Prévia do material em texto
REPÚBLICA DE MOÇAMBIQUE REPUBLIC OF MOZAMBIQUE MINISTÉRIO DOS RECURSOS MINERAIS MINISTRY OF MINERAL RESOURCES DIRECÇÃO NACIONAL DE GEOLOGIA NATIONAL DIRECTORATE OF GEOLOGY NOTÍCIA EXPLICATIVA / MAP EXPLANATION TOME / VOLUME 2 FOLHAS / SHEETS MECUMBURA (1631), CHIOCO (1632), TETE (1633), TAMBARA (1634), GURO (1732,1733), CHEMBA (1734), MANICA (1832), CATANDICA (1833), GORONGOSA (1834), ROTANDA (1932), CHIMOIO (1933) E / AND BEIRA (1934) Escala / Scale 1:250 000 GTK CONSORTIUM 2006 Volume 2 Page 2 REPÚBLICA DE MOÇAMBIQUE REPUBLIC OF MOZAMBIQUE MINISTÉRIO DOS RECURSOS MINERAIS MINISTRY OF MINERAL RESOURCES DIRECÇÃO NACIONAL DE GEOLOGIA NATIONAL DIRECTORATE OF GEOLOGY NOTÍCIA EXPLICATIVA / MAP EXPLANATION TOME / VOLUME 2 FOLHAS / SHEETS MECUMBURA (1631), CHIOCO (1632), TETE (1633), TAMBARA (1634), GURO (1732,1733), CHEMBA (1734), MANICA (1832), CATANDICA (1833), GORONGOSA (1834), ROTANDA (1932), CHIMOIO (1933) E / AND BEIRA (1934) Escala / Scale 1:250 000 GTK CONSORTIUM 2006 MINERAL RESOURCES MANAGEMENT CAPACITY BUILDING PROJECT Volume 2 Page 3 © National Directorate of Geology, Republic of Mozambique Date: 31.12.2006 Electronically available on CD-ROM from: In Mozambique: In South Africa The Director The Director National Directorate of Geology (DNG) Council for Geoscience (CGS) Praça 25 de Junho, 380, 4th floor 280 Pretoria Str. Silverton, Pretoria PO BOX 217 Private Bag X112 Maputo, Mozambique Pretoria, 0001, South Africa Tel: +258 (21) 312082/3 +27 (012) 8411018 +258 823128670 Fax: +258 (21) 429216 +27 (012) 8411221 e-mail: e-mail: edaudi@teledata.mz, edaudi@tvcabo.co.mz rprice@geoscience.org.za Price available on request The National Directorate of Geology (DNG), Ministry of Mineral Resources, Republic of Mozambique, in collaboration with a consortium headed by the Geological Survey of Finland (GTK), and with funding from the Nordic Development Fund (NDF Credit 335), produced this Map Explanation, within the terms of the Mineral Resource Management Capacity Building Project, (MRMP); contract 02/QCBS/B22./ MIREME-UCPM/2002. Volume 2 Page 4 The GTK Consortium’s field team comprised following geologists: • Yrjö Pekkala (GTK – Project Director, Mineral Resources IM) • Tapio Lehto (GTK – Deputy Project Director, Mineral Resources) • A.B. Phil Westerhof (ITC – Project Advisor) • Matti Lehtonen (GTK – Field Team Leader) • Tuomo Manninen (GTK – Mapping Expert) • Hannu Mäkitie (GTK –Mapping Expert) • Tapio Koistinen (GTK – Mapping Expert, Structural Geology) • Esko Korkiakoski (GTK – Mapping Expert, Mineral Resources) • Saku Vuori (GTK – Mapping Expert) • Tapio Kuivasaari (GTK – Industrial minerals) • Toni Eerola (GTK – Mapping Expert) • André Tahon (ITC – Mapping Expert) • Robbert Rutten (ITC – Mapping Expert, Sedimentology) • Bosse Gustafsson (SGU – Mapping Expert) • Christer Åkerman (SGU – Mapping Expert) • João M. Marques (Gondwana, Lda – Mapping Expert) • Reinaldo Gonçalves Jr. (Gondwana, Lda – Mineral Resources Expert) • Maurizio Ferrara (Gondwana, Lda – Mapping Expert) • Mário Deus (Gondwana, Lda – Mineral Resources Expert, Logistics) DNG field geologists and technicians: • Grácio Cune, geologist, DNG Maputo • Olavo Deniasse, geologist, DNG Manic • Sérgio Fernando, geologist, DNG Maputo • Rogério Matola, geologist, DNG Maputo • Hilário Mavie, geologist, DNG Maputo • Inácio Saranga, geologist, DNG Maputo • Celestino de Sousa, geologist, DNG Manica • Gustodio Cornélio, technician, DNG Maputo • Ernesto Correia, technician, DNG Tete • Abdul Faquir, technician, DNG Maputo • Victorino Joaquim, technician, DNG Maputo • Jose Nampulula, technician, DNG Tete • Viriato Nhampula, technician, DNG Maputo • Luis Saunda, technician, DNG Tete • Ussene Vasco Ussene, technician, DNG Sofala The Remote Sensing/GIS team comprised: • Olli Rantala (GTK – Head GIS Department) • Antti Kahra (GTK – GIS Expert) • Markku Tiainen (GTK – GIS Expert) • Ernst Schetselaar (ITC – GIS/RS Expert) • Tsehaie Woldai (ITC – RS Expert) The Airborne Geophysics team comprised: • Colin V. Reeves (ITC – Interpretation Expert) • Sally Barritt (ITC – Processing Expert) • Hilkka Arkimaa (GTK – Interpretation Expert) • Tapio Ruotoistenmäki (GTK – Interpretation and Processing Expert) Volume 2 Page 5 Written contributions to the present Map Explanation have been made by: • A.B. Phil Westerhof (ITC/Westcourt GeoConsult – Principal Author) • Yrjö Pekkala (GTK) • Tapio J. Koistinen (GTK) • Matti Lehtonen (GTK) • Tapio Lehto (GTK – Mineral resources) • Tuomo Manninen (GTK) • Hannu Mäkitie (GTK) • Saku Vuori (GTK) • Toni Eerola (GTK) • João M. Marques (Gondwana, Lda) • Maurizio Ferrara (Gondwana, Lda) • Irmeli Mänttäri (GTK – Geochronologist) • André Tahon (ITC – Expert African Geology) Databases: • Olli Rantala (GTK – Designing, planning) • Antti Kahra (GKT – Planning, cordination) • Markku Tiainen (GTK – Data management) • Jari Väätäinen (GTK – Photos) • Petri Rosenberg (GTK – Observation data) • Tapio Lehto (GTK – Mineral data) • Esko Korkiakoski (GTK – Mineral data) The processing of data and maps has been carried out by: • Olli Rantala (GTK – Manager, databases and airphotos, photo data base) • Antti Kahra (GKT – Data management) • Hilkka Saastamoinen (GTK – Map digitations and data management) • Eira Kuosmanen (GTK – GIS geologist, map production, satellite images) • Anneli Lindh (GTK – Map production, data management) • Hanna Virkki (GTK – GIS gelogist, map production) • Merja Janhila (GTK – GIS geologist, map production) • Riikka Koskinen (GTK – GIS geologist, map production) • Mirjami Ajlani (GTK – Map production) • Helena Saarinen (GTK – Map production) • Marita Ranta-Pantti (GTK – Input of data) Topographic base data: • Antti Kahra (GTK – GIS geologist) • Markku Tiainen (GTK – GIS geologist) • Ernst Schetselaar (ITC – GIS geologist) For future reference: GTK Consortium (2006a). Map Explanation; Volume 2: Sheets 1630 – 1934. Geology of Degree Sheets Mecumbura, Chioco, Tete, Tambara, Guro, Chemba, Manica, Catandica, Gorongosa, Rotanda, Chimoio and Beira, Mozambique. Ministério dos Recursos Minerais, Direcção Nacional de Geologia, Maputo. Volume 2 Page 6 FOREWORD The present Map Explanation (Volume 2) and related Geological Maps and Database have been produced by a consortium composed of the Geological Survey of Finland (GTK, leading partner), the International Institute for Geo-Information and Earth Observation (the Netherlands), the Geological Survey of Sweden (SGU), the Geological Survey of Denmark and Greenland (GEUS) and Gondwana, Lda. (Mozambique) as part of the Geo Infrastructure Development Project (GIDP), a sub-project of the larger Mineral Resources Management Capacity Building Project (MRMP). This consortium will be further referred to as ‘GTK Consortium’. The above project and sub-project have been implemented under the National Directorate of Geology (DNG), Ministry of Mineral Resources, and Republic of Mozambique. The major task of the GIDP has been to re-map, upgrade and improve existing geological maps in order to create a comprehensive and uniform coverage of geological maps at scale 1:250 000 and a partial coverage of detailed maps (scale 1:50 000) of selected areas of high mineral potential. The GTK Consortium undertook this task in LOT 2 (and Extension) and LOT 3 (and Extension) as shown in Fig 1. A consortium comprising Norconsult and the Geological Surveys of Norway and Great Britain (NGU and BGS) has co-implemented a contract for LOT 1 (and Extensions; see Fig. 1). These projects were financed from a special loan from the Nordic Development Fund (NDF). The remainder (Area D) of Mozambique territory has been re-mapped by the South African Council for Geo-science (CGS) under a separatebilateral contract. Fig. 1. Configuration of areas re- mapped by the DNG in collaboration with various international consortia. The present Map Explanation Volume 2 is a part of a series of Map Explanations covering the territory of Mozambique as shown in Fig. 2. It is bounded by 16° South, 34° East and the international border with Zimbabwe and contains the following Square Degree Sheets Volume 2 Page 7 (SDS): 1631/1632, 1633, 1634, 1732/1733, 1734, 1832/1833, 1834, 1932/1933 and 19341. Each Map Explanation emphasises certain aspects of the geology of Mozambique. This Map Explanation stresses the geodynamic development and mineral potential of the northern and eastern margins of the Zimbabwe Craton and surrounding Proterozoic Fold Belts and the coal potential of the Karoo Basins near Moatize. All locations (e.g. in captions) are in UTM coordinates. Please note that in the area covered by LOT 2 reference is made to the 36 K zone. Fig. 2. Map Explanation Volume numbers in LOT 2 (+ Extension) and LOT 3 (+ Extension). 1 A degree sheet (1° x 1° or ~ 110 x 110 km) is numbered after the coordinates of the upper right corner. For example, S DS 1834 is located south of 18° south and west of 34° east. SDS=Square Degree Sheet or DS=Degree Sheet. Volume 2 Page 8 TABLE OF CONTENTS FOREWORD ....................................................................................................... 6 TABLE OF CONTENTS.................................................................................... 8 ABSTRACT ....................................................................................................... 17 RESUMO ........................................................................................................... 20 LIST OF TABLES ............................................................................................ 48 LIST OF FIGURES .......................................................................................... 48 CHAPTER 1 ...................................................................................................... 61 INTRODUCTION............................................................................................. 61 1.1. BACKGROUND OF THE PROJECT..................................................... 61 1.2. HISTORY AND SYNTHESIS OF PREVIOUS WORK........................ 61 CHAPTER 2 ...................................................................................................... 64 METHODOLOGIES AND PROCEDURES.................................................. 64 2.1. INTRODUCTION...................................................................................... 64 2.2. EXISTING DATA ...................................................................................... 66 2.3. COMPILATION AND SYNTHESIS ....................................................... 66 2.3.1. Digitising and Compilation of Existing Geological Maps......................................... 66 2.3.2. Satellite Imagery........................................................................................................... 67 2.3.3. Airborne Geophysics.................................................................................................... 69 2.3.4. Digital Enhancement of Landsat 7 TM Scenes.......................................................... 72 2.3.5. Geological Interpretation of Landsat TM Scenes ..................................................... 73 2.3.6. Integrated Enhancement of Radiometric and Landsat TM Scenes ........................ 74 2.3.7. Digital Interactive Interpretation of Compiled and Processed Data Sets............... 75 2.4. FIELD VERIFICATION AND MAPPING............................................. 77 2.5. LABORATORY WORK ........................................................................... 77 2.5.1. Petrography .................................................................................................................. 78 2.5.2. Geochronology.............................................................................................................. 78 2.5.3. Lithogeochemistry........................................................................................................ 81 2.5.4. C-isotope Analyses........................................................................................................ 82 2.6. MAP PRODUCTS...................................................................................... 82 2.6.1. Base Maps ..................................................................................................................... 82 Datum Transformation ........................................................................................................... 82 Manual Digitising.................................................................................................................... 83 SRTM Digital Elevation Data................................................................................................. 83 2.6.2. Geological Maps ........................................................................................................... 84 2.6.3. Map Explanations ........................................................................................................ 86 2.7. MINERAL INFORMATION SYSTEM (MIS)....................................... 87 Volume 2 Page 9 CHAPTER 3 ...................................................................................................... 90 INFRASTRUCTURE........................................................................................ 90 CHAPTER 4 ...................................................................................................... 92 PHYSIOGRAPHY AND GEOMORPHOLOGY .......................................... 92 4.1. GEOMORPHOLOGY............................................................................... 92 4.2. BASEMENT TECTONICS....................................................................... 93 4.3. CLIMATE................................................................................................... 94 CHAPTER 5 ...................................................................................................... 96 LITHOSTRATIGRAPHY................................................................................ 96 5.1. PRINCIPLES.............................................................................................. 96 5.2. HISTORIC DEVELOPMENT ................................................................. 97 5.3. REGIONAL GEOLOGY .......................................................................... 97 5.3.1. Archaean cratons and mobile belts............................................................................. 98 Granulite-gneiss belts............................................................................................................ 100 Granite-greenstone terrains .................................................................................................. 100 ‘Younger Granites’................................................................................................................ 101 Late-Archaean basins, dykes and layered intrusions........................................................... 101 5.3.2. Palaeoproterozoic fold belts ...................................................................................... 101 5.3.3. Mesoproterozoic fold belts......................................................................................... 102 5.3.4. Neoproterozoic Pan-African fold belts..................................................................... 103 5.3.5. Cambrian platform sedimentary rocks.................................................................... 105 5.3.6. Carboniferous platform sedimentary rocks ............................................................ 106 5.3.7. Sedimentaryand volcanic rocks of the Karoo......................................................... 107 5.3.8. Recent sedimentary and volcanic rocks of the East African Rift System............. 109 5.4. GEODYNAMIC PRINCIPLES.............................................................. 111 5.4.1. Wilson or Supercontinent Cycles.............................................................................. 111 5.4.2. Superplumes ............................................................................................................... 114 5.5. GEOCHRONOLOGY, WITH EMPHASIS ON NEW DATA............ 114 5.5.1. Phanerozoic Cover ..................................................................................................... 114 5.5.2. Crystalline Basement ................................................................................................. 115 5.6. TERRANES IN MOZAMBIQUE .......................................................... 116 CHAPTER 6 .................................................................................................... 118 SOUTH GONDWANA BASEMENT – KALAHARI CRATON ............... 118 6.1. INTRODUCTION.................................................................................... 118 Volume 2 Page 10 6.1.1. Migmatic gneiss terrane............................................................................................. 119 6.1.2. Granite-Greenstone Terrane..................................................................................... 120 Mutare-Manica greenstone belt............................................................................................ 120 Cronley-Munhinga greenstone belt ...................................................................................... 121 Granitoids .............................................................................................................................. 122 6.1.3. Archaean Rocks in Mozambique .............................................................................. 122 6.2. MUDZI METAMORPHIC COMPLEX (A3M) ................................... 123 6.2.1. Introduction ................................................................................................................ 123 6.2.2. Lithology ..................................................................................................................... 124 Quartz monzonite and quartz monzodiorite (A3Mqm)......................................................... 125 Foliated granite (A3Mgr)....................................................................................................... 125 TTG gneiss and foliated granitoids (A3Mgn) ....................................................................... 126 Granodioritic gneiss (A3Mgd) ............................................................................................... 126 Metagabbro (A3Mgb) and garnet amphibolite (A3Mam)..................................................... 127 Garnet gneiss (A3Mgg).......................................................................................................... 127 6.2.3. Geochemistry .............................................................................................................. 128 6.2.4. Age ............................................................................................................................... 128 6.3. MAVONDE COMPLEX ......................................................................... 129 6.3.1. Introduction ................................................................................................................ 129 6.3.2. Older granitoids.......................................................................................................... 130 Tonalitic gneiss (A2gt) ........................................................................................................... 130 Paragneiss with quartzitic intercalations (A3Mpgn)............................................................ 130 6.3.3. Manica Group............................................................................................................. 130 Introduction ........................................................................................................................... 130 Macequece Formation* ........................................................................................................ 131 Talc-chlorite schist, talc schist, chlorite-amphibole schist (A3MMtc)................................ 131 Serpentinite and serpentine-rich metavolcanic rock (A3MMse) ......................................... 132 Quartz-sericite schist (A3MMqss) ......................................................................................... 134 Metachert (A3MMch) and Banded ironstone (A3MMfe)..................................................... 134 Lithic breccia (A3MMbr) and diamictite (A3MMdi) ............................................................ 135 Metabasalt and mafic schist (A3MMba) .............................................................................. 136 Felsic crystal tuff (A3MMff) and quartz-feldspar porphyry (A3MMqp).............................. 137 Volcanic conglomerate (A3MMvc) ....................................................................................... 139 Intermediate metavolcanic rock (A3MMiv) and tuff breccia (A3MMtb)............................. 140 Felsic metavolcanic rock (A3MMfv) and volcanic breccia (A3MMvb) ............................... 141 Geochemistry ......................................................................................................................... 141 6.3.4. Vengo Formation* (A3MV) ....................................................................................... 143 Volcanic conglomerate (A3MVco) and polymict conglomerate (A3MVclo)........................ 144 Metagreywacke (A3MVgy), Quartzite (A3MVqz), Arkosic quartzite (A3MVar), Mica schist with aluminous and quartzitic layers (A3MVmc)................................................................. 145 Phyllite, graphite schist (A3MVps), Iron-rich lithic metasandstone/quartzite (A3MVss), Marble (A3MVma)................................................................................................................. 147 Volume 2 Page 11 6.3.5. Munhinga Group (A3MH)......................................................................................... 149 Ultramafic metavolcanic rock and talc-chlorite schist/BIF (A3MHuv).............................. 149 Quartzite (A3MHqz)............................................................................................................... 150 6.3.6. Neoarchaean granitoids and mafic plutonic rocks.................................................. 150 Porphyritic granite and granodiorite (A3Vpgd) ................................................................... 150 Massive granite (A3Vmgr)..................................................................................................... 151 Foliated granite, porphyritic in places (A3Vpg) ................................................................... 152 TTG- gneiss (A3Vgn) and banded TTG gneiss (A3Vbgn) .................................................... 152 Migmatite (A3Vmig) .............................................................................................................. 153 Metagabbro (A3Vgb).............................................................................................................. 153 Quartz dyke (A3Vqd), pegmatite (A3Vpm), aplite granite (A3Vagr) and granite (A3Vgr)... 154 Medium-grained foliated tonalite and granodiorite (A3Vto) ............................................... 154 Mafic to intermediate orthogneiss (A3Vogn)........................................................................ 154 6.3.7. Geochemistry .............................................................................................................. 155 6.3.8.Age ............................................................................................................................... 156 6.4. PALAEOPROTEROZOIC MAGMATISM ......................................... 158 6.5. UMKONDO GROUP............................................................................... 159 6.5.1. Introduction ................................................................................................................ 159 6.5.2. Dacata Formation* (P2UD) ....................................................................................... 159 6.5.3. Age ............................................................................................................................... 160 6.6. UMKONDO IGNEOUS PROVINCE .................................................... 161 6.6.1. Introduction ................................................................................................................ 161 6.6.2. Lithology ..................................................................................................................... 161 Mashonaland ‘post-Umkondo’ dolerite and gabbro (P2ML) ............................................. 161 Metadolerite (P3db)................................................................................................................ 162 6.6.3. Geochemistry .............................................................................................................. 163 6.6.4. Age ............................................................................................................................... 164 CHAPTER 7 .................................................................................................... 165 SOUTH GONDWANA BASEMENT – PROTEROZOIC FOLD BELTS165 7.1. INTRODUCTION.................................................................................... 165 7.2. MAVURADONHA METAMORPHIC SUITE (P3MV)....................... 167 7.2.1. Introduction ................................................................................................................ 167 7.2.2. Lithology ..................................................................................................................... 167 Nyamasoto Biotite Gneiss Formation*................................................................................. 167 Kapfrugwa Carbonatite......................................................................................................... 167 Gungwa Metagabbro............................................................................................................. 168 Mavuradonha Metamorphic Complex in Mozambique (P3MV) ......................................... 168 7.2.3. Geochemistry .............................................................................................................. 168 7.2.4. Age ............................................................................................................................... 168 7.3. MASOSO METAMORPHIC SUITE (P3MO) ...................................... 169 Volume 2 Page 12 7.3.1. Introduction ................................................................................................................ 169 7.3.2. Lithology ..................................................................................................................... 170 Leucomigmatite ..................................................................................................................... 170 Striped mafic gneiss............................................................................................................... 171 7.3.3. Metamorphism ........................................................................................................... 175 7.3.4. Age ............................................................................................................................... 176 7.4. RUSHINGA GROUP (P1R)..................................................................... 177 7.4.1. Introduction ................................................................................................................ 177 7.4.2. Rushinga Lithologies in Zimbabwe .......................................................................... 177 7.4.3. Rushinga Lithologies in Mozambique ...................................................................... 178 7.4.4. Rio Embuca Formation* ........................................................................................... 179 Lower quartzite (P1REqz)...................................................................................................... 179 Meta-arkose / Arkosic quartzite (P1REa) ............................................................................ 181 Biotite-garnet-sillimanite schist (P1REch) ........................................................................... 182 Mineralogy............................................................................................................................. 182 7.4.5. Monte Pitão Formation*............................................................................................ 184 Banded amphibolite (P1RPa) ................................................................................................ 184 Calc-silicate gneiss (P1RPcc) ................................................................................................ 186 Lower marble (P1RPml) ....................................................................................................... 187 Biotite gneiss (P1RPgn) ......................................................................................................... 188 Upper marble (P1RPma) ....................................................................................................... 188 Upper quartzite (P1RPq)........................................................................................................ 188 7.4.6. Metamorphism ........................................................................................................... 190 7.4.7. Age ............................................................................................................................... 191 7.4.8. Origin........................................................................................................................... 193 Mukota meta-anorthosite (P2MHan).................................................................................... 193 7.5. BASAL RUSHINGA INTRUSIVE SUITE (P3GR) ............................. 194 7.5.1. Introduction ................................................................................................................ 194 7.5.2. Lithology ..................................................................................................................... 194 7.5.3. Geochemistry .............................................................................................................. 194 7.5.4. Age ............................................................................................................................... 195 7.6. GAIREZI GROUP (P1Z) ......................................................................... 196 7.6.1. Introduction ................................................................................................................ 196 7.6.2. Lithologies ................................................................................................................... 197 Quartzite and polymictic conglomerate (P1Zq, P1Zc) .......................................................... 197 Marble (P1Zmb)..................................................................................................................... 198 Saccharoidal quartzite and orthoquartzite (P1Zqs).............................................................. 198 Muscovite-biotite schist (P1Zss) ............................................................................................ 198 7.6.3.Metamorphism ........................................................................................................... 200 7.6.4. Mineralogy .................................................................................................................. 201 7.6.5. Age ............................................................................................................................... 202 7.7. PALAEO/MESOPROTEROZOIC ROCKS EAST OF THE RUSHINGA GROUP.............................................................................. 203 Volume 2 Page 13 7.7.1. Introduction ................................................................................................................ 203 7.7.2. Lithology ..................................................................................................................... 204 Nhamessolo Formation*....................................................................................................... 204 Garnetiferous quartzite (P1RNq) .......................................................................................... 204 Calc-silicate gneiss (P1RNc) ................................................................................................. 205 Marble (P1RNm )................................................................................................................... 205 Chíduè Formation ................................................................................................................. 206 Mungári garnet granite-migmatite (P2MG) ......................................................................... 207 Garnet (biotite) gneiss (P1ppg).............................................................................................. 208 Chacocoma porphyritic biotite granite (P2Cgr) ................................................................... 208 7.8. BÁRUÈ COMPLEX ................................................................................ 211 7.8.1. Introduction ........................................................................................................... 211 7.8.2. Lithology ..................................................................................................................... 212 Chimoio Group (P2BC) ......................................................................................................... 212 Macossa Group(P2BM) ......................................................................................................... 218 Calc-silicate gneiss (P2BMcc) ............................................................................................... 223 7.8.3. Intrusive rocks ............................................................................................................ 224 Hornblendite (P2BUhb)......................................................................................................... 224 Pyroxene diorite (P2BUpd).................................................................................................... 224 Gabbro and gabbroic rock (P2GUgb) ................................................................................... 224 Monte Hombe tonalite and granodiorite (P2BMdg) ............................................................ 225 Amphibole-bearing granitic gneiss (P2BUgg)...................................................................... 226 Foz do Rio Banhale quartz diorite (P2BUdi)........................................................................ 227 Monte Tomonda leucocratic gneiss (P2BUlg)...................................................................... 227 Inchope orthogneiss (P2BUig) ............................................................................................. 229 Monte Panda granodiorite (P2Ugd)...................................................................................... 229 Monte Senge granite (P2Ugr)................................................................................................ 229 Lithogeochemistry ................................................................................................................. 230 Age ......................................................................................................................................... 231 7.9. GURO SUITE........................................................................................... 232 7.9.1. Introduction ............................................................................................................... 232 7.9.2 Lithology ...................................................................................................................... 233 Serra Banguatere aplitic granite gneiss-migmatite (P3Oag) .............................................. 233 Magasso metagabbro and mafic gneiss-migmatite (P3Ogb)................................................ 235 Monte Calinga Muci granite gneiss-migmatite and mafic gneiss-migmatite (P3Ogm)...... 236 7.9.3. Lithogeochemistry..................................................................................................... 237 7.9.4. Age ............................................................................................................................... 239 7.10. PAN-AFRICAN GRANITES................................................................ 240 Monte Cáverie granite and pegmatite (P3CV)..................................................................... 240 CHAPTER 8 .................................................................................................... 242 WEST GONDWANA BASEMENT – TÊTE SUITE .................................. 242 8.1. INTRODUCTION.................................................................................... 242 8.2. TETE GABBRO-ANORTHOSITE INTRUSIVE SUITE ................... 242 Volume 2 Page 14 8.2.1. Introduction ................................................................................................................ 242 8.2.2. Lithology ..................................................................................................................... 243 Pyroxenite (P2Tpx) ................................................................................................................ 244 Anorthosite (P2Tan) .............................................................................................................. 244 Fe-Ti-oxide rocks .................................................................................................................. 245 8.2.3. Origin........................................................................................................................... 245 CHAPTER 9 .................................................................................................... 246 PHANEROZOIC COVER ............................................................................. 246 9.1. KAROO SUPERGROUP ........................................................................ 246 9.1.1. Introduction ................................................................................................................ 246 9.1.2. Lower Karoo Group................................................................................................... 247 Vúzi Formation* (CbV)......................................................................................................... 247 Moatize Formation*(PeM).................................................................................................... 247 Matinde Formation* (PeT, PeTc)......................................................................................... 248 9.1.3. Upper Karoo Group................................................................................................... 250 Cádzi Formation* (PeC) ....................................................................................................... 250 Rio Nhavúdezi Formation* (JrRN) ......................................................................................252 Serra Bombuè Formation* (JrSb)........................................................................................ 254 Rio Mazoe Formation* (JrIa and JrIb) ............................................................................... 255 Bangomatete Formation* (JrBr, JrBb)................................................................................ 258 Chueza Formation* (JrC)..................................................................................................... 263 9.1.4. Geochemistry .............................................................................................................. 266 9.2. RUKORE SUITE ..................................................................................... 266 9.2.1. Introduction ................................................................................................................ 266 9.2.2. Lithology ..................................................................................................................... 266 Felsic intrusives (JrR, JrRg, JrRf) ....................................................................................... 268 Mafic intrusives (JrRmd) ...................................................................................................... 270 9.2.3. Age ............................................................................................................................... 270 9.3. GORONGOSA INTRUSIVE SUITE ..................................................... 271 9.3.1. Introduction ................................................................................................................ 271 9.3.2. Lithology ..................................................................................................................... 271 Gabbro (JrGb) ....................................................................................................................... 272 Granite (JrGg) ....................................................................................................................... 272 9.3.3. Age ............................................................................................................................... 273 Gorongosa fault/fracture corridor and dyke swarm ............................................................ 273 9.4. EAST AFRICA RIFT SEQUENCES..................................................... 273 9.4.1. Introduction ................................................................................................................ 273 9.4.2. Lupata Group ............................................................................................................. 274 Introduction ........................................................................................................................... 274 Tchazica Formation* (JrLT) ................................................................................................ 275 Monte Palamuli Formation* (JrLP) .................................................................................... 276 Monte Mazambulo Formation* (JrLM)............................................................................... 278 Monte Linhanga Formation* ............................................................................................... 278 Alkaline lavas (CrLM)........................................................................................................... 279 Volume 2 Page 15 Agglomerates (CrLMa) ......................................................................................................... 279 Sandstone and tuffitic sandstone (CrLMs)........................................................................... 279 9.4.3. Geochemistry .............................................................................................................. 280 9.4.4. Age ............................................................................................................................... 280 9.4.5. Cretaceous terrestrial sediments............................................................................... 282 Sena Formation* (CrS)......................................................................................................... 282 Grudja Formation* (CrG)..................................................................................................... 283 Mágoè Formation* (CrM) .................................................................................................... 283 Conglomerate (CrMc) ........................................................................................................... 284 Sandstone and conglomerate (CrMs) ................................................................................... 284 Limestone and sandstone (CrMl).......................................................................................... 285 9.4.6. Carbonatites and associated alkaline rocks ............................................................. 286 Monte Xiluvo carbonatite Suite (CrX).................................................................................. 286 Carbonatites emplaced along the mylonite floor of the Tete Suite; Rio Mufa (Crcb)........ 288 9.4.7. Tertiary terrestrial sediments ................................................................................... 289 Cheringoma Formation* (TeC)............................................................................................ 289 Inhaminga Formation* (TeI) ............................................................................................... 290 Mazamba Formation* (TeZ)................................................................................................. 290 Quartz breccia veins .............................................................................................................. 290 9.4.8. Quaternary.................................................................................................................. 291 Eluvial floodplain clayey sand (Qps).................................................................................... 291 Eluvial floodplain mud (Qpi) ................................................................................................ 291 Fluvial terrace sand (Qt)....................................................................................................... 292 Colluvium (Qc) ...................................................................................................................... 292 Pebble debris (Mantos de cascalheira) (Qp) ........................................................................ 293 Coastal dune sand (Qd)......................................................................................................... 293 Alluvium (Qa) ........................................................................................................................ 293 CHAPTER 10 .................................................................................................. 295 STRUCTURE AND METAMORPHISM .................................................... 295 10.1. INTRODUCTION.................................................................................. 295 10.2. ZIMBABWE CRATON......................................................................... 295 10.3. NORTHERN MARGIN OF THE ZIMBABWE CRATON .............. 295 10.4. EASTERN MARGIN OF THE ZIMBABWE CRATON .................. 296 10.2. STRUCTURES AND CONTACT RELATIONSHIPS OF THE TETE SUITE....................................................................................................... 304 10.3. METAMORPHIC CONDITIONS DURING PROTEROZOIC TIMES ...................................................................................................... 305 CHAPTER 11 .................................................................................................. 309 GEODYNAMIC EVOLUTION.....................................................................309 11.1. INTRODUCTION.................................................................................. 309 11.2. TERRANE BOUNDARIES................................................................... 309 Volume 2 Page 16 11.3. GEODYNAMIC EVOLUTION............................................................ 313 11.3.1. Archaean geodynamic evolution of the Zimbabwe craton ................................... 314 11.3.2. Palaeoproterozoic extension of the Zimbabwe craton .......................................... 316 11.3.3. Palaeoproterozoic orogeny ...................................................................................... 317 11.3.4. Mesoproterozoic Pre-Kibaran extension ............................................................... 317 11.3.5. Mesoproterozoic Grenville Orogenic Cycle – Rodinia Supercontinent .............. 317 11.3.6. Post-Rodinia break-up (Neoproterozoic) ............................................................... 320 11.3.7. Pan-African Orogenic System (Neoproterozoic – Ordovicium) .......................... 322 CHAPTER 12 .................................................................................................. 325 MINERAL RESOURCES .............................................................................. 325 12.1. INTRODUCTION.................................................................................. 325 12.2. MINERAL DEPOSITS AND OCCURRENCES................................ 326 12.2.1. Metallic Minerals...................................................................................................... 