Logo Passei Direto
Buscar
Material
páginas com resultados encontrados.
páginas com resultados encontrados.

Escolha uma das opções e acesse esse e outros materiais sem bloqueio. 🤩

Cadastre-se ou realize login

Ao continuar, você aceita os Termos de Uso e Política de Privacidade

Escolha uma das opções e acesse esse e outros materiais sem bloqueio. 🤩

Cadastre-se ou realize login

Ao continuar, você aceita os Termos de Uso e Política de Privacidade

Escolha uma das opções e acesse esse e outros materiais sem bloqueio. 🤩

Cadastre-se ou realize login

Ao continuar, você aceita os Termos de Uso e Política de Privacidade

Escolha uma das opções e acesse esse e outros materiais sem bloqueio. 🤩

Cadastre-se ou realize login

Ao continuar, você aceita os Termos de Uso e Política de Privacidade

Escolha uma das opções e acesse esse e outros materiais sem bloqueio. 🤩

Cadastre-se ou realize login

Ao continuar, você aceita os Termos de Uso e Política de Privacidade

Escolha uma das opções e acesse esse e outros materiais sem bloqueio. 🤩

Cadastre-se ou realize login

Ao continuar, você aceita os Termos de Uso e Política de Privacidade

Escolha uma das opções e acesse esse e outros materiais sem bloqueio. 🤩

Cadastre-se ou realize login

Ao continuar, você aceita os Termos de Uso e Política de Privacidade

Escolha uma das opções e acesse esse e outros materiais sem bloqueio. 🤩

Cadastre-se ou realize login

Ao continuar, você aceita os Termos de Uso e Política de Privacidade

Escolha uma das opções e acesse esse e outros materiais sem bloqueio. 🤩

Cadastre-se ou realize login

Ao continuar, você aceita os Termos de Uso e Política de Privacidade

Escolha uma das opções e acesse esse e outros materiais sem bloqueio. 🤩

Cadastre-se ou realize login

Ao continuar, você aceita os Termos de Uso e Política de Privacidade

Prévia do material em texto

11 
' ... the chidden billow seems to pelt the clouds ...' 
Othello, Act II, Scene I. 
Sea waves have attracted attention and comment throughout recorded 
history. Aristotle (384-322 BC) observed the existence of a relationship 
between wind and waves, and the nature of this relationship has been a 
subject of study ever since. However, at the present day, understanding of 
the mechanism of wave formation and the way that waves travel across the 
oceans is by no means complete. This is partly because observations of 
wave characteristics at sea are difficult, and partly because mathematical 
models of wave behaviour are based upon the dynamics of idealized fluids, 
and ocean waters do not conform precisely with those ideals. Nevertheless, 
some facts about waves are well established, at least to a first 
approximation, and the purpose of this Chapter is to outline the qualitative 
aspects of water waves and to explore some of the simple relationships of 
wave dimensions and characteristics. 
We start by examining the dimensions of an idealized water wave, and the 
terminology used for describing waves (Figure 1.1). 
:igure 1.1 Vertical profile of two successive 
_.ealized ocean waves, showing their linear 
Jimensions and sinusoidal shape. 
Wave height (H) refers to the overall vertical change in height between the 
wave crest (or peak) and the wave trough. The wave height is twice the 
wave amplitude (a). Wavelength (L) is the distance between two 
successive peaks (or two successive troughs). Steepness is defined as wave 
height divided by wavelength (H/L) and, as can be seen in Figure 1.1, is not 
the same thing as the slope of the sea-surface between a wave crest and its 
adjacent trough. The time interval between two successive peaks (or two 
successive troughs) passing a fixed point is known as the period (T), and is 
generally measured in seconds. The number of peaks (or the number of 
troughs) which pass a fixed point per second is known as the frequency (f). 
As the answer to Question 1.1 shows, period is the reciprocal of frequency. 
We will return to this concept in Section 1.2. 
12 
Waves are a common occurrence in everyday life, and are manifested as, for 
example, sound, the motion of a plucked guitar string, tipples on a pond, or 
the billows on the ocean. It is not easy to define a wave. Before attempting 
to do so, let us consider some of the characteristics of wave motion: 
1 A wave transfers a disturbance from one part of a material to another. 
(The disturbance caused by dropping a stone into a pond is transmitted 
across the pond by tipples.) 
2 The disturbance is propagated through the material without any 
substantial overall motion of the material itself. (A floating cork merely 
bobs up and down on the tipples, but experiences very tittle overall 
movement in the direction of travel of the ripples.) 
3 The disturbance is propagated without any significant distortion of the 
wave form. (A ripple shows very little change in shape as it travels across a 
pond.) 
4 The disturbance appears to be propagated with constant speed. 
The answer, 'energy', provides a reasonable working definition of wave 
motion- a means whereby energy is transported across or through a 
material without any significant overall transport of the material itself. 
There are two aspects to be considered: first, the progress of the waves 
(which we have already noted), and secondly, the movement of the water 
particles themselves. Superficial observation of the effect of ripples on a 
floating cork suggests that the water particles move 'up and down', but 
closer observation will reveal that, provided the water is very much deeper 
than the ripple height, the cork is describing a nearly circular path in a 
vertical plane, parallel with the direction of wave movement. In a more 
general sense, the particles are displaced from an equilibrium position, and 
a wave motion is the propagation of regular oscillations about that 
equilibrium position. Thus, the particles experience a displacing force and a 
restoring force. The nature of these forces is often used in the descriptions 
of various types of waves. 
1.1.1 TYPES OF WAVES 
All waves can be regarded as progressive waves, in that energy is moving 
through, or across the surface of, the material. The so-called standing 
wave, of which the plucked guitar string is an example, can be considered 
as the sum of two progressive waves of equal dimensions, but travelling in 
opposite directions. We examine this in more detail in Section 1.6.4. 
Waves which travel through the material are called body waves. Examples 
of body waves are sound waves and seismic P- and S-waves, but our main 
concern in this Volume is with su~.ace waves (Figure 1.2). The most 
familiar surface waves are those which occur at the interface between 
atmosphere and ocean, caused by the wind blowing over the sea. Other 
external forces acting on the fluid can also generate waves. Examples range 
from raindrops falling into tidal pools, through diving gannets and ocean- 
going liners to earthquakes (see Section 1.6.3). 
The tides are also waves (Figure 1.2), caused by the gravitational influence 
of the Sun and Moon and having periods corresponding to the causative 
forces. This aspect is considered in more detail in Chapter 2. Most other 
waves, however, result from a non-periodic disturbance of the water. The 
water particles are displaced from an equilibrium position, and to regain 
that position they require a restoring force, as mentioned above. The 
restoring force causes a particle to 'overshoot' on either side of the 
equilibrium position. Such alternate displacements and restorations 
establish a characteristic oscillatory 'wave motion', which in its simplest 
form has sinusoidal characteristics (Figures 1.1 and 1.6), and is sometimes 
referred to as simple harmonic motion. In the case of surface waves on 
water, there are two such restoring forces which maintain wave motion: 
1 The gravitational force exerted by the Earth. 
2 Surface tension, which is the tendency of water molecules to stick 
together and present the smallest possible surface to the air. So far as the 
effect on water waves is concerned, it is as if a weak elastic skin were 
stretched over the water surface. 
pe of wave CAPILLARY 
WAVES 
0.017 m 
I 
0.1m 
lm 
I 
wavelength 
10 m 100 m 1000 m 
I I I GRAVITY WAVES 
wind waves long-period ordinary 
waves tide waves 
(fixed period) 
Figure 1.2 Types of surface waves, showing the relationships between wavelength, wave 
frequency and period, the nature of the forces that cause them, and the relative amounts of 
energy in each type of wave. Unfamiliar terms will be explained later. Note: Waves caused by 
'other wind waves' are waves resulting from interactions between waves of higher frequency 
as they move away from storm areas - see Section 1.4.2. 
14 
Water waves are affected by both of these forces. In the case of waves with 
wavelengths less than about 1.7 cm, the principal restoring force is surface 
tension, and such waves are known as capillary waves. They are important 
in the context of remote sensing of the oceans (Section 1.7.1). However, 
the main interest of oceanographers lies with surface waves of wavelengths 
greater than 1.7 cm, and the principal restoring force for such waves is 
gravity; hence they are known as gravity waves (Figure 1.2). 
Gravity waves can also be generated at an interface between two layers of 
ocean water of differing densities. Because the interface is a surface, such 
waves are, strictly speaking, surface waves, but oceanographers usually 
refer to them as internal waves. These occur most commonly where there 
is a rapid increase of density with depth, i.e. a steep density gradient, or 
pycnocline. Pycnoclines themselves resultfrom steep gradients of 
temperature and/or salinity, the two properties which together govern the 
density of seawater. Because the difference in density between two water 
layers is much smaller than that between water and air, less energy is 
required to displace the interface from its equilibrium position, and 
oscillations are more easily set up at an internal interface than at the sea- 
surface. Internal waves travel considerably more slowly than most surface 
waves. They have greater amplitudes than all but the largest surface waves 
(up to a few tens of metres), as well as longer periods (minutes or hours 
rather than seconds, cf. Figure 1.2) and longer wavelengths (hundreds 
rather than tens of metres). Internal waves are of considerable importance 
in the context of vertical mixing processes in the oceans, especially when 
they break. 
Not all waves in the oceans are displaced primarily in a vertical plane. For 
example, because atmosphere and oceans are on a rotating Earth, variation 
of planetary vorticity with latitude (i.e. variation in the angular velocity 
of the Earth's surface and hence in the effect of the Earth's rotation on 
horizontal motions) causes horizontal deflection of atmospheric and 
oceanic currents, and provides restoring forces which establish oscillations 
