property
3: opcode
131 DCBBI3 dcbbi_sproev 1: dc$inp_param illegal parameter
2: signal id (signal−id)
3: 0
141 DCBBI4 dcbbiset_una 1: dc$opprop illegal operation
2: opprop property
3: opcode
143 DCBBI4 dcbbireset−u 1: dc$opprop illegal operation
2: opprop property
3: opcode
151 DCBBI5 al_blk_deblk 1: dc$typ_of_req typ of req <> operator
2: type of requester in block order for pos
3: 0 alarm or seqind alarm
153 DCBBI5 al_blk_deblk 1: dc$typ_of_req typ of req <> operator in
2: type of requester deblock order for os
3: 0 alarm or seqind alarm
155 DCBBI5 dcbbiblock_d 1: dc$format disturbance built in
2: dbind database but not type−
3: property_no of type− fault
fault
157 DCBBI5 dcbbiblock_d 1: dc$opprop illegal operation
2: opprop property
3: opcode
161 DCBBI6 dcbbiev_text 1: dc$inp_param illegal parameter
2: event reason (event reason or event
3: event property property)
201 DCBAH0 1: 1 Illegal signal
2: signal id identity received
3: not used
202 DCBAH0 treat_order 1: 7 Illegal operation
2: opcode code received in
3: not used order signal
203 DCBAH0 treat_ − 1: 6 Illegal status
analys_1 2: analys_1 group in analys_1
3: statgrp signal
204 DCBAH0 treat_ − 1: 15 Analys_1 signal to
analys_1 2: lf,lr an object which is
3: controller_dcx indicated not impl.
5
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
205 DCBAH0 initialize 1: 2 Get concept call
2: conc. no failed, task is
3: logical file aborted
207 DCBAH0 initialize 1: acb.ccode Grave database
2: not used error, task is
3: not used aborted
208 DCBBH1 dcbbhset_ 1: 8 Illegal operation
unack 2: opprop property received in
3: opcode order signal
209 DCBBH1 dcbbhreset_ 1: 8 Illegal operation
unack 2: opprop property received in
3: opcode order signal
20A DCBBH2 dcbbhblock_ 1: 8 Illegal operation
deblock 2: opprop property received in
3: opcode order signal
20B DCBBH3 dcbbhvalue_ 1: 8 Illegal operation
2: opprop property received in
3: opcode order signal
20C DCBBH3 output 1: 7 Illegal operation
2: opcode code received in
3: not used order signal
20D DCBBH3 setpoint 1: 7 Illegal operation
2: opcode code received in
3: not used order signal
20E DCBBH5 dcbbhalarm 1: 1 Illegal input
2: ev_reason parameter
3: not used
20F DCBBH5 dcbbhalarm 1: 1 Illegal input
2: ev_prop parameter
3: not used
211 DCBAJ0 1: 1 Illegal signal
2: signal id identity received
3: not used
212 DCBAJ0 treat_order 1: 7 Illegal operation
2: opcode code received in
3: not used order signal
213 DCBAJ0 treat_ − 1: 6 Illegal status
analys_1 2: analys_1 group in analys_1
3: statgrp signal
6
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
214 DCBAJ0 treat_ − 1: 15 Analys_1 signal to
analys_1 2: lf,lr an object which is
3: manual_stn_dcx indicated not impl.
215 DCBAJ0 initialize 1: 2 Get conceptcall
2: conc. no failed, task is
3: logical file aborted
217 DCBAJ0 initialize 1: acb.ccode Grave database
2: not used error, task is
3: not used aborted
218 DCBBJ1 dcbbjset_ 1: 8 Illegal operation
unack 2: opprop property received in
3: opcode order signal
219 DCBBJ1 dcbbjreset_ 1: 8 Illegal operation
unack 2: opprop property received in
3: opcode order signal
21A DCBBJ2 dcbbjblock_ 1: 8 Illegal operation
deblock 2: opprop property received in
3: opcode order signal
21B DCBBJ3 dcbbjvalue_ 1: 8 Illegal operation
2: opprop property received in
3: opcode order signal
21C DCBBJ3 output 1: 8 Illegal operation
2: opcode code received in
3: not used order signal
21D DCBBJ3 dcbbjalarm 1: 1 Illegal input
2: ev_reason parameter
3: not used
21E DCBBJ5 dcbbjalarm 1: 1 Illegal input
2: ev_reason parameter
3: not used
221 DCBAK0 1: 1 Illegal signal
2: signal id identity received
3: not used
222 DCBAK0 treat_order 1: 7 Illegal operation
2: opcode code received in
3: not used order signal
223 DCBAK0 treat_ − 1: 6 Illegal status
analys_1 2: analys_1 group in analys_1
3: statgrp signal
7
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
224 DCBAK0 treat_ − 1: 15 Analys_1 signal to
analys_1 2: lf,lr an object which is
3: ratio_stn_dcx indicated not impl.
225 DCBAK0 initialize 1: 2 Get concept call
2: conc. no failed, task is
3: logical file aborted
227 DCBAK0 initialize 1: acb.ccode Grave database
2: not used error, task is
3: not used aborted
228 DCBBK1 dcbbkset_ 1: 8 Illegal operation
unack 2: opprop property received in
3: opcode order signal
229 DCBBK1 dcbbhreset_ 1: 8 Illegal operation
unack 2: opprop property received in
3: opcode order signal
22A DCBBK2 dcbbkblock_ 1: 8 Illegal operation
deblock 2: opprop property received in
3: opcode order signal
22B DCBBK3 dcbbkvalue 1: 8 Illegal operation
2: opprop property received in
3: opcode order signal
22C DCBBK3 output 1: 7 Illegal operation
2: opcode code received in
3: not used order signal
22D DCBBK3 ratio 1: 7 Illegal operation
2: opcode code received in
3: not used order signal
22E DCBBK5 dcbbkalarm 1: 1 Illegal input
2: ev_reason parameter
3: not used
22F DCBBK5 dcbbkalarm 1: 1 Illegal input
2: ev_prop parameter
3: not used
231 DCBBH7 dcbbdupolled 1: 11
2: signal id
3: field nummer
232 DCBBH7 dcbbdupolled 1: 15 Du_anl_1 signal
2: signal id to a not implemented
3: ref type object
8
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
25A DCBBD0 dcbbdorder 1: 0 Ref.fileno is either
2: ref.dbref l_file or l_file−
3: not used interface.