326 Gold........................................................................................................................................ 326 Copper.................................................................................................................................... 331 Tin .......................................................................................................................................... 332 Iron......................................................................................................................................... 332 12.2.2. Industrial Minerals .................................................................................................. 334 Construction materials .......................................................................................................... 334 Clay ........................................................................................................................................ 337 Bauxite ................................................................................................................................... 338 Alumen................................................................................................................................... 338 Dimension stone .................................................................................................................... 339 Crystalline limestone (marble).............................................................................................. 340 Apatite, fluorite...................................................................................................................... 340 Mineral and thermal water ................................................................................................... 344 12.2.3. Energy Minerals ....................................................................................................... 344 Coal ........................................................................................................................................ 344 12.3. MINERAL POTENTIAL...................................................................... 346 12.4. RECOMMENDATIONS FOR EXPLORATION .............................. 348 REFERENCES ................................................................................................ 350 Appendix 1. Definitions of lithostratigraphic units Appendix 2. Age Results, Mozambique Mapping Project/LOT2: Map Explanation, Vol. 2 Appendix 3. Whole rock analyses Appendix 4. Microprobe analyses Volume 2 Page 17 ABSTRACT Volume 2 is one of the four Map Explanations describing the results of the geological mapping project in northwestern, central and southern Mozambique, covering 430 000 km2. The project was carried out in the years 2002 – 2006, managed by the GTK Consortium (Geological Survey of Finland as leading partner), for the client Ministry of Mineral Resources, Maputo, Mozambique (through Direcção Nacional de Geologia). Based on all available geological map data combined with interpretation of airborne geophysics and satellite data a seamless geological map with one common lithostratigraphy was created for the whole area. The new geology is presented in 38 map sheets in scale 1:250 000. From three separate ore potential areas there are 20 detailed map sheets in scale 1:50 000. The known mineral indications and occurrences (about 500 for the whole area) are collected in a database and shown on the mineral resources maps. Geologica observations were made on 18 100 outcrops. Lithogeochemistry was done on 350 samples, 900 thin sections studied and 36 samples were dated using zircon U-Pb or Sm-Nd method. Microprobe analysis of minerals and petrophysical measurements from rock samples were also made. The collected data, e.g. observations on outcrops, photos, geochemical analyses are spatially georeferenced and in digital form. The geological description follows in chronological order from old to young, from Precambrian through Phanerozoic up to Recent. In the structure of the Map Explanation, the applied major division of the Precambrian conforms to the current international concept of palaeogeographic reconstruction model involving the amalgamation of three continental units called West, East and South Gondwana terranes. Where applicable, the major terrane division is subdivided under separate Chapters. In the Precambrian area covered by this Volume, only the South Gondwana is represented in its original sense. Complication at the boundary occurred e.g. when parts of the Tete Gabbro-Anorthosite Suite, thought to originate within the West Gondwana block, tectonically glided over to the South Gondwana side. The margin of the Archaean Zimbabwe craton partly extends to the Mozambican side of the border, notably in the Manica region, where U-Pb age of ca. 2.9 Ga was determined for TTG gneisses. It also extends further north, where its extent was updated by mapping, partly with the support of zircon datings. A preliminary interpretation of the extensively allochthonous tectonic structure involving the basement and cover at the craton margin north of Manica is given, not addressed in previous reports. The overprinting tectonism and metamorphism affected the craton margin also up to 20 km east of Manica and even further east, while the Manica area remained intact. Low-grade metamorphic metasediments and metavolcanic rocks of the Umkondo Group south of Manica rest on the Archaean basement and are described as a part of the domain. The craton margin is flanked by a N-S oriented, rather narrow zone of Palaeo- proterozoic shallow marine rocks of the Rushinga and Gairezi Groups, metamorphosed and deformed in amphibolite facies conditions. This domain abruptly ends in the east against the sheared boundary of the Mesoproterozoic Báruè Complex. The rocks of the Complex comprise a variety of supracrustal and mostly felsic plutonic rocks, largely with gneissic and migmatitic aspect. It is supposed that the Complex originated elsewhere and moved to its Volume 2 Page 18 present position along a sinistral transcurrent fault along the partly buried eastern margin of the Zimbabwe craton. 200 – 300 km north of Manica the craton margin region is characterized by highly layer-parallel deformed felsic-maficintrusive association of the Neoproterozoic Guro Suite, covering a large area but with rather flat attitude implying not a great thickness. Many characteristics, including the age of the ca. 850 Ma obtained for the Suite, which has not been distinguished earlier as an independent unit, correspond to those of the Basal Rushinga Intrusive Complex (BRIC) as it is called in studies accomplished in the Zimbabwean side of the border. In the area assigned to the Guro Suite, extending from south of Tete town until the Guro village in the south, there are several types of supracrustal and plutonic intercalates, Mesoproterozoic or even older. The Phanerozoic sediments and volcanic rocks in the area of this Volume fill rifted troughs in two different directions. One is the E-W trending Mid-Zambezi trough, running through the Tete region, and the other branches from there to SW, extending to the coast at Beira, outside the Map Explanation area. The boundaries of the troughs are commonly distinctive topographic features, normal faults, where the Precambrian side rises to a higher average level. Along the boundary fault a spectacular fault gouge has regularly developed, often brecciated and invaded by quartz at low pressure and low temperature. The Phanerozoic rocks generally comprise sub-horizontal terrestrial sediments and associated (sub-)volcanic rocks that have not been affected by penetrative deformation, but may show extensive brittle deformation structures. The Phanerozoic cover is divided (from old to young) into the Karoo Supergroup and East African Rift sequence. The former, which has been deposited during the break-up of Gondwana, has been further divided into Lower and Upper Karoo Groups. The East African Rift is divided into Lupata Group and the overlying terrestrial lithologic units deposited during Cretaceous, Tertiary and Quaternary. The lowermost lithology of the Phanerozoic sequence in the Map Explanation area is represented by coarse-clastic sandstones of the Permian Lower Karoo Group, best exposed below the overlying Karoo volcanics northwest of the Mázoè River. The Upper Karoo sediments mostly occur around the northern end of the Lupata Trough, while the Early Triassic/Early Jurassic Upper Karoo basaltic lavas and rhyolites form a domal structure around Serra Mevunge in the northwestern corner of the Volume 2 area. A bimodal magmatism is represented by the Lower Jurassic Rukore Suite. The felsic component comprises microgranite and related dykes and the mafic component by dolerite dykes and small microgabbro intrusions. The Jurassic Gorongosa Intrusive Suite comprises the prominent Serra da Gorongosa Mountain, situated in the eastern part of Volume 2 area. The mountain corresponds to an oval-shaped intrusive complex, consisting of a felsic core surrounded by mafic igneous rocks. The core lithologies comprise micropegmatite-granite, which has intruded surrounding tholeiitic gabbros. The Cretaceous Lupata Group is composed of coarse clastic sediments and an alkaline volcanic suite, mostly comprising phonolites and trachytes. Terrestrial, clastic sedimentary rocks assigned to the Cretaceous and overlying the Karoo and Lupata lithologies occupy large parts of the Volume 2 area, generally forming a flat, featureless countryside. Four stratigraphical units have been distinguished (from bottom to top): Sena, Grudja, Incomanini and Mágoè Formation*. Cretaceous carbonatites and associated alkaline rocks – nephelinite and phonolite plugs, and various alkaline dykes – occur throughout the area. Carbonatite Volume 2 Page 19 vents or plugs are located at Lupata Hill, Monte Muambe, Monte Chandava, Monte Salambídua, Monte Buzimuana and various nephelinite and phonolite plugs emplaced into the Sena Formation*. Minor related alkaline intrusions are Monte Chandava and Monte Buzimuana carbonatite rocks. The Xiluvo Carbonatite Complex, made up of suevites and alvikites, is located in the southeastern corner of the Volume 2 area. A wide belt of Neogene sands and soils extends from Beira northwards to Lake Niassa. KEY WORDS: Alkaline rock, areal geology, carbonatite, coal, Cretaceous, East Africa Rift, gold, Gondwana, geological mapping, gneiss, granitoid, inselberg, Irumide, Karoo, Manica, metamorphism, migmatite, Mozambique belt, Palaeoproterozoic, Pan-African, Phanerozoic, Precambrian, Proterozoic, schist, SHRIMP, Sm/Nd dating, structure, Tete, Umkondo, U/Pb dating, Zimbabwe craton. Volume 2 Page 20 RESUMO RESUMO EXPANDIDO – VOLUME 2 Antecedentes do Projecto - Como parte da política mineral do Governo de Moçambique, o Ministério de Recursos Minerais (MIREM), através da Direcção Nacional de Geologia (DNG), fomenta o desenvolvimento da infraestructura geocientífica da nação, apoiando a promoção de investimentos mineiros e o desenvolvimento econômico sustentável do país. O mapeamento geológico tem sido practicado em Moçambique desde os tempos coloniais e extensos levantamentos geofísicos, geoquímicos e geológicos tem sido feitos desde a independência. Os arquivos da DNG contém um abundante acervo de informações geocientíficas. Porém, uma grande parte desta informação é desactualizada em relação à tecnologia empregada e as concepções geológicas que apoiam a moderna exploração mineral. Portanto, é de extrema importância completar e modernizar a infraestructura geocientífica nacional. Para se alcançar isto, o Governo de Moçambique implementou o Projecto de Capacitação de Manejo de Recursos Minerais (PCMRM), como parte de um programa internacional maior. O objectivo principal do programa de mapeamento do PCMRM é de revisar os mapeamentos prévios em determinadas áreas e de melhorar a qualidade de mapas geológicos em outras, para que se consiga a ter uma cobertura consistente de todo o território Moçambicano em termos de qualidade. O mapeamento geológico é baseado nos princípios estratigráficos modernos e assim, o objectivo deste programa é também de resolver problemas estratigráficos, fornecer um bom controle geocronológico e solucionar problemas estructurais. Metodologia - A metodologia de implementação do projecto incluiu a execução de uma série de tarefas relevantes ao mapeamento, assim como um programa de treinamento dos funcionários da DNG. A preparação desta nova geração de mapas geológicos tem sido convenientemente subdividido em quatro fases: (1) Fase de preparação, (2) Compilação e síntese da informação geológica existente, (3) Fase de mapeamento e (4) Preparação dos productos finais. Os productos cartográficos digitais são baseados na interpretação interactiva de uma variedade de dados digitais (imagens de satélite, dados aeromagnéticos e radiométricos), trabalho de laboratório (petrologia, litogeoquímica e geocronologia, compreendendo SHRIMP, datação U-Pb e Sm-Nd convencionais) e verificação de campo. A interpretação interactiva das imagens compiladas e processadas (e.g. Landsat-7, banda 5 em combinação com três séries de dados radiométricos, i.e. K, eTh e eU, co-registradas em um pixel/grade de tamanho célula comum, após o qual estas foram “fundidas” em imagens compostas a cores pela aplicação de um algoritmo algébrico aos pixels/grades), se monstrou muito eficaz. Todos os dados, existentes e novos, foram incorporados ao Sistema de Informação Mineral (SIM) no formato ArcGIS, que pode ser consultado na DNG. Infraestructura e Geomorfologia - A infraestructura e geomorfologia da área coberta por esta Nota Explicativa do Mapa (Volume 2), referida como a “área de mapeamento”, serão discutidas nos Capítulos 3 e 4. O último inclui uma breve revisão das zonas fisiográficas ou ciclos, de acordo com King (1961) e se relaciona com o conceito de “tectônica do embasamento”. Litoestratigafia e geologia regional - Princípios lito- e tectonoestratigráficos modernos tem sido aplicados na prepação dos productos de mapas digitais. Para facilitar a correlação das Volume 2 Page21 unidades lito- e tectonoestratigráficos de Moçambique com os de países vizinhos, a geologia regional da África é brevemente revisada. Tabela A.1. Os domínios tectono-magmático-estructurais da África. Evento/Sistema Era Idade (Ma) Fase Principal Neoceno - Presente 23 - 0 Sistema de Rift do Leste Africano (SRLA) Fase Inicial Cretáceo - Paleoceno 140 - 23 Evento Karoo Carbonífero Superior- Jurássico Inferior 318 - 180 Terrenos Gondwânicos Plataformas Pós-Pan- Africanas < 542 Orogenia Pan-Africana Neoproterozóico- Cambriano 750 - 490 Pan-Africano Bacias do Pan-Africano Inicial Neoproterozóico 900 - 700 Kibariano/Irumidiano/Grenvilleano Mesoproterozóico 1450 - 900 Fase Tardio ~ 1860 Ubendiano/ Usagarano Fase Inicial Palaeoproterozóico 2100 - 2025 Crátons (terrenos granito-greenstone) e Faixas Móveis Arcaico 3800 - 2500 O continente Africano é composto por um mosaico de crátons e faixas móveis Arcaicos, amalgamados por cinturões dobrados Proterozóico-Cambrianos e cobertos por uma associação de sedimentos indeformados e rochas extrusivas de idades Neoproterozóica, Carbonífera Superior-Jurássica Inferior e Cretácea-Quaternária (Tabela A.1; Gabert 1984, Dirks & Ashwal, 2002). Os cinturões dobrados mais jovens, deformados durante as Orogenias Herciniana e Alpina, possuem uma extensão apenas local. As unidades litoestratigráficas que jazem sob o território de Moçambique, podem ser convenientemente subdivididos entre o embasamento cristalino de idade Arcaica-Cambriana e a cobertura Fanerozóica. O embasamento cristalino é composta por uma assembléia heterogênea de paragneisses, granulitos e migmatitos, ortogneisses e rochas ígneas. Do ponto de vista geodinâmico, aceita-se geralmente que o embasamento cristalino de Moçambique compõe-se de três terrenos2 distintos, que se colidiram e amalgamaram durante o Ciclo Orogênico Pan-Africano (COPA). Antes da amalgamação Pan-Africana, cada terreno foi caracterizado por uma evolução geodinâmica específica. Estes terrenos são provisoriamente denominados como os Terrenos Gondwana Leste, Gondwana Oeste e Gondwana Sul (Tabela 5.4). A evolução geodinâmica e as margens - as suturas destes Terrenos serão discutidos no Capítulo 11. Estando localizado próximo à juncção tripla entre a faixa Irumide (~1.02 Ga), faixa Zambezi (~850-450 Ma) e a faixa Moçambique (750-550 Ma), a geologia do embasamento da área de mapemento é extraordinariamente complexa, com a presença de todas estas três faixas: ● Gondwana Sul – Compreende o Cráton Zimbabwe e várias unidades tectono- ou litoestratigráficas em cinturões dobrados Proterozóicos, que foram empurrados ou depositados no topo da margem norte e leste do Cráton. A sua borda norte corresponde com a Faixa Pan-Africana Damara-Lufiliano-Zambezi (DLZ) e falha Sanângoè, sobreposta. ● Gondwana Leste – Compreende o Cráton Congo/Tanzania ou África Central e várias unidades tectono- ou litoestratigráficas em cinturões dobrados 2 O termo ”terreno” é utilizado para indicar a unidade tectônica de dimensôes variáveis, i.e. uma placa litosférica, um fragmento de placa ou lasca ou ainda, uma massa tectônica como o “nappe”. Por outro lado, o “terreno” é um termo genérico, similar à “área”. Volume 2 Page 22 Proterozóicos, que foram empurrados ou depositados no topo da margem sul e leste do Cráton. Na Tanzania, a frente do empurrão vergente a oeste da Faixa Moçambique, marca o limite entre os Terrenos Gondwana Oeste e Gondwana Leste. Mais ao sul, esta sutura é pobremente definida, mas no Bloco Tetê- Chibata – um fragmento tectônico menor delimitado pela Zona de Cisalhamento Sanângoè e o Deslocamento Mwembeshi – esta sutura corresponde supostamente ao contacto entre o domínio maior de direcção WSW-ENE e o Grupo Angónia, de direção NW-SE. A Suíte Furancungo (Granito Desaranhama), igualmente de direcção NW-SE, representa supostamente a soleira da massa de empurrão Angónia, pertencendo, porém, ao Terreno Gondwana Oeste (GTK Consortium 2006d). ● Gondwana Leste – Na Tanzania, este compreende o embasamento cristalino – os Granulitos Orientais – a leste da sutura Pan-Africana. Mais ao sul, este compreende a maioria das rochas em Malawi e Moçambique setentrional. O seu núcelo Arcaico é supostamente localizado em Madagascar e Índia. Na área de mapeamento, o embasamento cristalino pertence quase que inteiramente ao Terreno Gondwana Sul e ao Suíte Gabro-Anortosítico de Tête (SGAT). O Terreno Gondwana Sul compreende o Cráton Zimbabwe, Arcaico – sendo parte do Cráton Kalahari – e várias unidades empurradas em cinturões dobradas Proterozóicas, que serão discutidas nos Capítulos 6 e 7, respectivamente. A Suíte Tête é considerada uma massa de empurrão alóctone (vide Capítulo 8), sendo agora a sua maior parte localizada ao sul da Zona de Cisalhamento Sanângoè, mas tendo sido originado mais provavelmente a partir do Terreno Gondwana Oeste, ao norte da Zona de Cisalhamento Sanângoè. Cada Terreno mencionado acima, é producto de desenvolvimento geodinâmico específico e individual. Os princípios da geodinâmica e da formação crustal – Ciclo de Wilson, de Supercontinentes e Superplumas – säo brevemente revistos na Secção 5.4. EMBASAMENTO DO GONDWANA SUL – CRÁTON KALAHARI Rochas Arcaicas em Moçambique – A margem oriental do Cráton Arcaico de Zimbabwe extende-se a Moçambique (Capítulo 6). A parte norte da margem oriental do Cráton é atribuída ao Complexo Mudzi (Capítulo 6) e a parte sul, ao Complexo Mavonde. Na sua parte meridional, o Cráton é composto por um terreno granito-greenstone clássico. Os supracrustais do cinturão de rochas verdes Mutare-Manica são atribuídas ao Grupo Manica, que tem sido subdividida (da base ao topo) em Formações Macequece e Vengo*. Rochas do cinturão greenstone Cronley-Munhinga são atribuídas ao Grupo Munhinga, que supostamente corresponde ao Grupo Manica. No contexto dos terrenos granito-greenstone, seria lógico subdividir as rochas félsicas em, ao menos, rochas félsicas mais antigas e mais jovens do que as rochas supracrustais nas faixas de rochas verdes. A presente situação do mapeamento e, em particular, o insuficiente conhecimento geocronológico, näo permitem isto. Consequentemente, todas as rochas félsicas (com menores intercalações ultramáficas) tem sido atribuídas ao Complexo Mavonde. As rochas félsicas mais antigas que ~2.64 Ga são atribuídas aos “Granitos Mais Antigos”. Complexo Mudzi (A3Mq) - As rochas do Complexo Mudzi estão expostas ao longo da margem norte do Cráton Zimbabwe e se extendem ininterruptamente a Moçambique na região de Cuchamano (SDS 1631/1632), povoado de Mudze Chizimwe (SDS 1633, Fig. 6.2., perfil) e mais ao sul (SDS 1732/1733, 1832/1833). Volume 2 Page 23 As litologias félsicas do Complexo Mudzi ocorrem em estructuras dômicas (e.g. Monte Senga Senga) ou em seqüências de gneisses bandadas Arcaicas, empilhadas por empurrões, com a separação do embasamento/cobertura (thin-skinned) e com intercalações de metagabros Arcaicos, que possuem um mergulho suave a sul e ocorrendo sub- e sobrejacentes aos xistos e quartzitos Gairezi. As unidades mapeáveis seguintes tem sido atribuídas ao Complexo Mudzi: Ortogneisses Félsicos, que compreendem (1) Quartzo- Monzonitos/Quartzo-Monzodioritos (A3Mqm), (2) Granitóide Foliado, localmente porfirítico (A3Mgr) e (3) Gneisse TTG, Granitóide Foliado (A3Mgn), com idades U-Pb magmáticas variando de 2600 a 2710 Ma. Os membros máficos subordinados incluem: (4) Gneisse Granodiorítico, contendo bandas amfibolíticas (A3Mgd), (5) Metagabro (A3Mgb) e (6) Amfibolito/Granada-Amfibolito (A3Mam). Finalmente, a menor proporção do Complexo Mudzi é composta por gneisses com protólito sedimentar e inclui (7) Granada-Gneisse (A3Mgg). A relação estratigráfica mútua entre estas unidades permanece desconhecida. Portanto, a sucessão destas litologias na legenda do mapa näo possui um significadocrono- estratigráfico. As análises SHRIMP de zircões zonados dos Ortogneisses Mudzi (A3Mgn), expostos em uma estructura dômica Arcaica, fornecem três idades diferentes: ● Zircões zonados constituem uma sub-série mais antiga com a idade magmática de 2713±22 Ma, ● Estes zircões sofreram um evento metamórfico a ~2.54 Ga, indicado pela neoblastese e sobre-crescimentos metamórficos do zircão. Isto pode representar a fase de retrabalhamento e rehidratação sob condições de fácies amfibolito para rochas equivalentes em Zimbabwe, referidos por Barton et al. (1991) e Vinyu et al. (2001), ● Uma sobre-impressão metamórfica Pan-Africana a 520±16 Ma. As datações de zircões por U-Pb convencional de gneisses similares, forneceram resultados comparativos. A plotagem concórdia das três fracções de zircões fornecem uma idade de interceptação superior de 2632±3 Ma. Como acima, a interceptação mais baixa a 554±33 Ma reflecte a sobre-impressão Pan-Africana. Complexo Mavonde (A3V) - O conjunto de granitóides do Cráton Zimbabwe é mais jovem que o Supergrupo Bulawayo Superior, sendo assim, mais jovem que as rochas do Cinturão de Rochas Verdes Manica e incluindo as Suítes Neoarcaicos Wedza (~2.65 Ga) e Chilimani (~2.60 Ga). Porém, mapeamento e dados geocronológicos insuficientes não podem excluir a presença de granitóides mais antigos. Os granitóides TTG formam um domínio bastante uniforme e amplo, extendendo-se ao longo da fronteira com Zimbabwe por ~200 km, a meio caminho entre as cidades de Manica e Chimoio, constituindo uma paisagem suave e ondulada, com raros e inconspicuos Inselbergs, que subjazem as cristas estreitas com direcção norte, formados por quartzitos Gaireze em estructuras sinclinais (SDS 1832/1833 e 1932/1933). A parte oeste do domínio, próxima à fronteira com Zimbabwe, é caracterizada por uma topografia de montanhas mais elevadas. Os granitóides Neoarcaicos no Complexo Mavonde é caracterizada, em termos gerais, por composições graníticas a tonalíticas (e.g. gneisse TTG). Variedades aplíticas e migmatíticas estão presentes em certos locais. Gneisses máficos e metagabro são tipos de rochas subordinados. Os granitóides apresentam geralmente cor cinza e possuem granulação bastante fina a média, sendo variavelmente foliadas e gradando localmente a rochas porfiríticas. Sendo suavemente foliadas nas suas porções ocidentais, o Complexo Mavonde assume progressivamente uma foliação e mergulho mais accentuados a leste, possuindo uma direcção N-S, manifestando o cisalhamento dúctil do Pan-Africano Tardio. Para leste, porém, Volume 2 Page 24 pode se observer a manifestação da deformação progressiva, causada pelo cisalhamento dúctil Pan-Africano. Porém, as relações mútuas entre as diversas litofácies dos granitóides não são conhecidas. O Gneisse TTG, félsico e variavelmente bandado (A3Vgn e A3Vbgn) e Tonalito/Granodiorito (A3Vto) foram mapeados em várias localidades. O maior corpo de Granito Porfirítico e Granodiorito (A3Vpgd), com cristais comuns de feldspato alcalino com 2-4 cm de comprimento, ocorrem ao sul da estrada Manica-Chimoio. A hornblenda domina entre os minerais máficos. Os tipos discretamente foliados a não-foliados, ocasionalmente com feldspatos alcalinos grosseiramente orientados, incluem o Granito Aplítico (A3Vagr), Granito (A3Vgr), Granito Maciço (A3Vbmgr) e Granito Migmatítico (A3Vmi). Os membros foliados incluem o Granito Foliado, localmente porfirítico (A3Vpg). As variedades mais máficas incluem o Ortogneisse Máfico a Intermediário (A3Vogn) e Metagabro (A3Vgb). O Pegmatito (A3Vpm) é supostamente a rocha ígnea mais jovem. Os granitóides do Complexo Mavonde säo peraluminosos ou metaluminosos e são classificados no campo dos granitos, tendo uma uma menor proporção de composições granodioríticas, tonalíticas ou quartzo-monzodioríticas. Nos diagramas TAS, os componentes máficos são toleíticos e os componentes félsicos, entre calco-alkalinos e toleíticos. A classificação lito-geoquímica sugere uma assinatura predominantemente “entre-placas” e “arco vulcânico”, implicando uma origem de granitos do tipo A para alguns dos granitóides. Não se pode distinguir uma diferença entre os granitóides e gabros dos complexos granitóides Mudzi e Mavonde. A geocronologia do zircão desta rocha forneceu um grande leque de idades entre < 2.65 Ga e ~2.5 Ga. Necessita-se de mais dados para resolver a crono-estratigrafia dos granitóides do terreno granito-greenstone do lado leste do Cráton Zimbabwe em Moçambique. Granitóides mais antigos (A2gt) - Os “Granitóides mais antigos” são evidenciados por uma amostra de gneisse tonalítico, coletado ao longo da estrada Manica-Chimoio, a 5 km a leste de Manica. A datação U-Pb SHRIMP forneceu a a idade magmática concórdia de 2907±16 Ma. Os núcleos alterados, metamícticos, indicam idades-zircão mais antigos de componentes herdados. A idade sugere a correlação com a Sebakhewan em Zimbabwe. A extensão de este tipo de rocha na área é desconhecida. As margens norte e sul do segmento de Mutare são cercadas por granitos intrusivos. No limbo norte do sinclinório, stocks de quartzo-diorito intrudem as rochas verdes em Penhalonga e na Velha Missão de Mutare. O stock quartzo-diorito-tonalito-granodiorito Penhalonga, datado em 2741±3 Ma (Chenjerai et al. 1993), é a intrusão mais antiga no cinturão de rochas verdes. Outra unidade litológica (A3Mpgn), considerada mais antiga que o cinturão de rochas verdes de Manica, é também atribuída aos “Granitos mais antigos”. A rocha é um biotita- gneisse de granulação média a grossa, possuindo feldspato alkalino do tipo Augen, com foliação e lineação, além do dobramento de pequena escala, exposta sobre uma superfície com dimensões de 25 x 25 km, a leste de Rotanda (SDS 1932/1933). A unidade subjaz a sedimentos e metasedimentos dos Grupos Umkondo e Gairezi. As relações de contacto com os granitóides circundantes não são claras. Grupo Manica (A3M) - O Segmento Mutare do Cinturão de Rochas Verdes de Manica é um sinclinório mergulhante a leste, composto por uma seqüência basal vulcano-sedimentar e uma superior, dominada por sedimentos, ambas atribuídas ao Grupo Manica. A litoestratigrafia basal de rochas verdes não é bem estabelecida. Wilson (1979) colocou a seqüência dominada por vulcânicas nas “Rochas Verdes Superiores” do Supergrupo Bulawayo Superior e a sucessão metasedimentar Mbeza superior no Supergrupo Shamvaian. Porém, em algumas Volume 2 Page 25 publicações posteriores, o Grupo Bulawayo foi interpretado como correspondendo às “Rochas Verdes Inferiores” (Foster & Wilson 1984). Seguindo Hunting (1984), a seqüência basal de rochas verdes, dominada por vulcânicas no Segmento Mutare do cinturão de rochas verdes de Manica, é referida como a Formação Macequece*. As supracrustais inconformavelmente sobrejacentes, dominadas por sedimentares, são atribuídas à Formação Vengo*. A Formação Macequece* (A3MM) é principalmente composta por metavulcânicas ultramáficas e máficas e seus productos derivados retrogressivos e metassomáticos, como serpentinitos e talco+ clorita+tremolita-xistos, com intercalações de formações ferríferas bandadas (BIF), metacherts e conglomerados polimícticos, cobertos por rochas metavulcânicas andesíticas, dacíticas e riodacíticas, de origem predominantemente piroclástica. A geoquímica das rochas metavulcânicas Macequece mostra um amplo leque de composições, com tufos a cristal mais ácidos no “campo dos riolitos”, os feldspato pórfiros no “campo dos riodacitos a dacitos” e as vulcânicas máficas e intermediárias no “campo dos andesitos e basaltos sub-alkalinos”. As rochas metavulcânicas ultramáficas, com a textura spinifex e os serpentinitos, mostram a afinidade komatítica. As unidades mapeáveis a seguir foram identificadas (grosseiramente da base para o topo): (1) Serpentinito e Meta-komatíto (A3MMsc), (2) Talco-clorita-xistos (A3MMtc), (3) Rocha Metavulcânica Máfica e Ultramáfica (A3MMro), (4) Metabasaltoe Xisto Máfico (A3MMba), (5) Rocha Metavulcânica Máfica e Intermediária (A3MMtu), (6) Brecha (A3MMbr), (7) Rocha Ferrífera Bandada (A3MMtcf), (8) Metachert (A3MMch), (9) Formação Ferrífera Bandada (A3MMbaf), (10) Quartzo-Sericita-Xisto (A3MMqss), (11) Diamictito (A3MMdi), (12) Metagré Lítico Rico em Ferro (A3MMss), (13) Tufo Félsico a Cristal (A3MMff), (14) Quartzo-Feldspato Pórfiro (A3MMqp), (15) Brecha-Tufo (A3MMtb), (16) Conglomerado Vulcânico (A3MMvc), (17) Rocha Vulcânica Intermediária (A3MMiv), (18) Aglomerado (A3MMag), (19) Rochas Metavulcânicas Félsicas (A3MMfv). A idade-modelo da galena de 2650 Ma, de um depósito de ouro estructuralmente hospedado, apresenta a idade mais confiável para as litologias do cinturão de rochas verdes. A idade correspondente ao Bulawayo Superior pode corresponder às condições de pico metamórfico que afetou os supracrustais do cinturão de rochas verdes, um pouco mais antigo. A Formação Vengo* (A3MV) pode ser correlacionada com os sedimentos Shamvaian do Arcaico Superior em Zimbabwe, repousando inconformavelmente ou com contactos tectônicos sobre rochas verdes metavulcânicas, contendo material clástico grosseiro derivado de terrenos granito-greenstone. As rochas da Formação Vengo* tem três áreas maiores de ocorrência, sendo as mais extensas a faixa sinforme com a largura de 1-1.5 km e com a direcção E-W, começando a partir da Serra Vengo e seguindo em direcção a leste por ~15 km. Esta unidade é a continuação da Série Mbeza de Zimbabwe (Wilson 1979). As litologias maiores compreendem conglomerados basais, grafita-filitos e sericita- xistos com finas intercalações de quartzitos com mármore cinza, rocha ferrífera bandada e quartzito lítico ferruginoso. As seguintes unidades mapeáveis foram identificadas (grosseiramente da base ao topo): (1) Conglomerado Vulcânico (A3MVo), (2) Conglomerado Polimítico (A3MVclo), (3) Quartzito (A3MVqz), (4) Metagrauvaca (A3MVgy), (5) Filito e Grafita-Xisto (A3MVps), (6) Rocha Ferrífera Bandada (A3MVfe), (7) Metachert (A3MVch), (8) Mármore (A3MVma), (9) Quartzo-Sericita Xisto (A3MVqs), (10) Meta-Arcóseo e Quartzito Arcóseo (A3MVar) e (11) Mica-Xisto (A3MVmc). As litologias da Formação Vengo* são compreendidas entre ~2613 e ~2601 Ma (cf. Hofman et al. 2002). Grupo Munhinga (A3MH) - O Cinturão de Rochas Verdes Cronley-Munhinga é localizada a cerca de 50 km ao sul do Cinturão de Rochas Verdes Mutare-Manica e continua em Volume 2 Page 26 Moçambique por cerca de 25 km na direcção ~E-W, quando se curva em direcção ao norte e afinando-se até desaparecer. Diferentemente do Cinturão de Rochas Verdes Mutare-Manica, a estreita seqüência Cronley-Munhinga está somente desenvolvido de modo incompleto, compreendendo apenas metavulcânicas máficas e ultramáficas, os seus derivados metasomáticos e quartzito. Em Moçambique, somente (1) Rocha Metavulcânica Ultramáfica e Talco-Clorita Xisto (A3MHuv), (2) Quartzito (A3MHqz) e (3) Rocha Ferrífera Bandada (A3MHfe) são expostas no Cinturão de Rochas Verdes Cronley-Munhinga. Grupo Umkondo (P2U) - O Grupo Umkondo forma uma seqüência Proterozóica de metasedimentos e metalavas basálticas a andesíticas sub-horizontais de baixo-grau, que repousam inconformavelmente sobre litologias Arcaicas da Faixa Limpopo oriental e Cráton Zimbabwe (SDS 1932/1933, 2032/2033). Duas novas unidades litoestratigráficas foram definidas pelo Consórcio GTK, compreendendo derrames basálticos subaéreos da Formação Espungabera* (P2UEv) (topo) e metasedimentos bem preservados da Formação Dacata* (P2UD) (basal). A última Formação* é subdividida em cinco membros (da base para o topo): O Membro Quartzítico Inferior (P2UDlq), Membro Grafita-Xisto (P2UDsc), Membro Chert (P2UDch), Membro Siltito (P2UDs) e Membro Quartzito Superior (P2UDqz). Destes, somente os Membros Quartzito Inferior e Siltito são encontrados na área do mapeamento. Não existe informação geocronológica direta. A correlação da seqüência Umkondo com o Grupo Ahlmannryggen da leste da Antarctica, de ~1130 Ma, pode sugerir uma idade Mesoproterozóica (Munyanyiwa, 1997; Thomas, 1998; Masters, 2006). Porém, uma idade Paleoproterozóica não pode ser excluída (vide abaixo). Diques de Doleritos e Microgabro - Três grupos de diques máficos foram intrudidos no terreno granito-greenstone do Cráton Zimbabwe Oriental: (1) diques máficos no Cinturão de Rochas Verdes de Manica-Mutare, (2) metadoleritos nos gneisses Arcaicos e metasedimentos do Grupo Gairezi e (3) diques e sills dos doleritos micro-gabróicos de Mashonaland nos quartzitos Umkondo. Anteriormente, todos os diques eram agrupados em uma família e denominados de Doleritos Umkondo (doleritos pós-Unkondo, Hunting 1984), pertencendo à “Província Ígnea de Umkondo”, com uma idade mesoproterozóica de ~1100 Ma (e.g. Wingate, 2001). A datação Sm/Nd recente, efectuado pelo Consórcio GTK, forneceu uma idade de 1102+52 Ma, confirmando o dado geocronológico mais antigo. O dolerito intrudido no Cinturão de Rochas Verdes de Manica é datada de 1783±51 Ma e o metadolerito foi datado de 973±73 Ma. Os valores epsilon diferentes e os diagramas de discriminação lito-geoquímicas indicam fontes de magma diferentes para os doleritos Mashonaland Mesoproterozóicos e os doleritos Paleoproterozóicos da área de Manica. EMBASAMENTO DO GONDWANA SUL – AS FAIXAS DE DOBRAMENTOS PROTEROZÓICAS Introducção - As faixas de dobramentos Proterozóicas, que ocorrem ao longo da margem norte e leste do Cráton Zimbabwe, se extendem a Moçambique. A Faixa Zambezi, de direcção E-W, parte da Faixa continental Damara-Lufiliana- Zambezi (DLZ), flanqueia o Cráton Zimbabwe ao norte. Esta faixa orogênica contém uma pilha de massas de empurrão ou “nappes”, que incluem componentes Arcaicos (>2.5 Ga), Mesoproterozóicos (~1.0-1.4 Ga) e Neoproterozóicos (0.8-0.5 Ga)(Dirks et al. 2003). A Faixa Volume 2 Page 27 Zambezi meridional é largamente composta por dois nappes (estructuralmente do topo à base e de N to S): ● Terreno Alóctone Zambezi – Compreende os Suítes Metamórficos Mavuradonha e Masoso, de alto grau (fácies granada-granulito) sensu Barton et al. (1985; 1991), re- nomeados Complexo Mavuradonha e Complexo Masoso nesta Nota Explicativa do Mapa. ● Terreno Gneisse Marginal – Subdividido em Zimbabwe em Suíte Metamórfico Chimanda e Suíte Metamórfico Rushinga. Somente a última unidade, renomeado de Grupo Rushinga nesta Nota Explicativa do Mapa, extende-se a Moçambique. As massas estructurais do Terreno Gneisse Marginal estão tectonicamente sobrepostos ao Terreno Gneisse Migmatítico alóctone do Cráton Zimbabwe (vide a Seccao 6.1.1.). Os granitóides Neoproterozóicos tem sido aparentemente emplaçados ao longo de plano de empurrão entre estes dois terrenos e são incorporados por Barton et al. (1991) no Complexo Intrusivo Basal de Rushinga (CIBR), re-nomeado como Suíte Intrusivo Basal de Rushinga (SIBR) nesta Nota Explicativa do Mapa. A margem leste do Cráton Kalahari é parte da Faixa Moçambique, com direcção N-S e esta pode também ser subdividida em um número de massas de empurrão ou unidades tectono-estratigráficas: ● Grupo Gairezi – O Grupo Gairezi é composto por metasedimentos fortemente deformados, empurrados e dobrados junto com gneisses Arcaicos e repousam inconformavelmente sobre estes. ●Complexo Báruè – O conjunto de rochas Proterozóicas ocorrentes ao longo da margem oriental do Cráton Zimbabwe, a sul da latitude 17.5° S, é atribuída ao Complexo Báruè. ● Suíte Guro – A suíte magmática bimodal de idade ~ 850 Ma, compreende granito aplítico e migmatito, alternado com metagabro e migmatito máfico. Suíte Metamórfico Mavuradonha (P3MV) - O Complexo Metamórfico Mavuradonha tem uma extensão bastante limitada ao longo do Rio Luia, próximo á fronteira com Zimbabwe (SDS 1632). A unidade ocorre na forma de uma seqüência de gneisses máficos e félsicos, que podem ser correlacionados com o Metagabro Gungwa e a Formação Nyamasoto* em Zimbabwe. A sucessão é compostapor gneisses fortemente deformados, foliados e dobrados, megulhando suavemente (~20-50°) para NNW a NNE, apresentando um bandamento composicional distincto de bandas e listras félsicos e máficos. São comuns os fragmentos de feldspato alcalino arredondados, com até 5 cm de diâmetro e provavelmente derivados da boudinagem de diques pegmatíticos, assim como porfiroblastos de hornblenda verde escuras, com um diâmetro de 1-5 mm. A origem destes gneisses composicionalmente bandadas é de certo modo obscuro; mesmo que algumas das bandas máficas possam representar diques gabróicos achatados e foliados, os contactos muitas vezes difusos das bandas e listras sugerem uma origem piroclástica ou vulcanoclástica à estas rochas. Näo existem dados de idade para os gneisses Mavuradonha. Fábricas dúcteis ao longo do Empurrão Mavuradonha tem dado a idade de 820 Ma (Barton et al. 1991). Complexo Metamórfico Masoso (P3MO) - Os contactos norte e leste do Complexo Metamórfico Masoso (SDS 1632) são definidos por falhas normais contra o Supergrupo Karoo (fig. 7.2) e a Formação Mágoè*, do Cretáceo. O contacto meridional com a Suíte Guro é formado por uma série de planos de falhas de empurrão, com direcção grosseiramente a E- W e vergentes ao norte. O contacto de falha setentrional com as rochas Karoo é caracterizada por uma forte brechação e milonitização. Volume 2 Page 28 As rochas mais distantes do plano de falha aparentemente escaparam do cisalhamento frágil, preservando assim, o seu bandamento composicional distincto, definido por camadas mais escuras, alternadas com camadas mais félsicas, quartzo-feldspáticas rosadas, que possuem bastante pequenos porfiroblastos de feldspato alcalino róseo. As camadas ricas em amfibólio variam de lâminas esverdeadas a horizontes amfibolíticas verde escuras, com espessuras locais de vários metros. Localmente são encontrados grandes segregações de porfiroblastos de hornblenda, com dimensões de até 15 cm, assim como muitos porfiroblastos pequenos de granada, de 2-8 mm em diâmetro. Duas gerações de pegmatitos a microclínio, tanto sin- como pós-tectônicos, invadiram os gneisses bandados, que são também intersectados por diques basálticos da Suíte Rukore e por um enxame de finos veios de calcedônia com fluorita, de direção NE (Barton et al. 1991). Xenólitos máficos contendo granada, com diâmetros de alguns centímetros a 2-3 m e relembrando eclogitos, são encontrados nos gneisses listrados ao longo do Rio Luia. As idades publicadas (e.g. Barton et al. 1991; Maringa et al. 1998; Vinyu et al. 1999) confirmam que ao menos dois eventos tectono-metamórficos afetaram a margem setentrional do Cráton Zimbabwe e que os protólitos das unidades Proterozóicas devem ser mais antigas que 850 Ma. Barton et al. (1991) sugerem que esta idade reflecte apenas um evento (emplaçamento do nappe tectônico), dentro de uma evolução geodinâmica muito mais complexa. Alternativamente, esta idade pode reflectir a fase da empurrão de descolamento extensional (Dirks et al. 1998). O evento tectônico mais jovem, entre 600 e 500 ma, reflecte o “Pan-Africano sensu stricto” e manifesta a colisão entre o Gondwana Sul e Oeste. A geocronologia da Suíte Masoso relembra em grande parte os dados similares da Suíte Guro. Grupo Rushinga (P1R) - Na área coberta por esta Nota Explicativa do Mapa, as rochas do Grupo Rushinga ocorrem ao longo da fronteira com Zimbabwe no domínio norte (SDS 1631/1632), separada do domínio sul por uma protrusão da fronteira internacional (SDS 1633, 1732/1733). A abundância de diques máficos e félsicos ou plutões (Suíte Intrusiva Rukore) do Karoo Tardio no domínio norte e a ausência destas no domínio sul é um facto surpreendente. Baseado na secção estratigráfica-chave no Monte Pitão (Canto SE da SDS 1632), o Grupo Rushinga tem sido subdividido em Moçambique em (1) Formação Rio Embuca*(P1RE), quartzo-feldspática a pelítica e (2) Formação Monte Pitão (P1RP), mármores e rochas calco-silicatadas. A sucessão difere fortemente da coluna estratigráfica estabelecida por Barton et al. (1991) em Zimbabwe, como mostrado na Tabela 7.1. A Formação Rio Embuca* inclui (da base ao topo) (1) Quartzito Inferior (P1REa), (2) Gneisse Quartzo-Feldspático (P1REqf), (3) Meta-Arcóseo/Quartzito (P1REa) e (4) Biotita Xisto (P1REch). O Quartzito Inferior (P1REqz), feldspático a orto-quartzítico, com lentes de Metaconglomerados (P1REc), é exposta principalemente ao longo de suaves cristas e restando directamente sobre os gneisses do embasamento Arcaico, com um contacto supostamente tectônico. Meta-Arcóseo/Quartzito Arcóseo (P1REa), é uma rocha quartzo-feldspática levemente amarelada a castanho-rosada, de granulação mediana e finamente bandada. Esta é geralmente associada com amfibolitos bandados. A sua similaridade geral com algumas variedades félsicas da Suíte Guro podem localmente dificultar a separação entre estas unidades rochosas. Biotita Xisto (P1REch), que geralmente contém granada e silimanita, forma horizontes finas mas contínuas ao longo dos supracrustais do Rushinga. As variedades transicionais de quartzitos a silimanita a gneisses feldspáticos com nódulos de silimanita são comuns. Os xistos aluminosos compreendem localmente só porfiroblastos de granada e silimanita fibrolítica, com teores de Al2O3 de até 24%, sugerindo assim, um protólito de paleosolo. A Formação Monte Pitão* compreende (da base ao topo) (1) Amfibolito Bandado (P1RPa), (2) Gneisse Calco-Silicatado (P1RPcc), (3) Mármore Inferior (P1RPm1), (4) Biotita Volume 2 Page 29 Gneisse (P1RPgn), (5) Mármore Superior (P1RPma) e (6) Quartzito Superior (P1RPq). Amfibolitos Bandados (P1RPa) e os gneisses a hornblenda associados, formam horizontes sub-contínuos. A secção, localizada no Rio Mazoe, a ~ 2 km a E da fronteira com Zimbabwe, compõe-se de predominantemente de amfibolitos bandados e gneisses quartzo-feldspáticos. Rochas Calco-Silicatadas (P1RPcc) são geralmente associados com mármores e gneisses pelíticos. Os gneisses calco-silicatadas são rochas de granulação média, variavelmente foliadas, apresentando um bandamento composicional distincto. A alteração intempérica de camadas ou enclaves de mármore deixam geralmente finas, mas profundas cavidades de dissolução em superfícies alteradas. As análises SHRIMP de zircões detríticos de biotita-granada-silimanita xisto da Formação Rio Embuca*, efectuadas pelo Consórcio GTK, demonstraram a idade máxima de ~2.0 Ga. Esta é considerada como a época do desenvolvimento da bacia Rushinga e a deposição da seqüência sedimentar. Acredita-se que os zircões mais antigos, com idades SHRIMP de 2.54 e 2.8 Ga, representem grãos detríticos derivados do Cráton Zimbabwe. A idade da sedimentação Paleoproterozóica para o Grupo Rushinga é confirmada pelos elevados valores de δ13 das rochas carbonáticas, claramente superiores aos valores marinhos normais de 0‰. Estes valores altos não podem ser explicados pela alteração secundária e muito provavelmente representam períodos de excursões de δ13 marinhas positivas, características do período de 0.6-1.0 Ga ou de 2.0-2.3 Ga. Devido à ausência de zircões detríticos mais jovens que ~ 2.0 Ga, uma idade deposicional mais jovem é considerada como improvável. Grupo Gairezi (P1Z) – As rochas tradicionalmente atribuídas aos Grupos Gairezi e Fronteira ocorrem junto à fronteira entre Zimbabwe e Moçambique. Na Província de Manica estes são encontrados em forma de uma faixa alongada que começa na Monte Senga Senga (norte) e continua quase até o Rio Save (sul). As litologias do Grupo Gairezi podem ser facilmente distinguidos dos granitóides e litologias Arcaicos subjacentes do Complexo Báruè, tanto em fotografias aéreas (Hunting, 1984) como em imagens Landsat. Estes formam terrenos montanhosos elevados, com cristas longas, accentuando-se claramente dos terrenos suaves a leste e oeste. Os autores anteriores (referências em Hunting, 1984) já denotaram as grandes diferenças entre as rochasdo “Sistema Fronteira/Série Gairezi”, consistindo em metasedimentos fortemente deformados e recristalizados, dobrados juntamente com gneisses Arcaicos e jazendo, em maior parte, incomformavelmente sobre estes e os estratos de relevo baixo e pouco ou não-metamorfisados do Grupo Umkondo (vide a Secção 6.5). Na década de 1960, pesquisadores da Universidade de Leeds (referências em Hunting, 1984) e subsequentemente Barton et al. (1991), contrariaram este ponto de vista, baseado em elementos estratigráficos comuns em ambas as successões. Eles argumentaram que a “Série Gairezi” era o equivalente estratigráfico da parte basal do “Sistema Umkondo” e que as diferenças litológicas maiores eram explicadas pelas variações de fácies entre as unidades. Consequentemente, ambas as seqüências foram atribuídas ao “Sistema Umkondo”, sendo as exposições a oeste colocadas sob os termos de fácies Rhodesianos ou Inhangas e as do leste, sob fácies Moçambique, Fronteira ou Gairezi. A DNG tem apoiado esta subdivisão ao adotar o termo “Sistema Umkondo” para todas as rochas supracrustais e agrupando as exposições a oeste e leste nas Formações Umkondo e Fronteira, respectivamente. Hunting (1984) atribuiu as rochas que formam a Serra Gairezi na parte norte da Província Manica ao Grupo Gairezi2 . As litologias que formam a Serra Sitatonga e as Montanhas Chimanimani a sul, foram incluídos por este no Grupo Fronteira. A análise das imagens Landsat e fotografias aéreas demonstram, porém, que as litologias que, segundo Hunting (1984), pertencem aos grupos Gairezi e Fronteira, são, 2 Para uma breve história da nomenclatura estratigráfica, vide o parágrafo 3.2.4. Volume 2 Page 30 na verdade, restos erosionais da mesma seqüência metasedimentar e, consequentemente, o Consórcio GTK atribuiu ambos ao Grupo Gairezi. O Grupo Gairezi consiste predominantemente em xistos pelíticos e orto-quartzitos brancos a cinzentos. Mármore e meta-conglomerados polimíticos são subordinados. As relacções estratigráficas entre estes vários tipos de metasedimentos permanecem obscuros (Tabela 7.3). Lentes e camadas de Meta-conglomerado (P1Zc) intraformacional e polimítico são encontradas na parte basal do Quartzito (P1Zq) na região de Chicamba Real. Os clastos compreendem outras rochas supracrustais, como xistos, em adição a gneisses graníticos e granodioríticos (Fig. 7.27C). Finas intercalações de Mármore (P1Zmb), de granularidade média e cor cinza-branco a vermelho-salmão, são comumente expostas na parte norte (e.g. a oeste de Monte Senga-Senga; Fig. 7.28). Cristas proeminentes de Quartzito Sacaróide (P1Zqs), de cor branca, ocorrem na parte sul da área de mapeamento (SDS 1932-1933) Ao norte, a oeste do povoado de Catandica, quartzitos similares ocorrem na forma de finas, mas contínuas cristas, formando uma estrutura anelar peculiar de ortoquartzito do Monte Senga- Senga, cercando um domo gnéissico Arcaico. Feições primárias, como o acamadamento plano-paralelo ou cruzado, são raramente visíveis (Fig. 7.27C). Xistos pelíticos e semi- pelíticos alternam com ortoquartzitos. Xistos aluminosos (P1Zss) são predominantemente muscovita-biotita- e clorita xistos e estão expostos na região elevada a leste de Catandica. Porfiroblastos de granada e silimanita são comuns nas rochas dominadas por muscovita (e.g. N e E do reservatório de Chicamba). Prismas de cianita, localmente com até 5 cm de comprimento, ocorrem em uma quantidade substancial nos estratos metapelíticos do Grupo Gairezi ao redor do Monte Senga-Senga (Fig. 7.31A). As análises SHRIMP de zircões detríticos do granada-cianita