mainly in a horizontal plane, so that easterly or westerly currents tend to 
swing back and forth about an equilibrium latitude. These large-scale 
horizontal oscillations are known as planetary (or Rossby) waves, and 
may occur as surface or as internal waves. They are not gravity waves (i.e. 
the restoring force is not gravity) and so do not appear in Figure 1.2. 
1.1.2 WIND-GENERATED WAVES IN THE OCEAN 
In 1774, Benjamin Franklin said: 'Air in motion, which is wind, in passing 
over the smooth surface of the water, may rub, as it were, upon that 
surface, and raise it into wrinkles, which, if the wind continues, are the 
elements of future waves'. 
In other words, if two fluid layers having differing speeds are in contact, 
there is frictional stress between them and there is a transfer of momentum 
and energy. The frictional stress exerted by a moving fluid is proportional 
to the square of the speed of the fluid, so the wind stress exerted upon a 
water surface is proportional to the square of the wind speed. At the sea- 
surface, most of the transferred energy results in waves, although a small 
proportion is manifest as wind-driven currents. In 1925, Harold Jeffreys 
suggested that waves obtain energy from the wind by virtue of pressure 
differences caused by the sheltering effect provided by wave crests 
(Figure 1.3). 
15 
:igure 1.3 Jeffreys' 'sheltering' model of wave 
3neration. Curved grey lines indicate air flow; 
horter, black arrows show water movement. 
he rear face of the wave against which the wind 
lows experiences a higher pressure than the 
"ont face, which is sheltered from the force of 
]e wind. Air eddies are formed in front of each 
�9 ave, leading to excesses and deficiencies of 
ressure (shown by plus and minus signs 
~spectively), and the pressure difference pushes 
le wave along. 
Although Jeffreys' hypothesis fails to explain the formation of very small 
waves, it does seem to work if: 
1 Wind speed exceeds wave speed. 
2 Wind speed exceeds 1 m s-1. 
3 The waves are steep enough to provide a sheltering effect. 
Empirically, it can be shown that the sheltering effect is at a maximum 
when wind speed is approximately three times the wave speed. In general, 
the greater the amount by which wind speed exceeds wave speed, the 
steeper the wave. In the open oceans, most wind-generated waves have 
steepness (H/L) of about 0.03 to 0.06. However, as we shall see later, wave 
speed in deep water is not related to wave steepness, but to wavelength- 
the greater the wavelength, the faster the wave travels. 
Consider the sequence of events that occurs if, after a period of calm weather, 
a wind starts to blow, rapidly increases to a gale, and continues to blow at 
constant gale force for a considerable time. No significant wave growth 
occurs until wind speed exceeds 1 m s -1. Then, small steep waves form as the 
wind speed increases. Even after the wind has reached a constant gale force, 
the waves continue to grow with increasing rapidity until they reach a size 
and wavelength appropriate to a speed which corresponds to one-third of the 
wind speed. Beyond this point, the waves continue to grow in size, 
wavelength and speed, but at an ever-diminishing rate. On the face of it, one 
might expect that wave growth would continue Until wave speed was the 
same as wind speed. However, in practice wave growth ceases whilst Wave 
speed is still at some value below wind speed. This is because: 
1 Some of the wind energy is transferred to the ocean surface via a 
tangential force, producing a surface current. 
2 Some wind energy is dissipated by friction, and is converted to heat and 
sound. 
3 Energy is lost from larger waves as a result of white-capping, i.e. 
breaking of the tip of the wave crest because it is being driven forward by 
the wind faster than the wave itself is travelling. Much of the energy 
dissipated during white-capping is converted into forward momentum of the 
water itself, reinforcing the surface current initiated by process 1 above. 
16 
1.1.3 THE FULLY DEVELOPED SEA 
We have already seen that the size of waves in deep water is governed not 
only by the actual wind speed, but also by the length of time the wind has 
been blowing at that speed. Wave size also depends upon the unobstructed 
distance of sea, known as the fetch, over which the wind blows. 
Provided the fetch is extensive enough and the wind blows at constant speed 
for long enough, an equilibrium is eventually reached, in which energy is 
being dissipated by the waves at the same rate as the waves receive energy 
from the wind. Such an equilibrium results in a sea state called a fully 
developed sea, in which the size and characteristics of the waves are not 
changing. However, the wind speed is usually variable, so the ideal fully 
developed sea, with waves of uniform size, rarely occurs. Variation in wind 
speed produces variation in wave size, so, in practice, a fully developed sea 
consists of a range of wave sizes known as a wave field. Waves coming into 
the area from elsewhere will also contribute to the range of wave sizes, as 
will interaction between waves- a process we explain in Section 1.4.2. 
Oceanographers find it convenient to consider a wave field as a spectrum of 
wave energies (Figure 1.4). The energy contained in an individual wave is 
proportional to the square of the wave height (see Section 1.4). 
:igure 1.4 Wave energy spectra for three fully 
Jeveloped seas, related to wind speeds of 20, 30 
]nd 40 knots (about 10, 15 and 20 rn s -1 
�9 espectively). The area under each curve is a 
~easure of the total energy in that particular 
Jvave field. 
17 
1.1.4 WAVE HEIGHT AND WAVE STEEPNESS 
As was hinted in Section 1.1.3, the height of any real wave is determined by 
many component waves, of different frequencies and amplitudes, which 
move into and out of phase with, and across each other ('in phase' means 
that peaks and troughs coincide). In theory, if the heights and frequencies of 
all the contributing waves were known, it would be possible to predict the 
heights and frequencies of the real waves accurately. In practice, this is 
rarely possible. Figure 1.5 illustrates the range of wave heights occurring 
over a short time at one location - there is no obvious pattern to the 
variation of wave height. 
:igure 1.5 A typical wave record, i.e. a record 
9f variation in water level (displacement from 
~quilibrium) with time at one position. 
For many applications of wave research, it is necessary to choosea single 
wave height which characterizes a particular sea state. Many oceanographers 
use the significant wave height, H1/3, which is the average height of the 
highest one-third of all waves occurring in a particular time period. In any 
wave record, there will also be a maximum wave height,/-/max. Prediction of 
/-/max for a given period of time has great value in the design of structures 
such as flood barriers, harbour installations and drilling platforms. To build 
these structures with too great a margin of safety would be unnecessarily 
expensive, but to underestimate Hmax could have tragic consequences. 
However, it is necessary to emphasize the essentially random nature of 
/-/max. Although the wave Hmax(25 years), will occur on average once every 
25 years, this does not mean such a wave will automatically occur every 
25 years - there may be periods much longer than that without one. On the 
other hand, two such waves might appear next week. 
As wind speed increases, so H1/3 in the fully developed sea increases. The 
relationship between sea state, H1/3 and wind speed is expressed by the 
Beaufort Scale (Table 1.1, overleaf). The Beaufort Scale can be used to 
estimate wind speed at sea, but is valid only for waves generated within the 
local weather system, and assumes that there has been sufficient time for a 
fully developed sea to have become established (cf. Figure 1.4). 
The absolute height of a wave is less important to sailors than is its steepness 
(H/L). As mentioned in Section 1.1.2, most wind-generated waves have a 
steepness in the order of 0.03 to 0.06. Waves steeper than this can present 
problems for shipping, but fortunately it iS very rare for wave steepness to 
exceed 0.1. In general, wave steepness diminishes with increasing 
wavelength. The short choppy seas rapidly generated by local squalls are 
particularly unpleasant to small boats because the waves are steep, even 
though not particularly high. On the open ocean, very high waves can usually 
be ridden with little discomfort because of their relatively lon~ wavelengths. 
Table 1.1 A selection of information from the Beaufort Wind Scale. 
Beaufort 
No. 
Name Wind speed 
(mean) 
knots m s -1 
State of the sea-surface Significant 
wave height, 
H1/3 (m) 
10 
11 
12 
Calm <1 0.0-0.2 
Light air 1-3 0.3-1.5 
Light breeze 4-6 1.6-3.3 
Gentle breeze 7-10 3.4-5.4 
Moderate breeze 11-16 5.5-7.9 
Fresh breeze 17-21 8.0-10.7 
Strong breeze 22-27 10.8-13.8 
Near gale 28-33 13.9-17.1 
Gale 34-40 17.2-20.7 
Strong gale 41-47 20.8-24.4 
Storm 48-55 24.5-28.4 
Violent storm 56-64 28.5-32.7 
Hurricane >64 >32.7 
Sea like a mirror 
Ripples with appearance of scales; no foam crests 
Small wavelets; crests have glassy appearance but 
do not break 
Large wavelets; crests begin to break; scattered 
white horses 
Small waves, becoming longer; fairly frequent 1.5 
white horses 
Moderate waves taking longer form; many 2.0 
white horses and chance of some spray 
Large waves forming; white foam crests 3.5 
extensive everywhere and spray probable 
Sea heaps up and white foam from breaking 5.0 
waves begins to be blown in streaks; spindrift 
begins to be seen 
Moderately high waves of greater length; edges 7.5 
of crests break into spindrift; foam is blown in 
well-marked streaks 
High waves; dense streaks of foam; sea begins 9.5 
to roll; spray may affect visibility 
Very high waves with overhanging crests; 
sea-surface takes on white appearance as foam 
in great patches is blown in very dense streaks; 
rolling of sea is heavy and visibility reduced 
Exceptionally high waves; sea covered with long 
white patches of foam; small and medium-sized 
ships might be lost to view behind waves for long 
times; visibility further reduced 
Air filled with foam and spray; sea completely >15 
white with driving spray; visibility greatly reduced 
0 
0.1-0.2 
0.3-0.5 
0.6-1.0 
12.0 
15.0 
To simplify the theory of surface waves, we assume here that the wave-form 
is sinusoidal and can be represented bythe curves shown in Figures 1.1 and 
1.6. This assumption allows us to consider wave displacement (q) as simple 
harmonic motion, i.e. a sinusoidal variation in water level caused by the 
wave's passage. Figure 1.1 shows how the displacement varies over distance 
at a fixed instant in time - a 'snapshot' of the passing waves -whereas 
Figure 1.6 shows how wave displacement varies with time at a fixed point. 
Figure 1.6 The displacement of an idealized 