25B DCBBD9 dcbbdifis 1: 0 Error reported from
2: ord (error) cxpc44is (updating of di_
3: logrecord number interface file)
25C DCBBD9 dcbbdifos 1: 0 Error reported from
2: ord (error) cxpc44os (updating of
3: logrecord number di_interface file)
25D DCBBD9 service 1: dc$db_err Nohit, but not end_of_
2: data base index file, when accessing
3: errorcode(acb.ccode) record in di_file
25E DCBBD9 service 1: dc$other_err Error reported from
2: ord (error) cxpc42sc (performing
3: record number status check)
25F DCBBD4 dcbbdblck 1: 0 Error reported from
2: ord (error) cxpc42bl
3: record number (<>czpcillegal)
260 DCBBD4 dcbbddebl 1: 0 Error reported from
2: ord (error) cxpc42db
3: data base index (<>czpcillegal)
261 DCBBD4 dcbbddebl 1: 0 Error reported from
2: ord (error) cxpc42sc
3: data base index (status check)
262 DCBBD4 dcbbdschk 1: 0 Error reported from
2: ord (error) cxpc42sc
3: data base index (status check)
263 DCBBD5 dcbbdvcha 1: 0 Error reported from
2: ord (error) cxpc42mc
3: data base index
267 DCBBD2 dcbbdclpa 1: acb.ccode Nohit in acb−status, but
2: acb.ccode not end of file
3: not used
268 DCBBE0 dcbbeorder 1: 0 Illegal data base
2: data base reference index in order signal
3: not used
269 DCBBE4 dcbbeblk 1: 0 Error code from
2: czpcerror procedure cxpc2lbl when
3: record number blocking instance for
output
9
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
26A DCBBE4 dcbbecheck 1: 0 Error code from one of
2: cxpcerror the following procedures
3: record number cxpc21db, cxpc21sc,
cxpc21ao, cxpc21mo, when
trying to perform i s
order
26F DCBBE9 dcbbeifis 1: 0 Error from procedure
2: cxpcerror cxpc23is when trying to
3: record number perform in−service
in DO_INTERFACE operation for DO−inter−
face
270 DCBBE9 dcbbeifos 1: 0 Error from procedure
2: czpcerror cxpc23os when trying to
3: record number in perform out−of−service
DO_INTERFACE operation for DO−inter−
face
271 DCBBE9 service 1:hard_err Data base error in findl
2: data base reference call when perform in− or
3: not used out−of−service operation
for DO−object;"hard data
base error" when excep−
tion handling for data
base error is on (pd−
handling)
272 DCBBE9 service 1: acb.ccode Data base error in findl
2: data base reference call when perform in− or
3: not used out−of−service oper tion
for DO−object "soft data
base error" (pd−handling)
273 DCBAE0 main 1: 0 Error reported from
2: concept no dcbbfile no. Message
3: log file no preceding abort
274 DCBAE0 main 1: 0 Error reported from
2: concept no interf. dcbbfile no. Message
3: log file no interf. preceding abort
275 DCBAD0 main 1: 0 Error returned from
2: conc dcbbfile_no for DI.
3: l_file (precedes cxabortcall)
276 DCBAD0 main 1: 0 Error returned from
2: concinterface dcbbfile_no for DI−
3: l_fileinterface interface.(precedes
cxabort call)
279 DCBBE0 dcbbeorder 1: dc$opcode Illegal operation code
2: opcode for DO object
3: not used
10
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
27A DCBBE0 dcbbeorder 1: dc$opcode Illegal operation code
2: opcode for DO interf.
3: not used
27B DCBBD0 dcbbdorder 1: dc$opcode Illegal operadion cod
2: opcode
3: not used
27C DCBBD0 dcbbdorder 1: dc$opcode Illegal operation cod
2: opcode
3: not used
27D DCBBE3 dcbbeifsl 1: dc$opprop Illegal operation
2: op prop property − attempt to set
3: op code value from interfa e−
select
27E DCBBD3 dcbbdifsl 1: dc$opprop Select request on the
2: act_value_dcx di_interface and
3: select_dcx opprop is act_value.
27F DCBBE4 dcbbeblk 1: dc$opprop Illegal operation
2: op prop property in block routine
3: op code
280 DCBBE4 dcbbedblk 1: dc$opprop Illegal operation
2: op prop property in deblock
3: op code routine
281 DCBBD4 dcbbdblck 1: dc$opprop Illegal opprop.
2: opprop
3: block_dcx
282 DCBBD4 dcbbddebl 1: dc$opprop Illegal opprop.
2: opprop
3: deblock_dcx
283 DCBBD5 dcbbdvcha 1: dc$opprop Illegal opprop.
2: opprop
3: output_dcx
284 DCBAE0 main 1: 0 Illegal func code in
2: func code analys 1 signal
3: not used
285 DCBAE0 main 1: 0 Illegal signal identity
2: in sigid in signal to DO−handl er
3: not used
286 DCBBB1 dcbbbanl1 1: acb.ccode "prepare access of
2: data base index group format" has failed
11
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
287 DCBBD4 dcbbddebl 1: 0 "impossible" error code
2: ord (error) from cxpc−deblock
3: data base rec.no routine (DI)
288 DCBBB4 dcbbbdebl 1: 0 "impossible" error code
2: ord (error) from cxpc−deblock
3: data base rec.no routine (AI)
289 DCBBE4 dcbbedebl 1: 0 "impossible" error code
2: ord (error) from cxpc−deblock
3: data base rec.no routine (DO)
28A DCBBC4 dcbbcdebl 1: 0 "impossible" error code
2: ord (error) from cxpc−deblock
3: data base rec.no routine (AO)
28C DCBAG0 03posdudata1: dc$statgrp Illegal fieldnumber in
2: analys signal.id duanl1 signal.