xisto do Grupo Gairezi sugerem uma idade máxima de 2041±15 Ma e proveniência Arcaica para sedimentos metapelíticos do mesmo (7.6.3). Esta idade máxima é marcadamente similar à idade máxima encontrada nos metasedimentos do Grupo Rushinga (Secção 7.4.6). As similaridades litológicas entre os grupos Gairezi e Rushinga, especialmente na sua parte basal (Formação Rio Embuca*), junto com os resultados das idades e a continuidade regional ininterrupta, sugerem que o Grupo Gairezi e a parte basal do Grupo Rushinga sejam estratigraficamente equivalentes (cf. Barton et al. 1991). Complexo Báruè – Pinna et al. (1987) distingüíram várias unidades lito-estratigráficas no Complexo Báruè (Secção 7.7), que não podem ser identificados como entidades separadas nas imagens de satélite e mapas geofísicos. Como conseqüência, estas sub-unidades não foram mantidas. O Complexo Báruè, redefinido e reduzido, tem sido subdividido em Grupos Macossa e Chimoio, largamente expostos entre ~17°30’ e 20° S. As margens leste e sul do complexo Báruè são formados por formações do Karoo e coberturas mais jovens, limitadas por falhas ou inconformidades. A margem oeste é uma considerável zona de cisalhamento dextrógiro, que ocorre ao longo da margem leste exposta do cráton Arcaico (Capítulo 10). Ao norte, o Complexo termina supostamente em uma frente de empurrão direccionada ao norte. Apesar de ambas unidades possuírem similaridades litológicas e estructurais, o Grupo Macossa mostra uma predominância mais clara de rochas de derivação supracrustal. As litologias do Complexo Báruè desenvolvem tipicamente uma paisagem ondulada, fracamente dissecada, com Inselbergs formados por rochas intrusivas. Nas fotografias aéreas e mapas aerogeofísicos, o Complexo é caracterizado por uma foliação com tendência concêntrica, que aparentemente forma uma série de estructuras do tipo cogumelo, manifestando padrões de dobras de interferência (vide Figs. 2.9. e 2.10). O padrão de dobramento sugere um significativo fluxo dúctil em níveis crustais médios (a rasos?), o que é confirmado pelo metamorfismo dinamo-termal de alto grau, como é manifestado por uma variedade de gneisses, migmatitos e granitóides de grau médio a alto, com intercalações Volume 2 Page 31 subordinadas de rochas máficas, quartzitos, mármores e rochas calco-silicatados associados. Os protólitos sedimentares destas litologias correspondem mais provavelmente à uma seqüência turbidítica monótona, depositada sobre uma margem continental passiva e empurrados sobre a margem do Cráton Zimbabwe durante o Ciclo Orogênico Grenvilleano (~1.1 – 1.0 Ga). Na presente Nota Explicativa do Mapa (Volume 1), o Complexo Báruè foi subdividido em oito formações regionais informalmente definidos, nas quais cerca de 12 variedades de rochas ígneas foram emplaçados. O presente estado da compreensão não permite o agrupamento destas unidades de acordo com a posição destas na coluna estratigráfica. O Grupo Macossa compreende as seguintes unidades mapeáveis: Gneisse Leucocrático (P2BMlc), Gneisse Quartzo-Feldspático (P2BMqf), Meta-arcósio (P2BMar), Quartzito Feldspático (P2BMfq), Granada-Silimanita Gneisse, Mica Gneisse e Metagrauvaca (P2BMsi), Mármore (P2BMma) e Gneisse Calco-Silicatado (P2BMcc). O Grupo Chimoio é composto por Metasedimento Siliciclástico (P2BCss), Gneisse Monte Chissui, Biotita Gneisse Félsico e Metagranito (P2BCfg), Paragneisse Migmatítico (P2BCmi), Metagranito a Granada e Paragneisse (P2BCmg), Hornblenda Gneisse e Amfibolito (P2BChg) e Mica Xisto e Mica Gneisse (P2BCch). Corpos variavelmente deformados de rochas plutônicas félsicas e máficas, incluindo uma variedade de ortogneisses de afinidade granítica e tonalítica, meta-diorito, meta-gabro e hornblendito, intrudiram os metasedimentos do Complexo Báruè. O Consórcio GTK datou três amostras de ortogneisses pertencentes ao complexo Báruè (Secção 7.7.7). O metagranito intrusivo nos metasedimentos siliciclásticos (P2BCss) forneceu a idade magmática SHRIMP de 1119±21 Ma. Zircões herdados desta amostra tem idades de ~1.83 Ga, 2.03 Ga e 2.50 Ga. Ortogneisses granodioríticos, emplaçados nos paragneisses do Grupo Chimoio, definem a idade magmática SHRIMP de 1079±7 Ma. A idade TIMS de monazita de ~ 530-510 Ma da mesma rocha manifesta claramente a sobre-impressão Pan-Africana. O metatonalitodo Monte Chissui fornece idades aparentes de interceptação da concórdia de ~1300 e 600 Ma. A idade superior de interceptação de 1.30 Ga é relativamente alta e estranha na população das rochas Moçambicanas. A idade de interceptação inferior indica provavelmente os efeitos do metamorfismo Pan-Africano, que pode ter causado a migração das taxas Pb/U do zircão à esquerda da tendência original de perda de chumbo. Assim, é possível também que a idade 1.3 Ga seja meramente a idade máxima do meta-tonalito. A idade 207Pb/206Pb mais alta de ~ 1150 Ma pode ser assim, a idade mínima desta rocha. Alternativamente, esta idade de 1.3 Ga pode reflectir a extensão pré-cinemática Kibariana. Unidades miscelâneas previamente atribuídas ao Complexo Báruè – Nos mapas anteriores (Hunting, 1984), o complexo Báruè extende-se de 16° S a 20° S. No presente mapa, a área ocupada pelo Complexo Báruè foi reduzida (Capítulo 7.8.), extendendo-se agora somente até 17°30’ S. O que resta na área ao norte (entre 16° S e 17°30’ S), compreende as rochas sedimentares das Formações Chiduè* e Nhamessolo*, dominadas por mármore, granito Chacocoma e seus derivados tectônicos, assim como granito-migmatito a granada e o gneisse migmatítico a granada. O antigo “Gneisse Chacocoma” sensu Hunting (1984) dos “domos” Mázoè e Chacocoma, em baixo da Suíte Tête, é agora parte do extenso Granito Chacocoma, Mesoproterozóico. O gneisse/migmatito com granada parece estar restricto à zona tectônico arqueada, que é o limite do empurrão setentrional do Complexo Báruè, redefinido no novo mapa. O mesmo limite restringe a distribuição setentrional da Neoproterozóica Suíte Guro, redefinida (abaixo). Isto implica na origem tardia do empurrão mencionado. A posição das formações Chiduè e Nhamessolo é mais problemático. Diferentemente das mármores do Grupo Rushinga, que jazem próximos ao embasamento Arcaico, as Volume 2 Page 32 Formacões Chiduè e Nhamessolo, dominados por mármores, são supostamente mais jovens e dificilmente são vistas como equivalentes laterais deste. Porém, os estudos isotópicos de rochas carbonáticas das Formações Chiduè e Nhamessolo* fornecem valores igualmente anômalas de C δ13 que as rochas carbonáticas do Grupo Rushinga (Tabelas 7.4 e 7.2). Na legenda do mapa, a Formação Nhamessolo, mesmo que descripto aqui junto aos seus vizinhos geográficos, é locado no Grupo Rushinga. Suíte Guro – A Suíte Guro é apresentado nesta Nota Explicativa do Mapa (Volume 2), como uma nova unidade litológica. As rochas da Suíte Guro (e as litologias intercaladas, vide acima) são expostas em uma área de 100 x 100 km, ao norte do redefinido Complexo Báruè, entre Tete e Guro-Mungári (16° e 17°30’ S) e foram anteriormente incorporados no Complexo Báruè, sensu Hunting (1984). A Suíte Bimodal Guro é composto por membros máficos e félsicos. Os teores de SiO2 dos componentes félsicos variam entre 68.1 e 77.6 % e os dos membros máficos, entre 44.7 e 50.6 % (Apêndice 3, Tabela 7.4. anál. 4-27). O membro félsico é denominado de Granito Aplítico Gneisse-Migmatito Serra Banguatere e o membro máfico de Metagabro e Gneisse- Migmatito Máfico Magasso. Estes ocorrem mais comumente juntos, em um arranjo bandado, com a predominância do membro félsico. Esta assembléia bandada é denominada de granito Gneisse-Migmatito com Gneisse Migmatito Máfico Monte Calinga Muci. O Granito Aplítico Gneisse-Migmatito Serra Banguatere (P3Oag) representa o componente félsico puro da suíte bimodal, composta por camadas, cujas espessuras variam de alguns centímetros a mais de cem metros. Aquelas com a espessura adequada, são mostradas no mapa em forma de corpos alongados, reflectindo as suas formas tabulares. O Metagabro e Gneisse-Migmatito Máfico Magasso (P3Ogb) forma o componente máfico da Suíte Bimodal Guro. Este é o componente inferior do complexo de injecão máfico- félsico e ocorre somente de forma ocasional em grandes afloramentos, sem o componente félsico. Somente alguns poucos corpos arredondados mapeáveis, alguns com consideráveis dimensões, foram desenhados no mapa. A unidade maior da Suíte Guro é o Granito Gneisse-Migmatito e Gneisse-Migmatito Máfico Monte Calinga Muci (P3Ogm). Este é a combinação de componentes máficos e félsicos intercamadadas com limites agudos, que ocorrem intimamente lado a lado em camadas, bandas ou lâminas paralelas, tendo, na maioria dos casos, a predominância do membro félsico sobre o componente máfico. A Suíte Guro é considerado representar um sistema ígneo sin-cinemático de multi- injecção. As injecções mais tardias são menos foliadas, com relações de contacto discordantes com a fábrica das anteriores. Os membros félsicos e máficos são aproximadamente contemporâneos, o que é demonstrada por relações de contacto variáveis, mas que são difíceis de serem definidos, devido ao achatamento e estiramento tectônicos desta assembléia bimodal. O Consórcio GTK datou três amostras da Suíte Guro, dos quais, em resumo, três idades podem ser deduzidos: (1) idade magmática de zircão de 867±15 Ma, (2) idade metamórfica de zircão de 850-830 Ma e (3) uma segunda sobre-impressão metamórfica de 512±4 Ma. A idade (1) pode ser atribuída ao emplaçamento magmático da Suíte Guro. A idade (2) pode estar relacionada com falhamento de descolamento extensional (cf. Dirks et al. 1998) e idade (3) à sobre-impressão metamórfica Pan-Africana. Volume 2 Page 33 GONDWANA OESTE – SUÍTE TÊTE A única unidade representativa do Terreno Gondwana Oeste é a Suíte (Gabro- Anortosito) Tête (SGAT). A alóctone SGAT foi supostamente emplaçada magmaticamente no embasamento do Gondwana Oeste, mas subsequentemente transportado para sul à sua posição atual, cobrindo parcialmente a sutura entre os Terrenos Gondwana Sul e Oeste. A maior parte da SGAT ocorre ao norte da latitude 16° e é descripto em maior detalhe na Nota Explicativa do Mapa, Volume 4 (GTK Consortium, 2006d). As rochas básicas e ultrabásicas da SGAT são caracterizadas por baixas assinaturas radiométricas, resultando em cores escuras na imagem radiométrica ternária (Fig. 8.1a). Anomalias locais altas a muito altas de Th-U e U são encontrados em janelas do embasamentoe no próprio SGAT, correspondendo às áreas de alteração hidrotermal e mineralizações associadas na base e soleira da Suíte. Fortes anomalias aeromagnéticas (Fig. 8.1b) provêem uma ferramenta de mapeamento adicional útil e mostram que a suíte ígnea não extende significativamente à profundidade, além da sua presente exposicão. Considerações a partir de vários dados (aeromagnéticos, topografia, estructura, observações de campo) indicam que a suite ígnea forma um lopólito (alóctone), com a espessura que não excede 2 a 3 km nas suas porções mais espessas. A SGAT é predominantemente composta por gabros e leuco-gabros geralmente maciços, de granularidade média a muito grosseira ou até pegmatítica, com anortosito subordinado e tipos de rochas ultramáficas de menor importância, principalmente piroxenito e Fe-Ti-óxidos. Uma grande substituição dos minerais originais, em combinação com a imposição de uma fábrica planar, ocorrem em vários lugares na suíte, sendo, porém, mais comum ao longo do contacto basal com o embasamento cristalino. Estas zonas de contacto são geralmente caracterizadas pelo cisalhamento frágil e dúctil. Nesta Nota Explicativa do Mapa, as litologias da SGAT compreendem Piroxenito (P2Tpx), Anortosito (P2Tan) e Rocha a Óxidos de Fe-Ti (não constando no mapa). COBERTURA FANEROZÓICA A cobertura Fanerozóica em Moçambique compreende sedimentos terrestres e marinhos e rochas (sub-)vulcânicas associadas pós-Pan-Africanas, geralmente (sub-)horizontais. A cobertura Fanerozóica é convenientemente subdividida (da base ao topo) em Supergrupo Karoo e seqüências depositadas contemporaneamente com o desenvolvimento do Sistema de Rifte da África Oriental. O primeiro, depositado durante o Evento Karoo, anuncia a separaçãoabortada do Gondwana. As seqüências do Rifte da África Oriental compreendem uma assembléia vaga de sedimentos e rochas (sub-)vulcânicas associadas, que podem ser relacionadas com o rifteamento, migração e dispersão do Gondwana. O desenvolvimento do Sistema de Rifte da África Oriental (SRAO) foi superposta aos últimos processos geodinâmicos. Supergrupo Karoo – As rochas Karoo de Moçambique ocorrem em várias estructuras do tipo Graben de rifte/margem passiva. Estas incluem (de norte a sul) o Graben Metangula (Província de Niassa), Bacia Rovuma (Província de Cabo Delgado) e o Graben do Meio- Zambezi (Província de Tête). Mais ao sul, rochas vulcânicas básicas e ácidas dos monoclínios de Nuanetsi-Sabi e Lebombo compõem a maior parte da seqüência Karoo. O Graben do Meio-Zambezi é localizado na área da Nota Explicativa do Mapa e consiste de uma seqüência espessa de grés e argilitos com camadas de carvão próximas à sua base. Quantidades significativas de rochas vulcânicas são encontradas no Karoo Superior mas, ao contrário do Volume 2 Page 34 esquema regional, estão ausentes no topo do Karoo. Os centros vulcânicos do Karoo Superior compreendem o domo de Luia. A província vulcânica regional maior da parte mais superior do Karoo (~180 a 190 Ma), presente na Bacia Principal do Karoo na África do Sul, Antárctica e Moçambique nos monoclinios de Canxixe, Nuanetsi-Sabi e Lebombo, é chamado de Suítes Rukore e Gorongoza na área da Nota Explicativa do Mapa. O Grupo Karoo Inferior – A história deposicional do Grupo Karoo Inferior inicia-se com a glaciação da idade correspondente à Dwyka (Carbonífero Superior) e termina com a deposição de depósitos clásticos mixtos de granulação grosseira a fina durante o Permiano. A Formação Vúzi* (CbV) foi depositada em uma ambiente flúvio-glacial durante o Carbonífero Superior. Esta aparece restricta às depressões mais baixas da paisagem pré-Karoo e consequentemente é exposto somente em poucas localidades (SDS 1634). As litologias mais expressivas compreendem conglomerados fluviais, grés feldspáticos, lamitos carbonosos, siltitos e camadas com carvão. Os afloramentos da Formação Moatize* (PeM) são encontrados ao longo do banco norte do Rio Zambezi, em três sub-bacias carboníferas, i.e. bacias Chicôa-Mecúcoè, Sanângoè-Mefidéze e Moatize-Minjova. Na última, a Formação Moatize* é bem exposta no Vale do Rio Moatize (SDS 1633), onde esta alcança a espessura de 340 m e consiste, em sua maior parte, de grés carbonosos com seis camadas diferentes de carvão. Outras sub-bacias com carvão serão discutidas na Nota Explicativa do Mapa, Volume 4 (GTK Consortium, 2006d). A unidade compreende arcóseos brancos a cinzas, grés conglomeráticos ocasionais, grés de grão fino com argila ou micáceo (com flora fóssil) e argilitos negros com camadas de carvão, subordinados (Fig. 9.1). Sobre a Formação Moatize*, carbonífera, depositou-se a Formação Matinde* (PeT, PeTc) que compreende uma espessa successão intercalada de grés muito grosseiros e conglomerados polimíticos, encontrado na parte norte da área da Nota Explicativa do Mapa (SDS 1632-1634; e.g., na Folha Chioco, ao norte do contacto tectônico entre o Fanerozóico e os terrenos Proterozóicos). Grés grosseiros ou conglomeráticos similares afloram também sob derrames de lavas basálticas no núcleo do domo vulcânico da Serra Mavunge. Os sedimentos da Formação Matinde* na área de Birira (SDS 1633), são predominantemente compostos por gré e subordinadamente por siltito de cor creme e conglomerado, que alternam com riolitos e basaltos das formações sobrejacentes do Karoo Superior. Grés macio, alterado, com lâminas finas de cor creme são expostos em um tributário do Rio Mavúzi (Fig. 9.2). Grés grosso e muito grosso, com algumas camadas conglomeráticas, ocorrem na mesma localidade (Fig. 9.3). A idade Permiana Inferior a Média é assumida à Formação Matinde*, equivalente à Ecca Média/Superior da Bacia Principal do Karoo na África do Sul. O Grupo Karoo Superior – O Grupo Karoo Superior compreende uma série de successões terrestres, juntamente com rochas (sub-)vulcânicas inter-estratificadas ou intrusivas de idade Triássica Inferior a Jurássica Inferior, incluindo as Suítes Rukore e Gorongosa, bimodais, agora datadas de 180-190 Ma. As observações de campo destas foram efectuadas principalmente nas áreas de Massangano, Brira e Canal de Lupata (SDS 1633) e do domo da Serra Mevunge3 (SDS 1631-1632). A Formação Cádzi* (PeC) é exposta na forma de uma faixa arqueada, cercando a ponta norte do Canal de Lupata (SDS 1633-1634), compreendendo grés arcóseos de granularidade média a grosseira (Fig. 9.4), calcáreo e grés carbonáticos. Camadas similares de gré mineralogicamente imaturo afloram também mais ao sul, ao longo do contacto tectônico com 3 A estructura vulcânica dômica do Karoo Superior, localizada nas Folhas de Mecumbura e Chioco (SDS 1631/1632) foi denominada de Domo de Luia por Hunting (1984), mas renomeado por Consórcio GTK como a Serra Mevunge, baseado na parte mais alta do domo (966 m), Volume 2 Page 35 o terreno Proterozóico adjacente (Fig. 9.5a,b). Em certos locais, horizontes conglomeráticos com clastos angulosos a bem arredondados, ocorrem com estes grés (Fig. 9.6). Troncos de árvores petrificados foram encontrados na região de Doa. A Formação Cádzi* tem sido geralmente considerado como tendo a idade Permiana Superior a Triássica Inferior. A Formação Rio Nhavúdezi* (JrRN) compreende uma successão de basaltos, encontrados ao longo do Canal de Lupata, mas formando uma maior unidade litológica a sul do povoado de Nhamatanda (SDS 1934), onde esta continua como a faixa Canxixe, Nuannetsi-Sabi, com uma largura variando de 5 a 20 km, por mais de 250 km a SW da fronteira com Zimbabwe (Nota Explicativa do Mapa, Volume 1; GTK Consortium, 2006a). O contacto da soleira é exposta em um tributário do Rio Mebahata (SDS 1734), onde a lava basáltica brechada de um derrame sobrejaz uma variedade conglomerática da Formação Chueza* (Fig. 9.7). O contacto superior com as rochas riolíticas da Formação Serra Bombuè é gradacional, começando na parte superior da Formação Rio Nhavúdezi com finas camadas de riolito, intercaladas com lavas basálticas (Fig. 9.8). Os basaltos Rio Nhavúdezi formam rochas de cor cinza escura a verde acastanhada, de textura fina, amidaloidal e geralmente afíricas. As variedades porfiríticas com fenocristais de plagioclásio ocorrem localmente. As amígdalas preenchidas por calcedônia e zeolitas são comuns na parte superior dos fluxos de lava. Alguns dos fluxos de lava exibem disjuncções colunares bem desenvolvidas (Fig. 9.9). Textralmente, os basaltos de grão fino são rochas sub-ofíticas, contendo plagioclásio, clinopiroxênio e olivina como minerais predominantes. Biotita e clorita secundárias são os accessórios mais comuns. Do ponto de vista lito- geoquímico, as lavas do Rio Nhavúdezi são toleítos subalcalinos. Os riolitos da Formação Serra Bombuè* (JrSb) formam uma crista de direcção norte, com menos de 4 km de largura e mais de 30 km de comprimento, suavemente inclinada (12- 20°) a leste a W do Canal de Lupata, NW da montanha de Gorongosa (SDS 1734), espremida entre as lavas basálticas das Formações Rio Nhavúdezi* e Chueza*. O contacto com a Formação Rio Nhavúdezi* é gradacional (Fig. 9.10). O riolito Serra Bombuè é uma rocha de textura fina, cor chocolate e bastante maciço, indicando derrames bastante espessos e resfriamento lento. Localmente pode se observar um bandamento de fluxo. Variedades brechadas, com fragmentos de contornos bem definidos e texturas esferulíticas, ocorrem na parte basal da successão riolítica. A Formação Rio Mazoe* (JrIa, JrIb) é bem definida nas Folhas de Chioco (SDS 1632) e Tête (SDS 1633), onde as lavas basálticas e andesíticas da Formação Rio Mazoe* jazem sobre grés da Formação Matinde* do Karoo Inferior, sendo, por sua vez, cobertos por riolitosda Formação Bangomateta*. Os afloramentos a oeste da ponte do Rio Mazoe e nas partes centrais do domo da Serra Mevunge compreendem lavas basálticas intemperizadas de forma variegada, muitas vezes dificultando a identificação apropriada das rochas. Consequentemente, dados radiométricos foram utlizados para separar os basaltos das variedades mais félsicas na seqüência vulcânica. O basalto de grão fino forma uma pilha de derrames com inclinação suave (12-20°) a SWW, encontrada nos bancos dos rios (Fig. 9.11). Contactos ricos em vesículas definem espessuras de derrames individuais, variando de 2 m a 15 m na parte basal da pilha. Muitas das características típicas dos basaltos do tipo flood tem sido observados, como zonas basais de vesículas alongadas do tipo pipe, cilindros vesiculares verticais e disjuncção colunar nos núcleos de derrame e estructuras de lavas cordadas (pahoehoe) nas superfícies de derrame (Fig. 9.12). A ausência de material sedimentar ou piroclástico entre os derrames de lava confima a intensidade e taxa de erupção altas, o que também é típico de províncias continentais de basaltos do tipo flood. As vesículas contém calcita e zeolita. Orifícios de até 20-30 cm de tamanho apresentam frequentemente lineações brilhantes de crisocola de cor azul-verde. Volume 2 Page 36 Derrames vulcânicos similares, mas menos espessos, ocorrem na área do domo da Serra Mevunge, onde jazem sobre os grés do Karoo Inferior, sendo cobertos por fluxos riolíticos da Formação Bangomateta*. Orifícios preenchidas por zeolita e calcita, encontrados na parte superior do derrame, excedem localmente 30-40 cm em tamanho (Fig. 9.13). Lavas basálticas, expostas a 3 km a leste do povoado de Changara, formam uma região montanhosa, que se extende por uma superfície de 10 x 10 km. Concentrações de geodos de quartzo são encontrados em alguns lugares, marcando partes superiores de derrames de lava. Na área de Birira (SDS 1633), as camadas de basalto podem alternar-se com derrames riolíticos (Fig. 9.14). Derrames riolíticos mais espessos a sul de Birira compõem colinas proeminentes e são intercalados com derrames basálticos. Derrames riolíticos igualmente extensos e espessos capeiam derrames basálticos da Formação Rio Mazoe* na estructura dômica da Serra Mevunge (SDS 1632) e a E da confluência dos rios Luia e Mazoe (SDS 1633), extendendo-se por mais de 80 km a NW e formando o taboleiro da Montanha Bangomateta. A idade K-Ar antiga de 166±10 Ma (Flores, 1964) foi invalidada, em vista dos resultados geocronológicos recentes, que sugerem uma idade Jurássica Inferior (180-190 Ma). Na área do Rio Mazoe, a Formação Bangomateta* (JrBr, JrBb) compreende uma pilha de derrames riolíticos que mergulham suavemente (10-35°) a SW. Os piroclásticos predominam ao longo dos Rios Mazoe e Luia. Uma seqüência heterogênea de riolitos mostra feições típicas de tufos soldados de fluxos de cinzas ou ignimbritos nas proximidades do Monte Inhamangombe (Figs. 9.15A-D). Os lapíli-tufos e brechas piroclásticas, geralmente mal seleccionados e maciços, compreendem fragmentos de contornos bem definidos (tufos soldados, Fig. 9.15A) ou fragmentos de púmice vesicular em vários graus de soldagem (Fig. 9.15B). O bandamento de fluxo (Fig. 9.15C) e litófises associados, preenchidos por quartzo e zeolita (Fig. 9.15D), são também manifestações da soldagem de depósitos piroclásticos. Tufitos de grão fino, maciços a laminados, são encontrados localmente nas áreas mais distais ao Monte Inhamangombe. Estes provavelmente representam as fácies não-soldadas, mais distais de tufos de fluxos de cinzas ou depósitos de queda de cinzas ácidas. Uma ponta ou lobo de lava riolítica bem preservada é exposta no desfiladeiro do Rio Mazoe, a aproximadamente 10 km a E do Monte Inhamangombe. Este fluxo é rico em pequenas vesículas deformadas, fenocristais orientados de feldspato (traquíticos) e bandamento de fluxo distincto. Vários orifícios largos (até 4 x 8 m em diâmetro) presentes nos fluxos, representam possivelmente um alinhamento de chaminés vulcânicos (Fig. 9.16). O Monte Inhamangombe forma uma estructura circular com ~seis km de diâmetro, em parte com proeminentes escarpas, próxima à confluência dos Rios Mazoe e Luia. As rochas riolíticas da área compreendem principalmente vários tipos de depósitos piroclásticos, incluindo brechas pumíceas, aglomerados e tufos diversamente soldados de fluxos de cinza, ricos em litófises preenchidos por quartzo (Fig. 9.17). A sua configuração como uma caldeira é sugerida pela presença de uma brecha grosseira e caótica, compreendendo grandes fragmentos (até 2 m de diâmetro) angulares a sub-arredondados de lava e tufo, encontrada na borda SSE da estructura vulcânica (Fig. 9.18). Esta brecha, que aparece ter dezenas de metros de espessura total, representa provavelmente a brecha de tálus de um sistema de falha sin-vulcânica que circunda o reservatório de magma (caldeira). A interpretaço de imagens de satélite e a abundância de potássio nos dados radiométricos manifesta a presença de riolitos Bangomateta na área do domo da Serra Mevunge (SDS 1632). Na parte norte do domo, a successão vulcânica mergulha 10-12° a NE, devido ao basculamento local e forma uma pilha de derrames em forma similar a terraços. A larga extensão e a forma tabular destes infere uma única unidade de resfriamento de tufos de fluxo de cinzas. A sete quilômetros a SEE do Monte Chimandau, os bancos dos rios e o toposolo altamente intemperizado do riolito vesicular, similar a uma lava esponjosa (Fig. 9.19), é rico em geodos esféricos de ágata. Estes nódulos estratificados de calcedônia, Volume 2 Page 37 originalmente desenvolvidos como cavidades de gás (litófises) em um tufo soldado (Ross & Smith 1961), são comumente conhecidos como “ovos do trovão” (thunder eggs) e confirmam a natureza piroclástica das rochas riolíticas. Porém, na parte central do domo da Serra Mevunge, as estructuras de riolitos (e.g. bandamento de fluxo), indicam que também houve extrusão de derrames de lava. Derrames riolíticos contendo bandamento de fluxo e dobramento superficial típica de lava viscosa também ocorrem (Fig. 9.20) a ~cinco km a NE do Monte Balati. Na mesma área, a lava riolítica contém pequenos fragmentos (<5 cm) de grafita, derivados provavelmente de sedimentos com carvão do Karoo Inferior, subjacente. Riolitos porfiríticos, contendo pequenos fenocristais de feldspato e quartzo (<5 mm) imersos em uma matriz de textura fina, são encontrados em certos lugares. Os mergulhos abruptos a verticais locais do bandamento de fluxo do riolito sugerem proximidade com condutos vulcânicos. Um derrame de obsidiana, com mais de três metros de espessura, é exposta por alguns centenas de metros a aproximadamente 10 km do Monte Sluxia. Esta rocha maciça tem cor cinza desembotada em superfícies alteradas, enquanto nas superfícies de fractura conchoidais mostra-se preto vítreo, com um brilho lustroso (Fig. 9.12). As análises químicas do derrame de obsidiana são idênticas ao derrame de lava riolítica da área do Rio Mazoe. Derrames de riolito de textura fina, cor-de-rosa a avermelhados e amigdaloidais ocorrem a 7 km a norte do povoado de Birira (SDS 1633). As amígdalas estão preenchidas geralmente por calcita e localmente por zeolita. Aglomerados riolíticos são também encontrados. Horizontes bem bandados de cor cinza de calcedônia e piroclásticos, com mergulhos de 15-20° a SW, são encontrados Em outros locais, estas rochas vulcânicas são cortadas por veios de calcita, com espessuras de até 10 cm. Idade Jurássica Média é tradicionalmente atribuída à Formação Bangomateta*. Porém, visto os dados geocronológicos mais recentes, a idade Jurássica Inferior é mais provável. Os derrames basálticos da Formação Chueza* (JrC) estão ininterruptamente expostos entre os povoados de Sinjal e Chueza, na parte nordeste do Canal de Lupata (SDS 1634)(Fig. 9.23), onde estes repousam directamente sobre os basaltos da Formação RioMazoe*. Basaltos similares são também encontrados na região de Massangano (SDS 1633). Geodos de até 30 cm de diâmetro possuem finos cristais de calcita com até 10 cm de comprimento no Monte Cinzeiros. Basaltos similares são também encontrados ao longo da escarpa do Monte Linhanga e no Monte Cuadezo. Ao longo do declive oeste da Canal de Lupata uma excelente secção de basaltos Cueza podem ser vistas, próxima ao povoado de Búzua (SDS 1734), onde uma pilha de derrames de lava subhorizontais aflora completo no desfiladeiro do Rio Pompue. Derrames com até 5 m de espessura mostram padrões de juntas de resfriamento regulares, topos com pequenas amígdalas arredondadas e bases com tubos de amígdalas alongadas, com até 15 cm de comprimento, demonstrando a direcção de fluxo a noroeste (Fig. 9.24A e 9.24B). Nos derrames basálticos encontra-se localmente estructuras arredondadas, similares a pequenos pães, que provavelmente representam secções verticais de pontas de línguas de derrames de lava (Fig. 9.24C). Um túnel colapsado de lava com aproximadamente um metro de diâmetro, foi encontrado em um desfiladeiro de um rio. Um contacto tectônico milonitizado entre os basaltos Chueza e gneisses Mesoproterozóicos, com um mergulho abrupto a leste (60°), é exposta no banco sul do Rio Pompue, a ca. cinco km do povoado de Búzue (Fig. 9.25). A idade dos basaltos da Formação Chueza* tem sido tradicionalmente comparado com os flood basaltos Drakenberg (~180 Ma). Visto os dados geocronológicos novos, uma idade mais antiga deve ser assumida à esta. Suíte Rukore – A Suíte Intrusiva Rukore forma a cadeia de montanhas de Rukore, que é topograficamente contígua com a área granítica montanhosa do Rukore, com ~20 km2 em área no território de Moçambique (parte sudoeste da Folha de Chioco, SDS 1632). A relação Volume 2 Page 38 espacial íntima com o (micro)granito Rukore e dolerito, as similaridades composicionais e texturais e as relações intrusivas variáveis dos diques doleríticos e microgranito indicam um emplaçamento aproximadamente contemporâneo dos componentes máficos e félsicos. Pequenas intrusões, plugs e diques da Suíte Rukore (JrR, JrR, JrRf) são abundantes no embasamento e estratos vulcano-sedimentares do Karoo, onde estes intrudiram forçadamente ou foram emplaçados ao longo das zonas de fraqueza Mesozóicas e pré-Mesozóicas reactivadas. As intrusões félsicas da Suíte compreendem o microgranito (e.g. Granito Rukore), pórfiro (e.g. Pórfiro Bungue), riolito, tufo félsico e plugs de composição dacítica. Alguns raros componentes félsicos possuem composição nefelino-sienítico ou fonolítico. Enclaves máficos magmáticos, com xenocristais de feldspato alcalino, não são incomuns (Fig. 9.28). As texturas micrográficas e granofíricas freqüentes do granito Rukore indicam a sua origem sub-vulcânica, hipabissal. Os diques quartzo-feldspato pórfiros da Suíte Rukore formam cristas proeminentes, do tipo bloco, na área do Rio Mazoe, onde estes estão invariavelmente associados e ocasionalmente cortados por diques doleríticos. Os diques quartzo-feldspáticos, com uma direção geral NW, ocorrem em zonas de enxames, medindo até 30-50 m de largura e vários quilômetros de comprimento. Estes diques maciços de vermelho-tijolo, são geralmente distinctamente porfiríticos, com fenocristais arredondados de quartzo e de feldspato zonados com até 30-40 mm de tamanho, “fluctuando” na matriz quartzo-feldspática microcristalina (Fig. 9.29). Intrusivas máficas da Suíte Bimodal Rukore incluem diques com composições micro-gabróicas ou basálticas. Os stocks de (micro)gabro de textura fina a média foram emplaçados nos grés do Karoo na área de Massangano, no banco direito do Rio Zambezi. A datação Sm-Nd, efectuada por Consórcio GTK, forneceu a idade de 195-180 Ma para o microgranito Rukore (Mänttäri, 2005b). Suíte Intrusiva Gorongosa - A Suíte Intrusiva Gorongosa, que mede 30 km a N-S e 25 km a E-W, consiste de um núcelo félsico, circundado por rochas ígneas máficas, que juntos formam o proeminente marco geomorfológico da Serra de Gorongosa (1862 m), situado no limite entre SDS 1833 e SDS 1834. As litologias do seu núcelo compreendem Micropegmatito- granito e sienito (JrGg), composto por albita, ortoclásio, quartzo, clinopiroxênio e hornblenda (Fig. 9.30), que intrudiu uma intrusão máfica mais antiga, composta por gabro toleítico (Fig. 9.31), Norita e olivina gabro (JrGb), que, por sua vez, intrudiu litologias circundantes do Grupo Macossa do Complexo Báruè. A Suíte Intrusiva Gorongosa é associada com um enxame de diques félsicos e máficos de direcção NNE-SSW, que radiam a norte e sul da intrusão. A datação TIMS de duas fracções de zircão do sienito, efectuada por Consórcio GTK, forneceu idades concordantes e idênticas de 181±Ma, contemporâneas com a Suíte Rukore. Seqüências do Rifte da África Oriental – O Supergrupo Karoo, manifestando a fase de rifteamento abortado, é seguido por um período de rifte continental, migração e dispersão do Gondwana. Esta fase é contemporânea com o desenvolvimento do Sistema de Rifte da África Oriental (SRAO), qujo desenvolvimento iniciou no Cretáceo, mas foi accelerado durante o Terciário. A separação continental continua até hoje, como demonstrada pela recorrente actividade tectônica ao longo da SRAO. Nas partes central e sul de Moçambique, este processo deu o início ao surgimento do rifte Luia de direcção NW-SE e ao Graben da Baixa Zambezi, ambos superpostos no Graben Karoo do Médio Zambezi, de direcção E-W. A Bacia Moçambique também se iniciou como uma complexa estructura rifte, com estructuras Horst e Graben de segunda ordem, mas desenvolvidas em uma margem passiva, embasada por rochas vulcânicas do Karoo Tardio de idade Jurássica Inferior e cobertos por successões sedimentares do Cretáceo Médio e mais jovens, porém, com um hiato de ~40 Ma entre estes. Volume 2 Page 39 Estas successões incluem uma série de seqüências de plataforma rasa e de águas mais profundas, restrictas a várias estructuras de rifte estreitas e rochas (sub-)vulcânicas subordinadas (para detalhes, vide a Nota Explicativa do Mapa, GTK Consortium 2006a). Seis maiores seqüências desposicionais podem ser reconhecidas e incorporadas no esquema estratigráfico para toda bacia (costa dentro e costa fora)(cf. Coster et al. 1989): ● Seqüência 1: Deposição Jurássica Superior(?)-Cretácea Inferior do Grupo Lupata e o emplaçamento contemporâneo de rochas vulcânicas da Província Alcalina de Chilwa com inconformidades Neocomianos (Berriasiano até Barremiano) e Aptianos. ● Seqüência 2: Deposição Cretácea Superior da Formação Sena* e inconformidade intra-Senoniano a nível de toda bacia. ● Seqüência 3: Deposição Cretácea Superior (Campaniano-Maastrichtiano) a Paleoceno da parte basal da Formação Grudja*, separada da parte superior das formações Grudja* e Mágoè* por uma inconformidade Paleocênica Inferior. ● Seqüência 4: Deposição Eocênica da Formação Cheringoma* por cima da inconfomidade do Eoceno Inferior e em baixo das inconformidades intra-e tardi-Oligocênicas. ● Seqüência 5: Deposição Oligocênica-Pleistocênica das formações Inhaminga e Mazamba*, productos da erosão e redeposição em outros lugares. ● Seqüência 6: Depósitos Quaternários subdivididos em depósitos Pleistocênicos, como Terraços Fluviais e Depósitos Coluviais e Depósitos Holocênicos, como depósitos de composição areno-argilosa e lamosa, dunas costeiras e depósitos aluviais. Estas seqüências são separadas de uns dos outros por inconformidades angulares e períodos de não-deposição ou erosão devido aos ciclos transgressão-regressão, resultantes da interacção entre episódicas fluctuações eustáticas do nível do mar, subsidência da bacia e soerguimento continental. Seqüência 1: Jurássico Superior(?) – Cretáceo Inferior - O Grupo sedimentar Lupata e rochas vulcânicas alcalinas associadas do Canal de Lupata do Rio Zambezi, atribuídas à Província Alcalina Chilwa (Bloomfield, 1968),representa uma nova fase de rifteamento a ~140 Ma, após 40 Ma de estabilidade. A espessura das successões do Lupata variam. De acordo com Flores (1964), a unidade superior tem cerca de 150 m de espessura nas proximidades do Canal de Lupata, aumentando até cerca de 200 m ao norte do Monte Dómuè. Nesta região a “Formação Superior Lupata” repousa inconformavelmente no topo da Formação Uçúpè* (Grés). No banco direito do Rio Lupata e próximo às ruínas da estação ferroviária Chueza, a unidade está em paraconformidade com os basaltos Chueza, sobrejacentes. O Consórcio GTK redefiniu o Grupo Lupata de acordo com a nomenclatura internacional. Os nomes informais das formações são (da base para o topo): Formação Grés Basal Tchazica*, seguido por Riolito Monte Palamuli e a contemporânea Formação Grés Monte Mazambulo*, coberta pela Formação Fonolito Linhanga*. Os grés basais da Formação Tchazica* (JrLT) estão expostas ao longo da margem oeste do Canal de Lupata e são constituídas por camadas feldspáticas de grés de camadas grossas e de cor marrom claro, intercamadadas com horiontes conglomeráticas (Fig. 9.32). Os clastos são derivados do subjacente Karoo e do embasamento cristalino. Grés de textura média a grosseira, esbranquiçados a cinzentos, com finos horizontes avermelhados de 4-5 centímetros de espessura ocorrem na mesma região (Fig. 9.33). A unidade apresenta uma espessura máxima de 105 m. As rochas sedimentares da Formação Tchazica foram datadas como de Lias (Jurássica Inferior) por Real (1966). Em vista da idade das rochas vulcânicas associadas, a idade Cretácea Inferior é mais provável. Volume 2 Page 40 A Formação Monte Palamuli (JrLP) é nomeada conforme o Monte Palamuli (524 m), localizado a N do Rio Zambezi, na região da Doa. A unidade continua mais a SE, onde riolitos formam uma cadeia de montanhas com 50 km de comprimento, paralela à fronteira com Malawi, entre o Monte Mfpumba e Monte Chombamuani, a cerca de seis quilômetros do povoamento de Sinial. Esta pilha de riolitos tem espessura de cerca de 60 a 120 m, culminando localmente a ~180 m. O contacto superior é geralmente com fonolitos sobrejacentes da Formação Monte Linhanga*, porém, em outros locais, estes são separados de uns dos outros por clásticos da Formação Mazambulo, que é contemporânea. Os riolitos da Formação Monte Palamuli* repousam sobre os grés da Formação Tchazica* ou rochas vulcânicas ou sedimentares pertencentes ao Supergrupo Karoo. A unidade é composta principalmente por riolitos de cor vermelha em terrenos variavelmente accidentados ou formando platôs (Fig. 9.34). Na área de Chueza, o riolito é maciço, amigdaloidal, vesicular e porfirítico, mostrando grandes fenocristais de sanidina esbranquiçados, contrastando com a cor cor-de-rosa escura da matriz vítrea a microcristalina. Outras rochas são brechadas ou tufáceas. Ágatas, com um diâmetro de 10 cm, são encontradas na área em associação com riolitos. Próximo à represa do Rio Sorodeze, um derrame maciço de riolito de cor vermelha é exposta (Fig. 9.35 e 9.36). Horizontes de tufo riolítico, com até 30 cm de espessura, são inter-estratificados com os derrames de lava principais em certos lugares. A Formação Monte Mazambulo* (JrLM) compreende uma seqüência de granodecrescência ascendente de sedimentos clásticos. Grés de cor marrom avermelhado, bem estratificados, de grão médio a grosso a conglomerático, com horizontes de conglomerado polimítico, progradam verticalmente a grés síltico. Localmente tem se encontrado estratificação cruzada de alto ângulo no grés (Fig. 9.37A e 9.37C). A SE do Monte Nhmalongo, gré ou siltito da grão fino, cor vermelho- tijolo, com raízes fósseis, é exposta em baixo de um derrame de lava félsica da Formação Monte Palamuli*, tendo uma espessura de 10-20 m (Fig. 9.37B). Lavas alcalinas da Formação Monte Linhaga (CrLM), exposta em ambos os bancos do Rio Zambezi, é nomeada conforme uma colina proeminente (577 m) ao longo da margem nordeste do polígono com o formato semi-circular. A parte convexa do polígono forma uma escarpa que, em algumas localidades, ascende a ~400 m por cima do terreno circundante. O Canal de Lupata forma aparentemente o centro do vulcanismo alcalino Cretáceo, do mesmo modo que o domo da Serra Mevunge é o núcelo do vulcanismo Karoo. Os traquitos e alcali- basaltos Cretáceos continuam a leste e sul e são intercamadados com a Formação Sena, sobrejacente. A unidade pode ser separada em quatro diferentes derrames, visíveis na forma de patamares pronunciados ao se aproximar do Rio Zambezi. A textura traquítica-porfirítica é característica para estas lavas alcalinas com fenocristais alinhados de feldspato potássico e analcita (Fig. 9.38). Litologias incluem traquito e subordinadamente tufo, basalto e analcita- fonolito. A sua espessura é de aproximadamente 300 m, como pode ser deduzida a partir de dados de sondagem obtidos pela Gulf Oil Company (Flores, 1964). Geofisicamente, os traquitos são difíceis de serem distingüidos das rochas vulcânicas Karoo subjacentes, possuindo, porém, uma assinatura magnética e radiométrica mais uniforme. Os sub-tipos incluem Aglomerado Traquítico (CrLMa), constituído por ejectólitos cimentados, incluindo cristais de analcita, lapíli e bombas vulcânicas (Fig. 9.39B) e afloramentos muito pequenos de Grés, Grés Tufácea e Tufo (CrLMs) que tem sido encontrados no topo do riolito ao longo da margem norte do polígono de Lupata. A partir da sua posição estratigráfica, pode se concluir que as rochas sedimentares-epiclásticas mixtas pertencem à parte basal da Formação Monte Linhanga*. Estes grés são grauvacas feldspáticas, com aproximadamente 25% de matriz de grão fino. Volume 2 Page 41 As rochas vulcânicas do Grupo Lupata tem sido tradicionalmente correlacionadas com o Karoo Superior. Inexistem dados geocronológicos modernos e os dados mais antigos de K40- Ar40 fornecem um amplo leque de idades de ~106 a ~166 Ma (Cretácea Inferior). A idade de 140 Ma é mais apropriada e corresponde com a idade do kimberlito nas fracturas extensionais Riedel nas estructras de rifte marginal do Graben Maniamba (Província de Niassa), datada de 138±9 Ma (Key et al. 2006). Seqüência 2: Cretáceo Médio a Superior – Compreende as Formações Sena e Mágoè*. As rochas sedimentares assinaladas à Formação Sena* (CrS) cobrem o Supergrupo Karoo e Grupo Lupata ou jazem diretamente sobre o embasamento cristalino. Estas rochas ocupam grandes extensões do país, notavelmente na área do Canal de Lupata. As areias e cascalhos Cretáceos formam a planície monótona do interior. Nos mapas aeromagnéticos, estas rochas mostram uma susceptilidade magnética muito baixa. A sua radioactividade natural é moderada, mas um zoneamento distincto pode ser observado na região entre Rios Pompue e Nhamapasa (SDS 1733/34 e SDS 1833/34) e aparece ser relacionado com a proporção de material arenoso versus argiloso. A Formação Sena* é predominantemente composta de gré conglomerático avermelhado, fracamente cimentado, com clastos vulcânicos. A porção basal da unidade compreende camadas impuras de calcáreo, com restos de flora fóssil e argilitos calcáreos com fragmentos de escamas de peixe, artrópodos e flora fóssil. O Consórcio GTK distingue três unidades mapeáveis com o status de membros nesta formação (da base para o topo): (1) o Membro Gré Thorium, (2) o Membro Conglomerado Basal, e (3) o Membro Conglomerado- Gré Superior. Grés arcóseos do Membro Gré Thorium (CrSt), com alta assinatura de tório, formam uma zona com largura de 10-25 km, com direcção norte, que ocorre ao longo do limite Pré- Cambriano-Fanerozóico entre as montanhas Súdeza e Panda (SDS 1634 e 1934), sul do povoado de Nhamatanda). No fundo de algumas perfurações de petróleo profundas da Formação Sena* tem sido encontrados calcáreos impuros e xistos calcáreos com fragmentos de flora fóssil, escamas de peixe e artrópodos. Mais para cima na seqüência sedimentar da Formação Sena*, camadas conglomeráticassão interestratificadas com grés de granulação média a grosseira, tentativamente assinaladas ao Membro Conglomerado Basal (CrSb), com clastos de granito, gneisse, quartzito, fragmentos de feldspato e lavas (Fig. 9.41). A erosão de camadas conglomeráticas deu origem a superfícies de debris de clastos, que frequentemente cobrem os grés da Formação Sena*. A deposição do Membro Conglomerado Basal manifesta um ambiente de alta energia fluvial, incluindo rios entrelaçados e leques aluviais, com conglomerados interdigitados com areias fluviais em uma bacia Cretácea, controlada por falhas. Áreas aleatórias de grés grosseiros e grés conglomeráticos, assinalados ao Membro Conglomerado-Gré Superior, ocorrem no centro e no canto sudeste da Folha de Chemba (SDS 1734), onde formam feições geomorfológicas tabulares, como colinas alongadas e elevadas com a típica, densa floresta. Uma idade Albiana-Turoniana (Cretácea Média) ou Barremiana-Maastrichtiana (Cretácea Médio a Superior) é geralmente atribuída aos depósitos da Formação Sena*. A Formação Mágoè (CrM) é exposta na região Zumbo-Changara e nas planícies e terras baixas a E e W do domo da Serra Mevunge (SDS 1632). É composta por três membros (da base para o topo) (Real 1966): (1) Conglomerado, (2) Gré e (3) Membro Gré-Calcáreo. O Membro (2) grada a e é contemporâneo com partes do gré da Formação Sena* no contíguo Canal de Lupata, na parte leste da Província de Tête. Depósitos clásticos grosseiros, assinalados ao Membro Conglomerado (CrMc) tem sido encontrados em muitos lugares na base da Formação Mágoè*. Um conglomerado polimítico, com clastos bem arredondados de micro-gabro, basalto, riolito, quartzo de veio e rocha quartzosa, possuindo diâmetros entre 10 Volume 2 Page 42 a 40 cm e com a idade correspondente ao Karoo, é exposta no cruzamento entre a estrada Chioco e o Rio Birira e nos bancos do mesmo rio. Em um tributário do Rio Luia, próximo ao declive sul do domo da Serra Mevunge, os blocos arredondados são compostos somente por lavas máficas e félsicas das formações subjacentes do Karoo (Fig. 9.42A). Na zona de falha entre o embasamento e as rochas Fanerozóicas no Rio Nhamafite, fragmentos angulosos a sub-arredondados do conglomerado são predominantemente compostos por pegmatito, granito e vários tipos de xistos ou gneisses, imersos em uma matriz imatura, similar a grauvaca (Fig. 9.42B). O Membro Gré (CrMs) cobre as planícies e terras baixas a E e W do domo da Serra Mevunge (SDS 1631-1632). Devido à sua natureza friável e posição sub-horizontal ou levemente basculada, os grés estão pobremente expostos somente como íngremes bancos erosionais cavadas nos sedimentos por rios grandes (Fig. 9.43). Em geral, os grés Mágoè compreendem grés feldspáticos esbranquiçados ou marrom-avermelhados de granulação fina a média, com horizontes conglomeráticos finos ou raros clastos derivados de rochas vulcânicas máficas e félsicas do Karoo. A estratificação laminar ou paralela é frequentemente bem desenvolvida (Fig. 9.44A). O Calcáreo e gré (CrMl) da Formação Mágoè compreende finos e pobrementre acamadados calcáreos lacustres e subordinadamente, grés pobremente cimentados. Em fotos aéreas, a unidade apresenta um bastante distictiva cor clara, com a característica padrão de drenagem dendrítica. Esta forma áreas desérticas, esparsamente vegetadas, com um solo amarelo, pedregoso, seco e infértil. Seqüência 3: Cretáceo Superior (Campaniano-Maastrictiano) a Paleoceno - A Formação Grudja* (CrG), que ocorre predominantemente na área coberta pelas Folhas 1834 e 1835, sendo composto por gré glauconítico, com lamito calcáreo e grés calcáreo subordinados e de cor amarelo-esverdeados, contendo fósseis de Lopha (Alectronya ungulata) na base, seguido por calcáreo maciço e fossilífero, com até 200 m de espessura. A idade Turoniana-Campaniana (Cretácea Superior) é aceita para a parte inferior desta unidade. A parte superior da seqüência é atribuída à idade Maastrichtiana-Paleocênica. Carbonatitos e rochas alcalinas associadas – Plugs nefeliníticos e fonolíticos, diques alcalinos, doleríticos e granofíricos ocorrem por toda área, particularmente na adjacente Malawi, sendo parte da Província Alcalina de Chilwa. Na área coberta por esta Nota Explicativa do Mapa (Volume 2), condutos ou plugs carbonatíticos são localizados no Morro Lupata, Monte Muambe, Monte Chandava, Monte Salambidua, Monte Buzimuana e vários plugs nefeliníticos e fonolíticos foram emplaçados na Formação Sena*. No Monte Muambe, o carbonatito está em uma estructura anelar, formado por grés, brechas e rochas feldspáticas (fenitos), cortados por traquito e veios sideríticos e manganíferos. Intrusões alcalinas menores na Monte Chandava e Monte Buzimuana são apresentadas apenas como complexos anelares e diques radiantes de solvsbergita e outras rochas alcalinas. O carbonatito do Rio Mufa, redescoberta na área desta Nota Explicativa do Mapa, pertence ao mesmo grupo, assim como as ocorrências da Monte Maunde e Monte Fema (Nota Explicativa do Mapa, Volume 4, GTK Consortium, 2996d). Estes corpos carbonatíticos foram emplaçados na zona de empurrão tectônico em baixo da alóctone Suíte Tete (abaixo). Compexo Carbonatítico Xiluvo, composto por sövita e alvikita, é localizado a ~ 14 km a W do povoado de Nhamatanda (Quadrante NW da Folha de Beira), SDS 1934). Morfologicamente, o Xiluvo é caracterizado por uma série de elevações, formando grosseiramente uma estructura