wave at a fixed point, plotted against time. 
Maximum and minimum displacements are 
recorded in fractions of the period, T. 
19 
3efore examining displacement, let us remind ourselves of the relationship 
9etween period and frequency. 
The displacement (q) of a wave at a fixed instant in time, or at a fixed point 
"n space, varies between +a (at the peak) and-a (in the trough). 
9isplacement is zero where L = 1L on Figure 1.1 (and at intervals of L/2 
along the distance axis). DiSplacement is also zero at T = 1T on Figure 1.6 
~and at intervals of T/2 along the time axis). 
The curves shown in Figures 1.1 and 1.6 are both sinusoidal. However, 
host wind-generated waves do not have simple sinusoidal forms. The 
steeper the wave, the further it departs from a simple sine curve. Very steep 
waves resemble a troctioidai curve, which is illustrated in Figure 1.7. 
:igure 1.7 Profile of trochoidal waves. 
A point marked on the rim of a car tyre will appear to trace out a trochoidal 
~urve as the car is driven past an observer. Invert that pattern and you have 
:he profile of a trochoidal water wave. We do not need to delve into the 
nathematical complexities of trochoidal wave forms here, because the 
~inusoidal model is sufficient for our purposes. 
20 
1.2.1 MOTION OF WATER PARTICLES 
Water particles in a wave in deep water move in an almost closed circular 
path. At wave crests, the particles are moving in the same direction as wave 
propagation, whereas in the troughs they are moving in the opposite 
direction. At the surface, the orbital diameter corresponds to wave height, 
but the diameters decrease exponentially with increasing depth, until at a 
depth roughly equal to half the wavelength, the orbital diameter is 
negligible, and there is virtually no displacement of the water particles 
(Figure 1.8(a)). This has some important practical applications. For 
example, a submarine only has to submerge about 150 m to avoid the effects 
of even the most severe storm at sea, and knowledge of the exponential 
decrease of wave influence with depth has implications for the design of 
stable floating oil rigs. 
It is important to realize that the orbits are only approximately circular. 
There is a small net component of forward motion, particularly in waves of 
large amplitude, so that the orbits are not quite closed, and the water, whilst 
in the crests, moves slightly further forward than it moves backward whilst 
in the troughs. This small net forward displacement of water in the direction 
o f wave travel is termed wave drift (see Figure 1.8(b)). In shallow water, 
where depth is less than half the wavelength and the waves 'feel' the sea- 
bed, the orbits become progressively flattened with depth (Figure 1.8(c) and 
(d)). The significance of these changes will be seen in Section 1.5, and in 
the Chapters on sediment movement. 
The orbital motions relevant to internal waves (Section 1.1.1) are shown in 
Figure 1.8(e): they are in opposite directions on either side of the interface. 
The passage of intemal waves can often be detected visually by secondary 
effects at the surface, especially if the upper layer (above the pycnocline) is 
not very thick and the sea is relatively calm. As the internal waves travel 
along, the upper layer becomes alternately thinner (over the internalwave 
crests) and thicker (over the troughs). The result is that there are 
convergences and divergences of water at the surface, as water is displacec 
back and forth between the thinner and thicker parts of the upper layer. 
A combination of these to-and-fro motions and the opposing particle orbits 
on either side of the interface may, under certain conditions, influence the 
movement of vessels with a draught comparable to the depth to the 
interface, sometimes causing an unexpected drag on the hull, thus making 
the vessels sluggish and difficult to handle. 
Sometimes the convergences compress short wavelength surface waves, 
making them more visible, but commonly they bring together organic 
material (especially oils released by marine organisms), which increases the 
surface tension and tends~ to suppress ripples, so that the water is smoother 
than elsewhere. Alternating bands of smooth and tippled surface water at 
intervals of a few hundred metres may thus indicate the passage of an 
internal wave, but whether ripples represent convergences or divergences 
depends upon local conditions. 
Zl 
:igure 1.8 (a) Particle motion in deep-water 
waves (depth greater than L/2), showing 
~xponential decrease of the diameters of the 
_~rbital paths with depth. 
~b) Particle motion in large deep-water waves, 
showing wave drift. 
~c) Particle motion in waves where water depth 
"s less than U2 but greater than U20 (see 
Section 1.2.3), showing both decrease in 
lorizontal orbital diameter and progressive 
:lattening of the orbits near the sea-bed. 
~d) Particle motion in shallow-water waves 
~depth less than L/20, see Section 1.2.3), 
showing progressive flattening of the orbits 
~but no decrease in horizontal diameter) near the 
sea-bed. 
~e) Particle motion in internal waves (Section 
1.1.1), and the convergences and divergences 
3ssociated with their passage. The orbits will 
)nly be truly circular if the layers are thick 
~nough (i.e. greater than half the wavelength). 
The orbital diameters decrease linearly (i.e. not 
]xponentially) with distance from the interface 
)ut may not reach zero at the free surface above 
:he interface (where any undulations do not 
lecessarily reflect those of the internal waves). 
]rbital motions are in opposite directions above 
]nd below the interface. 
1.2.2 WAVE SPEED 
As we have already hinted, there are mathematical relationships linking the 
characteristics of wavelength (L), wave period (T) and wave height (H) to 
wave speed in deep water and to wave energy. First, let us consider wave 
speed (c) (the c stands for 'celerity of propagation ' ). 
The speed of a wave can be ascertained from the time taken for one 
wavelength to pass a fixed point. As one wavelength (L) takes one wave 
period (T) to pass a fixed point, then: 
c= L/T (1.1) 
which is simply a form of the well-known expression: speed = distance/time. 
So, if we know any two of the variables in Equation 1.1, we can calculate 
the third. 
Two other terms you may meet in oceanographic literature are the wave 
number, k, which is 2re~L, and the angular frequency or, which is 2re~T; both 
of these relate to the sinusoidal nature of the idealized wave form. The units 
of k are m -1 (i.e. number of waves per metre), and the units of cr are s -1 
(i.e. number of cycles (waves) per second). 
1.2.3 WAVE SPEED IN DEEP AND IN SHALLOW WATER 
You may have noticed that when wave speeds have been mentioned we 
have been careful to state that the waves described were travelling in deep 
water. Thus you might have suspected that in shallow water, water depth 
has an effect on wave speed, because of interaction with the sea-bed. If so, 
you were quite right. Wave speed in any water depth can be represented by 
the general equation: 
c = tanh (1.2) 
where the acceleration due to gravity g = 9.8 m s -2, L = wavelength (m), and 
d = water depth (m). Tanh is a mathematical function known as the hyperbolic 
tangent. All you need to know about it in this context is that if x is small, 
say less than 0.05, then tanh x -- x, and if x is larger than n:, then tanh x -- 1. 
In summary, the implications of your answers to Question 1.7 in terms of 
factors affecting wave speed are as follows (cf. Figure 1.8): 
1 In water deeper than half the wavelength, wave speed depends upon the 
wavelength, and Equation 1.2 approximates to: 
~ gL 
c = (1.3) 
9,rc 
Diameters of circular particle orbits decrease exponentially downwards to 
near zero at depth = L/2 (Figure 1.8(a)). 
2 In water very much shallower than the wavelength (in practice, when 
d < L/20) , wave speed is determined by water depth, and Equation 1.2 
approximates to: 
c = ~f-gd i (1.4) 
Horizontal diameters of particle orbits remain constant in size with depth, 
but ellipticity increases downwards (Figure 1.8(d)). 
3 When d lies between L/20 and L/2, the full form of Equation 1.2 is 
required. Hence, to calculate wave speed you would need to know wavelength 
and depth, and have access to a set of hyperbolic tangent tables, or a calculator 
with hyperbolic functions on its keyboard. Particle orbits decrease in size 
downwards and become progressively more elliptical (Figure 1.8(c)). 
The answer to Question 1.7(a) (i.e. Equation 1.3) allows us to explore 
further the relationships between T and L. We saw in Equation 1.1 that 
c = L/T, so it is possible to combine Equations 1.1 and 1.3. 
The answer to Question 1.8 provides an equation expressing L in terms of T, i.e. 
L= gT2 (1.5) 
2n: 
A similar exercise, substituting the expression obtained for L from Equation 
1.5 into Equation 1.1, will give c in terms of T: 
gT 
c = ~ (1.6) 
2to 
Thus, it is possible, given only one of the wave characteristics c, T or L, to 
za!culate either of the other two. Moreover, by substituting the numerical 
values of the constants involved, the equations can be simplified as follows: 
Equation 1.3 becomes c = ~/i.56L 
Equation 1.5 becomes L = 1.56T 2 
Equation 1.6 becomes c = 1.56T 
(1.7) 
(1.8) 
(1.9) 
The answer to Question 1.10(c) highlights an important conclusion about 
wave speed in shallow water. Provided that depth is less than 1/20 of their 
:vavelengths, all waves will travel at the same speed in water of a .~iven depth. 
9_4 
1.2.4 ASSUMPTIONS MADE IN SURFACE WAVE THEORY 
The simple wave theory introduced above is a first-order approximation, 
and makes the following assumptions: 
1 The wave shapes are sinusoidal. 
2 The wave amplitudes are very small compared with wavelengths and 
depths. 
3 Viscosity and surface tension can be ignored. 
4 The Coriolis force (see Section 2.3) and vorticity (Section 1.1.1), which 
result from the Earth's rotation, can be ignored. 
5 The depth is uniform, and the bottom has no bumps or hummocks. 
6 The waves are not constrained or deflected by land masses, or by any 
other obstruction. 
7 That real three-dimensional waves behave in a way that is analogous to 
a two-dimensional model. 
None of the above assumptions is valid in the strictest sense, but predictions 
based on simple models of surface wave behaviour approximate closely to 
how wind-generated waves behave in practice. 
Those deep-water waves that have the greatest wavelengths and longest 
periods travel fastest, and thus are first to arrive in regions distant from the 
storm which generated them. This separation of waves by virtue of their 
differing rates of travel is known as dispersion, and Equation 1.3 
(c = ~/gL / 2 Jr) is sometimes known as the dispersion equation, because it 
shows that waves of longer wavelength (L) travel faster than shorter 
wavelength waves. 
The simple experiment of tossing a stone into a still pond shows that a band 