3: field number
28D DCBAG0 03posdudata 1: dc$not_impl Object not implemented
2: data base index
3: ref typ
28F DCBBB5 limit 1: 0 error <>czpcok and
processing 2: ord (error) czpcillegal after
3: data base instance status check
301 DCBAC0 main 1: 0 Illegal func code in
2: func code analys 1 signal
3: not used
302 DCBAC0 main 1: 0 Illegal signal identity
2: in sigid in signal to AO−handler
3: not used
303 DCBBC0 dcbbcorder 1: 0 Illegal data base index
2: data base reference in order signal
3: not used
304 DCBBC2 dcbbcclpa 1: acb.ccode Data base error in find
2: not used call during clear persist
3: not used operation "soft data base
error"
306 DCBBC4 dcbbcblk 1: 0 Error code from cx−
2: czpcerror procedure cxpc31bl when
3: record number blocking instance for
output
307 DCBBC4 dcbbccheck 1: 0 Error code from one of
2: czpcerror the following procedures
3: record number cxpc31db, cxpc31se,
12
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
cxpc31so, cxpc31mo, when
trying to perform i s
order
312 DCBBC9 dcbbcifis 1: 0 Error from procedure
2: cxpcerror cxpc35is when trying to
3: record number in perform in−service
AO INTERFACE operation for AO−inter
face
313 DCBBC9 dcbbcifos 1: 0 Error from procedure
2: czpcerror cxpc35os when trying to
3: record number in perform out−of−service
AO INTERFACE operation for AO−inter
face
314 DCBBC9 service 1: cxsyserr Data base error in findl
2: data base reference call when perform in or
3: not used out−of−service operation
for AO−object "hard data
base error" when excep−
tion handling for data
base error is on (pd−
handling)
315 DCBBC9 service 1: acb.ccode Data base error in findl
2: data base reference call when perform in− or
3: not used out−of−service operation
for AO−object "soft data
base error" (pd−handling)
316 DCBBC0 dcbbcorder 1: dc$opcode Illegal operation code in
2: illegal opcode insignal to AO−object−
3: not used handler
317 DCBBC0 dcbbcorder 1: dc$opcode Illegal operation code in
2: illegal opcode insignal to AO INTERFACE
3: not used object−handler
318 DCBBC3 dcbbcaosl 1: dc$opprop Illegal operation proper−
2: illegal opprop ty in insignal to O−
3: opcode in insignal object−handler
319 DCBBC3 dcbbcifsl 1: dc$opprop Illegal operation proper−
2: illegal opprop ty in insignal to AO−
3: opcode in insignal object−handler
320 DCBBC3 dcbbcaods 1: dc$opprop Illegal operation
2: illegal opprop Property in insignal
3: opcode in insignal to AO−object handler
321 DCBAL0 GetConcNo 1: acb.ccode error from cxgetconcept
2: database reference because of illegal con
3: 0 cept number or name
13
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
322 DCBAL0 main 1: dc$opcode illegal operation code
2: opcode in signal Data Order
3: 0
323 DCBAL0 main 1: dc$sig_id illegal signal_id in
2: signal_id signal to object handler
3: 0
324 DCBBL0 dcbbl− 1: dc$mmi_num wrong mmi−number
permission 2: signal_id
3: mmi_num
325 DCBBL0 dcbbl− 1: dc$mmi_num wrong mmi−number
deselect 2: signal_id
3: mmi_num
326 DCBBL0 dcbblselect 1: dc$mmi_num wrong mmi−number
2: signal_id
3: mmi_num
327 DCBBL1 dcbblval ch 1: dc$dat_type illegal datatype, data−
2: datatype type is not handled by
3: 0 value−change−procedure
328 DCBBL1 dcbblval ch 1: acb.ccode data base error when
2: database−reference modifying value of
3: property number selected property in
data base
329 DCBBL3 GetName 1: acb.ccode property name and/or
2: database reference concept name is not found
3: property number in logical file one
32A DCBBL0 dcbblmk− 1: 0 There is no more free
select 2: databaseindex (LR,LF)index in select−table
3: mmi−number for storing the latest
selected object.This
object can not be
stored in select−
table until earlier
selected object on
any mmi is deselected.
32B DCBBL3 dcbblmessage 1: dc$nochind No channel index is
2: pres_func_id found for actual
3: 0 pres_func_id.
32C DCBBL3 dcbblEdAns− 1: dc$ParErr Parameter error when
Signal 2: data_answer sending data_answer−
3: ord(cxsyserr) signal to dialouge−
module.
14
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
32D DCBBL3 dcbblmessage 1: dc$ParErr Peremeter error when
2: syst_text sending syst_text−
3: ord(cxsyserr) signal to presentation
module.
32E DCBBL3 dcbblselect 1: 0 Select request
2: ord(typ_of_req) performed from
3: ord(operator) program
32F DCBBL0 dcbbl− 1: 0 Deselect request
deselect 2: ord(typ_of_req) performed from
3: ord(operator) program
330 DCBBL3 dcbbl− 1: dc$full_q signal queue is full
EdAnsSignal 2: signal_id (dec)
3: channel_id
331 DCBBL3 dcbbleddatch 1: dc$full_q signal queue is full
2: data_change
3: ord (portdatch)
332 DCBBL3 dcbblmessage 1: dc$full_q signal queue is full
2: syst_text
3: Channel_id
333 DCBBL3 dcbblmessage 1: 0 no VDU exist to send a
2: textindex message to operator,
3: reftyp instead this cxsysmes is
sent
334 DCBBL4 dcbbl− 1: dc$dat_type illegal datatype for
FetchValue 2: ord (datatype) property, (datatype
3: 0 exists but is not handled
by object handler)
335 DCBBL4 dcbbl− 1: dc$dat_type illegal datatype for
FetchValue 2: ord (datatype) property, (datatype which
3: 0 object handler is not
allowed to handle)
336 DCBAL0 dcbbl− 1: dc$opcode illegal operation code
OrderSignal 2: opcode in signal Order
3: 0
337 DCBBL0 dcbbl− 1: 0 Illegal typ_of_req
permission 2: ord(typ_of_req) in incoming
3: not_used transmission.