sub-circular, com 4,5 km de diâmetro (Fig. 9.45). O complexo Carbonatítico de Xiluvo é formado por uma estructra anelar na seguinte seqüência: ● Núcleo central constituído de carbonatito a calcita; Volume 2 Page 43 ● Um anel ao redor do núcelo central, constituído por brechas vulcânicas, que podem apresentar fragmentos de rochas carbonatíticas com calcita a cimento ferruginoso e componentes de quartzo, feldspato, xisto, quartzito e rocha básica; e ●Uma zona externa muito complexa ao redor do anel, na qual rochas traquíticas e porfiríticas cortam densamente a rocha quartzo-feldspática encaixante. O emplaçamento de magma carbonatítica foi seguida por uma fase hidrotermal, resultando em diques de quartzo brechados. Contemporaneamente ao emplaçamento carbonatítico, rochas piroclásticas foram projectadas não só ao redor da cratera, mas também mais longe, como pode ser observada em afloramentos de aglomerados até há 10 km da cratera. As rochas carbonatíticas são cobertas por solo avermelhado, apresentando às vezes feições kársticas. O Carbonatito Xiluvo foi emplaçado durante o Cretáceo Inferior e Médio, após à intrusão de pipes e diques de traquitos hiper-alcalinos com augita-aegirina. Uma série de corpos carbonatíticos foi emplaçado na zona de empurrão milonítica, em baixo da soleira da alóctona Suíte Tete. O Carbonatito do Rio Mufa (Crcb) é situado a 30 km a oeste de Tête, próximo à estrada principal a Songo. A ocorrência é situada a SW do domo de Mazoe, cujas margens NE e SE são flanqueadas por carbonatitos próximos de Monte Muande e Monte Fema, respectivamente. A origem carbonatítica destas ocorrëncias é discutida na Nota Explicativa do Mapa, Volume 4, Capítulo 9 (GTK Consortium, 2006d). A camada de carbonatito do Rio Mufa forma uma crista elevada, estreita, de direcção E-W, com declives íngremes (Fig. 9.46A e 9.46B). A camada carbonatítica é espremida entre o gneisse milonito-flaser do Granito Chacocoma e o gabro da Suíte Tete. O declive sul muito íngreme da crista mostra bandamento de fluxo, expresso pelas variações de cor e tamanho de cristal e pela variação no teor de apatita, controlado pelo acamadamento (Figs. 0.46C e 9.46D). Algumas camadas contém abundantes concentrações de magnetita, resistentes ao intemperismo. Seqüência 4: Eoceno – A Formação Cheringoma* (TeC) forma uma faixa contínua ao longo do limite nordeste da depressão Zângue-Urema (SDS 1834), cobrindo áreas extensas a N do Rio Búzi (SDS 1934). Esta unidade, separada por umhiatus Paleocênico-Eocênico dos depósitos Cretáceos subjacentes, é composta por calcáreos glauconíticos e dolomíticos, com grés calcáreos no topo. As fácies deposicionais desta formação, rica em fósseis, correspondem à fácies marinho raso de alta energia na zona fótica, incluindo águas marinhas oxigenadas e tropicais. A idade Eocênica Média a Superior é geralmente aceita à Formação Cheringoma*. Seqüência 5: Oligoceno-Plioceno – Os Grés Terciários da Formação Inhaminga* (Tel) são predominantemente encontrados fora da área da Nota Explicativa do Mapa e somente pequenas, limitadas ocorrências existem na Folha de Beira (SDS 1934). Estes depósitos, separados por um hiatus das formações subjacentes, são compostos por grés argilíticos e grés grosseiros (topo) púrpuras e vermelhas. A idade Miocênica é comumente aceita como sendo a idade da Formação Inhaminga*. Grés arcóseos e horizontes conglomeráticos casuais da Formação Mazamba* (TeZ) jazem sobre os grés púrpuras da Formação Inhaminga* no canto sudeste da área da Nota Explicativa do Mapa (SDS 1834-1934). Estes depósitos compreendem predominantemente grés arcóseos de granulação média a grosseira, de cor amarelo-acastanhado, pobremente cimentados e em certos locais, fracamente silicificados, que mudam a grés brancos a amarelo pálidos na parte superior da seqüência. A fácies iniciais da Formação Mazamba* é litorânea, com raros fósseis, passando a fácies continentais a oeste. As rochas tem idade Pliocênica. Volume 2 Page 44 Os Veios de quartzo brechados formam cristas proeminentes, sinuosas a irregulares, possuindo uma textura brechada, com fragmentos angulosos e irregulares de rochas encaixantes ou quartzo em uma matriz carbonática ou silícica. A “massa silícea pulverizada de falha” (fault gouge) marca frequentemente o limite entre o embasamento cristalino e as rochas Fanerozóicas de cobertura (Fig. 9.47). Estas brechas possuem comumente cavidades e vãos nos quais são às vezes encontrados cristais de quartzo bem desenvolvidas. Os veios de brecha contém também outros minerais, como feldspato alcalino, calcita, fluorita, barita, hematita e, em menor proporção, sulfitos. Acredita-se que estes se formaram durante períodos de tempo longos, através do rejuvenescimento episódico e repetido das falhas do embasamento. Seqüência 6: Quaternário – Os depósitos Quaternários são extensos não só nos vales dos rios maiores, mas também nas depressões estructurais causadas por falhamentos Phanerozóicos em blocos. Areias de Terraços Fluviais (Qt) são largamente expostas ao longo dos rios Mazoe e Luia e nos seus tributários (SDS 1632, SDS 1933). A N do povoado de Nhacolo, no lado norte do Rio Zambezi (SDS 1634), terraços fluviais mostram altitudes locais variando de 20 a 100 m em cima do rio actual. Os terraços superiores são atribuídas á idade Pleistocênica Inferior. Nos bancos íngremes do Rio Mazoe, uma secção de depósitos fluviais consiste predominantemente de areia, mas também de variedades com cascalho, que não são incomuns na base da seqüência (Fig. 9.48). Ao longo do Rio Zambezi, os Depósitos coluviais (Qc) constituem depósitos desagregados, heterogêneos e inconsolidados, ocorrendo em zonas de subsidência tectônica, como por exemplo a Zânguè-Urema (SDS 1834-1934) e ao longo dos rios principais da área da Nota Explicativa do Mapa. O grosso do material pedogênico ou rochoso foi depositado por lavagens efectuadas pelas chuvas e pela lenta solifluxão pelos declives abaixo, assistida pela gravidade e acumulando-se geralmente na base dos declives ou estructuras dômicas em forma de depósitos maciços, não-seleccionados (Fig. 9.49). Durante o Pleistoceno, a erosão normal, actuando sobre unidades de grés Terciários, especialmente aquelas da Formação Mazamba*, causaram a acumulação da Areias Argilosas de Planície Eluvial de Inundação (Qps). Estes depósitos säo encontrados na parte sul e leste da Folha de Beira (SDS 1934). Lamas de Planície de Inundação Eluvial (Qpi) são encontradas em elevações mais baixas no canto sudeste da SDS 1934, cobrindo grandes áreas planas. Estes terrenos argilosos possuem uma permeabilidade muito baixa e formam áreas de freqüentes inundações com lagunas e pântanos. Estes depósitos subjazem os depósitos de areia argilosa de planícies de inundação eluvial. Areias de Dunas Costeiras (Qd) säo encontradas ao longo da zona litorânea da costa Moçambicana, a sul do estuário do Rio Búzi (SDS 1934). Depósitos Aluviais (Qa), compostas por siltes, areias e cascalhos, são distribuídos nas planíceis de inundação dos rios principais, como Luenha e Zambezi, onde bancos de areia proeminentes são frequentemente depositados nos fundos dos rios (Fig. 9.50). Grandes acúmulos de aluviäo ocorrem também em algumas outras regiões, como por exemplo ao longo dos rios Sorodeze e Mazoe. Pequenas ocorrências de Debris de Clastos (Qp) existem em ambos os lados do Rio Revue (SDS 1934), cobrindo os grés Cretáceos da Sena. Estes depósitos, formando elevações do tipo terraço e cristas com até 30 a 40 m de altura, são predominantemente compostos por clastos arredondados de cascalho de quartzo, quartzito e basalto com até 20 a 30 cm de tamanho. Porém, estes horizontes de debris de clastos não são depósitos, mas sim, gerados por processos de formação de solo. Volume 2 Page 45 ESTRUCTURA E METAMORFISMO O Cráton Zimbabwe tem idades de cristalização entre ~3.55 e 2.54 Ga e é predominantemente composto por terrenos granito-greenstone e de gneisses Arcaicos ao longo das suas margens norte e sul (Fig. 6.1). A acresção crustal episódica é manifestada pela deposição de várias gerações de supracrustais de baixo grau nas chamadas “faixas de rochas verdes”, cada uma associada com o emplaçamento de uma suíte TTG contemporânea ou pouco mais jovem (Tabela 6.1). O terreno de gneisse Arcaico ao norte compreende o Terreno Gneisse Migmatítico, composto por orto- e para-gneisses de grau amfibolítico, com relictos de rochas de fácies granulítico. A margem norte do Cráton Zimbabwe é parte da Faixa Zambezi, Pan-Africana, o segmento leste da faixa orogênica transcontinental Damara-Lufiliana-Zambezi (515-560 Ma), separando o Cráton Congo do Cráton Kalahari. A faixa é composta por crosta mais antiga retrabalhada, pertencente a vários terrenos e ao material magmático juvenil de menor proporção. As massas de empurrões, vergentes a sul, foram agrupadas em Terreno Alóctone Zambezi e Terreno Gneisse Marginal (Secção 7.1). Dois períodos tectono-metamórficos tem sido reconhecidos nas unidades tectônicas da Chewore Inliers (Goscombe et al. 1994, 1998; Johnson & Oliver 1998, 2000, 2002, 2004). M1 ocorreu sob condições de fácies granulito de alta temperatura-baixa pressão (>800° C, < 4,4 kbar; Gosgombe et al. 1994) a 1068±21 Ma. A recristalização subsequente ocorreu em condições de estilo colisional de granada-amfibolito de alta pressão-temperatura média (> 13 kbar, 600-700° C) a 526±17 Ma. A margem leste do Cráton Zimbabwe é parte da Faixa Moçambique e é composto por massas de empurrão com a separação embasamento/cobertura (thin-skinned) e lascas, vergentes a oeste e envolvendo fragmentos de rochas Arcaicas e Proterozóicas do Cráton Zimbabwe (Fig. 10.1). O último compreende os grupos para-autóctones Gairezi e Rushinga e o alóctone Complexo Báruè, supostamente derivado da Antártica durante o Ciclo Orogênico Grenvilleano a ~1100 Ma e contendo quantidades significativas de material magmático juvenil. Este evento dinamo-termal D1 deu origem à foliação gnéissica e migmatítica S1, que geralmente tem um mergulho suave a leste, desenvolvida sob condições metamórficas M1 de amfibolito superior. Em muitas das lascas da margem cratônica, a S1 dos planos de cisalhamento é paralelo aos limites das massas tectônicas, enquanto em outras exposições, esta é superposta às estructuras planares Arcaicas mais antigas. O Ciclo Orogênico Pan-Africano é expressa pela compressão N-S ao longo da zona colisionalsetentrional e pelo desenvolvimento de uma zona de cisalhamento sinistral de direcção N-S ao longo da margem leste do Cráton exposto. A compressão N-S causou o desenvolvimento de estructuras dobradas F2 de direcção E-W e, onde superposta às dobras F1 de grande escala, estructuras de interferência F1/F2 do tipo cogumelo, visíveis nas imagesn de satélite (Fig. 2.9). As condições metamórficas M2 alcançaram novamente condições amfibolíticas, causando a remobilização de vários tipos de rochas e abundante emplaçamento de pegmatitos. O cisalhamento sinistral D2 deu origem à foliação vertical S2 e bandamento migmatítico. Os resultados do evento de cisalhamento sinistral de direcção N-S pode ser bem vista em um afloramento a sul de Catandica, a ca. 11 km a norte de Vanduzi (Fig. 10.3-5). O metadiabásio a leste de Manica sofreu o metamorfismo Pan-Africano a 503±8 Ma (Ap. 2), idade obtida de granada-rocha total pelo método Sm-Nd. O emplaçamento da Suíte Guro, bimodal, datada de 867±15 Ma, ocorreu sob condições extensionais em um ambiente de margem cratônica, sendo afectado logo após por um empurrão de descolamento (de direcção E a NE?), datado de 850-830 Ma. Dirks et al. (1998) advogou um cenário similar à Suíte Masoso (Seccão 7.3). A espessura desta unidade sub- horizontal pode ser relativamente pequena (1-2 km). Volume 2 Page 46 A deformação Pan-Africana Tardia é expressa em forma de uma série de zonas de cisalhamento sinistrais, desenvolvidas a leste de Manica, na área marginal do Cráton Zimbabwe e Complexo Báruè (Manhiça et al. 2001). O mesmo cisalhamento é responsável pelo curvamento da Faixa de Rochas Verdes de uma direcção E-W a N-S. Este cisalhamento sinistral é uma feição regional no Orógeno da África Oriental. EVOLUÇÃO GEODINÂMICA Após a tentativa de demarcação dos limites – suturas ou pseudosuturas – entre os “blocos de construcção” – Terrenos Gondwana Oeste, Leste e Sul – que constituem o embasamento cristalino Moçambicano, precendentes da amalgamação Pan-Africana, a evolução geodinâmica da área coberta por esta Nota Explicativa (Volume 2) é esquematizada (Capítulo 11). A evolução Arcaica do Cráton Zimbabwe é bem documentada por outros trabalhos e é aqui apenas brevemente revista. A extensão Paleoproterozóica ocorrida ao longo da margem leste do Cráton, com a deposição das successões dos Grupos Gairezi e Rushinga, datadas de 2.04 Ga, podem ser correlacionadas com eventos extensionais em escala regional no Cráton Kalahari. A evolução Proterozóico-Ordoviciana é esquematizada em termos de uma successão de eventos compressivos e extensivos, afectando as placas litosféricas e resultando na formação de Supercontinentes, seguida pela sua separação, migração e dispersão. Esta compreende a formação da Rodínia (Fig. 11.3) durante o Mesoproterozóico Ciclo Grenvilleano (~ 1.1 a 1.0 Ga), seguida pela separação pós–Rodinia (e.g. emplaçamento da bimodal Suíte Guro a ~867 e 852 Ma) e formação do Gondwana durante o Ciclo Orogênico Pan-Africano durante o Neoproterozóico-Ordoviciano (~690-470 Ma). Dois cenários são geralmente propostos ao Ciclo Orogênico Pan-Africano na África oriental e meridional. Um dos modelos propõe o consumo do Oceano Moçambique e a colisão e amalgamação (~ 640-550 Ma) do Gondwana Leste e Oeste (Fig. 11.1). Este modelo assume a extensão do Orógeno da África Oriental (OAO) a sul de ~ 16° S na Antártida. Nesta Nota Explicativa do Mapa (Volume 2), um modelo alternativo é advogado, baseado na suposição de três maiores “blocos de construcção” pré-Pan-Africanos: os Terrenos Gondwana Oeste, Leste e Sul. Isto é baseado na reinterpretação da evolução geodinâmica da faixa de dobramentos Zambezi-Lufiliana-Damara e dados paleomagnéticos, que sugerem que o Cráton Kalahari e a Antártica não teriam se separado após o Ciclo Orogênico Grenvilleano. Este modelo implica na colisão e amalgamação do Gondwana Oeste e Leste e na formação da OAO entre 690-580 Ma ao norte de 16° S. A sul de 16° S, este foi seguido pela colisão e amalgamação do Gondwana Norte (= Gondwana Leste + Oeste) e Gondwana Sul (Kalahari Cráton + Antártica) e na formação do Orógeno Kuunga entre 580-480 Ma (Fig. 11.4). O rifteamento abortado do Gondwana foi registrado pela deposição dos sedimentos Karoo entre Carbonífero Superior e Jurássico Inferior e culminando com o vulcanismo da Grande Província Ígnea do Karoo (GPIK), com o seu pico ao redor de 183 Ma. Na área coberta por esta Nota Explicativa do Mapa (Volume 2) surgiu o Graben do Médio Zambezi, de direcção E-W e iniciou-se a evolução da Bacia Moçambique. Após a estabilidade de ~ 40 Ma, o rifteamento começou novamente ao redor de 140 Ma, com a evolução da Bacia Moçambique. Desenvolveram-se mais sub-bacias internas de direcção NW-SE no topo do Graben do Médio Zambezi, de direcção E-W. O rifteamento incipiente foi associado com vulcanismo alcalino da Província Alcalina de Chilwa (e.g. Grupo Lupata). Volume 2 Page 47 RECURSOS MINERAIS O modelamento metalogenêtico e a selecção de alvos de prospecção são baseados na relação íntima entre a geodinâmica e metalogenia, geralmente aceita, no contexto de uma database mineral conhecida (Appendix 12.1). Os alvos recomendados para prospecção são (Capítulo 12): ● A faixa de rochas verdes de Utali-Manica para depósitos vulcanogênicos maciços de sulfitos (VMS), depósitos de Ni nos komatiitos, depósitos de ouro (+Cu+Ag), hospedados por BIFs e estructuras; ● O carvão da Formação Matinde* do Karoo Inferior é, sem dúvida, o maior recurso mineral de Moçambique; ● As intrusões estratificadas da Suíte Tête e outras (ultra)máficas possuem potencial para platinóides, cromita, ilmenita, níquel, cobre e ouro; ● Os carbonatitos do Karoo e mais jovens possuem potencialidade para depósitos de fosfato, pirocloro, REEs e fluorita; ● Os supracrustais metamorfisados e migmatisados Báruè são possivelmente derivados a partir de seqüências turbidíticas monôtonas e possuem potencial para depósitos de ouro estructuralmente hospedados. Assumindo-se que os metasedimentos do Complexo Báruè foram empurrados ao topo do Cráton Zimbabwe, a possível remobilizacão de metais por baixo aumenta a potencialidade. Atenção especial deve ser dada às falhas no limite com Karoo (tambèm fluorita) e às falhas preenchidas por material pulverizado e brechado (gouge) (Fig. 6.2, veja também a Secção 4.2). ● Os granitóides TTG emplaçados no Complexo Báruè possuem potencial para pegmatitos, veios e stockworks com estanho, tungstênio, niôbio-tântalo, pedras semi-preciosas, etc. ● As rochas supracrustais dos Grupos Gairezi, Rushinga e Umkondo guardam potencialidade para paleo-pláceres (ouro, diamante), depósitos do tipo unconformity e possivelmente também a depósitos sedimentares exalativos (“Sedex”) do tipo Broken Hill. Volume 2 Page 48 LIST OF TABLES Table 2.1. Bursa-Wolf transformation parameters and root mean square errors valid for provinces of Sofala (north of Beira corridor), Manica, Tete and Zambezia computed by Norconsult International on the basis of 32 common points in the Tete and MOZNET data (Norconsult International, 1998). .......................................................................... 68 Table 2.2. Summary of isotopic age determinations from Mozambique samples, Map Explanation Vol. 2 area................................................................................................. 81 Table 2.3. Geological map sheets in the LOT 2 (+ Extension) area, showing Degree Sheet number, Sheet Codes and Names.................................................................................. 85 Table 2.4. Geological Map Sheets and Map Explanations in the LOT 2 (+ Extension) area, showing Degree Sheet number, Sheet Codes and Names............................................. 86 Table 5.1. Africa’s tectono-structural-magmatic domains. ..................................................... 98 Table 5.2. Lithostratigraphyof the Main Karoo Basin, South Africa (Johnson et al. 1996).108 Table 5.3. Basement terranes in Mozambique. .................................................................... 117 Table 6.1. Simplified lithostratigraphy of the Zimbabwe Craton (mainly after Hofmann et al. 2002). .......................................................................................................................... 119 Table 6.2. Synthesis of geochronological data, Mutare-Manica greenstone belt.................. 156 Table 7.1. Comparative stratigraphic sub-division of the Rushinga sequence...................... 178 Table 7.2. Showing δ13C and δ18O values for carbonate rocks from Rushinga Group. Also given are proportions of dolomite in the carbonate fraction:...................................... 192 Table 7.3. Subdivision of the Gairezi / Fronteira Group according to Hunting (1984) and Consortium (2006) ...................................................................................................... 197 Table 9.1. Lithostratigraphic units in the Lupata Group. ...................................................... 274 Table 9.2. Age determinations volcanic rocks of Lupata Group........................................... 281 Table 12.1. Monte Muambe, reserve calculation. ................................................................ 341 LIST OF FIGURES Fig. 1. Configuration of areas re-mapped by the DNG in collaboration with various international consortia..................................................................................................... 6 Fig. 2. Map Explanation Volume numbers in LOT 2 (+ Extension) and LOT 3 (+ Extension). ......................................................................................................................................... 7 Fig. 2.1. Outline of flow sheet of different phases of the Project. ........................................... 65 Fig. 2.2. Layout of the Landsat-7 TM scenes and mosaics, corresponding with 1:250 000 topographic and geological Degree Sheets over the LOT2 project area (Image by E. Schetselaar). .................................................................................................................. 68 Fig. 2.3. Map of Mozambique showing survey blocks covered by air-borne geophysics....... 70 Fig. 2.4. Comparison of the spatial resolution of short-wavelength magnetic anomalies from the 1983 (right) and 2003 (left) airborne surveys. The white line marks the boundary between the two surveys. .............................................................................................. 71 Fig. 2.5. Subset colour composite images for different band combinations (Images by E. Schetselaar). .................................................................................................................. 73 Fig. 2.6. Image clips to illustrate the effects on integrated enhancement of Landsat TM and gamma ray spectrometry channels. Left original ternary radiometric map, right ternary radiometric map ‘sharpened’ with Landsat TM5. The black polygons correspond with (ultra-)mafic rocks of Atchiza Suite (Images by E. Schetselaar).................................. 75 Volume 2 Page 49 Fig. 2.7. Lithological units of the Rushinga Group from geological maps of the Zimbabwe border region can be traced on a Landsat TM colour composite into Mozambique. Pink lines show the Hunting (1984) compilation, blue lines the Landsat interpretation prepared by the Consortium (Image by E.Schetselaar). ............................................... 76 Fig. 2.8. Complex fold structures and shear zone (green dotted line) in mafic and quartzo- feldspathic units of the Báruè Complex. Pink lines show the Hunting compilation, blue lines the Landsat interpretation prepared by the Consortium (Image by E. Schetselaar). ....................................................................................................................................... 76 Fig. 2.9. IHS composite image of gamma-ray spectrometry channels and Landsat TM band 7 of the Báruè Complex (on the right). Red, darker areas are interpreted as more mafic gneiss units, whereas the green (Th rich) units appear to correspond to felsic units, possibly including late granitoid intrusives. Pink area in the upper left corner corresponds to lithologies of the Rushinga Group (Image by E. Schetselaar). ............ 77 Fig. 2.10. (A) Sample locations for geochemical analysis, (B) Sample locations for petrographic studies. ..................................................................................................... 78 Fig. 2.11. Sample locations for geochronological studies from Lot 2 area, Volume 2. .......... 79 Fig. 2.12. Histogram showing magmatic age peaks as achieved from GTK Consortium datings within Lot 2 area............................................................................................... 80 Fig. 2.13. Unedited contours on the digital elevation model (map sheet 2032). ................... 84 Fig. 2.14. Map sheet division for Lot 2, based on SDS grid.................................................... 85 Fig. 2.15. Division of Map Explanations and numbering of map sheets scale 1 : 250 000. Degree sheets 1630, 1631/1632, 1633,1634, 1732/1733, 1734, 1832/1833, 1834, 1932/1933 and 1934 will be discussed in Map Explanation - Volume 2. .................... 87 Fig. 2.16. The structure of the mineral database used in LOT 2............................................. 88 Fig. 2.17. An example of the data capture for the mineral database, attributes for identification. ................................................................................................................ 89 Fig. 2.18. An example on data capture for the mineral database, attributes for deposit in formation....................................................................................................................... 89 Fig. 4.1. Silicified fault gouge between the Precambrian and Phanerozoic terrains. South of the Changara village. .................................................................................................... 94 Fig. 5.1. Archaean and Palaeoproterozoic (Ubendian) terrains (3800 – 1750 MA (Dirks and Ashwal, 2002). .............................................................................................................. 99 Fig. 5.2. Mesoproterozoic (Kibaran) terrains (1750 – 900 Ma) (Dirks and Ashwal, 2002). . 103 Fig. 5.3. Neoproterozoic-Early Paleozoic (Pan-African) terrains (900 – 500 Ma) (Dirks and Ashwal, 2002). ............................................................................................................ 104 Fig. 5.4. Gondwanide post-Pan-African terrains (~ 570 – 180 Ma) (Dirks and Ashwall, 2002). ..................................................................................................................................... 106 Fig. 5.5. Distribution of Karoo rocks (outcrop and subsurface) in southern Africa (adapted from Verniers et al. 1989)........................................................................................... 107 Fig. 5.6. Break-up of Gondwana (180 – 40 Ma) (Dirks and Ashwal, 2002). ........................ 110 Fig. 5.7. Africa in the Tertiary-Quaternary (30 Ma – Recent) (Dirks and Ashwal, 2002). ... 111 Fig. 6.1. Simplified map of the Zimbabwe Craton showing the major litho-tectonic units (after Hofmann et al. 2002). Key: 1 = Mutare-Manica greenstone belt; 2 = Makaha greenstone belt; 3 = Bindura-Shamva greenstone belt. The northern Archaean gneiss terrain comprises the allochthonous Migmatic Gneiss Terrane (MiGT). ................... 118 Fig. 6.2. Profile across the Zimbabwe craton margin, drawn along the Múdze river channel, south of the Cuchamano village, lat. 17°02´. The banded gneisses, granites and mafic intercalates of the Archaean Mudzi Complex (grey) are overlain by supracrustal rocks of the RushingaGroup. The basement is well exposed upstream the river, west of the Múdze Chizimwe village, as is also the sheared basement/cover junction. The early Volume 2 Page 50 recumbent tectonic structure of the cover is affected, together with the basement, by later upright structure, well exposed in the vertical walls in the gorge across a quartzite ridge in the middle of the profile. ............................................................................... 124 Fig. 6.3. Mountainside of shallow-dipping Archaean granite gneiss-migmatite, intercalated by mafic, metagabbroic bands. At the root of the mountainside in the bush zone there is underlying Gairezi mica schist. The uppermost crest and the slope behind are in turn capped by Gairezi quartzite – see Fig. 6.4. The site is visible from the local village road, running in the southern side of the Senga Senga ring structure, 25 km west of Guro (0510825/ 8059716).......................................................................................... 126 Fig. 6.4. Gairezi quartzite continuing along the crest of the mountain seen in the previous picture (0510290/ 8059716). The allochthonous tectonic position of the Archaean slab shown in Fig. 6.3 is illustrated in Fig. 10.1, where the highest ridge in the left hand part of the profile is the same as the ridge in Figs. 6.3 and 6.4.......................................... 127 Fig. 6.5. A hill of Archaean metagabbro and gneiss (0503448/ 8068699). ........................... 128 Fig. 6.6. Margin of a garnet-rich layer in Archaean gneiss. SE of the Massanga village (0510867/ 8092125). Scale bar is 10 cm. ................................................................... 128 Fig. 6.7. Spinifex textured ultramafic komatiite of the Macequece Formation*. (0477781/ 7914693). Scale bar is 8 cm........................................................................................ 132 Fig. 6.8. Pillow resembling structure in ultramafic metavolcanic rock of the Macequece Formation*. (0481904/7914425). Scale bar is 8 cm................................................... 132 Fig. 6.9. Serpentinite of the Macequece Formation. Serra Mancota (0491879/7912561)..... 133 Fig. 6.10. An unusually dense set of thin veins of asbestos in serpenttinite of the Macequece Formation. A fresh cut of the same rock in bottom right. Western end of Serra Isitaca (0469161/7906104). Scale bar is 8 cm. ...................................................................... 133 Fig. 6.11. Quartz-sericite schist of the Macequece Formation* (0499777/ 7913381)........... 134 Fig. 6.12. (A) Bedded metachert of Macequece Formation*. W of Serra Mancota (0487641/7912903), (B) Detailed photo of bedding in metachert (0493823/7915570), (C) Thinly bedded iron formation of the Macequece Formation*. SE of Serra Penhalonga (0483914/7910010). Scale bar is 8 cm.................................................... 135 Fig. 6.13. (A) Diamictite with angular to subrounded blocks of banded ironstone, metachert and minor amount of metavolcanic rocks. Serra Penhalonga (0477114/7912164), (B) Chaotic deposition of diamictite. South of Serra Vengo (0486042/7912942). Scale bar is 8 cm. ........................................................................................................................ 136 Fig. 6.14. Basaltic pillow lava of the Macequece Formation*. Fresh cut of the same rock in bottom right. (0486694/7914559). Scale bar is 8 cm.................................................. 137 Fig. 6.15. Well preserved tuffite in weathered mafic schist, Macequece Formation* (493553/ 7915854). Detailed photo of the rock in upper left corner. Scale bar is 8 cm. ........... 137 Fig. 6.16. (A) Felsic crystal tuff on southern slope of Serra Penhalonga, (B) Close-up photo from the same rock (0476402/7912066), (C) Felsic crystal tuff altered to kaolin (0476116/7912273), (D) Small enclaves of felsic crystal tuff in amphibole bearing quartz-feldspar porphyry (0476525/7915035). ........................................................... 138 Fig. 6.17. (A) Polymict volcanic conglomerate of the Macequece Formation*. Large light coloured cobbles are felsic crystal tuff, (B) A proper cut indicate foliation, (C) Primary bedding in felsic crystal tuff and jasper-bedded metachert. Note also weathering crust in mafic pebbles of Fig. C. Serra Penhalonga (0476234/7911904). Scale bar is 8 cm. ..................................................................................................................................... 139 Fig. 6.18. Altered and weathered intermediate metavolcanic rock of the Macequece Formation*.................................................................................................................. 140 (0474508/ 7910608). .............................................................................................................. 140 Volume 2 Page 51 Fig. 6.19. (A.) Tuff breccia of Macequece Formation*, (B) Fresh cut is from the rock in Fig. A (0475851/7910573). Scale bar is 10 cm................................................................. 140 Fig. 6.20. Rhyolitic volcanic breccia, of the Macequece Formation*. Penhalonga Valley (0477799/ 7910096). Scale bar is 10 cm. .................................................................. 141 Fig. 6.21. Chemical classification diagrams of metavolcanic rocks from the Manica greenstone belt and ca. 1.8 Ga old dolerites intruding the Manica greenstone belt. For comparison, plotted is an outlined area of ca. 1.1 Ga old dolerites from Lot 3 area and two analyses of ca. 1.0 Ga old metadolerites.............................................................. 142 Fig. 6.22. A nearly monomictic volcanic conglomerate at the lower contact of Vengo Formation*. Northern slope of Serra Isitaca. (0474777/7908663). Scale bar is 10 cm. ..................................................................................................................................... 144 Fig. 6.23. Basal conglomerates of the Vengo Formation*. (A) Polymict conglomerate between Archaean granite and phyllite of Vengo Formation*. Contact to granite is not exposed, but is presumable tectonic (0493843/7917753), (B) Conglomerate between metabasalt of the Macequece Formation* and marble of the Vengo Formation* (0479785/ 7915525), (C) Sheared conglomerate between mafic metavolcanic rock of the Macequece Formation* and phyllite of the Vengo Formation* (0493374/7916039). Scale bar is 10 cm. .................................................................... 145 Fig. 6.24. Small-grained meta-greywacke in the northern slope of Serra Isitaca, M’Beza/Vengo Formation*. Close-up photos of the same rock below. (0475200/ 7909150). Scale bar is 10 cm...................................................................................... 146 Fig. 6.25. A. Openly folded, interbedded phyllite and quartzite of Vengo Formation* (0493105/ 7916543). Close-up photos: (A) Phyllite, (0492870/7916747), and (B) Quartzite (0493328/ 7916369). Scale bar is 10 cm..................................................... 147 Fig. 6.26. Iron-rich lithic metasandstone and quartzite of Vengo Formation* (0497101/7916391). (A) quartzite and remobilised magnetite (0497101/7916391), (B) a detailed photo from the bed in central part of the main photo, (C) thinly bedded low- grade iron formation (0497108/7916188). Scale bar is 10 cm. ................................. 148 Fig. 6.27. Marble outcrop of the Vengo Formation* in the area between Rio Revué and Rio Chua (0479789/ 7915474). Scale bar is 10 cm. .......................................................... 148 Fig. 6.28. Banded ironstone, close to the small village of Parafina, 23 km SW from the Chicamba dam (0506495/7861279). Scale bar is 10 cm. ........................................... 149 Fig. 6.29. (A) Deformation related shear banding of porphyritic granite-granodiorite close to Rio Revué.N of the Chicamba Real dam (0506572/7896051), (B) U-Pb dated, porphyritic and coarse-grained granite-granodiorite in a quarry along the Manica – Chimoio road, north of the Chicamba Real dam (0509201/ 7898987), (C) K-feldspar bearing, fine to medium-grained granodioritic-dioritic fragments within porphyritic granite-granodiorite SE-Vumbarimira, East of Mte Vumbamira (0504278/ 7886156). Scale bar is 10 cm. ...................................................................................................... 151 Fig. 6.30. Medium-grained granodiorite SW of the Chicamba Real dam (0492233/7873881). Scale bar is 10 cm. ...................................................................................................... 151 Fig. 6.31. Weakly foliated, porphyritic granite of the Mavonde Complex, NW of the Chicamba Real dam (0500996/7894157). Scale bar is 10 cm. ................................... 152 Fig. 6.32. (A) Small-scale folding of banded tonalitic gneiss, close to Rio Munhinga, West of Serra Gurrambira (0514709/7857585), (B) Boudin of mafic dyke that cuts the banded gneiss. Rio Revué, 7 km East of the Chicamba Real dam (0520038/7877034). Scale bar is 10 cm................................................................................................................. 153 Fig. 6.33. (A) Felsic neosomes and intermediate paleosomes in migmatite exposed near Rio Nhamangutena, south of the Chicamba Real dam (0508399/7871923), (B) Typical Volume 2 Page 52 medium and even-grained gabbroic rock with brown weathering surface. Rio Munhinga, north of the Rotanda village (0487702/7850629). Scale bar is 10 cm. .... 154 Fig. 6.34. Chemical classification diagrams of Archaean granitoids and gabbros/dolerites. 155 Fig. 6.35. Boulder field of Palaeoproterozoic dolerite in Machipanda area. Serra Isitaca in the background (0474346/7903337). ................................................................................ 158 Fig. 6.36. Medium grained uniform gabbroic rock representing characteristic type of Mashonaland mafic rocks. Chimanimani area 25 km´s ENE from Mt.Binga. (7832192/ 0492127). .................................................................................................................... 161 Fig. 6.37. A road cut 40 km east of Manica. Gairezi schist with quartz veins, weathered brownish red. (0515362/7896822).............................................................................. 162 Fig. 6.38. Gairezi schist, the same road cut as above. The middle part of the figure shows a metadolerite dyke, 5 – 6 m wide, weathered into brown in situ soil, where the original metadolerite has been preserved only as exfoliation spheroids. ................................. 162 Fig. 6.39. A detail from above. The sample for a Sm/Nd dating was taken from the spheroid at the lower left hand part, a very hard in situ relict of the original dyke................... 163 Fig. 7.1. Textures in compositionally banded gneisses of the Mavuradonha Complex. (A) Smoothly north-east dipping gneiss in the Luia River (0399501/8182166), (B) Tight chevron folds in the same rock, (C) Quartz-feldspar fragments and augens, probably after boudinaged pegmatite dykes (0400138/8182503), (D) Hornblende porphyroblasts in a banded gneiss. Rio Luia (0400475/8182534). Scale bar is 10 cm...................... 169 Fig. 7.2. Roughly NW-dipping fault surface (dashed line) between (top) clastic sediments of the Matinde Formation* (Lower Karoo) and (bottom) Proterozoic Masoso rocks. The hill in background comprises mylonitic rocks (see below) of the Masoso Suite. 'Big bend' of the Luia River (044658/8185187)................................................................. 170 Fig. 7.3. (A) Brecciation of rocks due to brittle deformation at the northern fault zone of the Masoso Suite. 'Big bend' of the Luia River (0455554/8188053), (B) Blastomylonite with large feldspar augen near the northern fault zone of the Masoso Suite. About 9 km west of the 'Big bend' of the Luia River (0446310/8185019). Scale bar is 15 cm. ... 171 Fig. 7.4. (A) Striped mafic gneiss (metatuffite?) of the Masoso Suite, (B) Detailed photo of metatuffite (?) with random feldspar porphyroclasts. Note that bands or laminae have sharper upper contacts, possibly showing bifurcation and erosional features (micro- channelling?). 'Big bend' of the Luia River (0456394/8186302). Scale bar is 15 cm.172 Fig. 7.5. Banded metatuffite (?) with coarse feldspar-rich boudins of microcline pegmatite dykes. Masoso Suite. 'Big bend' of the Luia River (0446460/ 8183671). Scale bar is 15 cm................................................................................................................................ 173 Fig. 7.6. Striped gneiss of the Masoso Suite with plenty of quartzofeldspathic segregations. Note intruding pegmatite dykes of two generations. Rio Luia (0466641/8179565). Scale bar is 10 cm. ...................................................................................................... 173 Fig. 7.7. (A) Recumbent folding in felsic gneiss of the Masoso Suite in Rio Luia (0459874/8182853), (B) Box fold with a subhorizontal fold axis in metatuffite (?) of the Masoso Suite. Rio Luia (0471273/8178107), (C) Mafic gneiss of the Masoso Suite showing compositional banding and tight refolded isoclinal folds. Note cross-cutting pegmatite ‘schlieren’ in top of block. Southern tributary of the Luia River (0465295/8176701). Hammer is 65 cm long, scale bar is 15 cm. .............................. 174 Fig. 7.8. (A) Garnet-rich xenolith in striped mafic gneiss of the Masoso Suite, (B) Detailed photo of the xenolith. Rio Luia (0449677/8183970). Scale bar is 10 cm, diameter of coin is 3 cm. ................................................................................................................ 174 Fig. 7.9. Microphotograph of mafic xenolith in striped mafic gneiss of the Masoso Suite (G - garnet, H - hornblende). Rio Luia (0449677/8183970). Width of photo is 25 mm.... 175 Fig. 7.10. Detail map from Monte Pitão area......................................................................... 179 Volume 2 Page 53 Fig. 7.11. (A) Sub-horizontal beds of feldspathic Lower Quartzite along the bank of the Rio Embuca (0496514/ 8123294), (B) Vein quartz pebble metaconglomerate of the Lower Quartzite. Rio Embuca Formation* of the Rushinga Group. East of the Cuchamano village (0491956/8126197). Scale bar is 8 cm............................................................ 180 Fig. 7.12. Massive but weakly foliated quartzofeldspathic gneiss, forming a ridge around a granitic intrusion. Rio Embuca Formation*. Pico Cocodeze (0492186/8154974). Scale bar is 10 cm................................................................................................................. 181 Fig. 7.13. (A) Steeply east dipping arkosic quartzite interlayer in banded amphibolite of the Rio Embuca Formation*. Rio Mázoè (0498959/8154014), (B) Laminar parallel bedding in arkosic quartzite of the Rio Embuca Formation*. Rio Mázoè (0498959/8154014). Scale bar is 15 cm. .................................................................... 182 Fig. 7.14. (A) Distinct bedding in mica schist with vein quartz lenses (sweat-outs?) arranged parallel to palaeo-bedding. A thick orthoquartzite interbed is exposed on the right. Rio Embuca Formation*. Rio Mazoe (0492410/8153865), (B) Detailed photo of massive garnet-sillimanite gneiss in Rio Mazoe (0498006/8127875). Scale bar is 8 cm. ....... 183 Fig. 7.15. Weathered surface with quartz-sillimanite nodules in quartzofeldspathic gneiss of the Rio Embuca Formation*. South of the Mazoe River (0498975/ 8144425). Scale bar is 15 cm. ...................................................................................................................... 183 Fig. 7.16. (A) Transition zone between banded amphibolite and pinkish laminar arkosic quartzite (on the left). MontePitão Formation*. Rio Mazoe (0484557/8154515), (B) Banded amphibolite (green) with pegmatites (pinkish). Note pegmatitic dykes are both parallel and oblique to banding. Note also angular amphibolite boudins in pegmatite. Monte Pitão Formation* in Rio Mazoe (0499557/8154165), (C) Detailed photo of compositional banding. Scale bar is 15 cm. .............................................................. 184 Fig. 7.17. Banded amphibolite with regular arrays of leucosome or quartz-filled tension gashes, oblique to banding. Note that gashes are confined to specific, slightly darker (less ductile?) layers. Monte Pitão Formation*. Rio Mázoè (0501282/8154634). Scale bar is 15 cm................................................................................................................. 185 Fig. 7.18. (A) In situ blocks on top of calc-silicate rock ridge. Monte Pitão Formation*. (0499220/8144361), (B) Narrow solution cavities formed after dissolution of carbonatic bands on the weathering surface of calc-silicate rock of the Monte Pitão Formation*. South of Mte Metungurué (0492812/8127621). Scale bar is 8 cm. ...... 186 Fig. 7.19. Ellipsoidal epidote-bearing 'concretions', possibly after boudinaged marble layers in calc-silicate rock of the Monte Pitão Formation*. (0498805/ 8153867). Scale bar is 12 cm........................................................................................................................... 187 Fig. 7.20. Distinct banding in Lower marble of the Monte Pitão Formation* in Rio Múdze (0493465/ 8117732). Scale bar is 10 cm. ................................................................... 187 Fig. 7.21. Fresh outcrop of flattened quartz(-garnet)-sillimanite nodules in the biotite-garnet- sillimanite schist of Monte Pitão Formation*. Mte Pitão (0497671/8123740). Scale bar is 8 cm................................................................................................................... 188 Fig. 7.22. Eastwards overturned open fold of the Upper Quartzite. The deep gorge of the Múdze River, across the high quartzite ridge 2 km east of the Múdze Chizimwe village. Note the two persons for realizing the scale (0494231/8117398). ................ 189 Fig. 7.23. Base of the Upper Quartzite in the synclinal structure illustrated by Fig. 6.2, middle part of the profile. Close to the previous figure in Rio Múdze (0494231/ 8117398). 189 Fig. 7.24. (A) Very coarse-grained Upper quartzite on top of a ridge, east of Cuchamano (0491735/8124162), (B) Pressure solution bands in Upper quartzite. Múdze River (0494231/8117398). Scale bar is 10 cm. .................................................................... 190 Fig. 7.25. Location of carbonate rock samples for C-isoptope analyses, Rushinga Group. Marble is shown as orange colour on map.................................................................. 192 Volume 2 Page 54 Fig. 7.26. Coarse-grained, 'spotted' meta-anorthosite in the Mazoe River (0483702/ 8153290). Scale bar is 8 cm. ........................................................................................................ 193 Fig. 7.27. (A) Highly foliated quartzite of the Gairezi Group near the Zimbabwean border, NW of Mte Binga (0495667/7819717), (B) Small scale, tangential cross-bedding in saccharoidal quartzite of the Gairezi Group. Mte Songuiero (0516476/7983378), (C) Polymictic conglomerate of the Gairezi Group. Mte Chicamba Real (0519336/7884309). Scale bar is 8 cm. ...................................................................... 199 Fig. 7.28. Salmon-red marble of Gairezi Group with obscure bedding. West of Monte Metambisse (0504009/ 8042246). Scale bar is 10 cm. ............................................... 200 Fig. 7.29. Crenulation microfolding on the foliation surface of the garnet staurolite mica schist of the Gairezi Group. W of Serra Metambisse (0503171/ 8042632). Scale bar is 10 cm........................................................................................................................... 200 Fig. 7.30. Knife-blade outcrops produced by the subvertical foliation in the muscovite-biotite schists of the Gairezi Group. SE of Mte Tiguire (0509959/ 8043535)....................... 201 Fig. 7.31. (A) Kyanite prisms in a garnet-kyanite mica schist of the Gairezi Group. W of Mte Senga-Senga (0507755/8063987), (B) Staurolite and garnet porphyroblasts in a muscovite-biotite schist layer of the Gairezi Group. North of Mte Metambisse (0509035/8064117), (C) Garnet-sillimanite-biotite gneiss of the Gairezi Group. Mte Nhanareze (0524774/7970755). Scale bar is 10 cm. .................................................. 202 Fig. 7.32. Garnet-rich bands in quartzite of the Nhamessolo Formation*. N of Rio Pompue (0619058/ 8090728). Scale bar is 15 cm. ................................................................... 204 Fig. 7.33. (A) Alternating layers of calc-silicate rock, marble and quartzite of the Nhamessolo Formation*. Rio Ludezilicura (0614312/8087833), (B) Banded calc-silicate rock of the Nhamessolo Formation*. Rio Ludezilicura (0611999/8088225). Scale bar is 15 cm. ..................................................................................................................................... 205 Fig. 7.34. Megacrystic marble of the Nhamessolo Formation*. Marble ridge to the west of Mte Bongururo (0592524/8085674). Scale bar is 15 cm............................................ 206 Fig. 7.35. Garnet-bearing migmatites and gneisses. (A) Ghostly remnants of psammitic palaeosome in garnet-bearing Mungári leucomigmatite. Rio Ludezilicura (0601526/8080343), (B) Migmatitic garnet (biotite) gneiss, which comprises fragments of psammitic beds. SE of the Guro village (0551420/8054080). Scale bar is 10 cm . 208 Fig. 7.36. Deformed K- feldspar phenocrysts in the Chacocoma granite. NE of the Mazoe village (0548786/ 8178067)........................................................................................ 209 Fig. 7.37. (A) Strongly mylonitized Chacocoma granodiorite. Main road SE of Mte Caroeira (0560146/ 8203686), (B) Ruptured mafic band in Chacocoma gneiss, tension cracks filled with quartofeldspathic material. A hill south of Mte Caroeira (0560391/8203461). Scale bar is 10 cm. .................................................................... 210 Fig. 7.38. (A) Slightly deformed (Pan-African) pegmatite dykes cut strongly deformed Chacocoma granite. A hill south of Mte Caroeira (0560391/8203461), (B) Large xenolith of the highly deformed Chacocoma granite in Pan-African pegmatite. A road cut south of Monte Caroeira (0558051/8200388). Scale bar is 10 cm. ...................... 210 Fig. 7.39. (A) Pure, fine-grained quartzite in Rio Meassangaze (0561608/7867454), (B) Recrystallized quartzite with (eroded) pelitic interbeds. Scale bar is 10 cm. ............. 