of ripples is created, which gets wider with increasing distance from the 
original disturbance.Ripples of longer wavelength progressively out- 
distance shorter ones - an example of dispersion in action. There is a 
second feature of the tipple band, which is not obvious at first sight. Each 
individual tipple travels faster than the band of tipples as a whole. A tipple 
appears at the back of the band, travels through it, and disappears out of the 
front. The speed of the band, called the group speed, is about half the wave 
speed of the individual tipples which travel through that band. 
To understand the relationship between wave speed and group speed, the 
additive effect of two sets of waves (or wave trains) needs to be examined. 
If the difference between the wavelengths of two sets of waves is relatively 
small, the two sets will 'interfere' and produce a single set of resultant 
waves. Figure 1.9 shows a simplified and idealized example of interference. 
Where the crests of the two wave trains coincide (i.e. they are 'in phase'), 
the wave amplitudes are added, and the resultant wave has about twice the 
amplitude of the two original waves. Where the two wave trains are 'out of 
phase', such that the crests of one wave train coincide with the troughs of 
the other, the amplitudes cancel out, and the water surface has minimal 
displacement. 
25 
:igure 1.9 (a) The merging of two wave trains 
ishown in red and blue) of slightly different 
~vavelengths (but the same amplitudes), to form 
.rave groups (b). 
:igure 1.10 The relationship between wave 
speed (phase speed) and group speed. As the 
wave advances from left to right, each wave 
~noves through the group to die out at the front 
~e.g. wave 1), as new waves form at the rear 
~e.g. wave 6). In this process, the distance 
:ravelled by each individual wave as it moves 
:rom the rear to front of the group is twice that 
:ravelled by the group as a whole. Hence, the 
wave speed is twice that of the group speed. 
The two component wave trains thus interact, each losing its individual 
identity, and combine to form a series of wave groups, separated by regions 
almost free from waves. The wave group advances more slowly than 
individual waves in the group, and thus in terms of the occurrence and 
propagation of waves, group speed is more significant than speeds of the 
individual waves. Individual waves do not persist for long in the open 
ocean, only as long as they take to pass through the group. Figure 1.10 
shows the relationship between wave speed (sometimes called phase speed) 
and group speed in the open ocean. 
The group speed is half the average speed of the two wave trains, and for 
your interest we present below an abbreviated form of how this relationship 
is derived. It is not necessary to follow all the steps that lead to Equation 
1.10 (overleaf), still less to memorize them. 
If two sets of waves are interfering to produce a succession of wave groups, 
the group speed (Cg) is the difference between the two angular frequencies 
(or I and or2) divided by the difference between the two wave numbers (k 1 
and k2 respectively), i.e. 
(71 -- 0"2 
Cg = kl - k2 
_)15 
We have seen (Question 1.6) that c = or~k, and we know (Section 1.2.2) that 
angular frequency, or, can be expressed in terms of T, also that wave number 
k, can be expressed in terms of L. In addition, we know that Equations 1.6 
and 1.3, respectively, enable us to express both T and L in terms of c 
(Section 1.2.3). Hence, Cg can be expressed in terms of the respective 
speeds, cl and c2, of the two wave trains. The equation obtained is: 
Cg " - ~ 
C 1 X C 2 
C 1 + C 2 
If C l is nearly equal to c2, this equation simplifies to" 
Cg~ c2/2c 
or r c/2 (1.10) 
where c is the average speed of the two wave trains. 
Equation 1.2 shows that as the water becomes shallower, wavelength 
becomes less important, and depth more important, in determining wave 
speed. As a result, in shoaling water, wave (phase) speed decreases, 
becoming closer to group speed. Eventually, at depths less than L/20, all 
waves travel at the same depth-determined speed, there will be no wave- 
wave interference, and therefore in effect each wave will represent its own 
'group'. Thus, in shallow water, group speed can be regarded as equal to 
wave (phase) speed. 
The energy possessed by a wave is in two forms: 
1 kinetic energy, which is the energy inherent in the orbital motion of the 
water particles; and 
2 potential energy possessed by the particles as a result of being displaced 
from their mean (equilibrium) position. 
For a water particle in a given wave, energy is continually being converted 
from potential energy (at crest and trough) to kinetic energy (as it passes 
through the equilibrium position), and back again. 
The total energy (E) per unit area of a wave is given by" 
E= 1 -~ (pgH 2 ) (1.11) 
where p is the density of the water (in kg m-3), g is 9.8 m s -z, and H is the 
wave height (m). The energy (E) is then in joules per square metre (J m-Z). 
Equation 1.11 shows that wave energy is proportional to the square of the 
wave height. 
27 
1.4.1 PROPAGATION OF WAVE ENERGY 
Figures 1.9 and 1.10 show that waves travel in groups in deep water, with 
areas of minimal disturbance between groups. Individual waves die out at 
the front of each group. It is obvious that no energy is being transmitted 
across regions where there are no waves, i.e. between the groups. It follows 
that the energy is contained within the wave group, and travels at the group 
speed. The rate at which energy is supplied at a particular location (e.g. a 
beach) is called wave power, and is the product of group speed (Cg) and 
wave energy per unit area (E), expressed per unit length.of wave crest. 
1.4.2 ATTENUATION OF WAVE ENERGY 
Wave attenuation involves loss or dissipation of wave energy, resulting in a 
reduction of wave height. Energy is dissipated in four main ways: 
1 White-capping, which involves transfer of wave energy to the kinetic 
energy of moving water, thus reinforcing the wind-driven surface current 
(Section 1.1.2). 
2 Viscous attenuation, which is only important for very high frequency 
.~apillary waves, and involves dissipation of energy into heat by friction 
between water molecules. 
3 Air resistance, which applies to large steep waves soon after they leave the 
area in which they were generated and enter regions of calm or contrary winds. 
4 Non-linear wave-wave interaction, which is more complicated than 
the simple (linear) combination of frequencies to produce wave groups as 
autlined in Section 1.3. 
Non-linear interaction appears to be most important in the frequency range 
3.2 to 0.3 s -1. Groups of three or four frequencies can interact in complex 
:aon-linear ways, to transfer energy to waves of both higher and lower 
frequencies. A rough but useful analogy is that of the collision of two drops of 
water. A linear combination would simply involve the two drops coalescing 
(adding together) into one big drop, whereas a non-linear combination is akin 
~.o a collision between the drops so that they split into a number of drops of 
differing sizes. The total amount of water in the drops (analogous to the total 
amount of energy in the waves) is the same before and after the collision. 
Thus, non-linear wave-wave interaction involves no loss of energy in itself, 
~ecause energy is simply 'swapped' between different frequencies. 
Jowever, the total amount of energy available for such 'swapping' will 
~radually decrease, because higher frequency waves are more likely to 
dissipate energy in the ways described under 1 and 2 above. For example, 
aigher frequency waves are likely to be steep, and thus more prone to 
white-capping. Wave attenuation is greatest in the storm-generating area, 
where there are waves of many frequencies, and hence more opportunities 
:or energy exchangebetween them. 
28 
1.4.3 SWELL 
The sea-surface is rarely still. Even when there is no wind, and the sea 
'looks like a mirror', a careful observer will notice waves of very long 
wavelength (say 300 to 600 m) and only a few centimetres amplitude. At 
other times, a sea may include locally generated waves of small wavelength, 
and travelling through these waves, possibly at a large angle to the wind, 
other waves of much greater wavelength. Such long waves are known as 
swell, which is simply defined as waves that have been generated elsewhere 
and have travelled far from their place of origin. If you look out to sea on a 
calm day, the waves that you see will be swell waves from a distant storm. 
Figure 1.11 (a) The spreading of swell from a storm centre, showing the area in which swell 
might be expected. As distance from the storm increases, the length of the wave crest 
increases, with a corresponding decrease in wave height and energy per unit length of wave - 
spreading loss, discussed opposite. 
(b) Wave record near a storm centre. 
(c) Wave record of swell, well away from the storm centre. 
29 
Systematic observations show that local winds and waves have very little 
effect on the size and progres s of swell waves, and swell seems able to pass 
through locally generated seas without hindrance or interaction. Once swell 
waves have left the storm area, their wave height gradually diminishes, 
chiefly because the wave crests lengthen over a progressively wider front 
(Figure 1.11 (a)) but also because of energy loss caused by air resistance to 
steep waves (item 3 of Section 1.4.2). Once wave height has diminished to a 
few tens of centimetres, swell waves are not steep enough to be 
significantly influenced by local winds. 
In the ocean, we find waves travelling in many directions, resulting in a 
confused sea. To achieve a complete description of such a sea-surface, the 
amplitude, frequency and direction of travel of each component are needed. 
The energy distribution of the sea-surface (cf. Figure 1.4) can then be 
calculated, but, as you might imagine, such a complex process requires 
expensive equipment to measure the wave characteristics, and computer 
facilities to perform the necessary calculations. 
One or more components of a confused sea may be long waves or swell 
resulting from distant storms. In practice, about 90% of the sea-surface 
energy generated by the storm propagates within an angle of 30 ~ to 45 ~ 
either side of the wind direction. Consequently, waves generated by a storm 
in a localized region of a large ocean radiate outwards as a segment of a 
circle (Figure 1.11 (a)). As the circumference of the circle increases, the 
energy per unit length of wave crest must decrease (and so must wave 
height), so that the total energy of the wave front remains the same. This 
decrease in energy per unit length of wave crest is known as spreading loss 
(of wave energy), and in the case of established swell waves there is very 
little loss of wave energy apart from that caused by spreading over a 
progressively wider front. 