338 DCBBL3 GetName 1: ord(cxsyserr) hard database error
2: database reference in cxgetconcept
3: property number because of illegal
property number
15
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
339 DCBBL0 time_out_ 1: 0 current day number is
expired 2: current day less then requested day
3: requested day number. (Requested d y is
the day when the previous
order on the selected
object was performed).
33A DCBBL3 dcbbl− 1: dc$com_err Illegal netw,node
EdAnsSignal 2: signal_id (dec) on call at cxesend.
3: netw,node
33B DCBBL3 dcbbl− 1: dc$pri_err Priority error on
EdAnsSignal 2: signal_ider call at cxesend.
3: ORD(priority)
33C DCBBL3 dcbbl− 1: dc$parerr Parameter error on
EdAnsSignal 2: signal_id r call to cxesend.
3: ORD (syserr)
33D DCBBL3 dcbblmessage 1: dc$com_err Illegal netw,node
2: syst_text on call to cxesend
3: netw,node
33E DCBBL3 dcbblmessage 1: dc$pri_err Illegal priority on
2: syst_text call to cxesend
3: ORD (priority)
33F DCBBL3 dcbblmessage 1: dc$parerr Parameter error on
2: syst_text call to cxesend
3: ORD (syserr)
341 DCBBC3 dcbbcifds 1: dc$opprop Illegal operation
2: illegal opprop property in insignal to
3: opcode in insignal AO−object−handler
342 DCBBC4 dcbbcblk 1: dc$opprop Illegal operation
2: illegal opprop property in insignal to
3: opcode in insignal AO−object−handler
343 DCBBC4 dcbbcdeblk 1: dc$opprop Illegal operation
2: illegal opprop property in insignal to
3: opcode in insignal AO−object−handler
344 DCBBC4 dcbbcsc 1: dc$opprop Illegal operation
2: illegal opprop property in insignal to
3: opcode in insignal AO−object−handler
345 DCBBC4 dcbbcman 1: dc$opprop Illegal operation
2: illegal opprop property in insignal to
3: opcode in insignal AO−object−handler
346 DCBBC4 dcbbcsitp 1: dc$opprop Illegal operation
2: illegal opprop property in insignal to
3: opcode in insignal AO−object−handler
16
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm| function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
347 DCBBC4 dcbbcoutp 1: dc$opprop Illegal operation
2: illegal opprop property in insignal to
3: opcode in insignal AO−object−handler
348 DCBBC7 dcbbcackn 1: dc$opprop Illegal operation
2: illegal opprop property in insignal to
3: opcode in insignal AO−object−handler
349 DCBBC7 dcbbcuack 1: dc$opprop Illegal operation
2: illegal opprop property in insignal to
3: opcode in insignal AO−object−handler
350 DCBBC9 dcbbcifis 1: dc$opprop Illegal operation
2: illegal opprop property in insignal to
3: opcode in insignal AO−object−handler
351 DCBBC9 dcbbcifos 1: dc$opprop Illegal opprop in
2: illegal opprop insignal to
3: opcode in insignal AO−INTERFACE−object−
handler
361 DCBAC0 main 1: 0 Error when setting
2: concept number concept no and logic
3: log file number file no of AO_file
Preceding cxabort
362 DCBAC0 main 1: 0 Error when getting
2: concept number concept no and logic
3: log file number file no of AO−interface_
file. Preceding cxabort.
364 DCBBC1 dcbbcanl1 1: dc$not_impl Attempt to perform
2: data base reference analys_1 on NOT
3: aout_dcx implemented object.
401 DCBBE6 dcbbepd 1: 0 Error returned from
2: ord(error) status check
3: s_ref operation.
402 DCBBC6 dcbbcpd 1: 0 Error returned from
2: ord(error) statuscheck opera−
3: s_ref tion.
620 DCBAP0 main 1: acb.ccode Error returned from
2: 0 dcbbfile_no for
3: 0 GENOBJ.(precede
cxabort−call)
622 DCBAP0 main 1: dc$sig_id Reciwed insignal_id
2: signal_id not analys_1 or
3: 0 order.
17
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
623 DCBAP0 main 1: dc$not_impl Objewct is not
2: dbind implemented.
3: obj_file
628 DCBBP2 dcbbp_ 1: dc$reference Illegal reference
status_ 2: database index
check 3: ref_type
62A DCBBP2 dcbbpblck 1: dc$opprop Illegal opprop.
2: opprop
3: opcode
62B DCBBP2 dcbbpdebl 1: dc$opprop Illegal opprop.
2: opprop
3: opcode
630 DCBBP4 dcbbpmord 1: dc$opprop Illegal opprop.
2: opprop
3: opcode
631 DCBBP4 dcbbpmrrd 1: dc$opprop Illegal opprop.
2: opprop
3: opcode
632 DCBBP4 dcbbpvalch 1: dc$opprop Illegal opprop.
2: opprop
3: opcode
633 DCBBP1 dcbbpobsl 1: dc$opprop Illegal opprop.
2: opprop
3: opcode
634 DCBAP0 dcbbpanalys− 1: 0 Illegal ApplTreat.
_event 2: ApplTreat
3: 0
635 DCBAP0 dcbbphandle− 1: 0 Illegal opcode.
_order 2: opcode
3: 0
636 DCBBP5 dcbbpal0 1: 0 Illegal statgrp
2: 10 recived.
3: StatusGrp
637 DCBBP6 dcbbpa0l 1: 0 Illegal statgrp
2: 10 recived.
3: StatusGrp
638 DCBBP7 dcbbpa02 1: 0 Illegal statgrp
2: 10 recived.
3: StatusGrp
18
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
63A DCBBP9 dcbbpa04 1: 0 Dummy sysmes.
2: 04
3: StatusGrp
63B DCBBPA dcbbpa05 1: 0 Dummy sysmes.
