Network Appliance NCDA ONTAP NS0-163 Dumps Questions

Prévia do material em texto

NS0-163 
Real Dumps
https://www.certspots.com/exam/ns0-163/
NetApp NS0-163 Real Dumps
1. Which SnapVault option is required to enable the SnapVault service?
A. options snapvault.service start
B. options snapvault.enable on
C. options snapvault.enable start
D. options snapvault.service on
Answer: B
NetApp NS0-163 Real Dumps
2. Which command do you use on the destination storage system as 
the first step to begin the baseline transfer of data?
A. vol restrict destination_vol
B. aggr restrict destination_vol
C. options snapmirror.restrict on
D. options snapmirror.inhibit on
Answer: A
NetApp NS0-163 Real Dumps
3. Which command performs unscheduled incremental SnapVault 
backups from the primary to the secondary storage system?
A. snapvault restore
B. snapvault snap
C. snapvault update
D. snapvault status
Answer: C
NetApp NS0-163 Real Dumps
4. Which authentication protocol is used to establish an iSCSI session, 
and then to authenticate iSCSI initiators at target login?
A. DHCP
B. EIGRP
C. CHAP
D. IPsec
Answer: C
NetApp NS0-163 Real Dumps
5. In an active-active controller configuration, each disk shelf must 
contain___________.
A. two interface modules, each connected to a different storage 
system
B. two interface modules, each connected to the local storage system
C. one interface module connected to the local storage system and 
one interface module connected to the remote storage system
D. one interface module connected to a stand-alone storage system
Answer: A
NetApp NS0-163 Real Dumps
6. What is the major cause for downtime for sites where high availability is 
NOT taken into account?
A. Hardware outage/maintenance
B. Local errors/components or system faults
C. Operator error
D. Planned administrative
E. Building disaster such as a fire
F. Metropolitan disaster such as a flood
Answer: B
NetApp NS0-163 Real Dumps
7. How do you increase the size of a flexible volume?
A. Use FilerView to increase the space on the volume.
B. Use FilerView to increase the size of the aggregate.
C. Use the CLI on the storage system to add space to the aggregate.
D. Physically add disks to the storage system.
Answer: A
NetApp NS0-163 Real Dumps
8. Which statements are true of an active-active controller configuration? 
(Choose three.)
A. Both storage systems must run identical versions of Data ONTAP software.
B. The storage systems and disk firmware must be up- to-date and identical.
C. A pair of storage systems must be of the same model.
D. Both storage systems must have an identical number of disk shelves.
Answer: BCD
NetApp NS0-163 Real Dumps
9. Which file on both storage systems must be configured for 
SnapMirror to mirror results to both systems?
A. /etc/hosts.equiv
B. /etc/hosts
C. /etc/hostname
D. /ete/nodename
Answer: B
NetApp NS0-163 Real Dumps
10. Which file performs the same function as the snapmirror.access 
option?
A. /etc/snapmirror.conf
B. /etc/snapmirror.enable
C. /etc/snapmirror.allow
D. /etc/snapmirror.access
Answer: C
Why Choose Certspots 
Update
Enjoy 6-month 
free update 
after purchase
Format
You can choose 
pdf or software 
version to study
Guarantee
Guarantee your 
passing on the 
first try
Coverage
Collected from 
real exam with 
high coverage
Refund
If fail, 100% 
refund