The waves with the longest periods travel fastest, and progressively out- 
distance waves of higher frequencies (shorter periods). Near to the storm, 
dispersion is likely to be minimal (Figure 1.11 (b)), but the further one 
moves from the storm location, the more clearly separated waves of 
differing frequencies become, resulting in the regular wave motions we 
know as swell (Figure 1.11 (c)). 
-igure 1.12 Wave-energy spectra, each 
:letermined from wave heights measured over a 
3hort time interval, for two areas (a) and (b) in 
:he same ocean (not to scale). One area is a 
~torm centre, and the other is far away from the 
~torm. (For use with Question 1.13.) 
If you recorded the waves arriving from a storm a great distance (over 
1000 km) away, you would, as time progressed, see the peak in the wave- 
energy spectrum move progressively towards higher frequencies (i.e. 
shorter periods). By recording the frequencies of each of a series of swell 
waves arriving at a point, it would be possible to calculate each of their 
speeds. From the set of speeds, a graph could be plotted to estimate the time 
and place of their origin. Before the days of meteorological satellites, this 
method was often used to pinpoint where and when storms had occurred in 
remote parts of the oceans. 
3U 
1.4.4 USES OF WAVE ENERGY 
Wave energy is a potential source of pollution-free 'alternative energy', 
and has been used for some time on a small scale, e.g. to recharge 
batteries on buoys carrying navigation lights (see below). Harnessing 
wave power on a large scale presents a number of problems: 
1 Prevailing sea conditions must ensure a supply of waves with 
amplitudes sufficient to make conversion worthwhile. 
2 Installations must not be a hazard to navigation, or to marine 
ecosystems. The nature of wave energy is such that rows of converters 
many kilometres in length are needed to generate amounts of electricity 
comparable with conventional power stations. These would form offshore 
barrages which might interfere with shipping routes, although sea 
conditions would be made calmer on the shoreward side. Calmer 
conditions, however, lead to reduced water circulation, less sediment 
transport, and increased growth of quiet-water plants and animals. 
Pollutants are less easily flushed away from such an environment. 
Some of these problems can be avoided by use of another type of wave- 
energy converter, the circular 'clam' or 'atoll', designed so that waves 
from any ~ direction are guided by a system of radiating vanes to a central 
vertical channel where the water spirals downwards to drive a turbine and 
generator. Such converters would be deployed in arrays rather than in long 
rows, but they are big, and many of them would be required to generate 
useful amounts of power commercially. For example, a 60 m diameter 
'clam' could generate an average of about 600 kW, so many hundreds 
would be needed to equal the power provided by even one conventional 
fossil-fuel or nuclear power station. 
3 The capital cost of such floating power stations and their related 
energy transmission and storage systems is enormous. Installations need 
to be robust enough to withstand storm conditions, yet sensitive enough to 
be able to generate power from a wide range of wave sizes. Such 
conditions are expensive to meet, and make it difficult for large-scale 
wave-energy schemes to be as cost effective as conventional energy 
sources. 
A large (2 MW) oscillating water column converter (OSPREY = Ocean 
Swell Powered Renewable EnergY) was installed off northern Scotland in 
1995. Soon afterwards it was extensively damaged by storms and had to 
be taken ashore for repairs, which set back the UK wave-energy 
programme by some years. Relatively small-scale utilization of wave 
power is more feasible. For example, oscillating water-column converters 
provide power for both buoys and lighthouses in several parts of the 
world. 
Other approaches have been demonstrated by the Norwegians, who in 
1985 brought into operation a wave-powered generator of 850 kW. This 
machine was sited on the west coast of Norway, where waves were 
funnelled into a narrow bay and increased substantially in height and thus 
in energy. Unfortunately, this installation also was wrecked by storms a 
few years later, but similar schemes have been successfully developed 
elsewhere. 
31 
-igure 1.13 Plan view illustrating changes in 
:he speed of waves approaching the shore. Grey 
ines represent wave crests at depths dl and d2. 
Vave rays (dashed blue lines) are at right angles 
ii.e. normal) to the wave crests. For further 
3xplanation, see text. 
It is a matter of common observation that waves coming onto a beach increase 
in height and steepnessand eventually break. Figure 1.13 shows a length of 
wave crest, s, which is directly approaching a beacK As the water is shoaling, 
the wave crest passes a first point where the water depth (dl) is greater than at a 
second point nearer the shore (where the depth is d2). We assume that the 
amount of energy within this length of wave crest remains constant, the wave is 
not yet readyto break, and that water depth is less than 1/20 of the wavelength 
(i.e. Equation 1.4 applies: c = ~/gd ). Because wave speed in shallow water is 
related to depth, the speed Cl at depth dl is greater than the speed c2 at depth d2. 
If energy remains constant per unit length of wave crest, then 
t 
ElClS = E2c2s 
or E2 = Cl (1.12) 
E1 c2 
and because energy is proportional to the square of the wave height 
(Equation 1.11) then we can write 
E2 Cl H2 2 
E1 r H12 (1.13) 
Thus, both the square of the wave height and wave energy are inversely 
proportional to wave speed in shallow water. 
This is quite a difficult question, best answered by considering the highly 
simplified case illustrated in FigUre 1.14. Imagine waves travelling shoreward 
over deep water (depth greater than half the wavelength). Wave speed is then 
governed solely by wavelength (Equation 1.3, c = ~/gL / 2 Jr. The energy is 
being propagated at the group speed (Cg) which is approximately half the 
wave speed (c), Section 1.3. As the waves move into shallower water, wave 
speed becomes governed by both depth and wavelength (Equation 1.2), but 
once the waves have moved into shallow water, where d < L/20, wave speed 
becomes governed solely by depth (Equation 1.4) and is much reduced. 
Remember from Section 1.3 that in shallow water group speed is equal to 
wave speed. The rate at which energy arrives from offshore (Figure 1.14, 
overleaf) must be equal to the rate at which energy moves inshore; so if the 
group speed in shallow water is less than half the original wave speed (and 
hence less than the original group speed) in deep water, the waves will show 
corresponding increases in height and in energy per unit area. 
However, it is essential to realize that while the energy and height of 
individual waves will increase as they enter shallow water, the rate of 
supply of wave energy (wave power, Section 1.4.1) must remain constant 
(ignoring frictional losses). 
As mentioned earlier, when waves move into shallow water, the waves begin 
to 'feel the bottom', the circular orbits of the water particles become flattened 
(Figure 1.8(c) and (d)), and wave energy will be dissipated by friction at the 
sea-bed, resulting into-and-fro movement of sediments. The gentler the slope 
of the immediate offshore region, the sooner the incoming waves will 'feel' 
the bottom, the greater will be the friction with the sea-bed and the greater the 
energy loss before the waves finally break (see Section 15.2). 
~z 
Cl >c2 >c3 
Cgl > Cg2 > Cg 3 
individual waves travel at Cl = ~fgL/2n 
b 
energy travels at cgl (= �89 cl) energy travels at cg2 (where c2 > %2 > -} c2) 
l 
I 
progressive decrease in wave speed (c) and group speed (co) 
individual :/gL tanh( -~) waves c2 ~ all waves travel at c3 = 
travel at b "- 
IF ~ 
energy travels at Cg 3 ( = C3) 
Figure 1.14 Vertical section (not to scale) 
illustrating changes in the relationship between 
wave speed and group speed, and how this 
affects the speed of energy propagation as waves 
move from deep to shallow water. The energy is 
being brought in from offshore at the same rate 
as it is being removed as the waves break at the 
shore (see Section 1.5.2). As group speed (cg) in 
shallow water is less than in deep water, then the 
waves in shallow water must have more energy 
per unit length of wave crest, and a greater wave 
height than the waves in deep water. 
1.5.1 WAVE REFRACTION 
Figure 1.15 shows an idealized linear wave crest (length S1, between A and B) 
approaching a shoreline at an angle. Because the waves are travelling in 
shallow water, their speed is depth-determined (Equation i.4, c = ~/gd ). 
The depth at A exceeds the depth at B, so the wave at A will travel faster 
than the wave at B, leading to the phenomenon known as refraction, which 
will tend to 'swing' the wave crest to an alignment parallel with the depth 
contours. 
Refraction of waves in progressively shallowing (shoaling) water can be 
described by a relationship equivalent to Snell's law, which describes 
refraction of light rays through materials of different refractive indices. 
Rays can be drawn perpendicular to the wave crests, and will indicate the 
direction of wave movement. The angle between these wave rays and lines 
drawn perpendicular to the depth contours can be related to wave speeds at 
various depths. In Figure 1.15, a wave ray approaching shoaling water at an 
angle 01, where water depth is d 1, will be at an angle 02 when it reaches 
depth d2. Angles 01 and 02 are related to wave speed by: 
sin01 : c1 : g~ _ ~ _ I dl 
sin02 c2 - -~2 -~2 - (1.14; 
where cl and c~ are the respective wave speeds at depths dl and d2. 
;5;5 
:igure 1.15 Plan view illustrating the 
�9 elationship between wave approach angle (0); 
Jvater depth (d), and length of wave crest (s). 
The wave rays (broken blue lines), are normal to 
-he wave crests, and are the paths followed by 
)oints on the wave crests. For further 
~xplanation, see text. 
Well, of course, one could do that, and obtain analogous relationships 
between the relevant angles, depths and wave speeds. However, as you will 
see presently, wave rays are often more useful than wave crests in 
determining regions that are likely to experience waves that are higher or 
lower than normal beCause of refraction. 
Consider a length, Sl, of ideal wave crest, with energy per unit length E l, 
which is bounded by two wave rays, as in Figure 1.15. To a first approximation, 
we may assume that the total energy of the wave crest between these two 
rays will remain constant as the wave progresses. Therefore, if the two rays 
converge, the same amount of energy is contained within a shorter length of 
wave crest, so that, for the total wave energy to remain constant, the wave 
height will have to increase (Equation 1.11). Conversely, if the wave rays 