2: 05
3: StatusGrp
63C DCBBPB dcbbpa06 1: 0 Dummy sysmes.
2: 06
3: StatusGrp
63D DCBBPC dcbbpa07 1: 0 Dummy sysmes.
2: 07
3: StatusGrp
63E DCBBPD dcbbpa08 1: 0 Dummy sysmes.
2: 08
3: StatusGrp
63F DCBBPE dcbbpa09 1: 0 Dummy sysmes.
2: 09
3: StatusGrp
640 DCBBP3 dcbbpackn 1: 0 Acknowledge procedure
2: ApplTreat for given ApplTreat
3: not used not implemented.
641 DCBBP3 dcbbpunack 1: 0 Illegal ApplTreat.
2: ApplTreat
3: not used
642 DCBBP3 dcbbpackn 1: dc$opprop Event property not
2: RecOppr found.
3: ApplTreat
643 DCBBP3 dcbbpunack 1: dc$opprop Illegal opprop for
2: RecOppr given ApplTreat.
3: ApplTreat
644 DCBBP2 dcbbpdebl 1: 0 Illegal ApplTreat.
2: ApplTreat
3: not used
650 DCBAP0 dcbbpxhand− 1: 0 Illegal opcode in
le_order 2: opcode appl_order signal
3: 0
651 DCBBPF dcbbpscale− 1: dc$opprop Illegal opprop in
valch 2: opprop appl_order signal
3: opcode
19
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
652 DCBBPF dcbbpscale− 1: dc$opprop Illegal opprop in
valch 2: opprop appl_order signal
3: opcode
3000001 DCBB15 dcbbmessage 1: 0 press func id in order
2: offset + textint signal is 0
3: reftyp (Object type)
3000009 DCBB05 dcbbdeselect 1: dc$mmi_num illegal mmi num
2: signal_id
3: mmi_num
300000A DCBB05 dcbbselect 1: dc$mmi_num illegal mmi num
2: signal_id
3: mmi_num
300000B DCBB05 dcbb− 1: dc$mmi_num illegal mmi num
permission 2: signal_id
3: mmi_num
300000D DCBB11 dcbbedselans 1: dc$full_q full queue
2: signal_id(sel_answer)
3: Cannel_id
300000F DCBB15 dcbbmessage 1: dc$full_q full queue
2: signal_id(syst_text)
3: Channel_id
3000015 DCBB06 dcbbpdsd 1: dc$full_q full queue
2: signal_id(du_write)
3: ord(port number)
3000016 DCBB11 dcbbedselans 1: dc$com_err Illegal netw,node
2: signal_id(sel_answer) on call at cxesend.
3: netw,node
3000017 DCBB11 dcbbedselans 1: dc$pri_err Priority error
2: signal_id(sel_answer) on call to
3: ORD (priority ) cxerepl
3000018 DCBB11 dcbbedselans 1: dc$parerr Parameter error on
2: signal_id(sel_answer) call to cxesend.
3: ORD (syserr)
3000019 DCBB15 dcbbmessage 1: dc$com_err Illegal netw,node
2: signal_id(syst_text) on call to cxesend.
3: netw,noded
300001A DCBB15 dcbbmessage 1: dc$pri_err Illegal priority
2: signal_id(syst_text) on call to cxesend.
3: ORD (priority)
20
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
300001B DCBB15 dcbbmessage 1: dc$parerr Paramereterroe on
2: signal_id(syst_text) call to cxesend.
3: ORD (syserr)
3000024 DCBB13 dcbbpdba 1: acb.ccode Error on database access
2: concept (dec) while preparing acb
3: dbind (hex)
3000030 DCBB05 dcbb− 1: 0 Illegal typ of req
permission 2: ord(typ_of_req)(dec) field in incoming
3: (not used) transm.
3000034 DCBB13 dcbbpdba 1: errorcode from Hard error returned on
cxsyserr (ord cxfind−call
(errorcode))
2: conceptno (dec)
3: dbind (hex)
3000040 DCBB05 time_out− 1: 0 Report error if
_expired 2: currday currday < reqday.
3: reqday
3000041 DCBB25 dcbbblock− 1: dc$opprop The received operation
deblock 2: operation property property in insignal
3: operation code was not of a valid type
3000042 DCBB26 dcbbset− 1: dc$ref_type Illegal event property
unack 2: event property for this reference type
3: reference type (object type)
3000043 DCBB26 dcbbreset− 1: dc$ref_type Illegal event property
unack 2: event property for this reference type
3: reference type (object type)
3000044 DCBB57 dcbbfile_no 1: acb.ccode Attempt to fetch concept
2: concept no no and logical file no
3: logical file no from file 1 by using
cxgetconcept went wrong
3000045 DCBB27 dcbbmanual_ 1: dc$ref_type Illegal reference type
order 2: order_signal_id (object type)
3: reference type
3000046 DCBB27 dcbbperform_ 1: dc$ref_type Illegal reference type
mord 2: order_signal_id (object type)
3: reference type
3000051 DCBB27 dcbbmanual_ 1: dc$opprop Invalid operation
order 2: opprop property
3: opcode
3000052 DCBB28 dcbbcond 1: dc$opprop Invalid operation
2: opprop property
3:opcode
21
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
3000053 DCBB28 dcbbcond 1: dc$opprop Invalid operation
2: opprop property
3: opcode
3000054 DCBB26 dcbbset_ 1: dc$opprop Invalid operation
unack 2: opprop property
3: opcode
3000055 DCBB26 dcbbreset_ 1: dc$opprop Invalid operation
unack 2: opprop property
3: opcode
3000064 DCBB20 dcbbdyn_prop 1: 0 Illegal event property
2: event property
3000067 DCBB31 dcbb5ev_text 1: 0 The combination of this
2: ord(event reason) ev reason and ev pro
3: ev_prop not known in procedure
3000068 DCBB23 dcbbs_proev 1: dc$sig_id Illegal signal identity
2: signal_identity not any of:
order,analys 1.
