The correct assembly procedures for the transmission pump are as follows: a) Place the pump in the transmission case with the bolts facing inward. b) Tighten the bolts that secure the support to the pump with a torque of 20 N·m (15 lbs. ft.). c) Install the oil seal gasket on the pump body. d) Remove the snap ring, pressure plate, clutch plates, and clutch discs. e) Compress the clutch piston spring with the C-3575-A compression tool. f) Install new gaskets on the piston and on the clutch retainer hub. g) Lubricate the piston and retainer hub gasket flanges with Mopart Door Ease lubricant. h) Install the clutch piston in the retainer hub. i) Install the spring and the retainer on the piston. j) Install the clutch plates and discs. k) Install the pressure plate and snap ring. Remember to follow the manufacturer's instructions and specifications for your specific transmission pump model.
Para escrever sua resposta aqui, entre ou crie uma conta
Compartilhar