were to diverge, then the wave height would decrease. 
If, as they finally approach the shore, the two wave rays are separated by a 
length s2, as in Figure 1.15, and if the wave energy is conserved, then the 
final wave energy must equal the initial wave energy, i.e. ElS 1 = E2s2, or in 
terms of wave heights (remember Equation 1.11): 
H12s1 = H22s2 (1.15) 
For simplicity, s2 in Figure 1.15 is the same length as s l, but it is common 
for wave rays to converge or diverge, and in general they converge (focus) 
on headlands and diverge in bays (Figure 1.1 6). 
In more complicated situations, wave refraction diagrams can be plotted for 
a region by using the wave of most common period and the most common 
direction of approach, and in this way areas in which wave rays are focused 
or defocused can be identified. 
igure 1.16 Waves are refracted and the wave 
:ays show how wave energy is focused on 
leadlands, where erosion is active, while 
Jeposition occurs in the bays, where the wave 
ays diverge and wave energy is less. Waves 'feel 
:he bottom' and are slowed first in the shallow 
areas off the headland. The parts of the wave 
:ronts that move through the deeper water 
3ading into the bays are not slowed until they 
are well into the bays. 
:~4 
:igure 1.17 (a) Bathymetric map of the 
continental shelf off New York harbour at the 
~nouth of the Hudson River on the Atlantic coast 
)f the USA. The rectangle shows the area of map 
ib). The position of the Hudson Canyon can be 
Jeduced from the submarine contours (in 
athoms). 
ib) Pattern of wavecrests (wave fronts) and 
rave rays off part of Long Branch beach.The 
t~ave fronts are drawn at intervals of 45 waves of 
)eriod 12 s. 
35 
We can estimate increase or decrease in wave size by measuring the 
tistances between wave rays, and applying Equation 1.15. This method is 
luite useful provided wave rays neither approach each other too closely nor 
:ross over, as in these cases the waves become high, steep and unstable, and 
simple wave theory becomes inadequate. 
1.5.2 WAVES BREAKING UPON THE SHORE 
As a wave breaks upon the shore, the energy it received from the wind is 
Jissipated. Some energy is reflected back out to sea, the amount depending 
Jpon the slope of the beach- the shallower the angle of the beach slope, the 
less energy is reflected. Most of the energy is dissipated as heat and sound 
,'the 'roar' of the surf) in the final small-scale mixing of foaming water, sand 
and shingle. Some energy is used in fracturing large rock or mineral 
9articles into smaller ones, and yet more may be used to move sediments 
and increase the height and hence the potential energy of the beach form. 
This last aspect depends upon the type of waves. Small gentle waves and 
swell tend to build up beaches, whereas storm waves tear them down (see 
also Chapter 5). 
A breaking wave is a highly complex system. Even some distance before 
:he wave breaks, its shape is substantially distorted from a simple sinusoidal 
wave. Hence the mathematical model of such a wave is more complicated 
than we have assumed in this Chapter. 
Four major types of breaker can be identified, though you may often see 
breakers of intermediate character and/or of more than one type on the same 
beach at the same time. 
1 Spilling breakers are characterized by foam and turbulence at the wave 
crest. Spilling usually starts some distance from shore and is caused when a 
layer of water at the crest moves forward faster than the wave as a whole. 
Foam eventually covers the leading face of the wave, and such waves are 
characteristic of a gently sloping shoreline. A tidal bore (Section 2,4.3) is an 
extreme form of a spilling breaker. Breakers seen on beaches during a 
storm, when the waves are steep and short, are of the spilling type. They 
dissipate their energy gradually as the top of the wave spills down the front 
of the crest, which gives a violent and formidable aspect to the sea because 
of the more extended period of breaking. 
2 Plunging breakers are the most spectacular type. The classical form, much 
beloved by surf-riders, is arched, with a convex back and concave front. The 
crest curls over and plunges downwards with considerable force, dissipating 
its energy over a short distance. Plunging breakers on beaches of relatively 
gentle slope are usually associated with the long swells generated by distant 
storms. Locally generated storm waves seldom develop into plunging 
breakers on gently sloping beaches, but may do so on steeper ones. The 
i i i 
energy dissipated by plunging breakers is concentrated at the plunge point 
(i.e. where the water hits the bed) and can have great erosive effect. 
3 Collapsing breakers are similar to plunging breakers, exceptthat the 
waves may be less steep and instead of the crest curling over, the front face 
collapses. Such breakers occur on beaches with moderately steep slopes, 
and under moderate wind conditions, and represent a transition: from 
plun~in~to sur~in~ breakers. 
5b 
37 
4 Surging breakers are found on the very steepest beaches. Surging 
breakers are typically formed from long, low waves, and the front faces and 
crests thus remain relatively unbroken as the waves slide up the beach. 
Figure 1.18 illustrates the relationship between wave steepness, beach 
steepness and breaker type. 
The way breaker shape changes from top to bottom of the picture depends 
upon: 
1 Increasing beach slope (if considered independently from wave 
characteristics). 
2 Increasing wavelength and period and correspondingly decreasing wave 
steepness, if these characteristics are considered independently of beach slope. 
It is not always possible to consider 1 and 2 separately, because as you will 
see in later Chapters, beach slope is partly influenced by prevailing wave type 
and partly by the particle sizes of the beach sediments, which in turn depend 
upon the energy of the waves which erode, transport and deposit them. 
From the descriptions, Figure 1.18, and the answer to Question 1.15, it can 
be seen that the four types of breaker form a continuous series. The spilling 
breaker, characteristic of shallow beaches and steep waves (i.e. with short 
periods and large amplitudes), forms one end of the series. At the other end 
of the series is the surging breaker, characteristic of steep beaches and of 
waves with long periods and small amplitudes. For a given beach, the 
arrival of waves steeper than usual will tend to give a type of breaker nearer 
the 'spilling' end of the series, whereas calmer weather favours the surging 
type. The dynamics of collapsing (3) and surging (4) breakers are affected 
by bottom slope more than those of spilling (1) and plunging (2) breakers. 
Spilling and plunging breakers can also occur in deep water, partly because 
the sea-bed is far below and does not affect wave dynamics. Collapsing and 
surging breakers do not occur in deep water. 
-igure 1.18 (a) The four types of breaker 
seen in perspective view from top to bottom 
~1-4): spilling, plunging, collapsing, 
surging. The vertical arrow shows their 
elationships to beach slope, wave period, 
3ngth and steepness. 
~b) Cross-sections through the four 
breaker types. 
~c) Photograph of a breaker, part spilling, 
)art plunging. See text for further 
Jiscussion. 
IMPORTANs When examining Figure 1.18, 
tou need to be aware that the four types of 
creaker illustrated are just stages in a 
continuous spectrum; changes from one to 
]nother are gradual, not instantaneous. 
3t~ 
Waves of unusual character may result from any one of a number of 
conditions, such as a particular combination of wave frequencies; the 
constraining effect of nearby land masses; interaction between waves and 
ocean currents; or a submarine earthquake. The destructive effects of 
abnormally large waves are well known, and prediction of where and when 
they will occur is of extreme importance to all who live or work beside or 
upon the sea. 
1.6.1 WAVES AND CURRENTS 
Anyone who regularly sails a small boat into and out of estuaries will be 
well aware that at certain states of the tide the waves can become 
abnormally large and uncomfortable. Such large waves are usually 
associated with waves propagating against an ebbing fide. Because the 
strength of the tidal current varies with position as well as with time, waves 
propagating into an estuary during an ebb tide often advance into 
progressively stronger counter-currents. The only ocean waves that can 
disturb the estuary as a whole during an ebbing tide are those that have 
speeds sufficiently high to overcome the effects of the counter-current. 
Consider a simple system of deep-water waves, moving from a region with 
little or no current (A) into another region (B) where there is a current 
flowing parallel to the direction of wave propagation. Imagine two points, 
one in region A and one in region B, each of which are fixed with respect to 
the sea-bed. The number of waves passing each point in a given time must 
be the same, otherwise waves would either have to disappear, or be 
generated, between the two points. In other words, the wave frequency (and 
period) must be the same at each point. 
How will wavelength and wave height be affected if the current is flowing 
(a) with or (b) against the direction of wave propagation? 
Clearly, a current flowing with the waves will have theeffect of increasing the 
speed of the waves, although the wave period (T) must remain constant, i.e. 
T=Lo= L 
c o c+u 
where Lo = wavelength when current is zero; 
Co = wave speed when current is zero; 
L = wavelength in the current; 
c = wave speed in the current; 
u = speed of the current 
Because c+ u is greater than Co, then if T is to remain constant, L must be 
greater than L0, i.e. the waves get longer. Moreover, the waves get 
correspondingly lower, because the rate of energy transfer depends upon 
group speed (half wave speed) and wave height. If the rate of energy 
transfer is to remain constant, then as wave speed increases, wave height 
(1.16~ 
39 
must decrease. However, in practice, not all of the wave energy is retained 
in the wave system: some is transferred to the current, causing wave height 
to decrease still further. 
Conversely, if the current flows counter to the direction of wave 
propagation, then L will decrease and the waves will get shorter and higher. 
Wave height will be further increased as a result of energy gained from the 
current. In theory, a point could be reached where wave speed is reduced to 
zero, so that a giant wave builds up to an infinite height (it can be shown 
mathematically ~ that this occurs when the counter-current exceeds half the 
group speed of the wave in still water). However, in practice, as waves 
propagate against a counter-current of ever-increasing strength, they 
become shorter, steeper and higher until they become unstable and break; 
so waves do not propagate against a counter-current of more than half their 
group speed. 