3000070 DCBB23 dcbbs_proev 1: dc$ref_type Illegal reference type
2: signal_id (object type) neither
3: reference type 02 pos dcx, 03 pos dcx,
controller dcx
3000081 DCBB05 dcbbdeselect 1: 0 Deselect request
2: ord(typ_of_req)(dec) performed
3:ord(operator)(dec) from program
3000082 DCBB05 dcbbselect 1: 0 select request
2: ord(typ_of_req)(dec) performed
3:ord (operator) (dec) from program
3000084 DCBB13 dcbbpagf 1: acb.ccode Error in call to
2: format (dec) cxnomember
3: conc (del)
3000085 DCBB13 dcbbpagf 1: acb.ccode Error in call to cxpath−
2: format (dec) member or cxdownlev.
3: concept (dec)
3000251 DCBB06 dcbbpdhp 1: 0 Event message overflow
2: 0 has occured
3: 0
3000253 DCBB32 dcbbev text 1: 0 Error when trying to get
2: ord (ev reason) event text references
3: ev prop etext and ptext
22
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
3000259 DCBB06 dcbbpdhp 1: dc$table_range Fieldno out of
2: fi_no range.
3: dcbdmxflno
300028B DCBB06 dcbbpdxsd 1: 0 pd bus number <0 or
2: pd bus number >=pnaxpdbus has been
3: not used given as a parameter
3000403 DCBB16 dcbbpdrec 1: acb.ccode data base error or no
2: 0 implemented record with
3: not used matching pd bus and dcm
3000404 DCBB16 dcbbpdrec 1: 0 data base error or no
2: dcm implemented record with
3: pd_bus matching pd bus and dcm
3000405 DCBB35 dcbbobjinit 1: acb.ccode data base error or no
2: 0 record implemented in
file
3000406 DCBB34 dcbbobjpd 1: 0 error detected in sending
2: ord(function) signals to a DCM
3: 0
3000407 DCBB34 dcbbobjpd 1: 0 error detected in sending
2: DCM signals to a DCM
3: pd_bus
3000600 DCBB05 select_− 1: 0 The selecttable is
object 2: refadr full.
3: mmi_num
3000601 DCBB15 dcbbmessage 1: dc$nochind Dest_ch_id=0
2: pres_func_id
3: 0
3000602 DCBB17 dcbbedproev 1: dc$nochind Dest_ch_id=0.
2: proc_event_dcx
3: 0
3000603 DCBB17 dcbcpproev 1: dc$nochind Dest_ch_id=0.
2: proc_event_dcx
3: 0
3000604 DCBB11 dcbbedselans 1: dc$ParErr Answer from cxerepl
2: sel_answer not czok.
3: ord(cxsyserr)
3000605 DCBB15 dcbbmessage 1: dc$ParErr Parametererror with
2: syst_text cxesend.
3: ord(cxsyserr)
23
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
01010001 DCBBQ1 dcbbq_un− 1: dc$opprop Illegal operation
ack_set_re− 2: opprop property in the
set 3: opcode received order signal.
01020001 DCBBQ2 dcbbq_ 1: dc$opprop Illegal operation
block_de− 2: opprop property in the
block 3: opcode received order signal.
01020002 DCBBQ2 dcbbq_ 1: dc$typ_of_req Illegal type of
block_de− 2: opcode requester in the
block 3: opprop received order signal.
01030001 DCBBQ3 dcbbq_va− 1: dc$opprop Illegal operation
lue_change 2: opprop property in the
3: opcode received order signal.
01040001 DCBBQ4 dcbbq_mord_ 1: dc$opprop Illegal operation
set_reset 2: opprop property in the
3: opcode received order signal.
01050001 DCBBQ5 dcbbq_i1_ 1: dc$not_impl The specified
treat 2: data base reference instance is not
3: reference type implemented.
01050002 DCBBQ5 dcbbq_i2_ 1: dc$not_impl The specified
treat 2: data base reference instance is not
3: reference type implemented.
01050003 DCBBQ5 dcbbq_anl1_ 1: dc$fieldno Illegal data type
treat 2: signal identity in the received
3: data base reference analys1 signal.
01050004 DCBBQ5 treat_ana− 1: dc$inp_param The analyse type
lys_1 2: analyse type specified in the
3: data base reference database is not
permitted.
01050005 DCBBQ5 treat_ana− 1: dc$not_impl The specified
lys_1 2: data base reference instance is not
3: reference type implemented.
01070001 DCBBQ7 ordtype1 1: dc$not_impl The function is
2: data base reference not implemented.
3: reference type
01070002 DCBBQ7 ordtype2 1: dc$not_impl The function is
2: data base reference not implemented.
3: reference type
01070003 DCBBQ7 ordtype3 1: dc$not_impl The function is
2: data base reference not implemented.
3: reference type
24
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
01070004 DCBBQ7 ordtype4 1: dc$not_impl The function is
2: data base reference not implemented.
3: reference type
01070005 DCBBQ7 ordtype5 1: dc$not_impl The function is
2: data base reference not implemented.
3: reference type
01070006 DCBBQ7 ordtype6 1: dc$not_impl The function is
2: data base reference not implemented.
3: reference type
01070007 DCBBQ7 ordtype7 1: dc$not_impl The function is
2: data base reference not implemented.
3: reference type
01070008 DCBBQ7 ordtype8 1: dc$not_impl The function is
2: data base reference not implemented.
3: reference type
01070009 DCBBQ7 ordtype9 1: dc$not_impl The function is
2: data base reference not implemented.
3: reference type
01090001 DCBBQ9 anltype1 1: dc$not_impl The specified
2: data base reference instance is not
3: reference type implemented.
01090002 DCBBQ9 anltype1 1: dc$fieldno Illegal data type
2: signal identity in the received
3: data base reference analys1 signal.
01090003 DCBBQ9 anltype2 1: dc$not_impl The specified
2: data base reference instance is not
3: reference type implemented.
01090004 DCBBQ9 anltype2 1: dc$fieldno Illegal data type
2: signal identity in the received
3: data base reference analys1 signal.