213 Fig. 7.40. Porphyroblastic semipelitic paragneiss with quartzofeldspathic interbeds. Chimoio Group, west of the Pungué River bridge (0614093/7900199). Scale bar is 15 cm..... 213 Fig. 7.41. Migmatitic paragneisses of the Chimoio Group. (A) Banded psammitic gneiss with plenty of segregated leucosome lenses and veins in the Pungué River (0597116/7917271), (B) Strongly migmatised, garnetiferous paragneiss northeast of Mte Chimoio (0549203/7901742), (C) Migmatitic paragneiss with garnet-rich melanosome rafts. Rio Pompue (0614699/8085107), (D) Stromatic structures in Volume 2 Page 55 migmatitic paragneiss northwest of Mte Bangontauro (0620099/8054653). Scale bar is 10 cm........................................................................................................................... 215 Fig. 7.42. Sedimentary structures in paragneisses of the Chimoio Group. (A) Paragneiss with well-preserved bedding, composed of alternating micaceous (dark brown) and quartzitic (light greyish brown) layers. Road cut northwest of Mte Cùncuè (0636968/7984106), (B) Obscurebedding in psammitic paragneiss. Rio Lucite (0545833/7789400). Scale bar is 10 cm, compass is 12 cm. ...................................... 215 Fig. 7.43. Texturally rather massive, foliated tonalitic gneiss, which comprises clinopyroxene. Rio Sangadeze (0627142/ 8052904/). Scale bar is 10 cm. ......................................... 216 Fig. 7.44. Typical metagranitic sugarloaf mountain of Monte Chimoio (0543610/7899353). ..................................................................................................................................... 217 Fig. 7.45. Phyllitic schist with crenulation cleavage. NE of the Inchope village (0605515/ 7877969). Scale bar is 10 cm...................................................................................... 218 Fig. 7.46. (A) Garnet-rich leucosome lenses in quartzofeldspathic gneiss of the Macossa Group. Rio Pompué (0615987/8085822), (B) Large enclaves of garnet-quartz intergrowths in semipelitic paragneiss of the Macossa Group. Rio Nhandugue (0599392/7998519). Scale bar is 15 cm. .................................................................... 219 Fig. 7.47. Quartz-feldspr gneiss of the Macossa Group with leucosome segregations. Rio Nhandugue (0588802/ 8014904). Scale bar is 15 cm. ................................................ 220 Fig. 7.48. Meta-arkose with thin, amphibolitic bands. Chimoio Group. South of Mte Senge (0575910/ 8068060). Scale bar is 15 cm. ................................................................... 220 Fig. 7.49. Thinly bedded garnet-bearing feldspathic quartzite of the Macossa Group. Rio Mudicapinda (059592/7605199). Scale bar is 15 cm. ................................................ 221 Fig. 7.50. (A) Primary sedimentary bedding in metagreywacke of the Chimoio Group. Rio Nhandugue (0621907/7980956), (B) Garnetiferous semipelitic gneiss of the Chimoio Group. Nhandugue River (0595823/8003075), (C) Massive micaceous gneiss of the Chimoio Group with plenty of oriented potassium feldspar porphyroblasts. North of the Gorongosa village (0613173/7937710). Scale bar is 15 cm. ................................ 222 Fig. 7.51. (A) Banded calc-silicate gneiss with thin, psammitic interbeds in the Nhaluiro River (608958/8057192), (B) Strongly folded and contorted calc-silicate rock of the Macossa Group with weathered-out marble interbeds. Rio Nhandugue (0598897/7999904). Scale bar is 15 cm. .................................................................... 223 Fig. 7.52. Exfoliated outcrop of massive, coarse-grained gabbro, located south of Mte Chimoio (05437927/898098)...................................................................................... 224 Fig. 7.53. Monte Urderi, located 30 km north of the Chimoio town. The mountain has a broadly rounded form, which indicates that it is composed of gneissose granitoids.. 225 Fig. 7.54. Monte Hombe granitoids. (A) Weakly foliated, even-grained granodiorite in Rio Nhazonia (0536820/7971501), (B) Granodioritic gneiss with light fresh surface. 15 km east of Mte Hombe (0533822/7951895), (C) Tonalitic hornblende gneiss, which comprises amphibolitic bands and granitic segregations. 10 km south of Mte Hombe (0544686/7934094). Scale bar is 10 cm. .................................................................... 226 Fig. 7.55. (A) Amphibole-bearing granite gneiss with garnet-bearing leucosome segregations. E of the Vanduzi village (0533071/7904133), (B) Detailed photo of the same rock, (C) Porphyric texture preserved in amphibole-bearing granite gneiss. W of Mte Nhambira (0544811/7976702). Scale bar is 10/15 cm. ............................................................... 227 Fig. 7.56. (A) Monte Tomonda leucocratic gneiss with garnet-rich leucosomes. South of the Macossa village (0597896/801894), (B) Compositionally intermediate variety of Tomonda leucocratic gneiss, comprising orthopyroxene and clinopyroxene (0627886/8073037). Scale bar is 10 cm. .................................................................... 228 Volume 2 Page 56 Fig. 7.57. (A) Granodioritic orthogneiss east of the Inchope village (0599337/7875146), (B) Strongly migmatised gneiss west of Monte Chigove (0529339/7893701). Scale bar is 10 cm........................................................................................................................... 229 Fig. 7.58. Medium-grained, deformed Monte Senge granite. NE of Mte Senge (0593237/ 8082809). Scale bar is 15 cm...................................................................................... 230 Fig. 7.59. Chemical classification diagrammes for rocks of the Báruè Complex.................. 231 Fig. 7.60. Ridge-forming vertical sheet of felsic component of the bimodal Guro Suite. Monte Nhadimba. ................................................................................................................... 234 Fig. 7.61. (A) Streaky fabric in aplitic granite of the Guro Suite. Old quarry E of the Cuchamano village (0494400/ 8126625), (B) Wall-parallel fabric developed witin a discordant felsic dyke of the Guro Suite. Magassa village (0562800/8195751). Scale bar is 8 cm................................................................................................................... 235 Fig. 7.62. Flattened and stretched mafic and felsic association of the Guro Suite. Rio Luenha bridge (0527931/8134434).......................................................................................... 236 Fig. 7.63. (A) Detailed photo of mafic and felsic components in Fig. 7.62, (B) Intrafolial isoclinal folds and a gabbroic boudin of the mafic component of the Guro Suite, hosted by the felsic component. NW of Monte Nhadimba (0551345/ 8192806). Scale bar is 15 / 8 cm........................................................................................................................... 237 Fig. 7.64. Chemical classification diagrammes for rocks of the bi-modal Guro Suite. ......... 238 Fig. 7.65. (A) Pegmatitic variety of Monte Caverie granite. SE of Mte Nhambalati (0520308/8204740), (B) Medium-grained dyke of Monte Caverie granite intrudes foliated Chacocoma granite. NE of Mte Caconde (0530317/8211588). Scale bar is 10 cm................................................................................................................................ 241 Fig. 8.1. Geophysical signatures of the Tête Suite. (A) Th-U-K ternary radiometry, coregistered with Landsat TM Band 5, showing the low to very low radiometric signature of the gabbro-anorthosite suite, (B) Aeromagnetics – Total magnetic intensity image of the suite. Note NE-SW directed sinistral faults cutting the suite.. 243 Fig. 8.2. Orthocumulate texture in coarse-grained gabbro-anorthosite of the Tete Suite. An outcrop by the Tete-Songo road. The dark minerals are orthopyroxene (reddish brown and magnetite (black). (0595846/8225674). Width of the number plate is 5 cm. ...... 244 Fig. 8.3. Hypothetical reconstruction of the original position of the Tête Suite prior to SE- directed tectonic transport over a distance of ~ 40 45 km (length of arrow). The Chipera massif could represent the western autochthonous extremity of the Tête Suite. The Chimadzi possibly qualifies as a feeder. Background image is Th-U-K ternary radiometry, co-registered with Landsat TM Band 5 (after Tahon, 2003)................... 245 Fig. 9.1. Coal seam in cross-bedded sandstone of the Moatize Formation*. Road cut east of the Moatize town (0581066/8218213)........................................................................ 248 Fig. 9.2. Well-bedded sandstones with interlayered clay laminae. The Matinde Formation* in Rio Mavúzi (0527823/8191363). Hammer is 65 cm long. ......................................... 249 Fig. 9.3. Pebbly sandstones with intraformational conglomerate horizons. The Matinde Formation*. Rio Mavúzi (0527823/ 8191363). Hammer is 65 cm long. ................... 250 Fig.9.4. Large scale cross-bedding in coarse-grained sandstone of the Cádzi Formation*. North of Mte Nhambanda (0710658/ 8126999). Scale bar is 10 cm. ......................... 251 Fig. 9.5. Sandstones of the Cádzi Formation*. (A) Thick beds of mineralogically immature sandstone. Road cut east of Rio Muche bridge (0640385/7984758), (B) Microphotograph of mineralogically immature arkosic sandstone, which composes about equal amount of quartz and feldspar grains (0589536/8179007). Scale bar is 10 cm, width of photo is 11 mm. ..................................................................................... 251 Fig. 9.6. Highly immature, conglomeratic sandstone of the Cádzi Formation*. Road cut east of Rio Muche bridge (06414355/ 7985068). Scale bar is 10 cm. ............................... 252 Volume 2 Page 57 Fig. 9.7. Exposed contact between basaltic lava of the Rio Nhavúdezi Formation* (top) and underlying conglomerate of the Cádzi Formation*. A tributary of Rio Mebahata (0635136/ 8017203). Scale bar is 8 cm. ..................................................................... 253 Fig. 9.8. Rhyolitic interflows in the upper part of the Rio Nhavúdezi Formation* in Rio Mebahata (0636470/8016042). Hammer is 65 cm long. ............................................ 253 Fig. 9.9. Columnar jointing in amygdaloidal basalt of the Rio Nhavúdezi Formation*. Rio Mebahata (0636409/8016210). Scale bar is 8 cm....................................................... 254 Fig. 9.10. Contact between rhyolitic lava flow of the Serra Bombuè Formation* (top) and brecciated basalt flow of the Rio Nhavúdezi Formation*. Rio Mebahata (0636470/ 8016042). Hammer is 65 cm long............................................................................... 255 Fig. 9.11. A pile of thin, vesicle-rich basaltic lava flows of the Rio Mazoe Formation*. W of the Rio Mazoe bridge (0540215/8170865). ................................................................ 256 Fig. 9.12. Ropy lava (pahoehoe) structure in basaltic lava flow. Rio Mazoe Formation*. West of the Rio Mazoe bridge (0539576/ 8170743). Scale bar is 15 cm. .......................... 256 Fig. 9.13. Large, zeolite-filled vugs (gas cavities) in the upper zone of basaltic lava flow of the Rio Mazoe Formation*. Serra Mevunge dome (0420090/ 8227068). Scale bar is 15 cm................................................................................................................................ 257 Fig. 9.14. Exposure showing contact between vesicular Bangomatete rhyolite (light grey; top) and Mazoe basalt (dark grey; bottom) near the Birira village (0519978/8181483). Scale bar is 8 cm................................................................................................................... 257 Fig. 9.15. Volcanic structures in rhyolitic flows of the Bangomatete Formation*. (A) Volcanic breccia with fragment of welded (ash flow) tuff, having fiammes and glomeroporphyric aggregates of alkali feldspar, probably due to vapor-phase crystallisation, (B) Pumice fragments with roundish or tubular vesicles in non-welded upper part of tuff. NW of Monte Inhamangombe (0521321/8174795), (C) Flow- banding in the core of the flow. Rio Luia and Rio Mazoe confluence (0523887/8168344), (D) Quartz and zeolite-filled lithophysae in the basal zone of rhyolitic flow. Scale bar is 15 cm. ............................................................................. 259 Fig. 9.16. Rhyolitic lava flow with small eruptive vent in background. The Bangomatete Formation. Rio Mazoe (0532910/ 8170633). ............................................................. 259 Fig. 9.17. Quartz-filled lithophysae in welded ash-flow tuff of the Bangomatete Formation*. Mte Inhamangombe (0523787/8169299). Scale bar is 15 cm. .............................. 260 Fig. 9.18. A chaotic breccia, comprising of large, angular basaltic and rhyolitic fragments, probably representing a talus breccia around the caldera. Bangomatete Formation*. North bank of the Rio Mazoe (0524862/ 8168927). Scale bar is 15 cm ................... 260 Fig. 9.19. Highly vesicular rhyolite of the Bangomatete Formation*. East of Mte Chimandau (0615085/7989540). Diameter of coin is 2.5 cm. ....................................................... 261 Fig. 9.20. Surface folding of viscous rhyolite lava flow belonging to the Bangomatete Formation*. NE of Mte Balati (0402690/8203478). Scale bar is 15 cm. ................... 262 Fig. 9.21. Massive obsidian flow within the rhyolites of the Bangomatete Formation*. Note the conchoidal fracture in the sample on the right in the picture. Location ~ 10 km W of Mte Sluxia (0405729/ 8207966). Scale bar is 15 cm. ............................................ 262 Fig. 9.22. Rhyolite feeder, showing strong weathering of the Bangomatete Formation*. Birira area (0521570/ 8180637). Scale bar is 10 cm............................................................ 263 Fig. 9.23. Exposure of basalt flows of the Chueza Formation* in the Chueza area (0657706/8174088). Scale bar 10 cm. ........................................................................ 264 Fig. 9.24. (A) Basaltic lava flows with elongated and bended pipe amygdules, showing the flow direction from southeast, (B) Detailed photo of lava flow contact with fork-like pipe amygdules at the base of the upper flow, (C) A vertical cross section of lava lobes Volume 2 Page 58 in a thin, basaltic lava flow. The Pompue River gorge in the Búzue village (0624901/8092174). Scale bar is 15 cm. .................................................................... 265 Fig. 9.25. Tectonic contact between basalts of the Chueza Formation* (on the left) and Mesoproterozoic gneisses. South bank of the Pompue River (0620158/8090549). Scale bar is 15 cm................................................................................................................. 265 Fig. 9.26. Chemical classification diagrammes for Karoo volcanic rocks in the LOT2 area.267 Fig. 9.27. Exposure of Rukore granite and dolerite dyke. The Rukore Suite. Mte Rukore (0472208/8158403). Scale bar 8 cm. .......................................................................... 268 Fig. 9.28. Granite of the Rukore Suite. Note felsic and mafic enclaves, the latter with feldspar phenocrysts in a microcrystalline matrix. Texture of felsic enclave is subvolcanic. Mte Rukore (0472208/8158403). Scale bar is 8 cm........................................................... 269 Fig. 9.29. Quartz-feldspar porphyry dyke with zoned feldspar phenocrysts and small, basaltic enclaves. North of Rio Mazoe (0459259/8191348). Scale bar is 15 cm. ................... 269 Fig. 9.30. Medium-grained, massive gabbro of the Gorongosa Intrusive Suite. NW slope of Gorongosa Mountain (0608226/ 7952881). Scale bar is 10 cm. ................................ 272 Fig. 9.31. Syenite granite of the Gorongosa Intrusive Suite, sampled for age determination. E slope of Gorongosa Mountain (624079/ 7964478). Scale bar is 10 cm..................... 272 Fig. 9.32. Sandstone of the Tchazica Formation* showing subvertical jointing in the Massangano area (0597759/ 8168051). Scale bar is 10 cm........................................ 275 Fig. 9.33. Bedding in reddish sandstone of the Tchazica Formation* (0598465/ 8167699). Marker pen is 14 cm long. .......................................................................................... 275 Fig. 9.34. Lower part of the Lupata Group on the left bank of the Zambezi River. Behind one of the authors rhyolites of the Monte Palamuli Formation* form the top of the plateau, overlying sandstones of the Tchazica Formation*...................................................... 276 Fig. 9.35. Monte Palamuli rhyolites (Lupata Group) outcropping at the Chueza dam on the Sorodeze River (0658433/8174691). .......................................................................... 277 Fig.9.36. Massive rhyolite lava flows of the Monte Palamuli Formation* at the Sorodeze River dam, in the Chueza area (0658433/8174691) Scale bar is 10 cm. .................... 277 Fig. 9.37. (A) Tabular cross-bedding in coarse-grained sandstone of the Monte Mazambulo Formation*, (B) Fossil root in fine-grained sandstone of the Monte Mazambulo Formation*. Southeast of the Mte Nhamalongo (0603484/8157829), (C) Tangential cross-bedding and conglomeratic interbeds in coarse-grained sandstone of the Monte Mazambulo Formation*. Southeast of the Mte Nhamalongo (0602534/8157764). Scale bar is 15 cm. ...................................................................................................... 278 Fig. 9.38. Detailed photo of trachytic texture in phonolitic lava of the Monte Linhanga Formation*. SW of Mte Palamuli (0617605/8162505). Scale bar is 10 cm............... 279 Fig. 9.39. (A) Trachytic Agglomerate Member of the Monte Linhanga Formation* forming the northeast escarpment of Monte Cuadezo in the Chueza area (0657474/8173990), (B) Detailed photo of trachytic agglomerate with roundish ejecta. The Monte Linhanga Formation*. SW of Monte Palamuli (0617017/ 8162544). Scale bar is 15 cm.......... 280 Fig. 9.40. Chemical classification diagrams for volcanic rocks of the Lupata Group. The rocks clearly plot in the field of phonolite (a) or phonolite-trachyte (b and c). The alkaline trend is obvious (d) as well as the high Fe/Mg ratio (e)................................ 281 Fig. 9.41. Polymictic conglomerate with well-rounded quartzite and lava clasts. The Basal conglomerate Member of the Sena Formation*. NE of the Canxixe village (0654401/ 8077386). Scale bar is 10 cm...................................................................................... 283 Fig. 9.42. (A) Polymictic basal conglomerate of the Mágoè sandstone, comprising granioids and gneisses mostly from the Precambrian terrain. Rio Nhamafite (0461002/ 8191284), (B) Polymictic basal conglomerate of the Mágoè Formation*, comprising rounded Volume 2 Page 59 clasts of Karoo volcanics. Tributary of the Luia River south of of the Serra Mevunge dome (0394485/8190520). Scale bar is 15 cm. ............................. 284 Fig 9.43. High wall of slightly tilted Mágoè sandstone, unconformably covered by massive colluvial (Quaternary) deposits (dark brown). A tributary of Rio Molinge (0420866/ 8230611). .................................................................................................................... 285 Fig. 9.44. Large-scale tabular cross-bedding in a variously altered Mágoè sandstone. A tributary of Rio Metangua (0450792/8206993), (B) Tile-red, fresh sandstone portions in a strongly altered Mágoè sandstone. Rio Caluaze (0419975/ 8229045). Scale bar is 15 cm, hammer is 50 cm long..................................................................................... 285 Fig. 9.45. A photo taken towards east from the top of Xiluvo Mount, showing a quarry in a satellite intrusion in the background. (0612643/7872650). ........................................ 287 Fig. 9.46. Rio Mufa carbonatite; subcontinuous outcrop along the crest of the local ridge. (A) Top of the ridge. The background belongs to the Precambrian granitoids, to the left there is the overlying Tete gabbro rising to higher altitudes. Open warps of the layering, with northerly fold axis, (B) Carbonatite debris on the crest, steep slopes to both sides, (C) Obscure layering by colour variation, apatitic bands and clusters of magnetite (width of the number plate is 5 cm.), (D) Close-up from Figure A: the layering is shown by the grain size and compositional variation, including the variable contents of apatite and magnetite. SE of Mte Caconde (0532281/8213274). ............ 289 Fig. 9.47. Fault gouge fill showing rhyolitic country rock fragments cemented by a network of milky quartz. E slope of Mte Domba (0507839/ 8146860). Scale bar is 15 cm. ... 291 Fig. 9.48. Steep wall of reddish brown fluvial sand, covered by ~2 – 3 m thick, light brown layer of colluvium. Rio Mazoe (504110/8154833)..................................................... 292 Fig. 9.49. Massive colluvium deposit at the southern margin of the Mevunge dome (0393485/ 8189658). Scale bar 15 cm.......................................................................................... 293 Fig. 9.50. Large sand bank in the Zambezi River. The Lupata gorge (0616700/ 8162200). Note a helicopter as a scale. ........................................................................................ 294 Fig. 10.1. Profile extending from Archaean crust across Palaeoproterozoic formations until the Mesoproterozoic Báruè Complex, showing extensive allochthonous structure at the Zimbabwe craton margin. Latitude ca. 17°30', south of Guro. Cf. Figs. 6.3 and 6.4. 297 Fig. 10.2. Gairezi schist veined by quartz, very fine schistosity expressing itself as silky lustre under sunshine, folded, with crenulation cleavage in the axial plane. Village road to Gairezi. (0507904/ 8064042). Scale bar is 10 cm..................................................... 298 Fig. 10.3. Section in horizontal roadside ditch outcrop showing thin-skinned stacking of Archaean basement, Gairezi and Báruè lithologies. The current attitude of the sinistral shear between the blocks I and III is subvertical. (0529791/7914931). ..................... 300 Fig. 10.4. The roadside ditch outcrop of Fig. 10.3. The outcrop along the ditch represents the shear zone (a part of it) between the Báruè Complex in the east (to the right in the picture) and the Archaean craton margin in the west, with local covers of the Gairezi schists. The hill at the left background is an isolated block of Archaean granitoid surrounded by Gairezi schists, probably with tectonic contacts. N of the Vanduzi village (0529791/ 7914931)........................................................................................ 301 Fig. 10.5. Sheared Gairezi quartzite in the core of the shear zone of the previous two pictures. Width of number plate is ~10 cm................................................................................ 301 Fig. 10.6. Intensively deformed garnet-muscovite-biotite schist of the Gairezi Group. Metamorphic grade is that of lower amphibolite facies. Serra Nhamahono (0504242/ 7976586). Scale bar is 10 cm...................................................................................... 306 Fig. 10.7. Microphotograph of post-metamorphically deformed garnet-muscovite-biotite schist of the Gairezi Group. Old foliation is overprinted by crenulation cleavage. Thin Volume 2 Page 60 section is from the schist in Fig. 10.6. (0504242/ 7976586). Width of photo is 20 mm. ..................................................................................................................................... 306 Fig. 10.8. Intensively melted garnet-biotite gneiss in the Báruè Complex. Metamorphic grade is intermediate between amphibolite and granulite facies. Rio Nhangoma (0604113/8078811). Scale bar is 10 cm. .................................................................... 307 Fig. 11.1. Reconstruction of Gondwana after Jacobs and Thomas (2004). Key: ANS = Arabian-Nubian Shield; EAAO = East Africa-Antarctica Orogen; M = Madagascar; Da = Damaran; Z = Zambezi Belt. ................................................................................... 310 Fig. 11.2. Gondwana reconstruction after Lawver et al. (1998). Distribution of lithologies reflecting consuming/collisional lithospheric margins. Ophiolite body south of Nyika Plateau (Zambia) has been added (adapted from Grantham et al. 2003 with updates). ..................................................................................................................................... 313 Fig. 11.3. Reconstruction of Rodinia after Li et al. (1995), Dalziel (1997) and Hoffman (1999) showing mountainbelts formed during the Grenville Orogenic Cycle and the formation of juvenile crust (1.35 – 0.9 Ga). Key: M = Madagascar, S = Sri Lanka, KAL = Kalahari craton, N = Natal, A = Areachap and associated terrains, Fk = Falkland Islands, H = Haag Nunatacks. L = Lurio belt, K = Kibaran belt and NET = NE Tanzania................................................................................................................ 319 Fig. 11.4. Gondwana reconstruction after Lawver et al. (1998). Ages and locations of various major structural/tectonic features (e.g., major thrust belts, shear zones) showing direction of tectonic transport and shear sense. Key: PC = Palgat-Cauvery Shear Zone; RC = Rayner Complex; A = Achankovil Shear Zone; GC = Grunehogna cratonic fragment; H = Heimefrontflella; RF = Ranotsara Shear Zone; U = Urfjell; N = Namama Shear Belt; O = Orvinfjella Shear Zone; M = Manica Shear Zone (adapted from Grantham et al. 2002). ....................................................................................... 324 Fig. 12.1. Monarch gold mine, production plant. .................................................................. 328 Fig. 12.2. Two gold mineralised shear zones in the Manica area: Mutambarico and Andrada. Map by courtesy of the Pan African Resources Company, March 2006.................... 329 Fig. 12.3. Excavating for gold in Bandire. Weathered mica gneiss with horizontal quartz veins. ........................................................................................................................... 330 Fig. 12.4. Gold bearing quartz veins in weathered mica schist near Mavita, Rotanda. Gold occurs in the white, tightly folded quartz streaks. ...................................................... 330 Fig. 12.5. Artisanal excavation for gold-bearing quartz veins at Teçequire Mountain, south of Serra da Gorongosa. The quartz veins are horizontal and can easily be removed from the weathered bedrock. ............................................................................................... 331 Fig. 12.6. Banded iron stone in Honde. Batch is 10 cm long. ............................................... 333 Fig. 12.7. Hilltops consisting of titano-magnetite-rich lenses surrounded by gabbro and anorthosite in Machédua, Tete Province..................................................................... 333 Fig. 12.8. Stone quarry south of the town of Tete. Small-scale artisanal work is ongoing. .. 335 Fig. 12.9. Nharuchonga quarry along the Beira-Chimoio road. ............................................ 335 Fig. 12.10. Carbonatite and felsic volcanic rocks are quarried for railway aggregate at Xiluvo. ..................................................................................................................................... 336 Fig. 12.11. Aggregate quarry in operation at Matsinho. Rock is a hard, quartz rich gneiss.. 336 Fig. 12.12. Dormant quarry, south of Chimoio town, DS 1833, 547254/7882478, hornblende gneiss with folded quartz and pegmatite veins is quarried for aggregates. ................ 337 Fig. 12.13. Ceramica Villa Pery excavation for saprolitic clay in the Cafumbe area (DS 1933, 559331/ 7889311). ...................................................................................................... 338 Fig. 12.14. Monte Fema carbonatite (SDS 1633, 53803/8223684). ...................................... 342 Fig. 12.15. Quartz veins with greenish fluorite at Dombe. Scale bar is 8 cm........................ 343 Volume 2 Chapter One Page 61 CHAPTER 1 INTRODUCTION 1.1. BACKGROUND OF THE PROJECT The mining policy of the Government of Mozambique focuses on the promotion of private investments to develop the mining sector, based on a favourable geological environment and mineral potential of the country. As part of this policy, the Ministry of Mineral Resources (Ministério dos Recursos Minerais, MIREM), through the National Directorate of Geology (Direcção Nacional de Geologia, DNG), fosters the development of the national geo-scientific infrastructure in support of mining investments promotion and the sustainable social and economic development of the country. The availability of basic geological information is an important parameter to promote investments as well as an essential tool for planning of construction of infrastructure and for natural disasters mitigation. Mozambique has made great efforts in developing the basic geo-scientific infrastructure of the country. Geological mapping has been carried out since colonial times and extensive geophysical, geochemical, and geological surveys have been carried out since independence. The archives of the DNG contain an impressive wealth of geo-scientific information. However, most of this information is now outdated in reference to the technology used and the geological concepts supporting mineral exploration. Moreover, the geological mapping carried out in the decade before independence (1975) and during the period of civil strife was limited by the difficulties to carry out fieldwork. Therefore, it is of utmost importance to complete and modernise the national geo-scientific infrastructure. To achieve this the Government of Mozambique has implemented the Mineral Resources Management Capacity Building Project (MRMP), as part of a major international programme. The main objective of the mapping programme of the MRMP is to revise previous mapping in certain areas and to upgrade the quality of geological maps in others, to provide a consistent coverage in terms of quality throughout the Mozambican territory. The geological mapping is based on modern lithostratigraphic principles and therefore the objective of this programme is also to resolve stratigraphic problems, provide good geochronological control data and resolve structural problems. 1.2. HISTORY AND SYNTHESIS OF PREVIOUS WORK Holmes (1918) published the first contribution on the general geology of Mozambique. Other pioneer studies include Anthoine and Dubois (1925) and Andrade and de Freire (1929). Geological investigations continued during Portuguese colonial rule (Longyear Company, 1955a,b; Freitas, 1957, 1959), culminating with a monography on the geology of Mozambique by Afonso (1976). After independence in 1975 the DNG has launched various geo-scientific programmes in collaboration with foreign and international organisations, including the BRGM (France), Bulgargeomin (Bulgaria), Aquater S.p.A. (Italy), Hunting Geology and Geophysics Ltd (UK) and UNDP. These programmes were mainly in the fields of regional geochemistry and airborne geophysics. Mineral resources of the country were Volume 2 Chapter One Page 62 studied in late 1970’s and beginning of 1980’s by the Swedish iron ore producer LKAB (iron ores, tin and coal). At the same time many of the industrial mineral occurrences were investigated by the Geological Institute in Belgrad (Brodoimpeks-Geosavod), from former Yugoslavia (Brodoimpeks, 1983,1984 and 1985). Between 1981 and 1984 Hunting Geology and Geophysics Ltd initiated a new phase of geological investigations (Hunting, 1984). They carried out a comprehensive mineral exploration and reconnaissance geological mapping project, covering the Tete province and parts of Manica, Sofala and Zambézia provinces, under the aegis of the Mozambican Government. The project was successful in its main objectives of setting the geological context for known mineral deposits in a large area of basement rocks, establishing an inventory of mineral occurrences and in defining priorities for future follow-up work. The French BRGM surveyed approximately at the same time (1980 – 1984) the northern part of Mozambique resulting in novel ideas comprising the existence of allochthonous nappes and Klippen in the Mozambican Belt. It further resulted in the publication of a new geological map of Mozambique – scale 1:1 000 000 – that also showed new insightsinto the geology of the Tete area (Pinna et al. 1986, 1987; Pinna and Marteau, 1987). An essential difference with former studies was the general acceptance of geologic- tectonic rejuvenation of almost all rock sequences. The main part of the crystalline basement, including the (ultra-)mafic intrusions, i.e., the Atchiza, Nhantreze and Tete Suites shifted from the Neoarchaean/ Palaeoproterozoic to the Mesoproterozoic/ Neoproterozoic. The crystalline basement was subdivided, in accordance with the BRGM map, into three periods: • Archaean and Palaeoproterozoic units along the Zimbabwean border, composed of greenstone belts and a granite-gneiss terrains. • Mesoproterozoic-Neoproterozoic (Irumide and Mozambican Tectonic Cycles) units that are subdivided into two litho-units: o Orogenic units that were formed at the end of the Precambrian B and the beginning of the Precambrian A (sensu BRGM map, 1987), which were believed to correspond with a projected elongation of the Irumide Belt of Zambia and Congo (1300 Ma) and subjected to Mozambican tectogenesis (1100 – 850 Ma). The Mozambique Belt was assigned to these units and indicated on account of ages of the magmatic sequences (charnockites, enderbites, anorthosites at 1070 – 900 Ma, and migmatites and granitoids at 1100 – 900 Ma). o Supracrustal sequences – granulites and (blasto-)mylonites at 1000±150 Ma – that include allochthonous as well as autochthonous complexes. • Late Neoproterozoic units (Pan-African Tectonic Cycle, 850 – 450 Ma, as well as the Katangan Tectonic Cycle, 850 – 600 Ma), marked by intensive tectonism, followed by Pan-African intrusions (500±100 – 410 Ma). The BRGM map also presented the most important source for the stratigraphic sub- division of the rock units that underlie the territory of Mozambique. The ‘Provisional Stratigraphic Scheme of Mozambique’ (Lächelt et al. 1997) and the ‘Stratigraphic Correlation Scheme’ compiled on behalf of the SADC countries (Hartzer, 1998) mainly follow the exposition of the 1987 BRGM map. A review of the mineral resources of Mozambique is contained in Afonso and Marques (1993) and Afonso et al. (1998). All existing information Volume 2 Chapter One Page 63 on the geology of Mozambique has been recently compiled and reviewed in an impressive monograph by Lächelt (2004). Critical in understanding poly-metamorphic units and geodynamic development of the Mozambique basement are correct radiometric age determinations. Prior to the Hunting (1984) and BRGM studies these were overwhelmingly K-Ar and Rb-Sr whole rock ages. These gave mixed or, at best, cooling ages. New geochronological methods (SHRIMP, U-Pb zircon, Sm-Nd and Ar-Ar) have been developed since and produce far more reliable results. The present Project (2002 – 2006) builds on the older results, in particular the Hunting (1984) surveys (see also Barr et al. 1986; Barr and Brown, 1988) in parts of the area covered by the present Map Explanation. For the remaining portions information has been drawn from the geological reports in Direcção Nacional de Geologia (DNG) in Maputo. The present Project endeavours previous studies to apply correct lithostratigraphic nomenclature with formation names as the primordial lithostratigraphic unit. Strictly speaking, this requires the selection of a ‘type-locality’ with an official topographic name for each formation. This task falls outside the mandate of the Project. Consequently, most formation names have to be considered as informal and provisional4. The upgraded geological maps produced by the GTK Consortium during the Project have benefited optimally from new GIS-based image processing technology, new airborne data and 36 new geochronological age determinations. 4 In agreement with the Client ‘Formation*’ will be used to indicate an informal use. Volume 2 Chapter Two Page 64 CHAPTER 2 METHODOLOGIES AND PROCEDURES 2.1. INTRODUCTION The scope of the work did not allow for comprehensive traditional field mapping on, for example, 1:50 000 scale and subsequent compilation of the results on 1:250 000 scale. Modern digital mapping methods have been used, based on the interactive interpretation of merged satellite imagery and airborne geophysical data (magnetic and radiometric surveys), digitally merged aerial photographs, existing geological maps and limited field verification. The revised and upgraded maps produced by the GTK Consortium are not static, printed maps that have to last for 15 to 20 years, but dynamic products that can be up-dated any time new data become available and adapted to requirements of the end-user (thematic maps). Project implementation methodology included execution of a group of tasks relevant to the mapping, as well as a programme of training for DNG staff. Preparation of this new generation of upgraded geological maps has been conveniently subdivided into four phases of which the flow sheet is outlined in Fig. 2.1: • Preparation phase: This included collection and quality assessment of all available relevant data and documentation; acquisition of equipment and material; organisation of logistics (transport, setting up field camps, mobilisation of field teams, etc.). • Compilation and synthesis of the existing geological information: Based on existing geological maps (when available), satellite imagery, airborne geophysical data and aerial photographs, first drafts of up-dated geological maps and legends were prepared. Based on these, field verification, mapping and sampling programmes were planned and executed. • Mapping phase: Field traverses were selected in function of accessibility and focusing on problem areas, i.e., areas where the geology based on interpretation of satellite imagery and airborne data deviates from the interpretation as presented in the existing geological maps. Field verification also comprised sampling of rock specimen for future reference. Part of the samples has been selected for petrographic, litho-geochemical or geochronological studies and the rest stored in DNG. • Preparation of the final products: Preparation of digital map products and databases including final map legends. Volume 2 Chapter Two Page 65 P ha se II : G eo lo gi ca l R ev ie w a nd C om pi la tio n of M ap D at a P ha se II I: V er ifi ca tio n an d Fi na l D ig ita l P ro du ct s Ph as e I: D at a G at he rin g an d Pr ep ar at io n Interpretation of satellite images and aerial photographs Geological data interpretation Geophysical data processing Compiled geological mapsCompilation of geologicalfield maps Field survey (geological mapping) Geolocical data Geophysical data Processing of the satellite images and aerial photographs DML 1st version Satellite images and aerial photographs Base data DEM Databases - Field geological db for observations - Result of analyses - Description of lithology - Mineral Occurrence db - Lithostratical classification db Laboratory studies (Petrographic, geochemical and geochronological studies) Technical reports (Notes to geological maps) Preparation of the geological and photograph databases and ArcInfo coverages Preparation of the Final Legend Production of the Geological maps and observation database Preliminary Products and Reports - draft geological maps Digital geological maps and databases on CDROM Geological and mineral occurrences data processing Final geological map printoutsDML - Final version Flow sheet of geological mapping Fig. 2.1. Outline of flow sheet of different phases of the Project. Volume 2 Chapter Two Page 66 2.2. EXISTING DATA This mainly included geological maps on different scales, aerial photographs, satellite imagery (Landsat-7 ETM) and airborne geophysical data available in the archives of the DNG. Part of the airborne geophysical data was gatheredduring the Project period under a parallel programme. The GTK Consortium has merged the existing and newly acquired airborne geophysical data. Use was made of digital elevation data from the Shuttle Radar Topographic Mission (SRTM) and ASTER VNIR scenes. The quality of the existing geological maps was variable. Maps were available as printed copies or only as blue prints. Some parts of the territory of Mozambique were only covered by a photo-geological interpretation or had remained unmapped. GPS track logs collected by the Consortium during Project implementation demonstrated that the topographic base of the existing geological maps was generally below modern requirements. They showed non-systematic offsets in the order of 200 to 300 metres. 2.3. COMPILATION AND SYNTHESIS Within the scope of the Project the following activities have been carried out: • Compilation and scanning of existing analogue map products (topographic and geological) into a seamless digital database. • Re-interpretation and compilation of the map legends in terms of the new lithostratigraphic framework of Mozambique. • Preparation of a new set of up-graded geological maps, based mainly on an interactive interpretation of composite imagery based on merged remote sensing and airborne geophysical datasets and comparing with existing maps. 2.3.1. Digitising and Compilation of Existing Geological Maps The 1:1 000 000 scale geological map of Mozambique compiled by BRGM (1987) and the 1:250 000 scale Hunting (1984) map sheets have been digitised and the polygons were coded correlatively as far as possible. The BRGM map was the more recent of the two and represented more developed concepts vis-à-vis regional correlation of lithostratigraphic units and therefore contributed more to the preliminary legend of the map upgrades (first draft). The Hunting (1984) and BRGM (1987) almost similar versions of the geology of the LOT 2 area were given common colours for comparison and to use them separately at different occasions. Digital provisional geological maps (first draft), based on the existing Hunting (1984) map sheets and the geological interpretation of enhanced satellite imagery and airborne geophysics were prepared of the whole LOT 2 area. Line codes used in the provisional geological maps followed the line coding of the published geological maps, including observed, inferred and probable lithological contacts, reverse, normal and strike-slip faults, foliation trends and unconformities. Dykes were digitised as polylines and were therefore not included in the Arc-mode topology. Polygons were initially coded according to the legend of Volume 2 Chapter Two Page 67 the Hunting (1984) geological maps. Additional coding was applied to geological features inferred from the interpretation of airborne geophysical and remote sensing data sets. During the process of naming the polygons, it was found that many polygons in the Hunting (1984) compilation maps had no label. In most cases, similarity in size (usually small) and shape of such polygons left little doubt as to which unit the polygon should be assigned to. Only in a few cases several alternative interpretations were possible. These polygons were ‘earmarked’ for validation during later interpretation of Landsat imagery. Most linear geological features (ca. 95%) in the Hunting (1984) maps were encoded as inferred features, suggesting that the fieldwork conducted by the Hunting project provided only a few possibilities to trace lithological contacts along strike during geological field mapping. Structural elements, like foliation and bedding elements were also extracted from the Hunting (1984) geological maps. The line elements were digitised to recompile the structural information in tabular format (strike and dip at every point). The line segments were digitised using the right hand rule so that the dip orientation was taken into account. 2.3.2. Satellite Imagery Satellite images (Landsat-7 ETM) had been collected and registered by CENACARTA, Maputo, in UTM Zone 36S projection, Clarke 1866, Tete Datum, using existing topographic maps as reference data. The images have been selected from different years and seasons in order to obtain scenes with no or minimal cloud coverage. Consequently, colour differences between different scenes could not be avoided. The scenes covering LOT 2 were geo- referenced and reformatted into mosaics corresponding with the 1:250 000 scale topographic map sheets. The layout of the Landsat TM scenes and the mosaics, corresponding with the 1:250 000 topographic map sheets, is shown in Fig. 2.2. GPS track logs collected by the Consortium, using a handheld unit (Garmin 12XL), revealed offsets that amounted up to systematic shifts of 200 – 300 meters, predominantly in northing. Given the fact that both the track logs and ETM scenes were registered on the same projection and ellipsoid, the systematic displacements were due to the fact that the transformation parameters between the Tete and MOZNET data were initially not known and, consequently, set to zero. Subsequently, the required datum transformation became available to the Consortium through a technical report on the adjustment of the old geodetic network of Mozambique by Norconsult International (1998). The recommended Bursa-Wulf (or Helmert) transformation parameters for the project area are presented in Table 2.1. Due to GIS software limitations and processing efficiency, the rotation and scaling factors were ignored in the datum transformation. This appeared reasonable and the discrepancies were reduced well below the accuracy of single handheld GPS units. All TM scenes covering the LOT2 area were re-sampled to fit the MOZNET datum using bi-cubic re-sampling. The re-registration of Landsat scenes using the GPS stations collected during the fieldwork improved the registration and there was no need to apply datum transformations afterwards. Although the mismatches between GPS track logs and the TM scenes were reduced to about 100 meters, non-systematic distortions, probably induced by poorly chosen ground control points of previous geodetic surveys, are still present. It must be noticed that these errors can only be resolved by collecting additional GPS control points. Volume 2 Chapter Two Page 68 Table 2.1. Bursa-Wolf transformation parameters and root mean square errors valid for provinces of Sofala (north of Beira corridor), Manica, Tete and Zambezia computed by Norconsult International on the basis of 32 common points in the Tete and MOZNET data (Norconsult International, 1998). Parameter Value R.M.S. Unit 1 Shift dX -73.472 16.9006 Metres 2 Shift dY -51.66 20.4291 Metres 3 Shift dZ -112.482 24.289 Metres 4 Rotation about X -0.95259 0.6613 " (arc seconds) 5 Rotation about Y -4.60029 0.6928 " (arc seconds) 6 Rotation about Z 2.368262 0.6606 " (arc seconds) 7 Scale 0.585646 2.4102 Parts per million Fig. 2.2. Layout of the Landsat-7 TM scenes and mosaics, corresponding with 1:250 000 topographic and geological Degree Sheets over the LOT2 project area (Image by E. Schetselaar). Volume 2 Chapter Two Page 69 2.3.3. Airborne Geophysics Available air-borne geophysical data comprised the old (e.g., Hunting, 1983; other data) and the recently collected Fugro (2003) data (Fig. 2.3). The Hunting data was received as contour maps and as digital grids. The grid data included total magnetic field, potassium, thorium, uranium channels and total count. The grids were useful for a quick assessment on how to exploit the data in map production and geological mapping. The Hunting airborne geophysical data were seriously hampered by the effects of flight-based level shifts and micro-levelling errors. This restricted their use for digital classification and other image processing applications. Hence, the line data from the Hunting geophysical surveys were recoveredas ASCII line data from the GEODESA5 archives at ITC to investigate if these levelling errors could be reduced to produce better grids for geological interpretation. The recovery and processing of the line data, proved to be effective in: • Reducing significant level shifts of the Th channel in the northern block of the survey area. • Reducing the micro-levelling errors of the aero-magnetic data. The U channel, suffering from similar flight-based level shifts, could not be improved since the shifts were ‘smeared out’ over adjacent flight lines, apparently induced by previous attempts to correct level shifts by filtering the data. The new preliminary airborne geophysical survey data (Fugro, 2003) were received through DNG in September 2003. The data suffered from the following shortcomings: • Incomplete overlap between older and new surveys. • Absence of calibration details and values of Cosmic Stripping Ratios and Aircraft background. • Absence of height attenuation coefficients. • No stripping ratios and their calibration details. • No specific details on data correction and reliability (% errors) in areas of extreme topography. • Presence of a large number of negative values in all radiometric channels in areas of flat topography (in database and grids). The line data of K, eTh, eU, TC and the total magnetic field channels were registered on the MOZNET datum and gridded on 200 meter cells using a minimum curvature gridding algorithm. Reduction to the pole, vertical derivative and residual magnetic field grids were computed from the total magnetic field grid in order to further facilitate the interpretation of regional geological units and structures. 