As currents affect wave speed, they can also refract waves, i.e. change their 
direction of propagation. In such situations, the refraction diagram of the 
wave rays can be plotted in a similar way to that outlined in Section 1.5.1 
(Figure 1.19(b); see also Section 1.6.2). 
"-igure 1.19 (a) (right) Giant waves have been 
�9 ecorded in the vicinity of the Agulhas Current 
',area shaded in mauve). Thinner, darker blue 
arrows show current direction, and thicker, 
ighter blue arrows indicate the direction of wave 
~ovement. The irregular black line is the 100 
7athom contour. 
ib) Diagram to illustrate how waves might be 
�9 efracted and wave energy focused by lateral 
shear in a counter-current (i.e. flowing against 
the direction of wave propagation). The lengths 
)f the solid blue arrows are proportional to the 
~urrent velocity, curved solid lines are wave 
~rests, and curved broken arrows are wave rays. 
Nave rays are focused by counter-currents in 
lnuch the same way as they are at headlands. 
1.6.2 GIANTWAVES 
The cultures of all seafaring nations abound with legends of ships being 
swamped by gigantic waves, and of sightings of waves of almost 
unbelievable size. 
An early objective method for estimating the height of large waves was to 
send a seaman to climb the rigging until he could just see the horizon over 
the top of the highest waves when the ship was in a wave trough. This 
technique was used by the Venus during her circumnavigation of the world 
from 1836 to 1839. She did not meet any particularly high waves during her 
voyage - the highest estimated by this method was about 8 m high, off Cape 
Horn. The highest reliably measured wave was encountered by the US 
tanker Ramapo, en route from Manila to San Diego across the North Pacific 
in 1933, when she was overtaken by waves having heights up to 34 m. 
A region of the ocean that is infamous for encounters with giant waves is 
the Agulhas Current off the east coast of South Africa (Figure 1.19(a)). 
Waves travelling north-east fro m the southern Atlantic Ocean tend to be 
refracted and focused by the current, and wave rays can be plotted, as 
outlined in Section 1.5.1, and illustrated diagrammatically in Figure 1.19(b)); 
and they are further steepened and shortened by the counter-current effect 
outlined in Section 1.6.1. Wave periods of 14 s, with correspondingly long 
wavelengths of about 300 m, are quite common. Wave heights in this region 
can be of the order of 30 m which would result in a very steep wave 
(steepness = 0.1). Such high and steep waves are sometimes preceded by 
correspondingly deep troughs, which are particularly dangerous as they can 
only be seen by vessels that are on the crest of the preceding wave. 
Look again at Figure 1.5. The high wave occurring 122 s into the wave 
record is preceded by a particularly deep trough, but that is not the case for 
the high wave occurring at 173 s. As we saw in Section 1.1.4, ocean waves 
are rarely regular, and it is usually not possible to predict the heights of 
individual waves, nor the depths of individual troughs. 
Before dismissing the sailor's claim in Question 1.16 as a tall story, let us 
examine it more closely. Let us suppose his ship was travelling in the same 
direction as the waves and was being overtaken by them, and he had made 
the simple mistake of not taking account of the ship's velocity with respect 
to the waves when timing the intervals between successive peaks. 
41 
1.6.3 TSUNAMIS 
Tsunami is a Japanese word for ocean waves of very great wavelength. 
Such waves are caused chiefly by seismic disturbances (earthquakes), but 
also by slumping of unstable masses of submarine sediment or rock (see 
Chapter 3), and by 'splashdown' of comets or asteroids in the sea. Among 
the most famous tsunamis is the one triggered by the Lisbon earthquake of 
1755, which caused at least as much destruction as the earthquake itself. 
Although commonly referred to as 'tidal waves', tsunamis are not related to 
the tides. Tsunamis commonly have wavelengths of the order of hundreds of 
kilometres, so even in the open ocean, the ratio of wavelength to depth is 
such that a tsunami travels as a shallow-water wave, i.e. its speed is always 
governed by the depth of ocean over which it is passing. 
Although a tsunami travels at great speed in the open ocean, its wave height is 
small, usually in the order of one metre, and so it often remains undetected. 
Dn reaching shallow coastal waters, however, the speed diminishes, while the 
oower of the wave remains the same (Section 1.4.1). Hence the wave energy 
(and therefore the wave height, Equations 1.11 and 1.13) must increase. 
,,qreat destruction can be wreaked by a tsunami. It is not unknown for 
people on board ships at anchor offshore to be unaware of a tsunami passing 
beneath them, but to witnessthe adjacent shoreline being pounded by large 
waves only a few seconds later. Tsunamis occur most frequently in the 
Pacific, because that ocean experiences frequent seismic activity, 
9articularly around its margins. Accurate earthquake detection can give 
warning of the approach of tsunamis to coasts some distance from the 
earthquakes. Around and across the Pacific Ocean is a long-established 
system of warning stations, of which Honolulu is the administrative and 
geographical centre. 
1.6.4 SEICHES 
A seiche is a standing wave, which can be considered as the sum of two 
?rogressive waves travelling in opposite directions (Section 1.1). Seiches 
:an occur in lakes, and also in bays, estuaries or harbours which are open to 
-he sea at one end. A seiche can be approximately modelled by sliding up 
and down in the bath, o r - perhaps more accurately - with a flat dish 
zontaining water, gently moving it to and fro and setting the water into 
?scillatory motion, as often happens inadvertently when the tray below the 
Yreezer compartment of a defrosted refrigerator is removed, and the water 
starts sloshing back and forth. 
n most bays and estuaries, the water is relatively shallow compared with 
:he seiche wavelength (L), and the period of the seiche is determined by the 
ength of the basin and the depth of water in it. Figure 1.20(a, b) (overleaf)shows the idealized water motions in a seiche in a closed basin (e.g. a lake). 
At either end of the container, water level is alternately high and low, 
~vhereas in the middle the water level remains constant. The length of the 
:ontainer (1) corresponds to half the wavelength (L) of the seiche. 
4Z 
Figure 1.20 (a) Diagrammatic cross-sections showing successive positions (1 to 9) of the water 
surface and accompanying water movements in a simple standing wave or seiche in a closed basin. 
(b) Summary diagram of a seiche in a closed basin, showing that maximum vertical m~)tion 
occurs at the antinode, and maximum horizontal motion occurs at the node. 
(c) Diagrammatic cross-section of a quarter-wavelength standing wave in a small harbour. 
(d) Sections showing successive positions of the water surface and accompanying water 
movements in a seiche in a harbour or small bay, in sequence 1 to 4: water flows out of the 
basin (2) as the wave crest falls, and flows back in (4) as the wave trough fills. 
4~ 
Where the water level is constant (the node), the horizontal flow of 
water from one end of the container to the other is greatest, as the crest 
and trough of the seiche alternate at either end of the basin. Where the 
fluctuation of water level is greatest (the antinodes, ateither end of the 
basin), there is minimal horizontal movement of the water. These 
oscillatory water movements in a seiche in a closed basin are 
summarized in the idealized cross-section, Figure 1.20(b). 
If the water depth divided by the length of the container is less than 0.1, 
then the waves can be considered to behave as shallow-water waves, 
with speed - ~gd, and the period of oscillation, T (in seconds), is 
given by: 
21 
T = (1.17) ~/gd 
where 1 = length of container (in metres); d = depth (in metres); and 
g= 9.8ms -2. 
In some basins open to the sea at one end, i.e. in some bays and 
e~tuaries, it is possible for a node to occur at the entrance to the basin 
and an antinode at the landward end. Figure 1.20(c) is an idealized 
vertical section of such a situation, and Figure 1.20(d) shows the 
zorresponding oscillatory water movements. In this case, the length of 
"_-he basin (l) corresponds to a quarter of the wavelength of the seiche 
~L). The corresponding equation for the period is therefore: 
41 
T= ~ (1.18) ggd 
T is here known as the resonant period. 
For standing waves to develop, the resonant period of the basin must be 
equal to the period of the wave motion or to a small whole number of 
nultiples of that period. 
Your answer to Question 1.19 is an example of how the arrival of 
waves of a certain frequency can create problems for moored vessels in 
small harbours by setting up a standing wave. Just as the seiche in a fiat 
:!ish will 'slop over' if your standing wave gets too big, so a standing 
,vave in a harbour may dash vessels against the harbour wall, or even 
throw them ashore. When the standing wave is at the low point of the 
antinode, there is also the danger of vessels being grounded, thus 
suffering damage to their hulls. 
.~4 
:igure 1.21 Solar-powered directional wave 
}uoy (which in use is moored to the sea-bed). 
Ihe buoy contains sensors that measure roll, 
)itch and yaw, as well as wave displacement, 
Jelocity and acceleration. 
Various instruments have been devised to measure wave characteristics. For 
example, a pressure gauge can be placed upon the sea-floor and will detect 
changes in the pressure (and therefore height) of the water column above it, 
and hence the frequency and size of waves at the surface (see Figure 4.16(a)). 
Pressure gauges with a sensitivity of about one part in a million are 
available and such gauges can detect pressure changes corresponding to a 
water level difference of less than a centimetre in a depth of several 
thousand metres of water. Another method is to place instruments such as 
accelerometers and pitch-and-roll recorders on moored buoys to detect and 
record the rate of rise and fall, and the direction of slope, of the sea-surface 
in response to waves (Figure 1.21). 
1.7.1 SATELLITE OBSERVATIONS OF WAVES 
The observation of ocean surface waves is particularly amenable to the use 
of satellite-based remote-sensing. Satellite remote-sensing techniques 
provide a unique elevated and synoptic (simultaneous) view of wide 
expanses of ocean, and offer the only practical method of obtaining 
repeated observations with the wide geographic coverage needed for 
reliable prediction. Four main techniques are considered here, but the 
technical details are not important in the context of this Volume. 
1 Radar altimetry 
A radar altimeter, mounted in a satellite, emits radar pulses at a rate of about 
1000 pulses per second directly towards the sea-surface, and each reflected 