01090005 DCBBQ9 anltype3 1: dc$fieldno Illegal data type
2: signal identity in the received
3: data base reference analys1 signal.
01090006 DCBBQ9 anltype3 1: dc$not_impl The function is
2: data base reference not implemented.
3: reference type
01090007 DCBBQ9 anltype3 1: dc$fieldno Illegal data type
2: signal identity in the received
3: data base reference analys1 signal.
25
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
01090008 DCBBQ9 anltype4 1: dc$not_impl The function is
2: data base reference not implemented.
3: reference type
01090009 DCBBQ9 anltype5 1: dc$not_impl The function is
2: data base reference not implemented.
3: reference type
01090010 DCBBQ9 anltype6 1: dc$not_impl The function is
2: data base reference not implemented.
3: reference type
01090011 DCBBQ9 anltype7 1: dc$not_impl The function is
2: data base reference not implemented.
3: reference type
01090012 DCBBQ9 anltype8 1: dc$not_impl The function is
2: data base reference not implemented.
3: reference type
01090013 DCBBQ9 anltype9 1: dc$not_impl The function is
2: data base reference not implemented.
3: reference type
33000001 DCBAQ0 main 1: dc$sig_id Illegal signal
2: signal identity identity in the
3: − received signal.
33000002 DCBAQ0 initialize 1: dc$outp_param Failed to find
2: concept number concept MMC_X.
3: logical file number
33000007 DCBAQ0 treat_order 1: dc$opcode Illegal opcode
2: opcode in the received
3: − order signal.
33000009 DCBAQ0 treat_order 1: dc$inp_param Illegal order
2: order type type in the da−
3: − tabase.
03200001 DCBAT0 main 1: dc$sig_id Illegal signal
2: signal_id identity in the
3: − received signal.
03200002 DCBAT0 initialize 1: dc$outp_param Failed to find
2: order type concept
3: − TEXT_DATA.
03200003 DCBAT0 treat_order 1: dc$opcode Illegal opcode
2: opcode in the receveid
3: − data_order signal.
26
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
03200004 DCBAT0 treat_order 1: dc$opcode Illegal opcode
2: opcode in the receveid
3: − order signal.
03210001 DCBBT1 dcbbtobsel 1: dc$opprop Illegal opprop
2: opprop in the receveid
3: opcode data_order signal.
03220001 DCBBT2 dcbbtselect1: dc$mmi_num Illegal mmi num.
2: signal_id
3: mmi_num
03220002 DCBBT2 dcbbtselect 1: dc$typ_of_req Select request
2: ord (typ_of_req) performed from
3: ord (operator) program.
03220003 DCBBT2 dcbbtdeselect1: dc$mmi_num Illegal mmi num.
2: signal_id
3: mmi_num
03220004 DCBBT2 dcbbtdeselect1: dc$typ_of_req Deselect request
2: ord (typ_of_req) performed from
3: ord (operator) program.
03220005 DCBBT2 dcbbt− 1: dc$mmi_num Illegal mmi num.
permission 2: signal_id
3: mmi_num
03220006 DCBBT2 dcbbt− 1: 0 Illegal typ_of_reg
permission 2: ord (typ_of_req) field in incoming
3: 0 transmission.
0322007 DCBBT2 dcbbttime_− 1: 0 Report error if
out−_expired 2: currday currday < reqday.
3: reqday
0322008 DCBBT2 dcbbt_− 1: 0 The selecttable is
select_− 2: refadr full.
object 3: mmi_num
03230001 DCBBT3 dcbbt− 1: dc$full_q Full queue
edselans 2: sig_id (sel_answer)
3: Channel_id
03230002 DCBBT3 dcbbt− 1: dc$com_err Illegal netw, node
edselans 2: sig_id (sel_answer) on call at cxesend
3: netw,node
03230003 DCBBT3 dcbbt− 1: dc$pri_err Priority error
edselans 2: sig_id (sel_answer) on call to
3: ord priority) cxerepl
27
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
03230004 DCBBT3 dcbbt− 1: dc$parerr Parameter error on
edselans 2: sig_id call to cxesend
3: ord (cxsyserr)
03230005 DCBBT3 dcbbt− 1: dc$parerr Answer from cxerepl
edselans 2: sig_id not czok.
3: ord (cxsyserr)
03230006 DCBBT3 dcbbt− 1: dc$opprop Illegal opprop
FetchValue 2: opprop in the receveid
3: opcode signal.
03230007 DCBBT3 dcbbtmessage 1: dc$full_q Full queue
2: sig_id (syst_text)
3: Channel_id
03230008 DCBBT3 dcbbtmessage 1: dc$com_err Illegal netw, node
2: sig_id (syst_text) on call at cxesend
3: netw,node
03230009 DCBBT3 dcbbtmessage 1: dc$pri_err Priority error
2: sig_id (syst_text) on call to
3: ord priority) cxerepl
03230010 DCBBT3 dcbbtmessage 1: dc$parerr Parameter error on
2: sig_id (syst_text) call to cxesend
3: ord (cxsyserr)
03230011 DCBBT3 dcbbtmessage 1: dc$parerr Answer from cxerepl
2: sig_id (syst_text) not czok.
3: ord (cxsyserr)
03230012 DCBBT3 dcbbtmessage 1: dc$nochind Dest_ch_id = 0
2: pres_func_id
3: 0
03230013 DCBBT3 dcbbtmessage 1: 0 pres_func_id in
2: offset + textint order signal is 0
3: reftype
03240001 DCBBT4 dcbbtset 1: dc$opprop Illegal opprop
2: opprop in the receveid
3: opcode signal.
03240002 DCBBT4 dcbbtreset 1: dc$opprop Illegal opprop
2: opprop in the receveid
3: opcode signal.