5 GEODESA (1996 – 2000) was the name for an Institutional Strengthening project, addressing 12 Geological Survey organisations in eastern and southern Africa and the Mineral Coordination Unit of SADC (Lusaka) and co-implemented by SEAMIC (Dar es Salaam), ITC and TNO-NITG (the Netherlands). Volume 2 Chapter Two Page 70 Fig. 2.3. Map of Mozambique showing survey blocks covered by air-borne geophysics. Volume 2 Chapter Two Page 71 Tests with the preliminary Fugro magnetic grid show that it can be successfully merged with the old Hunting data without applying any regional correction other than IGRF removal. Overlapping areas ‘blend‘ well to give continuity of short-wavelength features across the boundary, although the difference in resolution of the two grids is apparent. The latter is due to three factors: (a) lower flying height (100m versus 120m), (b) greater down- line sampling (0.1s versus 1s) and (c) improved navigational accuracy (differential GPS versus Doppler + visual). Regression analysis of the overlapping parts of the grids for the gamma-ray spectrometry data cover almost the full dynamic range and provide reasonable, if not perfect, equations for back calibration of the older data. The calculated sensitivity constants are not too far from what would be expected for the crystal volume and flying height used in the older survey but they may be a little biased by the present number of negative values in the new survey. The difference between the expression of short-wavelength anomalies in the 1983 and 2003 aeromagnetic survey data are illustrated in Fig. 2.4. In the 2003 area, short-wavelength anomalies are resolved from each other and appear sharp and continuous in the image. In the older survey data, evidence of short-wavelength features is apparent but individual anomalies and trends are not always clear. Fig. 2.4. Comparison of the spatial resolution of short-wavelength magnetic anomalies from the 1983 (right) and 2003 (left) airborne surveys. The white line marks the boundary between the two surveys. Volume 2 Chapter Two Page 72 2.3.4. Digital Enhancement of Landsat 7 TM Scenes Several enhanced products were derived from the Landsat-7 scenes to support geological interpretation. Enhancement methods include linear and interactive contrast stretching of single bands and colour composite images and principal component analysis. In selecting the band triplets for generating colour composite images from a total of twenty possible combinations of the six 30-meter bands, the discrimination of rocks (or related soil cover) was considered an important factor in selecting an optimal triplet for lithological units. Another less important factor was the possibility to detect lithological variations indirectly and present these broad-scale geobotanic relationships in natural vegetation communities. The band combinations (Red = TM7, Green = TM3, Blue = TM1) and (Red = TM7, Green = TM3, Blue = TM2) provided attractive colour composites, particularly for Landsat scenes acquired over relatively dry areas or during dry seasons. Both band triplets utilise strong and broad absorption features of carbonate and hydroxyl-bearing minerals between about 2.2 - 2.4 micron, a range overlapping with the wavelength position of TM7. In addition, these band combinations give information about the spectral slope between 0.4 and 0.7 micron (the visible range comprising TM1, TM2 and TM3) that is diagnostic to iron- oxide minerals (Goetz et al. 1983). Good exposures of carbonate and mica rich rocks typically appear in shades of blue on such colour composites, whereas rocks with red alteration, due to high contents of iron-oxides, appear in yellow to reddish tones. The use of these diagnostic spectral properties of rocks and derived soil material is obviously hampered in areas with a moderate to dense vegetation cover. In these areas, subtle geo- botanic relationships between natural vegetation communities and their substrate may be employed instead, by using band combinations that include the prominent and steep slope between the visible red and near infra-red range of the green vegetation spectrum. Hence, the combination (Red = TM 4, Green = TM7 and Blue = TM3) was used as an additional combination to maximise spectral discrimination of lithological units in areas with higher green biomass densities. Examples of colour composite images generated from the band combinations are shown in Fig. 2.5. Principal component analysis (PCA) was used to exploit another important diagnostic image characteristic for discriminating lithologies. In short, PCA generates a new orthogonal set of bands along the lines of maximum variance among the original bands (Curran, 1985). This effectively minimizes redundant information, particularly because the original bands tend to be highly correlated. The new bands, called principal components, are ordered according to their percentage of variance. Thus the highest percentage of the total variance is mapped on the first principal component, whereas the lowest percentage of the total variance, often considered as noise is mapped on the last principal component. The first principal component contains the information that is common among the multi-spectral bands, which is usually strongly related to the scene illumination. As a result PC1 provides optimal enhancement of relief features provided by the sun illumination of the scene, which may be exploited for outlining lithological units on the basis of their variable geomorphologic expression. PC1 images, for example, appeared to enhance the differences between granites and intrusive mafic intrusives and the differences among felsic suites themselves, as well as the more subtle small-scale linear patterns reflecting differences in the degree of penetrative foliation/bedding fabric in various plutonic, metamorphic and sedimentary rock units. Volume 2 Chapter Two Page 73 Fig. 2.5. Subset colour composite images for different band combinations (Images by E. Schetselaar). 2.3.5. Geological Interpretation of Landsat TM Scenes The digital compilation of the Hunting (1984) geological maps wasemployed as the basis for the geological interpretation. The codes of the interpreted line work that form the polygon boundaries of lithological units refer to normal, unconformable and fault contacts of various nature. The source of these new polylines could be differentiated from the older line work derived from the digitised Hunting (1984) geological maps. The Hunting (1984) digital geological map compilation was superimposed on enhanced geophysical grids, remote sensing images, integrated image products of gamma-ray spectrometry and Landsat data and merged digital images of digital geological map documents of neighbouring countries and Landsat colour composites. The main objectives of the interpretation were: • Resolve mismatches between adjacent map sheets of the Hunting (1984) geological coverage • Trace geological structures and lithological units from geological maps of neighbouring countries, particularly Zimbabwe, where maps show more litho- logical and structural details • Identify discrepancies between the Hunting (1984) geological maps and geological features inferred from the enhanced image products • Resolve intersecting boundary conflicts between image-inferred and map digitised geological features Volume 2 Chapter Two Page 74 2.3.6. Integrated Enhancement of Radiometric and Landsat TM Scenes Previous studies have shown that integrated enhancement of remote sensing and airborne geophysical data sets may yield significant geological information, not obvious in enhanced products of the individual data sets (Harris et al. 1994). The integration of gamma-ray spectrometry grids and satellite imagery of higher spatial resolution in image products, in particular, has proven useful to enhance geological information. Such integrated enhancements allow the interpretation of the geochemical information contained in the gamma-ray spectrometry channels in the context of structural features, such as lithological contacts, faults and foliation trends (Wilford et al. 1997; Schetselaar, 2000). The digital processing methods used to generate integrated enhancements are all based on the principle of mapping co-registered grids/images on distinct perceptual attributes of human colour vision using image algebraic operations. In practice, the geo-science data sets are first co-registered on a common pixel/grid cell size, after which they are ‘fused’ in colour composite images by the application of an algebraic algorithm to the pixels. Composite enhanced image products of geophysical grids and Landsat TM scenes were prepared to aid the extraction of complementary geological information. Grids of K, eTh and eU were registered with Landsat-7 band 5 on 50-meter pixels and integrated using the HDF transform (Chavez et al. 1991): Red = (K + 3.TM5)/4 Green = (eTh + 3.TM5)/4 Blue = (eU +3.TM5)/4 The ternary/TM5 image data appear to be an ideal enhancement for geological interpretation as it allows interpreting the geochemical information of the gamma-ray spectrometry channels in the context of structural features, such as lithological contacts, foliation trends and various erosional landforms. In other occasions, merging of remote sensing and airborne magnetic data produced powerful imagery for geological interpretation. A subset of the composite image is shown in Fig. 2.6. Optimal image products for geological interpretation can be summarised as follows: • IHS colour composite images of gamma-ray spectrometry channels (K, eTh, eU) and high-passed filtered Landsat TM band 7, co-registered on 30 metre pixels. Chromatic (hue and saturation) contrasts provide lithological differentiation (mostly of igneous rocks) whereas image texture allows differentiating various sedimentary units. High spatial resolution intensity from Landsat provides, in addition, structural details to differentiate foliated from non-foliated rocks. • Landsat TM colour composites, bands 7, 3 and 1, provide high spatial resolution and multispectral details to further confirm and better outline the geometry of units inferred from the IHS composite images. • First vertical derivative of pole-reduced magnetic data, further enforces geological significance of lithological differentiation and shows complementary structural details (particularly dykes). • ASTER VNIR colour composite images (15 metre spatial resolution) for detailed interpretation of geological boundaries and structures and for tracing tracks/roads. Volume 2 Chapter Two Page 75 Fig. 2.6. Image clips to illustrate the effects on integrated enhancement of Landsat TM and gamma ray spectrometry channels. Left original ternary radiometric map, right ternary radiometric map ‘sharpened’ with Landsat TM5. The black polygons correspond with (ultra-)mafic rocks of Atchiza Suite (Images by E. Schetselaar). 2.3.7. Digital Interactive Interpretation of Compiled and Processed Data Sets Geological interpretation work of the mapping area was conducted mostly interactively using GIS functionality. The digital approach facilitated an interactive enhancement of the various remote sensing and airborne geophysical datasets and made it possible to compare the digital compilation of the geological maps prepared by Hunting (1984) with any enhanced product at any scale. The interactive overlay of the digital compilation of the Hunting (1984) geological maps on various enhanced image data proved to be useful for matching the lithostratigraphic map units with image characteristics on which basis the lithological units were recognised on the enhanced imagery. It is obvious that the relationships between lithostratigraphic concepts and contrasting image characteristics, such as tone, texture and patterns are never a one-to-one relationship. Several units on the map may match with only one identifiable unit on the enhanced imagery or vice versa. As a result, in places with good field control and lack of diagnostic image features, generalisation towards areas with less or no field control is unavoidable. It became clear during the integrated geological interpretation that in the areas with no or few field observations many additional geological features could be identified from the compiled remote sensing-airborne geophysical imagery (Figs. 2.7, 2.8. and 2.9). This was particularly true for the area south of Changara where virtually no fieldwork had been conducted. On the other hand, for some areas north of Lake Cabora Bassa, the Hunting compilation contained geological details that could not be identified on any of the compiled data sets. Of the six lithological units recognised by detailed field studies of the Fíngoè Group, for example, only three units (marble, quartzite and schist) could be detected during the interactive digital interpretation. The envisaged geological coverage also includes a provisional mineral map for each of the 1:250 000 scale maps, accompanied by a geo-referenced inventory of mineral deposits and occurrences that have been captured in an electronic database, such as MS Access or Corel Volume 2 Chapter Two Page 76 Paradox. The preparation of these mineral maps and the database has taken place simul- taneously with the geological mapping. Fig. 2.7. Lithological units of the Rushinga Group from geological maps of the Zimbabwe border region can be traced on a Landsat TM colour composite into Mozambique. Pink lines show the Hunting (1984) compilation, blue lines the Landsat interpretation prepared by the Consortium (Image by E.Schetselaar). Fig. 2.8. Complex fold structures and shear zone (green dotted line) in mafic and quartzo-feldspathic units of the Báruè Complex. Pink lines show the Hunting compilation, blue lines the Landsat interpretation prepared by the Consortium (Image by E. Schetselaar). Volume 2 Chapter Two Page 77 2.4. FIELD VERIFICATION AND MAPPING Field verification and mapping took placeby a team of field geologists from the Consortium, in close cooperation with geologists and technicians from the DNG, during three consecutive field seasons (March – November 2003, 2004 and 2005) along pre-selected itineraries in function of access and complexity of geology from different base camps. More remote areas were surveyed from fly camps. Transport was generally by 4 x 4 traction vehicles, ATV’s, motorbikes and foot traverses. Helicopter transport was used for field verification in the least accessible and most remote areas. Fig. 2.9. IHS composite image of gamma-ray spectrometry channels and Landsat TM band 7 of the Báruè Complex (on the right). Red, darker areas are interpreted as more mafic gneiss units, whereas the green (Th rich) units appear to correspond to felsic units, possibly including late granitoid intrusives. Pink area in the upper left corner corresponds to lithologies of the Rushinga Group (Image by E. Schetselaar). A total of ~ 7600 GPS-controlled field observations were entered into field forms and, subsequently, together with representative digital photograph(s) of the outcrop(s), entered as .pdf files into the DML and subsequently into the observation database. All observation points and attached data have also been stored in a GIS database for preparing work sheets. Rock samples collected during field verification have been archived, photographed digitally and stored at the DNG regional or head offices. 2.5. LABORATORY WORK Laboratory work comprised (1) petrographic study of selected thin sections, (2) geo- chronological study of selected rock samples, (3) litho-geochemical study of various rock types and (4) microprobe analysis of minerals of selected polished thin sections. Volume 2 Chapter Two Page 78 2.5.1. Petrography Rock samples collected during field verification have been archived, photographed digitally and transported to DNG sample storage facilities. The digital photographs have been stored in the DML. Out of nearly 4000 samples, 254 (total 533/Lot 2) have been selected for thin section preparation and petrographic study. The selected samples were first sent to DNG in Maputo for cutting and storage of a reference sample. The thin sections have been prepared at the CGS laboratories in Pretoria, South Africa. Sample locations for which a petrographic slide has been prepared are shown in Fig. 2.10B. Fig. 2.10. (A) Sample locations for geochemical analysis, (B) Sample locations for petrographic studies. 2.5.2. Geochronology Limited geochronological data from Mozambican rocks is contained in Sacchi et al. (1984), Barr and Brown (1987), Bigioggero et al. (1990), Costa et al. (1992, 1994), Pinna et al. (1993), Manhiça (1998), Evans et al. (1999), Jamal et al. (1999) and Manhiça et al. (2001). Grantham et al. (2002) has collected the above, published geochronological data, together with similar data from neighbouring areas. In addition to previous age determinations, a total of 36 representative rock samples, collected from Lot 2 area by the field teams, have been dated by the GTK Consortium. The results are presented in Mänttäri (2005a,b and 2006) and reproduced for the area covered by this Map Explanation in App. 2. Sample locations for age determinations are shown in Fig. 2.11 and a summary of the geochronological results is presented in Fig. 2.12. Three geochronological methods have been used by the Consortium: (1) convential TIMS U-Pb dating, (2) SHRIMP U-Pb dating on zircons and (3) Sm-Nd mineral dating. These methods are described in App. 2. Volume 2 Chapter Two Page 79 The age results from the Mozambican rock samples dated by the Consortium are collected in Table 2.2. The probability density plot with histograms of all the dated magmatic ages including also the results from report part 1/2) is presented in Fig. 2.12. Pan-African metamorphism at ca. 520 Ma was observed from many samples. In sedimentary rocks Archaean zicons up to 3.1 Ga were observed. Fig. 2.11. Sample locations for geochronological studies from Lot 2 area, Volume 2. Volume 2 Chapter Two Page 80 0 1 2 3 4 5 6 7 0 400 800 1200 1600 2000 2400 2800 3200 Age / Ma N um be r R elative probability Magmatic ages from 30 Mozambiquean rock samples Fig. 2.12. Histogram showing magmatic age peaks as achieved from GTK Consortium datings within Lot 2 area. Volume 2 Chapter Two Page 81 Table 2.2. Summary of isotopic age determinations from Mozambique samples, Map Explanation Vol. 2 area. 2.5.3. Lithogeochemistry Out of the total 352 analysed rock samples 175 come from the map explanation Volume 2 area (Fig. 2.10A). The samples were analysed using high precision methods and applying state-of-the-art instrumentation (XRF, ICP-AES, ICP-MS) in GTK laboratories in Finland. Major, minor and many trace elements have been determined using the XRF pressed powder pellet method. Where desired the XRF results have been supplemented with ICP-AES or ICP-MS analyses (e.g., rare earth elements) after total digestion of the sample (HF-HClO4- digestion). Carbon and Loss on Ignition (LoI) have been carried out where needed. In special cases also Fe (II), H2O+ and H2O¯ have been determined. The results of chemical analyses are presented in table format in App. 3 and in several classification and discrimination diagrams located in relevant sections of the text. The following diagrams have been used for classification of volcanic and plutonic rocks and estimation of geotectonic setting: • (Na2O+K2O) vs. SiO2 (TAS, Le Bas et al. 1986) • SiO2 vs. Zr/TiO2 (Winchester and Floyd 1977) • (Na2O+K2O)-FeOt-MgO (AFM, Irvine and Baragar (1971) • Al2O3-(FeO+Fe2O3+TiO2)-MgO (Jensen 1976) Volume 2 Chapter Two Page 82 • Q’ vs. ANOR (Streckeisen and LeMaitre 1979) • A/NK vs. A/CNK (Maniar and Piccoli 1989) • Mn*10-TiO2-P2O5*10 (Mullen 1983) • MgO-Al2O3-FeOt (Pearce et al. 1977) • LogRb vs. Log(Y+Nb) (Pearce et al. 1984) The Fe# sign, which occurs in the text of the geochemistry chapters and in the chemical tables of Appendix 3, means Fe2Otot /(Fe2O3tot + MgO). The chemical compositions of minerals have been determined from polished thin sections using Cameca SX100 electron microprobe in the Geological Survey of Finland. Conditions of analysis were: voltage = 15kV, intensity of beam current = 25nA, beam diameter = 5 micrometers. About 500 analyses have been carried out from 15 thin sections from the area of this Map Explanation. A selection of the most relevant analyses is presented in App. 4. 2.5.4. C-isotope Analyses Carbonate rock samples have been collected from the metamorphic terrain in Mozambique. Mostly, they represent sedimentary carbonate rock occurrences, but in a few cases evidence favouring a carbonatitic origin has been presented. The isotopic studies were done in order to get information on the depositional age of the units and to test the hypothesis for carbonatitic origin for the samples from Mt Muande, Mt Xiluvo and Boroma. The proportions of calcite and dolomite were determined in the mineralogical laboratory of the Geological Survey of Finland, Espoo using a semi-quantitative XRD procedure. The samples were analysed for the isotopic composition of carbon and oxygen using the traditional phosphoric acid method in the Department of Geology, University of Helsinki. The samples with calcite as the dominant carbonate mineral were reacted at 72°C and those with dolomite at 90°C and analysed by a Finnigan Delta Advantage mass spectrometer running in a continuous flow mode. The calcite-dolomite proportions and the results of the isotopic determinations are being discussed in relevant chapters in this explanation. The analysed data are shown in tables. The δ18O values are given relative to the VPDB standard, but for the suspected carbonatites the values have also beenrecalculated relative to the VSMOW standard. 2.6. MAP PRODUCTS 2.6.1. Base Maps Datum Transformation Since the available 1:250 000 topographic maps of Mozambique use UTM Tete datum in stead of Moznet datum, the geodetic reference system could not directly be used for preparing base maps for plotting geology. Consequently, the UTM grid coordinates have been transformed from the Tete datum to the Moznet datum. This is implemented as a three-step process: 1) UTM (Tete datum, zone 36/37, Clarke 1866 ellipsoid) → 3D geocentric. 2) 3D geocentric (Tete datum) → 3D geocentric (WGS84). Volume 2 Chapter Two Page 83 3) 3D geocentric → UTM 36/37 (WGS84). Step 1 and 3 are purely mathematical. In step 2 the standard 7-parameter Helmert transformation (also known as Bursa-Wulf formula; see Table 2.1) is used (Norconsult, 2002). Using these values and the network of GPS track logs recorded by the mapping teams, the topographic map sheets have been rectified to the Moznet coordinate system. UTM zone 36 was used west of the meridian 36°W, and UTM zone 37, east of 36°W. Manual Digitising Using the rectified topographic map sheets as background in ArcMap, a number of shape files, including point names (e.g., hill tops), roads and paths, railroads, power lines and towns and villages, have been created by manual digitising. In some cases, the manual digital results have been adjusted using Landsat imagery. It was also noted that the hydrography had changed significantly since the old topographic maps were made in the 1970’s and earlier. The hydrographic map themes were therefore based mainly on satellite images. The rivers were predominantly digitised on top of the satellite images while picking up the names from the topographic maps. The other three hydrographic themes were made semi-automatically from the satellite images using the method described below: • Only Landsat-7 band 4 was used because it shows significant discrimination between water covered surfaces and dry surfaces. • The images were re-classified into 3 classes (land, water and no data) after an empirically found threshold value (DN varying between 44 and 55). • By using the raster-to-feature conversion in ArcMap a polygon theme (per image) was prepared. • The features were generalised and polygons with area less than 0.5 km2 were deleted. • Clouds and other errors were removed. • By selecting the sea-polygon the islands theme and a coastline could be produced. • The new coastline was inserted into the older MZ-poly theme containing the complete Mozambique outline in small scale. • The residual polygons were a mixture of lakes, parts of rivers and wetlands, which were to be discriminated further. SRTM Digital Elevation Data Shuttle Radar Topography Mission (STRM) elevation data covering LOT 2 were collected and processed. SRTM data covering Africa are available in the public domain from the NASA SRTM ftp site ftp://edcsgs9.cr.usgs.gov/pub/data/ srtm/Africa since 1st of April 2004. The grid size of the data set is 90 metres. It is a generalisation from the full resolution 30 metres data set. SRTM digital elevation model (DEM) is less resolved than ASTER DEM’s but ten times better than DTED0 or GTOPO30, which have previously been the best public elevation data sets covering Mozambique. Many applications can be processed with this data and the Volume 2 Chapter Two Page 84 Consortium has transformed the DEM covering the project areas into an easily usable form. This data set has been found to be very useful for the project and it has been used for the creation of elevation contours (Fig. 2.13) and structural interpretation. SRTM data form a good source of elevation contours for the base maps at 1:250 000 scale. The spatial accuracy is usually better than 15 meters. A pilot study was performed on map sheet 2032 (LOT 3) to produce contours with 50 meters interval. Fig. 2.13. Unedited contours on the digital elevation model (map sheet 2032). 2.6.2. Geological Maps The LOT 2 area covers most of the Tete Province and large parts of the Manica and Sofala Provinces, a total of 190 000 km². LOT 2 Extension is located in the Zambézia Province and has a surface of 30 000 km² (Fig. 1.1). A total of 16 geological map sheets, scale 1:250 000, have been prepared. They may correspond with an area of 1° x 1° (Square Degree Sheet, SDS). Occasionally, several Degree Sheets may be combined in a single map sheet (Fig. 2.15). Table 2.3 lists the names and numerical codes of the map sheets. A total of 20 detailed geological maps, scale 1:50 000, have been prepared. Their location is shown in Fig. 2.14. Volume 2 Chapter Two Page 85 Table 2.3. Geological map sheets in the LOT 2 (+ Extension) area, showing Degree Sheet number, Sheet Codes and Names. No. Area Degree Sheet Sheet Code Name 1 : 50 000 Sheets 1 1430/1431 24/25 Inhamambo/Maluwera 2 1432 26 Chifunde 3 1530/1531 35/36 Zumbo/Fíngoè-Mágoè 414, 415, 451,452, 453, 454, 489, 490 4 1532 37 Songo 5 1533/1534 38/39 Cazula/Zóbuè 6 1631/1632 47/48 Mecumbura/Chioco 627, 628, 656 7 1633 49 Tete 629, 657 8 1634 50 Tambara 9 1732/1733 57/58 Guro 683, 684 10 1734 59 Chemba 11 1832/1833 65/66 Manica/Catandica 803, 804, 805, 819, 820, 821, 822 12 1834 67 Gorongosa 13 1932/1933 70/71 Rotanda/Chimoio 835, 836, 837, 838 14 LO T 2 1934 72 Beira 15 1735 60 Mutarara 16 Ext. 1736 61 Quelimane 17 1737/1738/1739 Namacurra/Maganja/Pebane SDS numbers in bold are discussed in this Map Explanation. Fig. 2.14. Map sheet division for Lot 2, based on SDS grid. Volume 2 Chapter Two Page 86 2.6.3. Map Explanations The LOT 2 area is covered by two Map Explanations (Table 2.3; see also Foreword, Figure 2). These Map Explanations aim to describe all aspects of the geology, structural and tectonic settings, as well as mineral potential and metallogeny. The present Map Explanation is Volume 2. The other Map Explanations are referred to as Volume 1 (GTK Consortium, 2006a), Volume 3 (GTK Consortium, 2006c) and Volume 4 (GTK Consortium, 2006d). The grouping of Map Sheets covered by a single Map Explanation Volume is shown in Table 2.4 and Fig. 2.15. Table 2.4. Geological Map Sheets and Map Explanations in the LOT 2 (+ Extension) area, showing Degree Sheet number, Sheet Codes and Names. Volume Area Square Degree Sheet Sheet Code Name 1:50 000 Sheets 1430/1431 24/25 Inhamambo/Maluwera 1432 26 Chifunde 1530/1531 35/36 Zumbo/Fíngoè-Mágoè 414, 415, 451, 452, 453, 454, 489, 490 1532 37 Songo 4 1533/1534 38/39 Cazula/Zóbuè 1631/1632 47/48 Mecumbura/Chioco 627, 628, 656 1633 49 Tete 629, 657 1634 50 Tambara 1732/1733 57/58 Guro 683, 684 1734 59 Chemba 1832/1833 65/66 Manica/Catandica 803, 804, 805, 819, 820, 821, 822 1834 67 Gorongosa 1932/1933 70/71 Rotanda/Chimoio 835, 836, 837, 838 2 LO T 2 1934 72 Beira 1735 60 Mutarara-Morrumbala Ext. 1736 61 Quelimane 3 1737/1738/1739 62/63/64 Namacurra/Maganja/Pebane 2032/2033 74/75 Espungabera/Chibabava 2034/2035 76/77 Nova-Mambone 2131/2132 78/79 Massagena 2133 80 Chidoco 2134/2135 81/82 Save/Bazaruto 2231 83 Chicualacuala 2232 84 Machaila 2233 85 Chigubo 2234/2235 86/87 Mabote/vilanculos 2331/2332 88/89 Rio Singuedzi/Massingir 2333 90 Rio Changana 2334/2335 91/92 Funhalouro/Inhambane 2431/2432 93/94 Chilembene 2433 95 Chókwè 2434/2435 96/97 Zavala/Inharrime 2531/2532 98/99 Maputo 2533/2534 100/101 Xai-Xai/Zavala 1 LO T 3 2632 102 Bela-Vista SDS numbers in bold are discussed in this Map Explanation. Volume 2 Chapter Two Page 87 Fig. 2.15. Division of Map Explanations and numbering of map sheets scale 1 : 250 000. Degree sheets 1630, 1631/1632, 1633,1634, 1732/1733, 1734, 1832/1833, 1834, 1932/1933 and 1934 will be discussed in Map Explanation- Volume 2. 2.7. MINERAL INFORMATION SYSTEM (MIS) Existing mineral deposit data, obtained from the Council for Geoscience (CGS), Pretoria, South Africa, was incorporated into ArcGIS project format. The data, dealing with approximately 90 mineral deposits, have been reformatted into ArcView shape file in order to facilitate matching with other geo-referenced data when producing mineral maps. In addition, the GTK Consortium has compiled a new database of 520 mineral deposits and occurrences, including stone, aggregate and grave quarries. This data covers the entire LOT 2, LOT 3 and Extension Contract areas. The data has been compiled from analogue DNG reports, published sources and data extracted from the Internet. In doing so, it was Volume 2 Chapter Two Page 88 found out that the location of several mineral deposits and showings in different databases was not coherently documented. GPS-controlled field checks were obviously needed. Inspection of mineral occurrences proved to be time consuming and often impossible. This was due to the inaccuracy of the reported coordinates (~ one minute, meaning a maximum error of ~ one km) in existing documents and, having been abandoned for over 40 years, a general lack of surface features of most workings. Occasionally, even greater discrepancies, up to 2 – 3 km, were found when comparing indicated locations with GPS- verified locations. Fig. 2.16. The structure of the mineral database used in LOT 2. It was found, for example, that some major deposits such as the Boroma limestone mine and Monte Fema iron deposit had discrepancies of 3.5 and 2 km, respectively. Dispite the difficulties, a total of 50 mineral occurrences from this Explanation area were located and surveyed in detail, comprising an inventory of the mineral commodities and mode of occurrence, sampling and digital photographs taken. During mapping of Karoo formations a number of coal deposits have been surveyed and added to the Data Capture Forms with over 150 entries in Tete province, collected from DNG reports. Adding analogue information into a digital database is an ongoing process. The database structure is shown in Fig. 2.16. An example of data capture, showing different attributes, is presented in Figs. 2.17 and 2.18. Volume 2 Chapter Two Page 89 Fig. 2.17. An example of the data capture for the mineral database, attributes for identification. Fig. 2.18. An example on data capture for the mineral database, attributes for deposit in formation. Volume 2 Chapter Three Page 90 CHAPTER 3 INFRASTRUCTURE The area covered by this Map Explanation belongs provinces of Tete, Manica and Sofala. Population density is generally low and ranges from < than 5 persons/km² in the Mágoè district to < than 20 persons/km² in the Mutarara district at the border with Malawi. Tete, in the northern part of the Map Explanation area (DS 1633), is by far the largest town in the northwestern Mozambique with a population of 101 984 (1997 census). It is a commercial and administrative centre, located at the Zambezi River, with a heavy traffic bridge that is part of the international highway between Harare (Zimbabwe) and Blantyre (Malawi), crossing the Tete corridor. Irrespective its huge water debit, the Zambezi River is unfit for shipping. A recent study has demonstrated, however, that a restricted amount of dredging can significantly improve navigation on this waterway (oral comm. J. Marques). Tete has an airport that is being served on a regular schedule. Nearby Moatize, located some 20 km to the east, is a rapidly growing population centre, thanks to international through-traffic by main road, coal mining and booming coal exploration in the region. A railway, currently under reconstruction, connects Moatize with the port of Beira. Town of Chimoio, located 60 km east of Manica along the railway towards Beira, is the biggest administrational, commercial and population center in the Map Explanation area, with its population of 177 608 (1997 census). Chimoio is also surrounded by cultivated farmlands, extensive to all directions. Industrial facilities include a large textile mill (currently closed), cotton and sisal processing plants, sawmills, brewery and a soft drink bottling factory. Barragem Chicamba is an artificial lake and hydroelectric plant in the Revùe River between Manica and Chimoio. It has a stunning location with a sheered-off rock mass, forming a natural V-shape, to house the dam. In the southern part of the Map Explanation area Manica (altitude 667 m) is a major commercial and population centre with 20 662 (1997 census) inhabitants close to the Zimbabwe border with an international crossing point. A railway connects the port of Beira with Manica and continues further into Zimbabwe. Gold mining (in the Mutare-Manica greenstone belt) and farming have greatly contributed to the prosperity of the area. It is now best known for the mineral water from the Vumba Mountains. Apart from the Harare-Blantyre international highway, other paved roads in the northern part of the Map Explanation area include the roads to Zambia, to Songo, and southwards to Manica. A service road follows the electricity power line from Cahora Bassa southwards to South Africa. Otherwise access is rather difficult in the northern area. In the Tete map sheet (DS 1633) there is no direct road connection from Tete to the southeastern quarter of the map sheet, southeast of the Luenha River. Access is through Changara and a shortcut from the southern side of the Luenha bridge, or further southwards, through Mungári (DS 1733) and from there to the north. In this way the lively centre of Mândiè is accessible, as well as the areas further eastwards, in the direction of the Zambezi River. At Massangano, east of Mândiè, the ruins of a fortress dating from the 18th century can be visited. The northern bank of the Luenha River, with many villages of local importance, is accessible through a historical road with idyllic bridges, starting from Mazoe by the main road south of Tete. The perennial Luenha River, with its source area in Zimbabwe, is in its lowland area a Volume 2 Chapter Three Page 91 shallow waterway with sand shoals, 100 – 200 m in width. South of Changara, in its upper course, the river runs down across Precambrian terrain with its channel almost continuously amongst rugged cliffs. The area covered by the Tambara map sheet (DS 1634) is accessible by car approaching from the south through Mungári (DS 1733), and from the area covered by the Zóbuè map sheet (DS 1534) in the north. The latter road runs between the Zambezi River and the border of Malawi. South of the Changara-Mungari latitude (ca. 17ºS) the road network is dense enough for reaching by car almost all parts of the Map Explanation area. Most of the roads to the mountainous Zimbabwe border regions, however, are poor, save the paved roads through the international crossing points at Cuchamano (~ 17º S) and Machipanda, west of Manica (almost 19º S). Between these two stations, roads branch from the main road a little north of the Mungári road junction, at Guro, at the Macossa road junction, at Catandica village and south of Catandica. There is no road to the mountainous Umkondo terrain in the southwestern corner of the Map Explanation area, south of Manica (DS 1932). Practically all the main roads and a multitude of small village roads and tracks have been registered as GPS track logs by the GTK Consortium. Helicopter was used in remote areas without roads, to save time in mapping. In the northern, less densely populated parts of the Map Explanation area GSM telephone connection links are currently available at Tete, Matambo, Songo and Changara. In the southern part mobile telephone connection is also available in big population centres, along the main roads including Catandica, Manica and Chimoio. The mobile phone network is rapidlyexpanding. At present landmines have generally been cleared. However, it is advisable to contact local authorities for advice before going into the field. Volume 2 Chapter Four Page 92 CHAPTER 4 PHYSIOGRAPHY AND GEOMORPHOLOGY 4.1. GEOMORPHOLOGY The territory of Mozambique is divided into four physiographic zones or cycles (King, 1961). Each zone or cycle has developed its own morphological plateau, separated by erosional escarpments: • Mountainous Zone or Gondwana Cycle (> 1200 m). • Large Plateau Zone or African Cycle (500 – 1200 m). • Intermediate Plateau Zone or Zumbo Cycle (200 – 500 m). • Coastal Plain Zone or Congo Cycle (< 200m). The Mountainous Zone was developed during the Gondwana Cycle that developed as a consequence of the Permo-Carboniferous movements, the onset of the Karoo Event. It essentially affected the crystalline basement and refers to plateaux located at altitudes between 1500 and 1800 metres. It is distributed (outside the present degree sheets) along the border with Malawi. This cycle is responsible for a major phase of peneplanation of the African continent during an extensive erosional period from the Upper Karoo till the Upper Jurassic/Lower Cretaceous The Large Plateau Zone developed during the African Cycle, an Early Cretaceous erosional phase that heralded the onset of the East African Rift Event. It corresponds to an erosion level at altitudes of 500 to 1200 metres. In Mozambique it can be divided into three distinctive sub-cycles, i.e., the Carumacáfuè Sub-cycle with peneplains at altitudes of 600 to 800 metres (with the best example of a perfect meseta at Mount Carumacáfuè), the Messandaluz Sub-cycle with plateaux between 500 and 1000 metres of altitude, and the Songo Sub-cycle with plateau altitudes of 1000 to 1200 metres. The Intermediate Plateau Zone developed during the Zumbo Cycle, a phase of Middle Tertiary epeirogenesis. It consists of a transitional erosional stage between the Large Plateau and the Coastal Plain Zones. The altitude is between 200 and 500 metres, and it is developed along the Zambezi Valley and its larger tributaries. This cycle almost completely eroded the Karoo terrains and the Tete Gabbro-Anorthosite Suite. In the area of Precambrian rocks, including Matambo, Missawa-Mândiè, Guro-Macossa, Marínguè and Changara-Vanduzi, inselbergs were formed. The erosional process ends with the Coastal Plain Zone developed during the Congo Cycle, starting in Plio-Pleistocene times. It corresponds to the present Zambezi Valley from near the Cahora Bassa dam and extending towards the east to the Lupata Trough, next Tambara and continuing to Chinde-Quelimane on the shore of the Indian Ocean. In the area covered by this Map Explanation altitudes range from sea level to over 2400 m a.s.l. The highest points of interest are: Monte Binga (2436 m) in the Chimanimani Mountains, on the border with Zimbabwe is the highest point of the country (southern part of SDS 1932), the isolated Serra da Gorongosa (1862 m) corresponds with a huge potassic intrusive complex (western margin of SDS 1834) and Monte Zambelangombe (1205 m) in Volume 2 Chapter Four Page 93 Mungari gneisses (north of the Macossa road in the southeastern quadrant of SDS 1733). The border zone with Zimbabwe in the west, mainly underlain by Archaean crust of the Zimbabwe Craton and quartzitic supracrustals, is in general rugged to mountainous, often with difficult accessibility. Some parts of the western area owe their elevation to East Africa Rift movements cutting the Precambrian crystalline basement. This is exemplified spectacularly by a prominent east-dipping fault slope only a kilometre west of the town of Catandica and by a similar SE-dipping fault slope in the southwestern corner of the Map Explanation area. Impressively high inselbergs occur along the central northerly trending strip of Precambrian rocks belonging to the Barue Complex. The topography generally drops towards the Zambezi River and towards the coast. Vast lowlands spread out in the Cretaceous rift area in the eastern part of the Map Explanation area. 4.2. BASEMENT TECTONICS The drainage system and topography of Mozambique are further determined by basement tectonics defining two conjugate sets, one with N-S and E-W trends and the other with NW- SE and NE-SW orientation. They correspond with zones of crustal failure that have been rejuvenated repeatedly, most recently during the Karoo and East Africa Rift Events. These structures often define contacts between Precambrian basement and Phanerozoic cover. The valleys of the Zambezi River and tributaries form a characteristic geographic feature in the area. After leaving the deeply dissected domain underlain by the Proterozoic Tete Gabbro-Anorthosite Suite north of Tete, the river flows in an almost straight streambed to the southeast within a wide trough filled with Phanerozoic sediments. North of Tete the river is offset by an E-W fault over a distance of ~ 5 km to resume upstream its NW-SE direction. Tributaries join the Zambezi River under a 90° angle, exhibiting predominantly NE- SW directions. Further southeast, outside the area covered by this Map Explanation, it enters the southern extension of the N-S trending Malawi rift before reaching the Indian Ocean. The course of the river appears controlled by the alignment of commonly NW-SE and W-E trending rift or fault features. Upstream, the E-W directed valley of the Zambezi River, the stretch now occupied by the Cahora Bassa Lake, corresponds with the western continuation of the E-W striking Sanângoè Shear Zone. The courses of smaller streams and rivers are controlled by more local and variable tectonic structures. In the northern part of the Map Explanation area a good example is the Luenha River, the biggest tributary of Zambezi River in the area. It enters its lower, smoothly flowing part exactly at the Precambrian-Phanerozoic junction at Changara, while crossing a NW-SE trending ridge of siliceous fault gouge. Further down stream, close to the junction with the Zambezi River, its local E-W course between Mândiè and Massangano is strictly controlled over many kilometres by a similar linear ridge also composed of siliceous fault gouge along its northern bank. Similar ridges are sites of many spectacular linear topographic highs in the Tete map sheet and elsewhere. In the areas south of the Tete, these narrow linear sub-continuous ridges occur in rather easily accessible places along major roads or crossing river channels, thus providing a good opportunity to study their composition, fabric, origin and emplacement time. The fault character of these ridges is manifested by the fact that they commonly occur at the boundary between Phanerozoic cover and Precambrian basement. Examples are the white- coloured hill slopes south of Changara, a manifestation of a silicified normal, NE-dipping Volume 2 Chapter Four Page 94 fault, with Precambrian basement exposed on the SW side (Fig. 4.1). The Phanerozoic cover is systematically at a topographically lower level at Phanerozoic/ Precambrian fault contacts. Another E-W trending linear ridge west of Tete is partly intra-basement. Similar ridges proved an important aid during field verification to map accurately basement/cover contacts. Ridges that could not be visited have been identified in satellite imagery or topographic maps to complete the geologic picture. Whenever asymmetrical ridges have been observed in the field, the relatively down- thrown block was covered by recent sediments, concealing the underlying rocks. Karoo rocks are generally exposed nearby. Fig. 4.1. Silicified fault gouge between the Precambrian and Phanerozoic terrains. South of the Changara village. 4.3. CLIMATE In Mozambique four types of climate are distinguished: • Tropical rainfall climate. • Dry bushland-savannah climate. • Tropical highland climate. • Mountainclimate. Climate in the area covered by this Map Explanation depends mainly on altitude. The lower ground from Tete to Guro has dry bushland-savannah climate while the higher Guro- Manica area has tropical highland climate. The Zambezi valley, including the banks of the Cahora Bassa Lake, rank among the hottest places in Mozambique with average annual temperatures above 26° C and an annual rainfall of only 600 to 800 mm. While in Manica area average annual temperature is just below 20°C and the rainfall 1400 – 1800 mm. Two well-defined seasons can be defined: • Rainy season from December to March. • Dry season from April to November. Volume 2 Chapter Four Page 95 Vegetation is mainly conditioned by climate and soil type. Plateaus and valleys underlain by Karoo and younger rocks are characterised by the following flora: • High and intermediate forests in valleys formed by the more deeply incised rivers. • Savannah-like dry parklands in compact and sandy terrains. • Shrub and bush savannah in terrains with a clayey-sandy soil or areas with coarse grained, clastic sediments. Volume 2 Chapter Five Page 96 CHAPTER 5 LITHOSTRATIGRAPHY 5.1. PRINCIPLES Legends in the geological maps produced by the GTK Consortium are based on a stratigraphic code that follows the recommendations of the International Sub-commission on Stratigraphic Classification (ISSC) of the International Commission on Stratigraphy (ICS) of the International Union of Geological Sciences (IUGS). Stratigraphic classification is the systematic arrangement of the mappable rock bodies of the earth’s crust into units with reference to any of the properties that rocks may possess. Lithostratigraphic classification is based on lithostratigraphic units6 with each unit consisting dominantly of a certain rock type or a combination of rock types. The geological maps produced by the GTK Consortium may serve as examples for a new generation of dynamic geological maps. This requires an update and standardisation of a variety of legends employed in the past in existing geological maps, including the definition of mappable lithostratigraphic units according to guidelines by the IUGS. A geological legend comprises a short explanatory list of map symbols and the sequence of rock units, the oldest at the bottom and the youngest at the top. The rock units display a hierarchical relationship with subunits grouped together into larger units based on geological relationships in space and time. These relate to the geodynamic development of the area. Commonly used terms for lithostratigraphic rock units, in a hierarchical sequence (from lower to higher rank) are: bed, member, formation, group, supergroup, complex and system. The terms can be used in a formal and informal way. The use of a capital in, e.g., ‘Vúzi Tillite Formation’ of the ‘Lower Karoo Group’ suggests that both rock units have been formally defined, with a description of a ‘type-locality’ of every ‘Formation’ belonging to the ‘Group’. ‘Vúzi Tillite formation’, on the other hand, suggests a field name, an informally defined lithologic unit7. Mappable lithostratigraphic units are grouped in two vertical columns. The left column comprises rock units that have been deposited on top of each other. Their contacts may be concordant, para-concordant (concordant, but with a time hiatus between successive lithologic units) or discordant. Rock types comprise mainly (meta-)sediments, (meta-) volcanics (including pyroclastics) or rocks that have been tectonically emplaced (e.g., ophiolites or their metamorphic equivalents). Intrusive igneous rocks are grouped in the column to the right. These comprise plutonic igneous rocks (granite, gabbro, etc.) and igneous rocks of sub- volcanic derivation (e.g., dolerite, diabase or intermediate to felsic dykes). The definitions of lithostratigraphic units, with increasing rank, according to Bates and Jackson (1987) are presented in App.1. 