pulse is picked up by a sensor. Radar pulses of the frequency used in 
satellites pass through (i.e. are not reflected by) water droplets (clouds) in 
the atmosphere, but are reflected by the sea-surface. (Shorter wavelengths 
characterize the radar used in weather forecasting which 'sees' clouds and 
precipitation.) The average time which the pulses take to travel to the sea- 
surface and back again enables the mean satellite-to-surface distance to be 
calculated. The accuracy with which the distance can be measured depends 
upon the sea state. For values of H1/3 up to 8 m, the accuracy is _+ 8 cm, and 
for values of H1/3 over 8 m, the accuracy is about _ x cm, where x is the 
significant wave height in metres. Changes in the shape and amplitude of 
the returning pulses can be used to give a measure of wave heights, from 
which the significant wave height (H1/3) can be calculated. The accuracy 
achieved is about _ 10% of HI/3 for waves of significant wave height 
greater than 3 m, and about +_ 0.3 m for smaller values of H1/3. 
4b 
2 Synthetic aperture radar (SAR) 
This technique maps variations in the proportion of the radar signal that is 
3ack-scattered to the radar antenna by the sea-surface, and gives a measure 
3f its 'roughness'. Short radar pulses are transmitted at an oblique angle to 
%e sea-surface, and variations in the Doppler shift (i.e. apparent changes in 
signal frequency caused by the relative movement between target and 
Jetector) of the scattered return signal are analysed to produce an image. 
SAR images often show a wave-like pattern (Figure 1.22), but this pattern is 
mt a direct indication of wavelength. The regular variations in reflectivity 
=an, however, be related to the characteristics of larger (swell) waves from 
which an idea of their wavelength and direction of propagation can be 
3btained. The precise interpretation of SAR images is hampered by such 
Jifficulties as: 
~i) SAR assumes a moving satellite and a stationary target, whereas both 
waves and water are moving. This motion complicates the return signal, so 
%at elaborate procedures have to be applied to render the image into an 
"nterpretable form. 
~ii) Image 'roughness' is determined by the entire spectrum of waves 
9resent, not just by the swell waves. Even capillary waves of a few 
nillimetres wavelength influence the image, and hence complicate its 
:nterpretation. 
~iii) White-capping tends to scatter incident radar randomly, thus obscuring 
_:he more regular back-scatter obtained from smoother surfaces. If waves 
actually break, the foam tends to absorb the radar signals, reducing both 
:larity and contrast in the final image. 
-igure 1.22 Swell-wave pattern around the island of Foula (70 km NW of Fair Isle, 
'E Atlantic) obtainedby 5~nthetic Aperture Radar (SAR). Area = 30km • 19 km. 
3 Scatterometry 
Radar scatterometers are used to analyse the strength and polarization of 
radar echoes, from which surface wind strength and direction can be 
determined. The method is complex and relies on thedifferent back- 
scattering properties of wind-generated surface waves when viewed 
obliquely in upwind, downwind and crosswind directions. (A related land- 
based technique is known as OSCR (Ocean Surface Current Radar), which 
exploits the fact that reflections of radio waves of suitable wavelength from 
surface waves produce specific interference patterns (analogous to Bragg 
reflections in crystallography). While originally devised as a way of 
measuring currents from the pattern of waves interacting with them, OSCR 
provides much useful information about the waves themselves.) 
4 Photography 
Changes in the amount of reflected sunlight correlate with local roughness 
and wave steepness, thus revealing wave patterns on photographs. Even 
internal waves can be detected by photography because of their effect on 
surface roughness (Section 1.2.1). The photographs in Figure 1.23 were 
taken from a manned spacecraft with a hand-held camera, and show the 
surface manifestations of some internal waves in the South China Sea and 
in the Mediterranean. 
Figure 1.23 (a) Internal waves in the South China Sea (Hainan Island visible beneath clouds 
on lower left). Four wave packets are visible. 
(b) Tidally generated internal waves propagating into the Mediterranean from the Straits of 
Gibraltar. The internal waves (which have amplitudes of the order of 15 m) are visible because 
of variations in the rouahness of the sea-surface (see p. 20). Area = 74 km x 74 kin. 
4/ 
1 Idealized waves of sinusoidal form have wavelength (length between 
successive crests), height (vertical difference between trough and crest), 
steepness (ratio of height to length), amplitude (half the wave height), 
9eriod (length of time between successive waves passing a fixed point) and 
~requency (reciprocal of period). Water waves show cyclical variations in 
water level (displacement), f rom-a (amplitude) in the trough to +a at the 
crest. Displacement varies not only in space (one wavelength between 
successive crests) but also in time (one period between crests at one 
ocation). Steeper waves depart from the simple sinusoidal model, and more 
closely resemble a trochoidal wave form. 
2 Waves transfer energy across/through material without significant 
9verall motion of the material itself, but individual particles are displaced 
~rom, and return to, equilibrium positions as each wave passes. Surface 
waves occur at interfaces between fluids, either because of relative 
novement between the fluids, or because the fluids are disturbed by an 
external force (e.g. wind). Waves occurring at interfaces between oceanic 
water layers are called internal waves. Wind-generated waves, once 
"nitiated, are maintained by surface tension and gravity, although only the 
atter is significant for water waves over 1.7 cm wavelength. 
3 Most sea-surface waves are wind-generated. The stronger the wind, the 
arger the wave, so variable winds produce a range of wave sizes. A 
constant wind speed produces a fully developed sea, with waves of H1/3 
~average height of highest 33% of the waves) characteristic of that wind 
speed. The Beaufort Scale relates sea state and H1/3 to the causative wind 
speed. 
4 Water particles in waves in deep water follow almost circular paths, but 
with a small net forward drift. Path diameters at the surface correspond to 
wave heights, but decrease exponentially with depth. In shallow water, the 
?rbits become flattened near thesea-bed. For waves in water deeper than 
1/2 wavelength, wave speed equals wavelength/period (c = L/T) and is 
9roportional to the square root of the wavelength (c = ~/gL / 2to); it is 
maffected by depth. For waves in water shallower than 1/20 wavelength, 
wave speed is proportional to the square root of the depth (c = ~fgd) and 
_!oes not depend upon the wavelength. For idealized water waves, the three 
zharacteristics, c, L arid T, are related by the equation c = L/T. In addition, 
each can be expressed in terms of each of the other two. For example, 
= 1.56T and L = 1.56T 2. 
5 Waves of different wavelengths become dispersed, because those with 
greater wavelengths and longer periods travel faster than smaller waVes. If 
:wo wave trains of similar wavelength and amplitude travel over the same 
sea area, they interact. Where they are in phase, displacement is doubled, 
~hereas where they are out of phase, displacement is zero. A single wave 
:rain results, travelling as a series of wave groups, each separated from 
adjacent groups by an almost wave,free region. Wave group speed in deep 
~ater is half the wave (phase) speed. In shallowing water, wave speed 
approaches group speed, until the two coincide at depths less than 1/20 of 
-he wavelength, where c = ~/gd. 
6 Wave energy is proportional to the square of the wave height, and 
travels at the group speed. Wave power is rate of supply of wave energy, 
and so it is wave energy multiplied by wave (or group) speed, i.e. it is wave 
energy propagated per second per unit length of wave crest (or wave speed 
multiplied by wave energy per unit area). Total wave power is conserved, so 
waves entering shallowing water and/or funnelled into a bay or estuary (see 
also 7 below) increase in height as their group speed falls. Wave energy has 
been successfully harnessed on a small scale, but large-scale utilization 
involves environmental and navigational problems, and huge capital outlay. 
7 Dissipation of wave energy (attenuation of waves) results from white- 
capping, friction between water molecules, air resistance, and non-linear 
wave-wave interaction (exchange of energy between waves of differing 
frequencies). Most attenuation takes place in and near the storm area. Swell 
waves are storm-generated waves that have travelled far from their place of 
origin, and are little affected by wind or by shorter, high-frequency waves. 
The wave energy associated with a given length of wave crest decreases 
with increasing distance from the storm, as the wave energy is spread over 
an ever-increasing length of wave front. 
8 Waves in shallow water may be refracted. Variations in depth cause 
variations in speed of different parts of the wave crest; the resulting 
refraction causes wave crests to become increasingly parallel with bottom 
contours. The energy of refracted waves is conserved, so converging waves 
tend to increase, and diverging waves to diminish, in height. Waves in 
shallow water dissipate energy by frictional interaction with the sea-bed, 
and by breaking. In general, the steeper the wave and the shallower the 
beach, the further offshore dissipation begins. Breakers form a continuous 
series from steep spilling types to long-period surging breakers. 
9 Waves propagating with a current have diminished heights, whereas a 
counter-current increases wave height, unless current speed exceeds half the 
wave group speed. If so, waves no longer propagate, but increase in height 
until they become unstable and break. Tsunamis are caused by earthquakes 
or by slumping of sediments, and their great wavelength means their speed 
is always governed by the ocean depth. Wave height is small in the open 
ocean, but can become destructively large near the shore. Seiches (standing 
waves) are oscillations of water bodies, such that at antinodes there are 
great variations of water level but little lateral water movement, whereas at 
nodes the converse is true. The period of oscillation is proportional to basin 
length and inversely proportional to the square root of the depth. A seiche is 
readily established when the wavelength of incoming waves is four times 
the length of the basin. 
10 Waves are measured by a variety of methods, e.g. pressure gauges on 
the sea-floor, accelerometers in buoys on the sea-surface, and via remote- 
sensing from satellites. 
4~ 
.~ow try the following questions to consolidateyour understanding of this 
~hapter.

Mais conteúdos dessa disciplina