03240003 DCBBT4 dcbbtvalch 1: 0 Illegal length_type
2: Length_type must bee 1,2 or 3
3: when handling text
28
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1992−02−14 Appendix 3
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
03240004 DCBBT4 dcbbtvalch 1: dc$dat_type Illegal datatype
2: value.datatype when handling text
3: dcx_string (25)
03240005 DCBBT4 dcbbtvalch 1: dc$dat_type Illegal datatype
2: value.datatype when handling boolean
3: dcx_bool (3) property − BOOLEAN
03240006 DCBBT4 dcbbtvalch 1: dc$dat_type Illegal datatype
2: value.datatype when handling real
3: dcx_real (4) property − REAL
03240007 DCBBT4 dcbbtvalch 1: dc$dat_type Illegal datatype
2: value.datatype when handling int_long
3: dcx_intl (0) property − INT_LONG
03240008 DCBBT4 dcbbtvalch 1: dc$dat_type Illegal datatype
2: value.datatype when handling boolean
3: dcx_bool (3) property − B1_VAL
03240009 DCBBT4 dcbbtvalch 1: dc$dat_type Illegal datatype
2: value.datatype when handling boolean
3: dcx_bool (3) property − B2_VAL
03240010 DCBBT4 dcbbtvalch 1: dc$dat_type Illegal datatype
2: value.datatype when handling boolean
3: dcx_bool (3) property − B3_VAL
03240011 DCBBT4 dcbbtvalch 1: dc$dat_type Illegal datatype
2: value.datatype when handling boolean
3: dcx_bool (3) property − B4_VAL
03240012 DCBBT4 dcbbtvalch 1: dc$opprop Illegal opprop
2: opprop in the receveid
3: opcode signal.
03300001 DCBUV0 dcbuv0 1: dc$other_err Fail while sending
2: 0 clear_persist
3: event property
03300002
29
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1990−05−29 Appendix 4
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
00000010 dcca01 param_ 1: dc$inp_param Illegal parameter
unchanged 2: parameter type type.
3: −
00000020 dcca01 param_ 1: dc$inp_param Illegal type of
convert 2: type of conversion conversion.
3: −
00000030 dcca01 param_ 1: CONV_acb.ccode Conversion member not
convert 2: db index found in the
3: − database.
00000040 dcca01 handle_ 1: dc$inp_param Illegal parameter
param 2: parameter type type.
3: −
00000050 dcca01 compare_ 1: dc$inp_param Illegal value in
data 2: valid valid.
3: −
00000001 dcca20 main 1: acb.ccode Initialization error
2: − cxgetconcept failed.
3: − File = EVENT_TREAT.
00000002 dcca20 main 1: acb.ccode Initialization error
2: − cxgetconcept failed.
3: − File = TEXT.
00000010 dcca20 mod_text 1: dc$full_q Dccc81 full.
(send_sig) 2: signal id
3: port number
00000020 dcca20 almorder 1: dc$full_q Object handler queue
2: signal id full.
3: −
00000030 dcca20 almorder 1: dc$com_err Error in network or
2: signal id node at dsx send.
3: network,node
00000040 dcca20 almorder 1: dc$pri_err Illegal priority at
2: signal id dsx send.
3: signal_priority
00000050 dcca20 almorder 1: dc$Parerr Parameter error at
2: signal id dsx send.
3: ORD (cxsyserr)
00000060 dcca20 main 1: dc$sig_id Illegal signal id.
2: signal id
3: Resp_ch_id
1(15)
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1990−05−29 Appendix 4
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
00000070 dcca20 main 1: dc$inp_par Treatref = 0.
2: event reason
3: object_typ
00000080 dcca20 main 1: dc$inp_par Illegal treatref.
2: treatref
3: object_typ
00000090 dcca20 main 1: dc$inp_par Illegal event reason.
2: event reason
3: object_typ
00000100 dcca20 main 1: dc$full_q Dccc81 full.
(send_sig) 2: signal id
3: port number
00000001 dcca40 main 1: acb.ccode Initialization error
2: − cxgetconcept failed.
3: −
00000010 dcca40 send_sig 1: dc$full_q Dccc81 full.
2: signal id
3: port number
00000020 dcca40 main 1: dc$inp_par Illegal text ptrs in
2: − signal.
3: −
00000001 dcca60 main 1: acb.ccode Initialization error
2: − cxgetconcept failed.
3: −
00000010 dcca60 getinst 1: ORD (cxsyserr) AUD_ALARM_DESCR not
2: db index found. Hard err.
3: Resp_ch_id
00000020 dcca60 getinst 1: acb.ccode AUD_ALARM_DESCR not
2: db index found. Soft err.
3: Resp_ch_id
00000030 dcca60 init_dly 1: ORD (cxsyserr) Dccc60 full OR no tqb.
2: signal id Repetition OR reset
3: port number of DO failed.
00000040 dcca60 switch_do 1: dc$full_q Object handler queue
2: signal id full. Start of alarm
3: − failed.
00000040 dcca60 switch_do 1: dc$com_err Error in network or
2: signal id node at dsx send.
3: network,node Start of alarm failed.
2
ABB INDUSTRIAL SYSTEMS
SYSTEM MESSAGES 1990−05−29 Appendix 4
Trace no | Program/ | Procedure/ | Parameter description | Comments
(HEX) | subpgm | function | 1=code |
| | | 2=data1 |
| | | 3=data2 |
00000040 dcca60 switch_do 1: dc$pri_err Illegal priority at
2: signal id dsx send. Start of
3: signal_priority alarm failed.
00000040 dcca60 switch_do 1: dc$Parerr Parameter error at
2: signal id dsx send. Start of
3: ORD ( cxsyserr ) alarm failed.
00000050 dcca60 switch_do 1: dc$full_q Object handler queue
2: signal id full. Alarm set/reset
3: − failed.
00000050 dcca60 switch_do 1: dc$com_err Error in network or
2: signal id node at dsx send.
3: network,node Alarm set/reset failed.
00000050 dcca60 switch_do 1: dc$pri_err Illegal priority at
2: signal id dsx send.Alarm
3: signal_priority set/reset failed.
00000050 dcca60 switch_do 1: dc$Parerr Parameter error at
2: signal id dsx send. Alarm
3: ORD ( cxsyserr ) set/reset failed.
00000060