6 Since the 1980’s ‘chrono-stratigraphical’ nomenclature (series, stages and substages) used in earlier literature has been generally superseded by lithostratigraphical nomenclature comprising supergroups, groups, formations and members (Johnson et al. 1996). 7 At the request of the Client and Consulting Engineer informal use of the term ‘formation’ is indicated by an asterix as in ‘Formation*’ Volume 2 Chapter Five Page 97 5.2. HISTORIC DEVELOPMENT The first geological investigations in the area covered by this Map Explanation refer to studies of coal occurrences and were executed by Guyot (1882), Thompson (1882), Lapierre (1883), Zeiller (1883), Kuss (1884) and Potonié (1899). These authors mainly described in a broad manner the lithostratigraphy of coal-bearing seams in the Lower Karoo near Moatize. The work of these early pioneers was followed in the first half of the 20th century by local and regional stratigraphic studies of the carbonaceous Karoo sediments (Potonié, 1900; Gothan, 1912, 1914; Anthoine and Dubois, 1922, 1925; Gérard, 1924; Andrade, 1908, 1929; Dixey, 1929). Similar lithologies in the Zumbo area (located further to the northwest) were surveyed by Freitas (1932, 1939) and later Bebiano (1934, 1936). The coal-bearing basins were further studied by Borges (1935, 1946), Teixeira (1943, 1946, 1947) and Gaspar (1948). From the 1950’s till the 1980’s, various publications and technical reports were elaborated based on fieldwork as part of a vast effort to improve the knowledge on the geology and the economic value of the mineral resources of the Tete, Sofala and Manica provinces. These works are contained in Teixeira (1950, 1951), Colin (1951), Borges (1952), Longyear Company (1955), Real (1958, 1959, 1961, 1962, 1963, 1966), Carvalho (1960, 1961, 1962, 1964, 1969, 1975, 1977), Nunes (1961), Santos (1961, 1962, 1974), Pinto (1964, 1970, 1973) Feys (1965), Feys and Fabre (1966), Sousa and Mériaux (1971), Afonso (1975, 1976, 1984), Afonso et al. (1969, 1993, 1998), Sousa (1977, 1984), Limex (1981), LKAB (1981, 1982) and Hunting Geology and Geophysics Limited (1984). The discovery of uranium mineralisation in the Mavudzi valley, northwest of Tete, triggered initial interest in the Tete area (Luna and Freitas, 1953; Davidson and Bennet, 1960). The E. J. Longyear Company (1956) carried out the first systematic geological investigations in this area (see also Lyall, 1955). Since then useful work has been carried out in the province but with notable exceptions (Real, 1966; Vail, 1965; Vail and Pinto, 1966; Coelho, 1969; Svirine, 1980), the results have remained unpublished. Between 1980 and 1984 Hunting Geology and Geophysics Limited initiated new phase of geological investigations (Hunting, 1984). They carried out a comprehensive mineral exploration and reconnaissance geological mapping project under the aegis of the Mozambican Government. The French BRGM surveyed approximately at the same time (1980 – 1984) the northern part of Mozambique resulting in publication of a geological map – scale 1:1 000 000 – that showed new insights in the geology of the Tete area (Pinna et al. 1986, 1987; Pinna and Marteau, 1987). 5.3. REGIONAL GEOLOGY Africa is largely composed of a mosaic of Archaean cratons and mobile belts amalgamated by elongated Proterozoic-Cambrian fold belts and covered by undeformed sediments and extrusives of Neoproterozoic, Late Carboniferous-Early Jurassic and Cretaceous-Quaternary age. Younger fold belts, deformed during the Hercynian and Alpine orogenies, are only of local extent. The first is of Middle Palaeozoic age and restricted in Africa to the Mauritides and the Moroccan Meseta in the northwest and the Cape fold belt in the south. Alpine penetrative deformation (Cretaceous-Tertiary) is limited to the Kabylia-Rif-Betic orocline that encloses the Alboràn Sea, the westernmost part of the Mediterranean. Volume 2 ChapterFive Page 98 In eastern and southern Africa the following tectono-structural-magmatic domains – the building blocks – each related to major and specific geodynamic events – can be distinguished (Table 5.1., mainly after Gabert, 1984; Dirks and Ashwal, 2002). Table 5.1. Africa’s tectono-structural-magmatic domains. Event/System Era Age (Ma) Main Phase Neogene - Present 23 - 0 East African Rift System (EARS) Initial Phase Cretaceous - Paleogene 145 - 23 Karoo Event Late Carboniferous – Early Jurassic 318 - 180 Gondwanide Terrains Post-Pan-African Platforms < 542 Pan-African Orogeny Neoproterozoic- Cambrian 750 - 490 Pan-African Early Pan-African Basins Neoproterozoic 900 - 700 Kibaran Mesoproterozoic 1750 - 900 Late Phase ~ 1860 Ubendian/ Usagaran Early Phase Palaeoproterozoic 2100 - 2025 Cratons (granite-greenstone terrains) and Mobile Belts Archaean 3800 - 2500 5.3.1. Archaean cratons and mobile belts These include in Africa the West African, Nile or East Sahara, Central African or Congo and Southern Africa or Kalahari cratons, the Malagasy Shield and interlocking Archean mobile belts such as the Limpopo mobile belt. The latter high-grade mobile belt amalgamates the Kaapvaal and Zimbabwe cratons resulting into the Southern Africa or Kalahari craton for which recently the term Kalahari craton has been coined (McCourt et al. 2004). Large parts of Archaean cratons have been reworked during younger orogenies. Alternatively, Archaean rocks also occur outside cratonic blocks in younger fold belts. Well-known examples have been described in eastern Africa (Kenya, Tanzania) and the Bangweulu Block in northern Zambia (Fig. 5.1). Archaean cratons represent stable remnants of the Earth’s earliest continental lithosphere. Seismic investigations confirm that the structure of the crust and sub-crustal upper mantle of these cratons differ significantly from that of most post-Archaean terrains. High-velocity mantle roots extent to at least 200 km, locally up to 250 – 300 km, beneath cratonic terrains. Xenolith studies indicate that cratons have experienced a dynamic and protracted history of tectono-thermal activity. Cratonisation occurred not as a discrete event, but in stages, with final stabilisation postdating crustal formation. Archaean cratons are generally composed of (from old to young) granulite-gneiss belts, granite-greenstone associations, ‘younger granites’ and late-Archaean basins, mobile belts and dykes and layered intrusions. Volume 2 Chapter Five Page 99 Courtesy Paul Dirks 2003 Cratonic Blocks Archaean Terranes in Cratons I = West African Craton A = Reguibat Shield G = Tanzania Craton II = Central African Craton B = Man Shield H = Zimbabwe Craton III = Southern African Craton C = Chaillu – Gabon Block I = Kaapvaal Craton IV = Nile or East Sahara Craton D = Zaire Block J = Malagasy Shield V = Malagasy Shield E = Kasai Block K = Uganda and West Nile Complex F = Angola Block L = Limpopo Belt (also 2000 Ma) Palaeoproterozoic Terranes Outside Cratons Palaeoproterozoic Terranes in Cratons 16 = Richtersveld terrane 1 = Birrimian: Reguibat Shield 7 = Ubendian belt 17 = Rehoboth Arc 2 = Birrimian: Leo Shield 8 = Usagaran belt 18 = Kimezian 3 = Gabon belt: Francevillian 9 = Bangweulu Block 19 = Nyasa province 4 = Angolan Birrimian 10 = Magondi belt 20 = Hoggar-Air massifs 5 = Ruwenzori belt 11 = Okwa gneiss 6 = Rusizian gneiss 12 = Kheiss belt Archaean Intracratonic Basins Palaeoproterozoic Intracratonic Basins M = Witwatersrand and Ventersdorp basins 13 = Griqualand basin 14 = Transvaal basin 15 = Waterberg-Soutpansberg basins Fig. 5.1. Archaean and Palaeoproterozoic (Ubendian) terrains (3800 – 1750 MA (Dirks and Ashwal, 2002). Volume 2 Chapter Five Page 100 Granulite-gneiss belts Granulite-gneiss belts represent exhumed, high-grade, mid- to lower crustal levels with a complex, composite structural evolution. Some retain a history that goes back to 4.0 Ga and beyond. Predominant rock types are granulite- to upper amphibolite-facies quartzofeldspathic gneisses, containing the remnants of some of the earliest known sedimentary and volcanic rocks, as well as of layered igneous complexes (anorthosites). They are commonly folded into large-scale interference patterns and intersected by major, crustal-scale shear belts. Passchier et al. (1990) distinguished two major types of high-grade gneiss assemblages. The first one is derived mostly from mafic to felsic volcanics, intruded by granitoid gneisses of the TTG association8, and contains very little metasediments. The second type is largely composed of metamorphosed clastic and carbonate sediments, often of fluvial or shelf-type, intruded by dominantly S-type granitoid rocks. Field observations suggest that the above two types merely represent the end-members of a continuous spectrum. Rock types of the granulite-gneiss belts include quartzofeldspathic gneisses, mostly belonging to the TTG suite (with a volumetrically small component of paragneiss), amphibolites (derived from volcanic rocks), micaschists (assumedly derived from pelitic protoliths), marbles and quartzites (stable shelf settings?), BIF’s and layered igneous complexes. These units are most often conformable, probably as a result of intense deformation under ductile conditions. Granite-greenstone terrains These comprise the oldest major belts of well-preserved volcano-sedimentary rocks. They contain silicic to ultrabasic igneous rocks and volcanoclastic, siliciclastic and chemical sedimentary units, intruded by voluminous granitoid bodies. Since the early 1970’s, a tendency exists to emphasize the similarities between greenstone belts and to view their stratigraphy and structure in over-simplistic terms. Detailed recent studies reveal, however, that they are more complex than previously thought and that many differences exist between individual greenstone belts. Since the late 1980’s, general consensus has developed on the applicability of accretionary plate tectonics to the Archaean in general (albeit with adapted parameters) and on the equivalence, in principle, between greenstone belts and island arc/ophiolite complexes in particular (e.g. Windley, 1993; de Wit, 1998). Nevertheless, opponents argue either that unequivocal proof of Archaean ophiolites is still lacking (Bickle et al. 1994) or that plate tectonic processes were inoperative during the Archaean (Hamilton, 1998). Many greenstone belts display a common subdivision into a lower, dominantly volcanic sequence and an upper sedimentary succession. The lower sequence can be further subdivided into a basal section of primarily ultramafic rocks and an upper volcanic section with a predominance of calc-alkaline or tholeiitic, mafic to felsic volcanic material. The ultramafic section is composed mainly of (ultra-)mafic volcanics, including komatiites, with minor felsic tuffs. The upper volcanic section consists of (often pillowed) basalts, andesites and rhyolites. On average, from bottom to top, the stratigraphic pile is characterised by (1) a decrease in the volume of komatiites and – to a lesser extent – basalts, (2) an increase in the volcanoclastic/flow ratio and (3) an increase in the relative abundance of andesites and felsic 8 TTG: Tonalite-trondhjemite-granodiorite, geochemically similar to modern, mantle-derived I-type granitoids. Volume 2 Chapter Five Page 101 volcanics. Sediments in the volcanic group comprise chemically precipitated cherts, jaspers and banded ironstones, whereas the upper sedimentary succession consists of terrigenous clastic deposits of shales, pelitic sandstones, greywackes, conglomerates and quartzites. ‘Younger Granites’ In most Archaean cratons the greenstone belts are pervasively invaded by granitoids that form typical trondhjemite-tonalite-granodiorite (TTG) suites. It is generally believedthat they represent deeply eroded root zones equivalent to modern magmatic arcs. These are the so- called ‘Younger Granites’. Late-Archaean basins, dykes and layered intrusions The prime example of a late-Archaean intracontinental basin is the South African Witwa- tersrand basin that contains a sediment pile spanning a time interval from 2800 Ma to about 2000 Ma, deposited on the Kaapvaal Craton. Earth’s presumably oldest rift sequence is represented by the Pongola Supergroup in the SE corner of the Kaapvaal craton. The ~ 2575 Ma Great Dyke in Zimbabwe represents a unique linear feature (480 km long, average width of 8 km) that consists of four aligned lopoliths, representing layered (ultra-)mafic intrusions. 5.3.2. Palaeoproterozoic fold belts These include the Usagaran-Ubendian fold belt along the western and southern border of the Tanzanian craton but also further southwards in Niassa province (Mozambique), northeastern Zambia and Malawi. An early and a late orogenic phase are generally distinguished. It is argued that the early phase resulted in the development of the Usagaran fold belt during north-directed collision and accretion during the Eburnian around ~ 2100–2025 Ma (Daly et al. 1985; Daly, 1988) with granulite-facies metamorphic conditions. Zircon ages of 2084±8 Ma, corresponding with a phase of granitic magmatism, have been reported (Lenoir et al. 1994; Boven et al. 1999). In the Ubendian belt this early phase of regional deformation and metamorphism was followed by a Late Palaeoproterozoic phase of exhumation and extensive dextral shearing along major, steep NW-SE directed shear zones. This resulted in widespread penetrative deformation and development of a NW-SE fabric, transposition of the older E-W fabric and retrogradation under amphibolite-facies P-T-conditions. Timing of this event is constrained by the emplacement age of late-kinematic granitoids dated at 1847±37 Ma and 1864±32 Ma (both whole rock Rb/Sr and zircon U/Pb ages). An upper limit for the Ubendian shear event can be inferred from the age of the Kate shallow-level granite at ~1825 Ma (Schandelmeier, 1983). The latter is associated with volcanic rocks that unconformably overly Ubendian gneisses. Rb/Sr data on the Kate granite further suggest that the main boundary fault between the Bangweulu block and the Ubendian shear belt was reactivated 100 Ma after its emplacement (at 1724±31 Ma; Lenoir et al. 1993). Whether this age has regional significance is, however, uncertain. Ar-Ar stepwise heating analyses of different barrosite separates from mafic tectonite has yielded a weighted average cooling age of 1848±6 Ma for the argon fractions released at intermediate temperatures. This corroborates the above data and confirms the age of 1950–1850 Ma for the Late Palaeoproterozoic Ubendian tectogenesis (Boven et al. 1999). Volume 2 Chapter Five Page 102 5.3.3. Mesoproterozoic fold belts In southern and central Africa this comprises the Kibaran (Fig. 5.2.) and Irumide fold belts. On a global scale these fold belts can be correlated with the ‘Grenvillian orogeny’ culminating in the Rodinia Supercontinent around 1000 Ma. The Kibaran forms a curvi-linear fold belt striking from Namibia via Zambia, Angola, eastern Democratic Republic of Congo, Burundi, Rwanda and northwestern Tanzania into southern Uganda over a distance of 1500 km. The belt separates two lithospheric domains that were cratonised since the Ubendian, i.e., a lithospheric mass centred around the Congo craton in the west and a lithospheric domain comprising the Kalahari and Tanzania cratons, the Bangweulu block and interconnecting fold belts in the east. In Zambia the belt is exposed extensively and bifurcates into two separate fold belts that enclose the Bangweulu block, with the Irumides in the southeast and the Kibaran sensu stricto in the northwest. The belt is intersected by the Lufilian arc of Neoproterozoic Pan-African age. Here, rocks of the Kibaran fold belt are exposed in a number of windows unconformably overlain by rocks of the Katangan System. Metamorphism in the Kibaran belt generally reached greenschist facies, peaking around 1300 Ma (1278±58 Ma), with post-tectonic magmatism that according to Klerkx et al. (1984) continued up to 850 Ma. Overlying strata, belonging to the Pan-African, Karoo and Kalahari Systems, largely obscure the southern part of the Kibaran belt. Small windows of Kibaran metasedimentary units and granitoids emerge, however, in the Damara belt of Namibia, Angola (Carvalho et al. 1987), Botswana and Zimbabwe. The UNESCO-sponsored IGCP 418 undertook to trace the Kibaran belt into southwestern Africa (Botswana, Namibia) based on regional geophysical and new geochronological data (Key, 1997). The Kibaran is now recognised in the northern part of Zimbabwe as Irumide overprinting of older rocks. Radiometric dates from the Chewore Inlier (quoted in Goscombe et al. 1997) confirm the presence of reworked Middle Proterozoic rocks in northern Zimbabwe. While the northern Kibaran is an intra-cratonic fold belt, zircon ages of 1390 Ma testify the presence of juvenile Middle Proterozoic oceanic crust in the southern part of the belt (Johnson and Oliver, 1997). The end of the Middle Proterozoic was characterised by a major phase of basic magmatism elsewhere in Zimbabwe, that produced extensive flood basalts and major dolerite dyke swarms. Munyanyiwa (1997) has suggested that this phase of basaltic magmatism heralded the break-up of Rodinia. The recently completed airborne magnetic survey of northwestern Botswana has evidenced the presence of Middle Proterozoic Kibaran rocks that are infolded with younger Neoproterozoic rocks, with the same NE-SW strike, belonging to the Damara belt. Schwartz et al. (1995) reported the presence of volcanic rocks with an age of 1106 Ma in Kibaran inliers in the Damara belt. Volume 2 Chapter Five Page 103 Courtesy Paul Dirks 2003 Mesoproterozoic Terrains on Cratons Mesoproterozoic Active Continental Margins Mesoproterozoic Collisional Orogens 1 = Kibaran belt (failed rift) 5 = Sinclair Province 9 = Choma-Kaloma block 2 = Kunene Anorthosite Complex 6 = Namaqua belt 10 = Irumide belt 3 = Muva Group (platform) 7 = Natal belt 11 = Zambezi belt 4 = Umkondo Group (platform) 8 = Abbabis Gneiss 12 = Lurio belt Fig. 5.2. Mesoproterozoic (Kibaran) terrains (1750 – 900 Ma) (Dirks and Ashwal, 2002). 5.3.4. Neoproterozoic Pan-African fold belts The Mozambique belt can be considered as the ‘type-locality’ of the Pan-African orogeny and was first named by Holmes (1951) who recognised a structural discontinuity between the Archaean Tanzanian craton and younger gneisses to the east. Relatively recently, the term ‘East African Orogen’ (EAO) has been introduced to describe the Pan-African orogenic belt of eastern Africa (Stern, 1994). It is one of the earth’s greatest collision zones that can be followed over a distance of ~ 6000 km from Antarctica in the south to the Arabian Peninsula in the north and has ~ 350 Ma of evolution (e.g., Stern, 1994, 2002; Jacobs et al. 1998; Kröner et al. 2000a,b). Volume 2 Chapter Five Page 104 Courtesy Paul Dirks 2003 Neoproterozoic Collisional Orogens a = Mauritanites g = West Congo belt m = Lufilian arc b = Bessarides h = Kaoko belt n = Zambezi belt c = Rokolites i = Gariep belt o = East African: Nubian shield d = Anti Atlas j = Saldahnia belt p = East African: Mozambique belt e = Trans-Saharan: Pharusian belt k = Oubangide belt q = Ubendian belt f = Trans-Saharan: Dahomeyan belt l = Damara belt Neoproterozoic Failed Rifts Neoproterozoic Platforms-Foreland-Molasse Basins 1 = Gourma trough 5 = Anti-Atlas 9 = Owambo basin 2 = Sangha rift 6 = Taoudeni basin 10 = Nama basin 3 = Kundelungu basin 7 = Volta basin 4 = Bukoban 8 = Congo basin* Sub-basins in the Congo basin include: NW: Sembe Ouesso basin; NNE: Bangui-Lindian basins; SE: Bushimaybasin; SW: West Congo basin Fig. 5.3. Neoproterozoic-Early Paleozoic (Pan-African) terrains (900 – 500 Ma) (Dirks and Ashwal, 2002). The EAO is traditionally divided into a northern zone of juvenile Neoproterozoic crust and a southern zone mainly comprising reworked older rocks. This is confirmed by modern Sm-Nd model age studies. The tight clustering of Nd model ages in the northern zone manifest an overwhelming presence of new Neoproterozoic crust extracted from depleted mantle. Unlike the abundance of juvenile crust in the north, the southern part of the EAO is composed of remobilised older rocks. Model Nd ages of rock samples of the Archaean Tanzanian craton cluster tightly around 2.83±0.08 Ga (Stern, 2002). A Nd and Sr transect Volume 2 Chapter Five Page 105 across Mozambique belt rocks immediately east of the Tanzania craton shows that the belt is composed of reworked Archaean crust that show TDM ages of ~ 2.5 Ga (in the west) and granulites with a TDM ages of 1.0 – 1.4 Ga (in the east) (Maboko, 2000; Stern 2002). These ages supersede typical Pan-African K-Ar or Rb-Sr cooling ages of ~ 650 to 490 Ma known for a long time (Cahen and Snelling, 1966). Biotite cooling ages show a pronounced age gradient and manifest diachronous cooling across the belt with the western parts cooling below ~ 300° C up to ~ 150 Ma earlier than the eastern parts. The oldest biotite ages of 618±14 Ma from the western margin provide the best minimum estimate for the age of the pervasive amphibolite grade metamorphism. The EAO marks the disappearance of a major oceanic basin – the Mozambique Ocean – and the collision between East and West Gondwana (Roger et al. 1995). It is assumed that this regional metamorphic and deformational event occurred prior to ~ 650 Ma (Maboko, 2000). The Zambezi belt (n, Fig. 5.3.) of central southern Africa forms another Pan-African fold belt. It constitutes the eastern segment of a transcontinental Damara-Lufilian-Zambezi orogenic belt (~ 850 – 450 Ma). This transcontinental system separates the Congo craton from the Kalahari craton (Shackleton, 1996). The Pan-African orogeny is also present in West Africa, surrounding the West Africa craton, as (clockwise, starting in the north) Anti-Atlas, Hoggar and the Dahomey belt. Further southwards the orogeny continues into South America as the Brasilian orogeny and in Africa as the West Congo and Gariep belts. Most recently the Pan-African orogeny has also been recognised in large parts of southern Europe as the Cadomian. Pan-African continental collision resulted in the development of the Pangea Supercontinent. 5.3.5. Cambrian platform sedimentary rocks Large parts of the sediments deposited in the Pan-African ‘geosyncline’ have remained undeformed They include the upper part of the Bukoban System in northwestern Tanzania, the Kundulungu in Shaba, the Plateau Series overlying the Bangweulu block in northern Zambia and the Buschimay, Bilatian and Lindian in the eastern Democratic Republic of Congo. Molasse-type sediments of the Bukoban (Burundi, northwestern Tanzania) include diamictites, sandstones, siltstones, shales and conglomerates with subordinate dolomitic limestones, rhyolites and basaltic lavas. In Burundi these rocks are grouped together as the Malagarasian (Waleffe, 1965). Volcanics of the latter have been dated and yield rather consistent results (Deblond et al. 2001): 813±21 Ma and 810±25 Ma (K-Ar, recalculated after Cahen and Snelling, 1974) and 822±30 Ma (K-Ar, recalculated after Briden et al. 1971). Late- to post-Pan-African platform foreland deposits overly Pan-African and older basement with a marked unconformity – the Tassilian discordance with an age of ~ 570 Ma – in northern and western Africa. Coeval deposition took place in the Cape fold belt ‘geosyncline’. The event is not present in Mozambican territory. Volume 2 Chapter Five Page 106 5.3.6. Carboniferous platform sedimentary rocks Cambrian-Carboniferous basins of the North and South African Gondwana margin (570 – 290 Ma) are exposed in northern and western Africa (Morocco, Mauritania, Algeria and Libya) and the Cape fold belt (Fig. 5.4). Cambrian-Carboniferous foreland basins comprise the Taoudeni, Bove and Volta basins (Fig. 5.4). The Mauritides and Cape fold belt manifest Hercynian deformation. Courtesy Paul Dirks 2003 Cambrian-Carboniferous Basins of the North and South African Gondwana Margin (570 – 290 Ma) 1 = Tindouf basin 5 = Oed Mya basin 9 = Murzuq basin 2 = Reggane basin 6 = Illizi basin 10 = Kufrah basin 3 = Bechar basin 7 = Ghadames basin 11 = Western Desert 4 = Ahnet basin 8 = Hamra basin 12 = Cape Sequence Base of sequence is formed by the Tassilian discordance (~570 Ma) Top of sequence is formed by the Hercynian unconformity (~290 Ma) Cambrian-Carboniferous Foreland Basins (570 – 290 Ma) A = Taoudeni B = Bove C = Volta basin Permian-Triassic Rift-Sag Basins (Karoo: 290 – 180 Ma) A = Congo basin D = Mid and Lower Zambezi rift G = Lebombo rift B = Kalahari basin E = Luangwa rift H = East Africa rift C = Karoo basin F = Tuli-Sabi-Soutpansberg rift I = Malagasy basin Fig. 5.4. Gondwanide post-Pan-African terrains (~ 570 – 180 Ma) (Dirks and Ashwall, 2002). Volume 2 Chapter Five Page 107 5.3.7. Late Carboniferous-Early Jurassic sedimentary and volcanic rocks of the Karoo Late Carboniferous to Early Jurassic (290 to 180 Ma) continental sedimentation and subordinate flood basalts and rhyolite extrusion testify the aborted break-up of Gondwana. The term ‘Karoo’ was first used to describe a depositional sequence from the Great Karoo Basin in South Africa, where it encompasses strata of Late Carboniferous to Early Jurassic age (SACS, 1980). Time equivalent depositional sequences, exhibiting similar sequential trends, occur widespread in southern and eastern Africa (Figs. 5.4 and 5.5). They reflect important tectonic and climatic events, posterior to the Pan-African orogeny, during the time that Pangea had obtained its maximum size. During this period, while accretion was still going on in some places, major rift structures started to propagate, eventually ending in the break-up of Gondwana (Veevers and Powell, 1994; Wopfner and Casshyap, 1997; Wopfner, 1999, 2002). Fig. 5.5. Distribution of Karoo rocks (outcrop and sub- surface) in southern Africa (adapted from Verniers et al. 1989). Three types of Karoo basins can be distinguished: (1) large foredeep/sag basins, (2) passive margin basins and (3) intracratonic rifts (Figs. 5.4 and 5.5). Foredeep/sag basins include, apart from the Great Karoo Basin, the Kalahari/Zambezi, Angola/Barotse and Congo basins. These broad down-warps were initiated around ~ 290-280 Ma, posterior to the Late Palaeozoic Gondwanide Orogeny (e.g., Cape Fold Belt). As the deposition continued, rifting of such down-warps produced Graben-type structures, in which deposition of a great thickness of Karoo sediments took place. Intracratonic rift basins appear controlled by crustal weakness zones that were rejuvenated since the Middle and Late Triassic and accelerated Volume 2 Chapter Five Page 108 during continental break-up, comprising an aborted attempt around ~ 190-180 Ma, followed by continental dispersal starting at ~ 140 Ma. The tectonic history of the Metangula Graben may serve as an example (Verniers et al., 1989): The lower and middle Karoo sediments (Ecca age) were deposited in a limnic-fluvial system with a different basin form as shown by lateral facies changes that are abruptly cut by present rift structures. At Metangula rift-type NE-SW faulting occurred at the base of the upper Karoo (equivalent to middle Beaufort) with the NW fault margin being most active, followed by rapid subsidence and basin infill. Rejuvenation of rift faulting is reported during the upper part of the Beaufort or even Stormberg. In theMid-Zambezi basin, thick lake deposits of Permian age, reflecting a quiet, foredeep/sag basin tectonic setting, are unconformably overlain by much coarser alluvial and fluvial Triassic deposits (Engelbronner, 1996), supposedly reflecting rift faulting. In the Mana Pools basin, a similar change in depositional environment can be observed. Table 5.2. Lithostratigraphy of the Main Karoo Basin, South Africa (Johnson et al. 1996). Group Age Lithology Drakensberg Basalts Early Jurassic (200 – 180 Ma) Extensive flood basalts dated at ~ 180 Ma (Aldiss et al. 1984; Allsop et al. 1984; Fitch and Miller, 1984; Hooper et al. 1993). Subordinate acid lavas. Stormberg Group Late Triassic – Early Jurassic (215 – 200 Ma) The lower part comprises grey mudstones and sandstones with local coal seams. Where not removed by erosion, this sedi- mentary succession is capped largely by aeolian sandstones. Thickness ~ 2000 m. Beaufort Group ~ Late Permian – Middle Triassic (270 – 215 Ma Mainly lighter-coloured mudrocks (including greenish, reddish and purple varieties), sandstones and occasional conglomerates, for most part representing overbank fluvial deposits that accumulated sub-aerially under oxidising (semi-arid and arid) conditions. Characterised by vertebrate fossils rather than plant remains. Thickness up to ~ 5000 m. Ecca Group Early Permian – Late Permian (280 – 270 Ma) Dark-coloured shales with interspersed siltstones and sandstones (coarse-grained and pebbly in places) and occasional coal seams, deposited sub-aqueously under reducing, generally moist conditions in marine, lacustrine, deltaic and fluvial environments. Up to 3000 m in thickness. Dwyka Group Late Carboniferous – Early Permian (290 – 280 Ma) An up to 800 m thick sequence reflecting a glacial or glacial- related origin (diamictites, conglomerate, fluvio-glacial pebbly sandstone, rhytmites and mudrock with dropstones). When comparing Karoo sedimentary successions, similar underlying processes and sequence of events are reflected in individual basin fills. Each lithological sequence normally commences with (fluvio-) glaciogene rock types. This is followed by an interval in which red colours are absent and coal seams are commonly present. The higher strata exhibit reddish and greenish mudrocks manifesting a change to oxidising sub-aerial conditions. Next, aeolian sandstones often cap the older succession and reflect increasing aridity. Finally, basaltic lavas complete the succession. Although the above general trends can be observed in most Karoo sequences in southern Africa, rift development appears largely controlled by local tectonic factors and, consequently, Karoo sequences may differ along strike in individual rift basins and between different rift basins. Both basement geomorphology and syndepositional tectonic movements have obviously controlled deposition of Karoo lithologies. Volume 2 Chapter Five Page 109 Whereas the Karoo Supergroup in the Great Karoo basin has been divided into five Groups9, a division into Lower and Upper Karoo Groups (e.g., Engelbronner, 1996) is employed for most rift fills and also in this Map Explanation. The boundary between these Groups corresponds approximately with the Permian-Triassic boundary. From an economic perspective the Karoo is unique in that it hosts all the coal deposits in southern Africa. The combined reserves are estimated at ~ 67 000 Mt, nearly 10% of the world total (World Energy Council, 1992). The upper part, e.g. the Beaufort Group, has been subdivided into a number of biozones based on vertebrate assemblages. Subdivision of the lower Karoo is based on plant fossils, including spores and pollen. Recently, some success is being achieved in dating thin volcanic ash (K-bentonite) layers. A summary description (from young to old) is in Table 5.2. 5.3.8. Recent sedimentary and volcanic rocks of the East African Rift System Renewed continental extension lead the development of the great East African Rift System (EARS). An eastern branch can be followed from south of Lake Niassa (Lake Malawi) into the Afar Triangle (Ethiopia) and further into the Red Sea, a young ocean. The Western Rift of the East African Rift System branches off the Eastern Rift north of Lake Niassa (Lake Malawi) and describes an arc-like structure of 1500 km of length till the Albert Lake in northern Uganda. It obviously follows older crustal weakness zones in the Ubendian and Kibaran fold belts. Rift Valley faulting started during Cretaceous time but greatly accelerated during late Cainozoic time (Figs. 5.6. and 5.7.) Rifting started with regional uplift between 120 and 75 Ma. In East Africa this caused uplift along the Western and Eastern Rift and subsidence in the central part with the formation of Lake Nyanza, the bigger predecessor of Lake Victoria. These differential vertical movements caused a new phase of erosion and deposition with the desiccation of old peneplains and the formation of a new drainage system. Incipient development of the East African Rift System coincides with the emplacement of a family of carbonatites and associated rocks in east Africa that is called the Chilwa Alkaline Province after the ‘type-locality’ on Chilwa Island in Lake Chilwa10 in southeastern Malawi. 9 The Dwyka Formation (see Table 6.3) has been upgraded to Group (Johnson et al. 1996) 10 Lake Chilwa in Malawi is named Lago Chirua in Mozambique. Volume 2 Chapter Five Page 110 Courtesy Paul Dirks 2003 Cretaceous Failed Rifts a = Benue trough e = Doba-Doseo basin i = Melut basin b = Gao basin f = Muglad basin j = Anza basin c = Tenere basin g = White Nile rift k = Sirt basin d = Bongor basin h = Blue Nile rift l = Lower Zambezi basin Cretaceous Rifts Developed into Passive Margins of the African Craton A = North Atlantic Margin (~200 Ma) B = South Atlantic Margin (~135 and 115 Ma) C = Indian Transform Margin (~165 Ma) Cretaceous-Tertiary Sag Basins I = Taoudeni basin III = Chad basin V = Ogaden basin II = Iullemeden basin IV = Congo basin Fig. 5.6. Break-up of Gondwana (180 – 40 Ma) (Dirks and Ashwal, 2002). Volume 2 Chapter Five Page 111 Current hot spot positionCurrent hot spot positionCurrent hot spot positionCurrent hot spot positionCurrent hot spot positionCurrent hot spot positionCurrent hot spot positionCurrent hot spot positionCurrent hot spot position 50 My ago50 My ago50 My ago50 My ago50 My ago50 My ago50 My ago50 My ago50 My ago 100 My ago100 My ago100 My ago100 My ago100 My ago100 My ago100 My ago100 My ago100 My ago 150 My ago150 My ago150 My ago150 My ago150 My ago150 My ago150 My ago150 My ago150 My ago Hot Spot tracksHot Spot tracksHot Spot tracksHot Spot tracksHot Spot tracksHot Spot tracksHot Spot tracksHot Spot tracksHot Spot tracks nnnnnnnnn ppppppppp hhhhhhhhh ggggggggg iiiiiiiii ooooooooo kkkkkkkkk lllllllll mmmmmmmmm jjjjjjjjj ATLAS OROGENATLAS OROGENATLAS OROGENATLAS OROGENATLAS OROGENATLAS OROGENATLAS OROGENATLAS OROGENATLAS OROGEN Quaternary volcanicsQuaternary volcanicsQuaternary volcanicsQuaternary volcanicsQuaternary volcanicsQuaternary volcanicsQuaternary volcanicsQuaternary volcanicsQuaternary volcanics Tertiary volcanicsTertiary volcanicsTertiary volcanicsTertiary volcanicsTertiary volcanicsTertiary volcanicsTertiary volcanicsTertiary volcanicsTertiary volcanics Mesozoic volcanicsMesozoic volcanicsMesozoic volcanicsMesozoic volcanicsMesozoic volcanicsMesozoic volcanicsMesozoic volcanicsMesozoic volcanicsMesozoic volcanics Mid-Tertiary and younger coverMid-Tertiary and younger coverMid-Tertiary and younger coverMid-Tertiary and younger coverMid-Tertiary and younger coverMid-Tertiary and younger coverMid-Tertiary and younger coverMid-Tertiary and younger coverMid-Tertiary and younger cover Alpine faulting & faultingAlpine faulting & faultingAlpine faulting & faultingAlpinefaulting & faultingAlpine faulting & faultingAlpine faulting & faultingAlpine faulting & faultingAlpine faulting & faultingAlpine faulting & faulting along E African riftalong E African riftalong E African riftalong E African riftalong E African riftalong E African riftalong E African riftalong E African riftalong E African rift ccccccccc ddddddddd eeeeeeeee fffffffff aaaaaaaaa bbbbbbbbbA stationaryA stationaryA stationaryA stationaryA stationaryA stationaryA stationaryA stationaryA stationary African plate30-0 MaAfrican plate30-0 MaAfrican plate30-0 MaAfrican plate30-0 MaAfrican plate30-0 MaAfrican plate30-0 MaAfrican plate30-0 MaAfrican plate30-0 MaAfrican plate30-0 Ma Courtesy Paul Dirks 2003 Hot spots and Their Tracks Below the African Plate a = Ascension g = Shona m = Mt. Cameroon b = St Helena h = Bouvet n = Afar c = Tristan da Cunha i = Marion o = Victoria d = Gough j = Hoggar p = Comores e = Discovery k = Tibesti f = Vema l = Jebel Mara Fig 5 7 Africa in the Tertiary Quaternary (30 Ma Recent) (Dirks and Ashwal 2002) 5.4. GEODYNAMIC PRINCIPLES 5.4.1. Wilson or Supercontinent Cycles The evolution of Africa’s chrono-magmatic-tectonic provinces – the ‘building blocks’ – all related to major geodynamic events, can be viewed in terms of Supercontinent or Wilson Cycles. In its simplest form, a Wilson Cycle involves formation of a Supercontinent from smaller continental blocks, followed by fragmentation and then by re-assembly of a new Supercontinent. Most computer models of Wilson Cycles suggest that continental break-up and fragmentation is caused by shielding of the mantle by a large plate that carries the Volume 2 Chapter Five Page 112 Supercontinent which, in turn, results in mantle upwelling beneath the plate during a period of 200 – 500 Ma (Gurniss, 1988; Lowman and Jarvis, 1999; Condie, 2002). Mantle plumes, developing in a mantle upwelling (Courtillot et al. 1999; Golonka and Bocharova, 2000), in combination with pre-existing weakness zones of crustal or lithospheric dimension define the actual sites of fragmentation. Supercontinents formed at 2.7 Ga, 1.9 Ga, 1.2 – 1.0 Ga (Rodinia), 650 – 550 Ma (Gondwana) and 450 – 250 Ma (Pangea) (Condie, 1998, 2000, 2001). The youngest orogenic peak at 100 – 50 Ma, as expressed by the Alpine-Cordilleran fold belts, can be considered as the first step in the formation of a future Supercontinent. Although periods of fragmentation (at one location) and collision (at another location) may overlap, it is justifiable to translate the above Cycles into periods of crustal extension and compression, each characterised by specific geodynamic processes. The coeval development of the extensive East African Rift System (EARS) and the continuous compressive movement of the Indian craton below Asia may serve as a modern analogue. Mantle upwelling results in mantle plumes, doming and crustal extension. The emplacement of small volumes of ultra-potassic magmatic rocks (carbonatite, kimberlite and associated alkaline or ultra-potassic igneous rocks) heralds incipient rifting. Mantle plumes generate beneath the lithosphere, measure typically 2000 km in diameter and have temperatures raised 200° C above normal (White and McKenzie, 1989). Mantle upwelling causes an adiabatic rise of mantle rock, partial melting and the formation of large volumes of magma of basaltic composition. These magmas may be emplaced at or near the base of the continental crust (‘basaltic underplating’) and/or, extrude to the Earth’s surface, coeval with continental break-up, as continental flood basalts (CFBs). The Deccan of India, the Paraná of South America and the Karoo of southern Africa are well-known examples. Basaltic underplating generally causes partial melting of the lower crust and the generation of melts of granitoid composition. Together they may form bi-modal igneous suites, characterised by interbeds of rhyolite or tuff in the sedimentary pile (see below) in combination with sills or dykes of basaltic composition. Plutonic equivalents include pre- to early-kinematic granites and granodiorites and layered (ultra-)mafic suites. The granitoids have generally a peraluminous S-type geochemical signature. Differentiation of basaltic magma may result in A-type alkali granites as described, for example, by Tack et al. (1994), in association with late-kinematic (ultra-)mafic layered bodies, in the northern Kibaran of Burundi and northwestern Tanzania. Crustal extension leads to rifting by listric faulting. The net result will be crustal thinning and the formation of depositional basins that will be filled with sediments including evaporites, terrigenous sediments and igneous material at or near the surface. The latter is co- magmatic with pre- to syn-kinematic basalts and granitoids at depth. Rifting and crustal thinning may cease without formation of oceanic crust: an aborted or failed rift. Continued rifting will eventually result in continental break-up with passive margins and the formation of a young oceanic basin. Passive margin basins are often characterised by shallow marine environments and the deposition of carbonates. Carbonates have rather restrictive occurrences, constituting only ~ 2% of the rocks of the Earth’s crust (Wyllie, 1971). Consequently, carbonates, or their metamorphic equivalents, are useful in defining palaeo- continental margins. Ophiolites and eclogites, or their metamorphic equivalents, are also useful indicators of continental margins. Ophiolites are fragments of hot oceanic crust obducted onto – instead of subducted below – the continental margin. They are often intermingled with sedimentary Volume 2 Chapter Five Page 113 rocks, forming so-called ‘mélanges’. Retrograde metamorphism, hydration and metasomatism may result in the genesis of whiteschists, characterised by, e.g., talc-kyanite assemblages. Eclogites in metamorphic belts originate from deeply buried (~ > 10 kb; Newton, 1986) ocean floor basalt in subduction settings, exhumed during subsequent plate margin collisional orogenies. Their preservation is ascribed to rapid exhumation as mantled relics, preventing complete re-equilibration. Eclogite fragments may also be carried to the surface as xenoliths by deep intracratonic volcanic vents. The distribution of supracrustal rocks, including carbonates, ophiolites and eclogites in Mozambique has been summarised by Grantham et al. (2002) and is based on data by Vrana et al. (1975), Andreoli and Hart (1985), Mosley (1993), Groenewald (1995), Möller et al. (1995) and Dirks (1997). Posterior reassembly of continental fragments, ultimately resulting in the formation of the next Supercontinent, will generate compressional forces. Compressional forces affecting failed rifts may give rise to back-thrusting of the listric fault blocks and folding and metamorphism of the basinal sedimentary pile: an intracratonic fold belt. Crustal thickening may cause anatexis of the lower crust. Consumption of oceanic basins and subduction of wet oceanic crust will result in the creation of island or Andean-type continental magmatic arcs and eventually in collision and amalgamation of lithospheric fragments. Passive margin sediments will be tectonised and metamorphosed in the process. Igneous rocks in magmatic arcs typically have calc-alkaline signatures. They include volcanic piles dominated by andesites and dacites with subordinate basalts and rhyolites or as their plutonic equivalents in the form of tonalities, trondjhemites and granodiorites (TTG suites) with relatively low 87Sr/86Sr ratios. High heat flow generally associated with magmatic arcs cause HT/LP metamorphic conditions manifested by mineral assemblages characteristic of upper amphibolite to granulite facies, generally accompanied by extensive migmatisation. The most recent Supercontinent assemblies pertinent to southern and eastern Africa include Rodinia and Gondwana/Pangea. Rodinia assembledlargely between 1200 and 1000 Ma during the Grenvillian Orogeny (Hoffman, 1991; Jacobs et al. 1993; Grantham et al. 1997, Wareham et al. 1998; Manhiça et al. 2001; Condie, 2002a), represented regionally by the Kibaran, Irumide and Namaqua-Natal fold belts. Rodinia rifting commenced around 1000 Ma and included extension in eastern and southern Africa as manifested by, for example, the Richtersveld igneous suite, South Africa (Frimmel et al. 2001) and, within western Mozambique, by the emplacement of 850 – 870 Ma bi-modal igneous rocks contained in the Masoso and Guro Suites (Vinyu et al. 1999; GTK Consortium, 2006b) and the Rushinga Basal Intrusive Suite dated at 805±11 Ma (Vinyu et al. 1999). Although most fragmentation took place between 900 and 700 Ma, the opening of the Iapetus Ocean began around ~ 600 Ma with the separation of Baltica-Laurentia-Amazonia. Gondwana assembled chiefly between 600 and 500 Ma (Condie, 2002a) although earlier (850 – 750 Ma) collisions have been reported in the Arabian-Nubian Shield (Hanson et al. 1994; Stein and Goldstein, 1996). The assembly of Gondwana thus followed immediately the break- up of Rodinia with some overlap in timing between 700 and 600 Ma. Baltica-Laurentia- Siberia briefly collided with Gondwana to form the short-lived Supercontinent Pannotia between 580 and 540 Ma (Dalziel, 1997). Pangea began to form about 450 Ma with the collision of the Pre-Cordillera-Rio de la Plata, Amazonia-Laurentia and Laurentia-Baltica collisions and amalgamations (Li and Powell, 2001). Further growth was caused by collision between Baltica and Siberia as manifested by the Ural orogeny (Scotese and McKerrow, 1990). Rifting of Pangea started Volume 2 Chapter Five Page 114 around 180 Ma with the development of the Indian and South Atlantic oceanic basins and, on the African continent, numerous Karoo preservation troughs. 5.4.2. Superplumes Based on the distribution of ages in continental crust, Condie (1998, 2000) proposed episodic growth of continents with each maximum in continental growth manifesting a superplume event. Superplumes are supposedly triggered by catastrophic slab avalanching at the 660-km mantle discontinuity (Maruyama, 1994; Condie, 1998). Consequently, many mantle plumes are generated that bombard the base of the lithosphere in a short period of time (≤ 50 Ma). When plotted in time, superplumes represented by culminations in juvenile crust production, can be correlated with the formation of Supercontinents. Only two major superplume events can be established in the Precambrian at 2.7 and 1.9 Ga, respectively. Phanerozoic superplumes include a small peak in crustal growth in the Late Cretaceous at ~110 Ma and a Late Palaeozoic peak at ~ 300 Ma. The Grenvillian orogeny and the formation of Rodinia cannot be correlated with a superplume event. Rogers (1996) has suggested that during the 1.9 supercontinent/ superplume event (in Africa to be correlated with the Ubendian orogeny, see Fig. 5.1) actually two Supercontinents formed. Lack of a Grenvillian superplume event may be due to either subsequent failure of the two Supercontinents to break-up or to inadequate lithospheric shielding of two instead of a single Supercontinent for the production of mantle upwellings large enough to break the continental lithosphere (Lowman and Jarvis, 1996). Condie (2001) suggests that during the Supercontinent break-up at 1.6 – 1.4 Ga only a small proportion of the Supercontinent (or Supercontinents) was fragmented. The resulting increase in subduction rates was not sufficient to initiate slab collapse at the 660-km seismic discontinuity, which would normally lead to a superplume event (Larson, 1991; Maruyama, 1994; Condie, 1998). Consequently, worldwide Grenvillian juvenile crust (1.35 – 0.9 Ma) is limited to only 7 to 13%. Of this, only a minor proportion was created in Africa with estimates ranging from 0.9 to 1.6% and located in the Namaqua-Natal orogen in southern Africa, the Lurio belt in Mozambique, northeastern Tanzania and Burundi/northwestern Tanzania (Condie, 2001; see also Figure 5.2). 5.5. GEOCHRONOLOGY, WITH EMPHASIS ON NEW DATA 5.5.1. Phanerozoic Cover The Phanerozoic cover comprises sedimentary strata and associated igneous rocks belonging to the East Africa Rift and Karoo Supergroups, deposited during the East Africa Rift and Karoo Events, respectively. Traditionally, the age of sedimentary rocks belonging to the East Africa Rift Super- group is based on marine and fresh water fossils and palynology. Geochronological data are available from alkaline volcanic rocks of the Lupata Group, yielding an Early-Middle Cretaceous (K-Ar) age of 131±10 Ma (Gough et al. 1964; Flores, 1964; Vail, 1963, 1964, 1965) within the succession. The Karoo Supergroup in the Main Karoo Basin in South Africa ranges in age from Late Carboniferous to Early Jurassic. Dating and lithostratigraphic classification of sedimentary units is mainly based on non-marine vertebrate and plant fossils. For example, Volume 2 Chapter Five Page 115 the Beaufort Group in the Main Karoo basin in South Africa has been successfully subdivided into eight fossil assemblage zones. A palynological biozonation has proved feasible for the Permian strata in some Karoo basins. Basalts and acid lavas of the Drakensberg Group that top the Karoo Supergroup yield K-Ar and Rb-Sr ages of ~ 180 Ma. A similar age for this late Karoo igneous event has been found in e.g. Antarctica and elsewhere. Rocks belonging to the Karoo Supergroup in Mozambique are also dated by their fossil content, or by analogy with Karoo successions in neighbouring countries. Recently, septarian carbonate concretions in siltstones incorporated into the Beaufort Group (K5 and K6) of the Metangula rift (Niassa Province) have been dated using the ‘U-Pb on carbonates’ method. Preliminary results (pers. comm. R.A. Smith) manifest that: • The ‘U-Pb on carbonate method’ yields an isochron Late Permian age (258±10 Ma) that falls within the Mid-Permian to Mid-Triassic time brackets (275 – 225 Ma) for the Beaufort Group, based on palaeontology and palaeobotany. • The Ecca-Beaufort boundary in the Metangula Rift is diachronous. 5.5.2. Crystalline Basement Kennedy (1964) introduced the term Pan-African orogeny. He preferred, however, the term ‘Pan-African thermo-tectonic episode’ manifesting the fact that evidence for this orogeny was initially mainly derived from conventional whole rock Rb-Sr and K-Ar geochronology yielding ages of about ~ 650 to 490 Ma for presumably older rocks (Cahen and Snelling, 1966). As can be expected in polyphase terrains, the above data display large to excessive error margins, reflecting either incomplete resetting of the isotopic system, material losses through circulation of metamorphic fluids or diffusion. Modern geochronological methods such as Ar/Ar, conventional U-Pb, U-Pb SHRIMP, Sm-Nd and Nd model ages (TDM) have greatly improved the reliability and accuracy of rock metamorphic and igneous emplacement ages. Grantham et al. (2002) has summarised geochronological data in eastern Africa. Metamorphic ages and Nd model (TDM) ages are relatively scarce in Mozambique. TDM ages of < 1.5 Ga in the Tete area and northern Mozambique and 1.5 to >2.0 Ga in central Mozambique near the Zimbabwe craton confirm that the metamorphic ages, ranging from 450 to 750 Ma, reflect indeed overprinting on older crystallisation ages. Igneous crystallisation temperatures can be divided into four groups: (1) 1100 – 1400 Ma, (2) 900 – 1100 Ma, (3) 700 – 900 Ma and (4) 450 – 700 Ma. It is postulated that the first group (1100 – 1400 Ma) corresponds to the post-Ubendian break-up including the formation of oceanic crust (e.g. Chewore Inlier; Zimbabwe); the second group (900 – 1100 Ma) with the Kibaran/Grenvillian orogeny and the formation of the Rodinia Supercontinent, the third group (700 – 900 Ma) with post-Rodinia break-upand the formation of oceanic basins including the Mozambique Ocean and, finally, the fourth group (450 – 700 Ma) with the Pan-African collision and the formation of Pangea (for details see Chapter 8). Different tectonic regimes at different locations at the same time complicate, however, this regional picture. For example, an ~ 800 Ma igneous event in the Zambezi belt is interpreted as extensional by Dirks et al. (1998). U-Pb zircon and baddeleyite ages of between 804 and 776 Ma from Tanzania and Madagascar are related to a 450 km long continental magmatic arc at the time of, or slightly preceding the break-up of Rodinia. Volume 2 Chapter Five Page 116 Meert (2002) recognises three broad age groups related to tectonic phases. These include (1) the initial oceanic arc/ophiolite genesis in the East African orogeny (EAO) between ~ 710 and 800 Ma. This was followed by (2) the EAO between ~ 690 and 580 Ma in a N-S belt stretching from the Arabian-Nubian Shield to northern Mozambique and (3) the Kuunga orogeny from ~ 580 to 460 Ma in ~ E-W and N-S zones along the northern and eastern margins of the Kalahari craton. The GTK Consortium has carried out 36 age determinations of which 19 fall within the area covered by this Map Explanation. Employed methods include conventional U-Pb, SHRIMP and Sm-Nd dating. The methods are discussed in section 2.5.2., and the results presented in App. 2. 5.6. TERRANES IN MOZAMBIQUE Lithostratigraphic units that underlie the territory of Mozambique can be conveniently divided between the crystalline basement of Archaean-Cambrian age and Phanerozoic cover. The crystalline basement comprises a heterogeneous assemblage metamorphosed supracrustal paragneisses, granulites and migmatites, orthogneisses and igneous rocks. The Phanerozoic cover mainly comprises lithologies deposited during the Karoo and East African Rift Events. They will be assembled into the Karoo Supergroup and East African Rift, respectively. From a geodynamic point of view it is generally accepted that the crystalline basement of Mozambique is composed of three different terranes11 that have been collided and amalgamated during subsequent orogenic phases. Prior to amalgamation, each terrane was characterised by an individual and specific geodynamic development. The geodynamic evolution and boundaries – the sutures – of these terranes will be discussed in Chapter 8. Provisionally, these terranes are called the East Gondwana, West Gondwana and South Gondwana terranes (Table 5.3). 9 The term ‘terrane’ is used to indicate a tectonic unit of variable size, i.e., a lithospheric plate, a plate fragment or sliver or a tectonic mass such as a ‘nappe’. ‘Terrain’, on the other hand, is a generic term, broadly similar to ‘area’. Volume 2 Chapter Five Page 117 Being located close to a triple junction between the Irumide, Zambezi (~850 – 450 Ma) and Mozambique belts, the basement geology of the Tete province (including the northern part of the Manica Province) is extraordinarily complex with the above three terranes all being present. South Gondwana – Comprises the Zimbabwe craton and a number of tectono- or lithostratigraphic units that have been thrusted or deposited on top of the northern and eastern margin of the craton. It is separated from the other terranes by the Zambezi and Lupata Troughs. West Gondwana – In Tanzania the west-verging thrust front of the Mozambique belt marks the boundary between the West and East Gondwana terranes. Further southwards this suture is less well defined but in the Tete area this suture is believed to correspond with the contact with the NW-SE trending Furancungo Suite (Desaranhama Granite) and Angónia Group. The Tete-Chipata Block is part of the West Gondwana terrane. It is a triangular crustal block bounded by the E-W trending Sânangoè Shear Zone (or Mágoè-Estima Fault Zone sensu Hunting, 1984) in the south and the Mwembeshi dislocation in the north. The Tete- Chipata block is characterised by generally WSW-ENE trends. East Gondwana – In Tanzania this comprises the crystalline basement east of the Pan- African suture. Further southwards it comprises most rocks in Malawi and northern Mozambique The crystalline basement in the area covered by this Map Explanation (Volume 2) belongs almost entirely to the South Gondwana Terrane and the Tete Gabbro-Anorthosite Suite (TGAS). The South Gondwana terrane comprises the Archaean Zimbabwe Craton – being part of the larger Kalahari craton – and a number of overthrusted units in Proterozoic fold belts that will be discussed in Chapters 6 and 7, respectively. The Tete Suite is considered an allochthonous thrust mass, now largely located south of the Sânangoè Shear Zone but most likely originating from the West Gondwana Terrane, to the north thereof. Table 5.3. Basement terranes in Mozambique. Cover East African Rift Supergroup Karoo Supergroup South Gondwana terrane West Gondwana terrane East Gondwana terrane Mavuradonha Metamorphic Complex Báruè Complex Umkondo Group Rushinga Metamorphic Complex Gairezi Group Zimbabwe Craton Matunda Suite Mualádzi Group Fíngoè Supergroup Zâmbuè Supergroup Cazula Group Chidzolomondo Group Basement Tete Suite Unango Group Lúrio Supergroup Nampula Supergroup Mecubúri Group Muaguide Group Chiúre Supergroup Meponda Group Angónia Group Volume 2 Chapter Six Page 118 CHAPTER 6 SOUTH GONDWANA BASEMENT – KALAHARI CRATON 6.1. INTRODUCTION The Kalahari Craton (~ 1.5 million km²) comprises the Kaapvaal and Zimbabwe Cratons, together with the intervening Limpopo mobile belt. The Kaapvaal Craton and the Limpopo Belt do not extend into the area covered by this Map Explanation. The Zimbabwe Craton underlies most of Zimbabwe as well as parts of northeastern Botswana and western Mozambique (Fig. 6.1). The craton is largely composed of a so-called granite-greenstone terrane comprising mainly granite-gneiss-migmatite complexes of tonalitic to trondhjemitic to granitic (TTG) composition and subordinate (~20 % of the surface area) greenstone belts. The greenstone belts of the Zimbabwe Craton are in 26 individual linear or arcuate infolded belts, up to several tens of km long, of which two extend into Mozambique (i.e., the Mutare-Manica and Cronley-Munhinga greenstone belts, respectively). The greenstone belts are composed of generally low-grade meta-sediments, including banded iron formations (BIF), and volcanic rocks. Fig. 6.1. Simplified map of the Zimbabwe Craton showing the major litho-tectonic units (after Hofmann et al. 2002). Key: 1 = Mutare-Manica greenstone belt; 2 = Makaha greenstone belt; 3 = Bindura-Shamva greenstone belt. The northern Archaean gneiss terrain comprises the allochthonous Migmatic Gneiss Terrane (MiGT). The oldest rocks of the Zimbabwe Craton are TTG gneisses have been dated between 3.55 and 3.35 Ga (e.g., Horstwood et al. 1999). Infolded are remnants of greenstones that are collectively grouped into the Sebakwean Group. Subsequent accretion added greenstones of the ~ 2.9 to 2.8 Ga Belingwean and Lower Bulawayan Groups. A major phase of rock Volume 2 Chapter Six Page 119 formation took place between ~ 2.7 and ~ 2.64 Ga and resulted in the deposition of the widespread volcanic succession of the Upper Bulawayan Supergroup and and the metasedimentary Shamvaian Supergroup which overlies the Upper Bulawayan in several greenstone belts (Wilson et al. 1995). Deposition of the supracrustal greenstone belt sequences was accompanied by emplacement of granitoids of tonalitic to granodioritic composition of the ~2.9 to 2.8 Ga Chingezi, ~ 2.7 Ga Sesombi, ~ 2.65 Wedza and ~2.6 Ga Chilimanzi Suites (Wilson et al. 1995; Jelsma et al. 1996). A simplified lithostratigraphy of the Zimbabwe Craton (mainly after Hofmann et al. 2002) is shown in Table 6.1. Table 6.1. Simplified lithostratigraphyof the Zimbabwe Craton (mainly after Hofmann et al. 2002). Central Zimbabwe N and E Zimbabwe, Mozambique Great Dyke (2575 Ma) Mavonde Complex ~ 2.6 Ga Chilimani Suite ~ 2.64 Ga Shamvaian Supergroup M’Beza/Vengo Formation* ~ 2.65 Ga Wedza Suite ~ 2.70 Ga Upper Bulawayan Supergroup M an ic a G ro up Macequece Formatiom ~ 2.7 Ga Chingezi Suite 2.9 – 2.8 Ga Belingwean-Lower Bulawayan Supergroup Migmatic Gneiss Terrain G ra ni te -G re en -s to ne Te rr ai n ~ 3.5 Ga > 2.95 Ga Sebakwean Supergroup ~3.0 Ga Pfungwe Suite Mudzi Suite Basement Complex (> 3.5 Ga) The presence of Archaean rocks in small round to oval-shaped windows below Proterozoic units close to the Zimbabwe-Mozambique border has been known for some time. Mapping by the GTK Consortium has evidenced the predominance of Archaean rocks in Mozambique in a N-S belt, 20 to 50 km wide, along the international border. For a long time geologists have speculated on the sub-surface northern and eastern extension of the Zimbabwe Craton. There is strong evidence that the Archaean lithosphere extends sub-surface up to the Cahora Bassa Lake (i.e., the Sanangoè Shear Zone) in the north and – at least – the the western margin of the Lupata trough in the east, possibly even including the Lupata trough itself. This hypothesis is strongly supported by the distribution of Karoo volcanics in, e.g., the Lebombo Monocline, Limpopo Belt-Nhamatanda and Canxixe. Basaltic underplating apparently concentrated at or near the break of the lithospheric upper mantle, i.e., from thick Archaean upper mantle to younger upper mantle of normal thickness. This means that all Proterozoic metamorphic units of the South Gondwana Terrane – with the exception of the undeformed/non-metamorphic Umkondo Group – have been thrusted on top of the northern and eastern margins of the Zimbabwe Craton. 6.1.1. Migmatic gneiss terrane Archaean gneiss-migmatite terranes bound the central granite-greenstone terrain of the Zimbabwe Craton along its southern and northern border. The northern allochthonous terrane is known as Migmatic Gneiss Terrane (Barton et al. 1991) and extends into Mozambique. It consists of a complex sequence of amphibolite-facies para- and orthogneisses with local relics of granulite-facies paragenesis. Stratigraphically, the MiGT can be divided into the (1) Volume 2 Chapter Six Page 120 Pfungwe Metamorphic Suite (in the north) and (2) Mudzi Metamorphic Suite12 (northeastern and eastern margin). The first is composed of approximately equal proportions of sedimentary and igneous protoliths. The Mudzi Metamorphic Suite, which extends into Mozambique, is similar, though there are far greater proportions of granitoid gneisses. 6.1.2. Granite-Greenstone Terrane Towards the south, the northern Migmatic Gneiss Terrane (MiGT) grades into the granite- greenstone terrain of central Zimbabwe through a 5 to 10 km wide zone showing a progressive decrease in grade of metamorphism and deformation (Barton et al. 1991; Jelsma et al. 2002). In the Manica area and further southwards the granite-greenstone terrain of the Zimbabwe Craton is represented by the Mutare-Manica and Cronley-Munhinga greenstone belts, located some 50 km apart, by ‘Older Granites’ and by granitoids assembled in the Mavonde Complex. In Mozambique, the greenstone sequence of the Mutare-Manica greenstone belt is assembled as the Manica Group and divided into the metavolcano- sedimentary Macequece* (bottom) and metasedimentary Vengo (top) Formations*. The metavolcanic rocks of the Cronley-Munhinga greenstone belt are attributed to the Munhinga Group. The greenstones and metasediments can be correlated with the Upper Bulawayan and Shamvaian Supergroups in Zimbabwe, respectively (Table 6.1). Mutare-Manica greenstone belt This belt is the only major greenstone belt that extends from Zimbabwe into Mozambique. It crosses the border just north of the city of Mutare in Zimbabwe (formerly Umtali) and is known as Mutare greenstone belt (Zimbabwe) or Manica greenstone belt (Mozambique). The older names of Odzi Gold Belt and Umtali Gold Belt refer to distinct gold-bearing segments of the greenstone belt. The Mutare belt is part of a string of elongate greenstone belts, which lie along a regional curvilinear feature termed the Sandawana-Masvingo- Mutare line (Coward et al. 1976; Vearncombe et al. 1988) (Fig. 6.1.). East of Manica this belt bends sharply towards the north and terminates soon after. Isolated bodies of greenstone rocks, surrounded by ‘grey gneisses’ and belonging to the greenstone belt, still occur towards the north. South of the belt, a narrow 1 – 2 km wide strip of mainly ultramafic metavolcanics is separated from the main belt by granitoids. Greenstones in the Manica area were the centre of mining activity in Mozambique in the first half of 20th century and contain substantial known resources of gold, copper, bauxite and asbestos. The Mutare-Manica greenstone belt can be subdivided into a NE-SW trending part in the west, referred to as the Odzi segment, and an E-W trending part in the east, the Mutare segment. The Odzi segment stretches from Nyashanu in the SW to Odzi in the NE over a distance of 70 – 75 km and its overall width is less than 5 km. The Odzi segment will not be further discussed. 12 This should not be confused with the Mudzi Formation, a massive to pillowed metabasalt unit constituting the eastern part of the Makaha greenstone belt (Johnson, 1968; Stocklmayer, 1980). Volume 2 Chapter Six Page 121 Mutare Segment The Mutare segment extends over a distance of some 60 km, from Odzi to east of Manica in Mozambique. Its width varies between 10 and 15 km. A narrow (1 – 2 km) strip of ultramafic rocks, surrounded by granitoids, stretches E-W over ~ 20 km, south of Mutare but stops near the Mozambique border. From a structural point of view, the Mutare segment is a synclinorium, 5 to 15 km wide that is markedly asymmetric with a subvertical, to slightly overturned, southern limb and a shallow-dipping northern limb comprising a syncline- anticline-syncline succession. The axial trace of the anticline separating the two major synclines follows the BIF unit that forms the high ground between the Mbeza and Penhalonga valleys. The southern Mbeza syncline continues approximately 5 km into Mozambique, where the plunge becomes westerly. The eastward-plunging northern Penhalonga syncline becomes the major greenstone belt fold structure in Mozambique. A strong indication manifesting a sinistral transpression regime is the left-stepping, en- échelon configuration of the major E-W trending folds in relation to the overall ENE-WSW strike of the belt. The foliation is subvertical and strikes parallel to the lithological contacts. The mineral stretching and elongation lineations plunge shallowly to the east and are near- coaxial with the fold-plunge direction. The sheared unconformity between Upper Bulawayan talcose serpentinites and Shamvaian Supergroup metasediments on the northern side of the Mbeza syncline is well exposed in a road cut in the Mbeza River valley, south of the Redwing gold mine. Near-concordant zones of patchy silicification and carbonatisation characterise the ultramafic rocks. A dominantly reverse component of shear is suggested in places. Folds in the Shamvaian Supergroup metasediments of the Mbeza syncline are open and plunge ENE-WSW, with development of a slaty, locally phyllitic, cleavage in the finer- grained argillite and tuff units. The S1 fabric is subject to localised kink folding along NNW- SSE axes. Bedding-cleavage relationships suggest that the southern margin of the metasedimentary unit is also a locus for reverse-dominated shear. On the southern flank of the synclinorium, the main flattening fabric in the ultramafic-dominated greenstonesequence consistently dips southward at a moderate to steep angle. Elongation lineations plunge shallowly to the WSW. Cronley-Munhinga greenstone belt The larger part of the Cronley schist/greenstone belt13 or Munhinga-Bande belt14 is situated in Mozambique. The belt occurs south of Lago Chicambo Real on the Revuè River, about 50 – 55 km south of the Mutare-Manica greenstone belt. It is visible in the aerial photographs and satellite images as a narrow (max. 2 km), curvilinear range of low hills that stretches ENE from beneath Umkondo Group sediments (see Section 6.5.) in the west to Gairezi/Fronteira Group sediments (see Section 7.6.) in the east. The length of the combined mapped occurrence in Zimbabwe and Mozambique is of the order of 35 – 40 km. In Zimbabwe, the belt consists of quartz-sericite-schist and greenstones with lenses of serpentinite and an isolated domain of quartz-rich BIF, all attributed to the Upper Bulawayan Supergroup. 13 Cronley belt: this name is used in Hunting (1984) with a (non-detailed) reference to Watson (1969). No information has been found concerning the origin of the term. In fact, no locality with that name is referenced in present-day Zimbabwe. 14 Rio Munhinga and Rio Bande drain the areas respectively south and north of the belt in Mozambique. Volume 2 Chapter Six Page 122 Similar lithologies and stratigraphic position are presented in the 1987 1:1 000 000 geological map (Pinna et al. 1987) of Mozambique. Granitoids Granitoids – a mixture of gneisses, variably deformed granites and granodiorites and migmatites – constitute the bulk of granite-greenstone terrains. In Zimbabwe the oldest granitoids are attributed to the > 3.5 Ga ‘Basement Complex’ and granitoids associated with the > 2.95 Ga Sebakwean. Younger greenstone belts are associated with the ~ 2.7 Ga Chingezi, the ~ 2.65 Ga Wedza and the ~ 2.6 Ga Chilimani Suites, respectively (Table 6.1.). The boundaries between the different generations of granitoids are complex and difficult to establish. It would require detailed mapping, supported by extensive lithogeochemistry, petrography and geochronology. This not being the case, the felsic rocks of the granite- greenstone terrain of the Zimbabwe Craton in Mozambique have been divided into granitoids broadly coeval or younger than the greenstone belt sequences contained in the Manica Group and ‘older granitoids’. The first have been grouped into the Mavonde Complex. ‘Older Granitoids’ in Mozambique have not been mapped as individual polygons but were identified in geochronological samples. 6.1.3. Archaean Rocks in Mozambique Archaean rocks are exposed in the map sheets Mucumbura/Chioco (1631/1632), Tete (1633, (SW corner only), Guro (1732/1733), Manica/Catandica (1832/1833) and Rotanda/Chimoio (1932/1933) in all of them representing the eastern margin of the Archaean Zimbabwe craton in the Mozambican side. Rocks along the northern part of the eastern Craton margin are attributed to the Mudzi Metamorphic Complex (Section 6.2.), part of the allochthonous Migmatic Gneiss Terrane (Barton et al. 1991). These rocks are mainly exposed in Map Sheet Guro (SDS 1732/1733) and the northern part of Manica/Catandica (SDS 1832/1833). Further southwards, the Craton’s eastern margin in Mozambique constitutes a continuation of the Zimbabwe granite-greenstone terrain. The lithologies of the greenstone belts are attributed to the Manica Group, which has been sub-divided into (from bottom to top) Macequece and Vengo Formations* of the Mutare-Manica greenstone belt. Rocks of the Cronley-Munhinga greenstone belt are attributed to the Munhinga Group. It would be logic to divide the felsic rocks of the granite-greenstone terrain in, at least, felsic rocks older and younger than the supracrustal rocks in the greenstone belts. The present state of mapping and, in particular, insufficient geochronological knowledge, does not allow this. Consequently, all felsic rocks (with minor ultramafic intercalations) have been attributed to the Mavonde Complex. Felsic rocks of the Mavonde Complex are exposed in the middle and southern part of the Manica/Catandica (SDS 1832/1833) and Rotanda/Chimoio (SDS 1932/1933). Volume 2 Chapter Six Page 123 6.2. MUDZI METAMORPHIC COMPLEX (A3M) 6.2.1. Introduction In Zimbabwe seven mappable units have been distinguished in the Mudzi Suite (from old to young: • Mapingisa Xenolithic Tonalite. • Granulite (and retrograde equivalents). • Mesocratic Orthogneiss. • Leucocratic Orthogneiss. • Garnet-Kyanite Gneiss. • Porphyroblastic Granite Gneiss. • Augen Granite Gneiss. Rocks in Mozambique equivalent to Mudzi Suite in Zimbabwe are assembled into the ‘Mudzi Metamorphic Complex’. Archaean rocks belonging to the Mudzi Complex are found ~ 50 km west of Changara (SDS 1632-1633) in several small and generally shallow outcrops, including road cuts at Cuchamano village (SDS 1632), close to the international border with Zimbabwe, and along local village roads to the north and south from there. Similar Archaean gneiss-migmatite rocks are exposed in the northern part of a small dome that extends to the extreme southeastern corner of the Chioco map sheet (SDS 1632), to the adjacent southwestern corner of the Tete map sheet (SDS 1633) and further southwards into the Guro map sheet (SDS 1732/1733). In the latter map sheet Mudzi lithologies are also in a number of dome-like and lensoid structures in the Massanga area (dated at ~ 2630 Ma), in the border areas of the Donga and Caueresi Rivers, the Senga-Senga area and elsewhere. A small dome of Archean gneisses outside any road on the boundary of SDS 1633 and DS 1733, has been dated (~ 2710 Ma), is well shown on satellite and geophysical maps and has been mapped at the scale 1:50 000. The area covered by Archaean rocks is larger than previously known but particularly the easternmost boundaries await more observation points for their improved definition. Commonly, these Archaean Mudzi dome structures are (tectonically?) overlain by metasediments of the Proterozoic Rushinga Group (in the north) or Gairezi Formation* (in the south). For example, excellent outcrops with easy access are situated in the village of Cuchamano, near the international border post to Zimbabwe, and upstream the Múdze River when entering there from the village of Múdze Chizimwe (Fig. 6.2). Prominent quartzite ridges of the Rushinga Group border Archaean outcrops east of Cuchamano. When approaching the Archaean domain from the east (along the Changara- Cuchamano road), a few kilometres before the international border, after crossing the rocky Rushinga ridges, the Archaean gneisses have given rise to an open, flat landscape at a lower topographic level. Before going down, one can see at distance, far within the Zimbabwean territory, a few scattered inselbergs within the otherwise flat Archaean terrain. The difference in geomorphological signature between Archaean and Proterozoic rocks is also evident on satellite imagery. Along the slope of Senga-Senga Mountain thin-skinned Mudzi banded gneisses and intercalated metagabbros with a shallow dip to the south are underlain and Volume 2 Chapter Six Page 124 overlain by Gairezi schists and quartzites. Parts of the same slab are exposed further east, at the Macossa road junction. The existing, rather detailed geological map on the Zimbabwean side and correlation of these data across the international border makes the Archaean- Proterozoic boundary as drawn on the Mozambican maps well reliable. Fig. 6.2. Profile across the Zimbabwe craton margin, drawn along the Múdze river channel, south of the Cuchamano village, lat. 17°02´. The banded gneisses, granites and mafic intercalates of the Archaean Mudzi Complex (grey) are overlain by supracrustal rocks of the Rushinga Group. The basement is well exposed upstream theriver, west of the Múdze Chizimwe village, as is also the sheared basement/cover junction. The early recumbent tectonic structure of the cover is affected, together with the basement, by later upright structure, well exposed in the vertical walls in the gorge across a quartzite ridge in the middle of the profile. 6.2.2. Lithology The rocks of the Mudzi Complex extend from the Zimbabwean side uninterruptedly to Mozambique in the Cuchamano area, at the NE corner of the Archaean Zimbabwe Craton (Map Sheet Chioco, SDS 1631/1632) and in Gairezi village area, ~ 60 km south of Cuchamano (Map Sheet Guro, SDS 1732/1733). Other exposures are within several separate domes and tectonic wedges in the area from Cuchamano to the northwestern part of the Manica/Catandica Map Sheet. Excellent outcrops with easy access are situated in and near the village of Cuchamano, at the international border post to Zimbabwe, and upstream the Múdze River when entering the village of Múdze Chizimwe (SDS 1633, Fig. 6.2, profile). Other subareas are accessible with more trouble except when a dome or a tectonic wedge coincides with a road. A poor village road that starts at the Macossa road junction and continues in a northwestern direction until the Zimbabwe border, intersects felsic rocks of the Mudzi Complex. Just south of this small road in the slope of the circular Senga Senga Mountain, to observe a thin skin stacked sequence of Archaean banded gneisses with tectonically intercalated Archaean metagabbros with shallow dip to the south, underlain and overlain by the Gairezi schists and quartzites. Volume 2 Chapter Six Page 125 Several mappable felsic to intermediate units of ortho-derivation, generally comprising TTG assemblages, have been identified: • quartz monzonite and quartz monzodiorite (A3Mqm); • foliated granitoid, porphyritic in places (A3Mgr); • TTG gneiss, foliated granitoid, magmatic U-Pb ages of 2600 – 2710 Ma (A3Mgn). Units with a mafic igneous component include: • granodiorite gneiss containing amphibolite bands (A3Mgd); • metagabbro (A3Mgb); • amphibolite, garnet amphibolite (A3Mam). Rocks with a sedimentary protolith include: • garnet gneisses (A3Mgg) The mutual stratigraphic relationships between these mappable units remain unknown. The succession in which these lithologic units will be discussed below and are portrayed in the legend has therefore no time-stratigraphic meaning. Quartz monzonite and quartz monzodiorite (A3Mqm) The rocks are relative massive compared to other Archaean rocks nearby. They are coarse grained, often texturally porphyritic and usually weakly deformed. Plagioclase phenocrysts are more common that those of K-feldspar. Fresh surface is dark and may have a brownish shade. The main minerals usually are plagioclase, quartz, biotite, hornblende and pyroxene. K-feldspar seems to be a subordinary mineral. In terms of the modal mineral composition, the most common rock type is tonalite and quartz diorite. Quartz monzodiorites and quartz monzonites are rare. In thin section the rock is often characterized by decomposition of hornblende and biotite, and the growth of retrogressive garnet. Chemical composition of clinopyroxene and amphibole in tonalitic rocke is shown in Table 2 (rock 1) of App. 4. The clinopyroxene has rather high Al2O3-content (1.9 wt%) compared to the intermediate composition of host rock. Moreover, FeOt/MgO is < 1. These values suggest, that the rock has undergone intense metamorphism, because pyroxenes in ‘postorogenic’, more or less unmetamorphosed charnockites in extensional environment have low Al2O3 contents (<1 wt%) and FeOt/MgO is >1. Also biotite and amphibole have relative low FeO/MgO. High TiO2 content (4.9 wt%) characterizes biotite. Foliated granite (A3Mgr) Foliated granites, partly just weakly orientated but in part also grey gneisses are met with the easternmost tectonic lenses, at Catandica and to the northeast, and as small bodies elsewhere, including Cuchamano. A cone-shaped hill 3 km north of Catandica, the ‘landmark’ of Catandica, belongs to this family. There is an aggregate rock quarry at the root of the hill. The rock of the quarry is rather fine grained, weakly banded and nonporphyritic. Porphyritic varieties are occasional in this assemblage. Volume 2 Chapter Six Page 126 Unexplained remained why there are scattered, several cm wide quartz-muscovite- sillimanite nodules in the rock in one observed case, northeast of Catandica (Obs. 1514-04, 0526431/8024020). They occur in a narrow zone along the gneiss. TTG gneiss and foliated granitoids (A3Mgn) Foliated, often banded granitoids are distributed in the map sheets of Chioco and Guro, east of the Zimbabwe border. The banding comes from multiple felsic igneous additions to the assemblage, all now gneisses, but also Archaean pegmatitic bands occur. Metagabbroic or amphibolitic bodies or bands occur, in which case the lithology could as well be located to A3Mgd. Upstream the River Múdze, starting from the village of Múdze Chizimwe there are excellent water-washed large outcrops with easy accessibility, showing several different felsic and mafic components as well as complex Archaean fold structures. At the road cuts of Cuchamano the banded gneiss also shows various igneous components. Parallel to the banding there are several narrow shears in these road cuts, most likely being expressions of Proterozoic overprinting tectonic activity. Granodioritic gneiss (A3Mgd) Pale grey, banded granodioritic gneisses with mafic sills are not uncommon in the region but are particularly exposed southwest and south of Guro (Map Sheets Guro and Catandica, SDS 1733 and SDS 1833). They can be seen along the main road from Guro to Catandica at the Macossa road junction and northwards, and in excellent exposures in the slope of the Senga Senga Mountain region NW of this junction. The banding is formed by a gneissose mineral differentiation and, in part, due to quartzofeldspathic veining. On a macroscopic scale frequent thick mafic bands, up to several metres in thickness, occur. Along Senga Senga Mountain slopes the mafic intercalations appear as continuous black bands, well seen from distance, amongst the pale grey gneiss (Fig. 6.3 and 6.4). In the Senga Senga region one can see that the thickest black bands in part swell into big rounded bodies. The biggest bodies are mappable and have been marked on the map (A3Mgb). Fig. 6.3. Mountainside of shallow- dipping Archaean granite gneiss- migmatite, intercalated by mafic, metagabbroic bands. At the root of the mountainside in the bush zone there is underlying Gairezi mica schist. The uppermost crest and the slope behind are in turn capped by Gairezi quartzite – see Fig. 6.4. The site is visible from the local village road, running in the southern side of the Senga Senga ring structure, 25 km west of Guro (0510825/ 8059716). Volume 2 Chapter Six Page 127 Fig. 6.4. Gairezi quartzite continuing along the crest of the mountain seen in the previous picture (0510290/ 8059716). The allochthonous tectonic position of the Archaean slab shown in Fig. 6.3 is illustrated in Fig. 10.1, where the highest ridge in the left hand part of the profile is the same as the ridge in Figs. 6.3 and 6.4. Metagabbro (A3Mgb) and garnet amphibolite (A3Mam) Exposures of mafic rocks are found in places, notably in road cuts. The mode of occurrence suggests the presence of minor mafic intrusive bodies, at the most a few hundreds of meters in size, intercalated in the granitoids and gneisses. One of them can be inspected in the village of Cuchamano and a little east of the village, close to the main road and even in road cuts. The rock is blackish and rather homogeneous apart from some variation imparted by local deformation. A gabbroic protoliths is commonly assumed. There are abundant metagabbroic bodiesamongst the Archaean gneiss. None of them have been found large, as shown by the map. Often they seem to resist erosion better than gneiss and form small, or sometimes high hills. In particular, some 40 km west of the town of Guro, occur several gabbro dominated individual hills, which are more or less rounded in form (Fig. 6.5). However, the amount of gabbro in the hills notably varies. For example, one third of the hill can be composed of gabbro, and the rest of Archaen gneisses. The gabbro is medium-grained, contains cracks and is metamorphosed. Modal composition of hornblende and pyroxene in the rock is about 50 % in total. Some of these metagabbroic bodies may represent, in fact, intermediate sills in origin. Garnet gneiss (A3Mgg) Within the Archaean gneisses occur about 20 – 70 meters wide horizons of garnet-rich gneisses, broadly tonalite to granodiorite in composition (Fig. 6.6). Reddish garnet occurs as broken, aggregatic porphyroblasts several millimetres in diameter. Its modal composition may in the gneiss range from 10 to 30 %. These horizons or layers have gradual contacts to the grey colored TTG gneisses. Locally the garnet gneisses comprise also sillimanite and biotite as main minerals. The origin of the layers is unclear, however, they may represent ancient weathering horizons or recrystallised blastomylonites. Volume 2 Chapter Six Page 128 Fig. 6.5. A hill of Archaean metagabbro and gneiss (0503448/ 8068699). Fig. 6.6. Margin of a garnet-rich layer in Archaean gneiss. SE of the Massanga village (0510867/ 8092125). Scale bar is 10 cm. 6.2.3. Geochemistry Seven rock samples have been analysed from rocks of Mudzi Complex. The analyses are presented in App. 3 (Table 1, anal 1 – 7) and they have been plotted on discrimination diagrams in Fig. 6.34. The analyses are treated and the results are discussed together with the chemistry of the Mavonde Complex in paragraph 6.3.7. 6.2.4. Age Imprecise geochronological data from Zimbabwe suggest that the rocks of the Mudzi Suite were subject to granulite facies metamorphism during mid-Archaean times (~ 3 Ga), reworked and rehydrated under amphibolite facies conditions at late Archaean times (~ 2.6 Volume 2 Chapter Six Page 129 Ga; Barton et al. 1991; Vinyu et al. 2001) and recrystallised during the Pan-African at ~ 500 Ma (Barton et al. 1991; Dirks et al. 1998; Vinyu et al. 1999). The Mapingsa Xenolitic Tonalite (see Section 6.2.1.) has been dated and yielded a poorly constrained whole rock Rb/Sr age of 3247±627 Ma. Samples from Mesocratic Orthogneiss collected close toe the international border produced Rb/Sr ages of 2494±194 and 2937±178 Ma. The latter data are, broadly speaking, in line with the limited geochronology results collected by the GTK Consortium. SHRIMP analyses of zoned zircons of a sample (Mos-7/1284-03) of TTG Gneiss/ Foliated Granitoid (A3Mgn), exposed in an Archaean domal structure (0503824/ 8119250), overlain by Rushinga Group metasediments, yielded three different ages: • Zoned zircons constitute the oldest sub-set with an age of 2713±22 Ma. • These zircons suffered a metamorphic event at ~ 2.54 Ga indicated by zircon neoblasthesis and metamorphic overgrowths. This may represent the phase of reworking and re-hydration under amphibolite-facies conditions for equivalent rocks in Zimbabwe referred to by Barton et al. (1991) and Vinyu et al. (2001). • A young metamorphic overprint – the Pan-African Orogeny – at 520±16 Ma is indicated by wider rim overgrowths on older zircons as well as by a highly discordant age from one, most probably metamict zircon grain. Convential zircon U-Pb dating of similar gneisses (Mos-6/1170-03), sampled some 20 km further to the south (0513666/ 8099303), yields comparable results. The concordia plot of three zircon fractions gives an upper intercept age of 2632±3 Ma. As above, a lower intercept at 554±33 Ma reflects Pan-African overprinting. 6.3. MAVONDE COMPLEX 6.3.1. Introduction Unlike the granitoids of the Mudzi Metamorphic Complex that supposedly suffered Mid Archaean granulite facies metamorphism (Barton et al. 1991), the granitoids (including minor inclusions of mafic and ultramafic plutonic rocks) of the Mavonde Complex have generally a Neoarchaean age (2.8 – 2.5 Ga) without traces of granulite facies metamorphism. Insufficient mapping and geochronological data cannot, however, exclude the presence of older granitoids, in places. They mainly comprise TTG granitoids related to the emplacement of Belingwean-Lower Bulawayan and younger greenstone belts and form a rather uniform and wide domain, extending eastwards halfway between the towns of Manica and Chimoio, in N- S direction along the Zimbabwe border for ~. 200 km, in map sheets Manica/Catandica (SDS 1832/1833) and Rotanda/Chimoio (SDS 1932/1933). In the eastern part of the Archaean Mavonde domain the landscape is smooth and undulating with rare and minor inselbergs. Northerly trending narrow ridges are formed by synclines of Gairezi quartzites. The topographically rises and turns rougher in the western part of the Mavonde domain, close to the Zimbabwe border. The boundary between the lower and higher ground is fault-bounded, as manifested by a prominent east-dipping fault slope at the western side of the town of Catandica, and supposed to originate from the evolution of the East African Rift System. Volume 2 Chapter Six Page 130 6.3.2. Older granitoids Tonalitic gneiss (A2gt) ‘Older granitoids’ are evidenced by a tonalitic gneiss sample (Mos-23/13625-04) collected along the Manica-Chimoio road, 5 km east of Manica (0491095/7904309), in the NE corner of the Vumba Mountain area. The tonalitic rock is partly gneissic with patchy to banded colour variation owing to slight variation in mineral composition. SHRIMP U-Pb dating by the GTK Consortium yields a magmatic Concordia age of 2907±16 Ma. Altered, metamict cores indicate older zircon ages for inherited components. The polygon (A2gt) does not represent the physical boundaries of the ‘Older granitoids’ body but serves to highlight its presence in the map sheet (SDS Manica/Catandica, 1832/1833). The age suggests a correlation with the Sebakwean in Zimbabwe. The width of the rock type in the area is not known but following a few observations it is estimated to be rather limited. Just because of the age of the occurrence its shape on the map has been artificially drawn as a xenolith or an in situ remnant between wall rock bodies of later Archaean granitoids. The occurrence belongs to the western part of the Mavonde Complex where any post-Archaean thermal effects are negligible. Paragneiss with quartzitic intercalations (A3Mpgn) This lithologic unit, exposed over an area measuring 25 x 25 km east of Rotanda (SDS Rotanda/Chimoio, SDS 1932/1933), is also attributed to ‘Older Granitoids’. The unit underlies sediments and metasediments of the Umkondo and Gairezi Groups, respectively. Contact relationships with granitoids of the Mavonde Complex are not clear. Medium to coarsegrained biotite-quartz-feldspar gneiss has typically a heterogenic grain size. Gneiss is in places typified with larger (~1cm) K-feldspar crystals. Minor amphibole and muscovite are found locally. Foliation and lineation e.g. K-feldspar augens are common in addition to small-scale folding. Felsic veins are common as well as biotite rich bands. Boudinaged fragments of amphibolite that probably represent remnants of mafic dykes are found along with mica schists and quartzites. 6.3.3. Manica Group Introduction The Mutare Segment of the Mutare-Manica greenstone belt is an easterly plunging synclinorium that contains a volcano-sedimentary sequence attributed to the Manica Group. The lowermost, volcanic dominated sequence is referred to as the Macequece Formation* (Hunting, 1984). The greenstone lithostratigraphy is not well constrained. Wilson (1979)assigned the volcanic dominated sequence to the ‘Upper Greenstones’ of the Upper Bulawayan Supergroup and the Mbeza metasedimentary series to the Shamvaian Supergroup. However, in some later publications, the Bulawayan Group was interpreted as corresponding to the ‘Lower Greenstones’ (Foster and Wilson, 1984). The preponderance of komatiites with intercalated units of BIF, quartzite, marble, conglomerate, argillite and mafic tuffs is comparable to ‘Lower Greenstone’ sequences elsewhere in the craton (Mberengwa, Filabusi, Buhwa, etc.). The Upper Greenstones may, however, be represented by the thick Volume 2 Chapter Six Page 131 sequences of mafic metavolcanics that flank the central tract of Mbeza metasediments (Vengo Formation* in this Map Explanation) in the eastern half of the belt. The northern and southern margins of the Mutare segment are embayed by intrusive granitoids. In the northern limb of the synclinorium, quartz-diorite stocks at Penhalonga and at the Old Mutare Mission intrude the greenstones. The Penhalonga quartz-diorite-tonalite- granodiorite pluton, dated at 2741±3 Ma (Chenjerai et al. 1993), is the oldest intrusion into the greenstone belt. A broad, ENE-trending zone of gneissic granite, rich in schist inclusions and with km-scale enclaves of mafic and ultramafic rocks, occurs on the north side of the belt. This zone may represent a partly assimilated, north-easterly continuation to the supracrustal sequence. In Zimbabwe, dolerite sills of the Umkondo Igneous Province (see Section 6.6.) are mapped intruding the northern margin of the belt, close to and across the Mozambique border. Macequece Formation* The Macequece sequence is principally constituted of ultramafic and mafic metavolcanic rocks with intercalations of banded ironstone and metachert. Serpentinites are frequently associated with the ultramafic metavolcanics and are often accompanied by talc±chlorite±tremolite schists. The contact between these two rock types is often vague and, from a chemical point of view, gradational. Andesitic, dacitic and rhyodacitic metavolcanic rocks, mostly pyroclastic in origin, are met in the southern slope of the Serra Penhalonga down to the Penhalonga valley, where they underlie metagreywackes of Vengo Formation* (M’Beza Series in Zimbabwe). Their contact relation is unknown due to lack of exposure. To the north, well below the top of Serra Penhalonga, these volcanics terminate against an extensive body of polymict conglomerate. The latter contains poorly sorted clasts of ultramafic and mafic metavolcanic rocks, BIF, chert, jasper and felsic crystal tuff, rock types that all occupy areas north of the conglomerate in the Serra Penhalonga. Lithologies occurring in the southern, downhill side of the con- glomerate, comprise andesitic, dacitic and rhyodacitic metavolcanics and are not encountered amongst the clasts of the conglomerate. Hence, it can be concluded that the intermediate/felsic volcanics south of the conglomerate are younger and overly the ultramafic/mafic rocks. It can be emphasized, that within the Manica greenstone belt the andesitic and rhyodacitic pyroclastic rocks are restricted to the Penhalonga area only, west of the NNE-trending fault zone traversing through the belt passing the eastern end of the Serra Penhalonga and the western end of the Serra Vengo. This prominent fault(zone) divides the Manica greenstone belt into two blocks, the eastern and the western ones, with NNE directed displacement of the eastern block. Talc-chlorite schist, talc schist, chlorite-amphibole schist (A3MMtc) Ultramafic metavolcanic schists make up the most widespread unit within the Manica Greenstone Belt. Rock exposures are rarely fresh and commonly altered to near soil. Even in fresh outcrops, schistose and sheared structures have destroyed the primary features of the variably altered rocks. Spinifex-textured olivine intergrowths are met in rare occasions (Fig. 6.7). Other rarely preserved primary structures include pillow lavas (Fig. 6.8) and fragmentary textures suggesting pyroclastic origin. Volume 2 Chapter Six Page 132 Fig. 6.7. Spinifex textured ultramafic komatiite of the Mace- quece Formation*. (0477781/ 7914693). Scale bar is 8 cm. Fig. 6.8. Pillow resembling structure in ultramafic metavol- canic rock of the Macequece Formation*. (0481904/7914425). Scale bar is 8 cm. Ultramafic volcanics are fine grained, soft, light green to green and greyish green rocks with a smooth surface due to the presence of talc and chlorite. Colours in soft, weathered rock vary commonly from yellowish red to brownish but also whitish colours occur. Chlorite, serpentine and talc form the main mineral constituents evidencing an advanced stage of alteration and metasomatism. Sometimes chlorite seems to be the only mineral in the rock. Tremolite-achtinolite amphiboles are met in more preserved varieties. Opaque minerals are common accessories together with secondary carbonate. Chemistry of these rocks is described in chapter geochemistry below. Serpentinite and serpentine-rich metavolcanic rock (A3MMse) Serpentinites and serpentine-dominant ultramafic rocks form elongated belts and lenses within ultramafic schists. The most prominent belt, approximately 20 km in length and up to a few hundred metres in width, forms a disrupted unit that extends from the southern side of Volume 2 Chapter Six Page 133 Serra Vengo towards Serra Mancota in SSE. After passing Monte Massumba, the belt turns to the north. Locally, mostly altered components of basaltic derivation are met within the serpentinites. Peridotitic rocks have not been encountered, but their presence as relicts in totally serpentinised bodies cannot be excluded, however. Serpentinites vary from dark green, tough, hard and massive serpentinites (Fig. 6.9) to rather soft, deformed rocks. Fibrous asbestos, in veins up to a few millimetres thick, is not uncommon (Fig. 6.10). Relicts of olivine and pyroxene are still occasionally recognisable minerals in the serpentine rock. Secondary magnetite and carbonate are common accessories. The chemical characteristics of the serpentinites are described in chapter geochemistry below. Fig. 6.9. Serpentinite of the Macequece Formation. Serra Mancota (0491879/7912561). Fig. 6.10. An unusually dense set of thin veins of asbestos in serpent- tinite of the Macequece Formation. A fresh cut of the same rock in bottom right. Western end of Serra Isitaca (0469161/7906104). Scale bar is 8 cm. Volume 2 Chapter Six Page 134 Quartz-sericite schist (A3MMqss) Quartz-sericite schist occurs as horizons ranging in thickness from some metres to a few hundred metres and with along-strike lengths of up to several kilometres. The most prominent unit is in the eastern part of the greenstone belt, where the belt swings from east-west direction into the north. Further northwards, the rock grades progressively into quartzite, whereas southwards quartzite forms only thin, cm-thick interbeds. Common bedding structures of the quartz-sericite schist refer to a sedimentary or pyroclastic protolith. Quartz-sericite schist is interbedded and associated with different lithologies and does not occupy a specific stratigraphic level of deposition. Ultramafic metavolcanic rocks and serpentinites mostly enclose quartz-sericite schist. A stratigraphically higher level in the sequence is observed in the area between Serra Vengo and Serra Penhalonga, where quartz- sericite schist is deposited directly above a conglomerate in the bottom part of Vengo Formation*. Quartz-sericite schist is a fine-grained rock with colours varying from generally light grey to grey. Brownish red and light yellowish brown colours are not uncommon either (Fig. 6.11). Quartz is the main mineral component, together with sericite, muscovite and epidote in places. Opaque minerals and